I want select all blog entries and print them....

Can somebody help me out? I want to clean up my iweb but would like to keep a print out. Does someone know if you can print all entries in one go???
The "select all" is light grey and does not work. It will be too much work to print every entry one by one!

There's a couple ways that I know of, time consuming a bit, but not as much as typing them into word...
1) if on mac go to blog entry, then press ctrl and click your mouse, then hit save as, and select text..
2) the other idea is just to select the text in the blog with your mouse and copy and paste into a text program like word...
good luck.. I've had to do this a few times....

Similar Messages

I want to make address labels and print them out. Does anybody know of a word processing program for Mac that would do this?

I want to make address labels and print them out. Does anybody know of a word processing program for Mac to accomplish this?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

When you create a folder in your Files, why can't we just select all the assets and print or download?

I was collaborating for the first time with a client and thought that, if she uploaded photos to the folder I shared/collaborated with her, that I could just select them all at once and download. Not the case. I feel this needs to be updated and perfected more.

"But what's the reason to seperate diffrent regions from one and another,"
Like most all companies, Apple does not annunce their reasons. With all of the information, regulation, demands from the content providers, governments,etc - Apple has decided to run their business this way. Discussion of their decisions and policies is not permitted here - this is spelled out in the terms of use that you agreed to when signing up for this forum.
" and how can apple prove that you have created a fake adress?"
Form the terms of use of the itunes store:
"You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance."
"I think that they could easely fix this."
There is nothing to fix. This is the way they intended it to be, for whatever reasons. They have much more information than you do and have made their decisions based on that information.

Is there any way to select all mail messages and delete them?

I get lots of mail, and most of it I don't keep, or keep over on my MacBook. Is there a way to select all the Mail messages and delete them, or do I need to go through them one at a time?
many thanks!
Jeannette
<Edited by Host>

In your inbox in the phone you can mark the mails one by one and then tab delete.
In Trash you can delete all with one tab.

Is it possible to select multiple files on the W8.1U1's SEARCH RESULTS window page? For instance, if 10 CPP files are found by the seraching mechanism, can I select all 10 files and have them open in Visual Studio at once?

TIA.

Brandon, this forum member is known since a long time ago an arrogant (he thinks he knows more than every other) and stupid(*) (full of misconceptions). His first post is a very good example of what I just wrote. How does he dare to suggest to use File
Explorer, if W8.1 already has a system built for doing just this search? Do I have to open File Explorer in the folder (or somewhere near) the item I'm looking for? What about the other items in folders above it? This suggestion is stupid(*). He even
asserts that I'm using Modern UI! I'm not! I'm using the desktop, but his misconceptions make him write such idiocies(*) with such arrogance: asserting what he doesn't know (arrogancy and stupidity). And more, this guy is no one to say he/he/he to me, because
I know he is what you deleted from my posts, and more, he is often crying, moaning and snivelling like a spoiled child in this forum and messing up any thread posting stupid(*) images of programs imagined/designed/developed by others. All posts from him in
this thread must be trashed (you should do it). He has nothing to contribute POSITIVELY in this thread, but just to MESS IT UP.
(*) stupid, I can write, after all, you didn't delete this word from this ... poster.
Now, look at the first reply: this forum member has no idea how much stupid is his 'work around'. And this 'work around' does not answer my question and even does address the environment I mentioned: W8.1 U1 search results window page, and not File Explorer!
His second post just reassures me he has no idea what is the searching mechanism I'm talking about. He even mentions Win-w(!) which proves he totally ignore what is the searching mechanism I'm talking about. A user like this one, must have many monitors to
keep him busy looking at them, and having excuses for not read and learn technical documentation. It's ignorance about technical aspects of computer issues that makes him post bad bug report and a bad idea in Connect site:
Using Get-Date -Format "CyM" to work around some bugs
https://connect.microsoft.com/PowerShell/feedback/details/884502/using-get-date-format-cym-to-work-around-some-bugs
Only total ignorance about PowerShell makes someone post such bad 'bug' report. He got critics about his bad post, but I'm sure he doesn't understand.
Column headers for alias should include DisplayName instead of just Name
https://connect.microsoft.com/PowerShell/feedback/details/908152/column-headers-for-alias-should-include-displayname-instead-of-just-name
In fact, the information displayed is already DisplayName, but this guy has no technical knowledge to understand what is happening.
These 2 forum members just messed up a thread that should be free of negative contributions, besides off topic.

How to Create a Parameterized Report - The select "- ALL-" for department and manager not working.

I downloaded the OEHR Sample Objects application and followed the steps in Oracle® Application Express Advanced Tutorials
Release 3.2.
The parameters and report seem to be working correctly except when I enter "all" for department or manager I get no matching hits.
What's the most efficient way to retrieve "all" if the users selects all for dept and mgr - thus we'd want to return all records in the table.
Region snipprt
Enter Search
Search Employee
Dept
- ALL -
Administration
Marketing
Purchasing
Human Resources
Shipping
IT
Public Relations
Sales
Executive
Finance
Accounting
Treasury
Corporate Tax
Control And Credit
Shareholder Services
Benefits
Manufacturing
Construction
Contracting
Operations
IT Support
NOC
IT Helpdesk
Government Sales
Retail Sales
Recruiting
Payroll
Mgr
- ALL -
Steven King
Neena Kochhar
Lex De Haan
Alexander Hunold
Nancy Greenberg
Den Raphaely
Matthew Weiss
Adam Fripp
Payam Kaufling
Shanta Vollman
Kevin Mourgos
John Russell
Karen Partners
Alberto Errazuriz
Gerald Cambrault
Eleni Zlotkey
Michael Hartstein
Shelley Higgins
The following is the sql that was provided as part of the turitoral.
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
     (lower(first_name) like '%' || lower(:P1_NAME) || '%' OR
      lower(last_name) like '%' || lower(:P1_NAME) || '%')
AND department_id = decode(:P1_DEPT,'%null%',department_id,:P1_DEPT)
AND manager_id = decode(:P1_MGR,'%null%',manager_id,:P1_MGR)

Hi,
Use this..
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
    (:P1_NAME IS NULL OR
        (:P1_NAME IS NOT NULL AND
                (lower(first_name) like '%' || lower(:P1_NAME) || '%') OR
                (lower(last_name) like '%' || lower(:P1_NAME) || '%')
    ) AND
    (:P1_DEPT IS NULL OR department_id = :P1_DEPT) AND
    (:P1_MGR IS NULL OR manager_id = :P1_MGR)

Can I select all flagged photos and move to a flash drive

Can I select all flagged photos and move to Flash Drive as a group rather than drag and drop one pic at a time?

Hi David,
One way you can do it is to create a Smart Album, and make the conditions = Photo Is Flagged. That will put all of your flagged photos into a single album. Then you can export that Album to the Flash Drive via File>Export. Once you set up the Export the way you want it, and then click on "Export" it will bring up your Finder Window, allowing you to select the Flash Drive to export to.
Hope this helps!
Cheers,
GB

Display ALL "future" entries and archive "past" entries

Is it possible to display ALL blog entries with a date that will happen in the future (today, and after today and as many as there are, not just 5), and place any blog entries from the past (anything dated yesterday and before) in the archive?
I have too many blog entries regarding items coming up in the future. If I have 8 future items listed, people can only see the 5 that are the farthest into the future - weeks and months from now. They can't the the ones that are two weeks from now, or two days from now without going into the archive - and that's just weird, archiving items that haven't even happened yet. I think Stephen Hawking would take issue with that.
So the simple solution is simply increasing the number of blog entires shown (to like a dozen or so), the better solution is archive the past items, show the future items. I'll settle for either one at this point.
If you can tell me how to do either, you will have made a lot of people's day.
Here's a link to the page if that helps:
http://www.troop29marietta.org/Troop29marietta/News/News.html
Thanks.

So, while I will concede the point that perhaps my desire to have iWeb recognize dates in the future and dates in the past when compared with the current date it has in its brain and treat the archive accordingly, you have to agree the setting of "5" displayed entries is simply a setting that has nothing to do with the conceptions of blogging. Surely there is someway of telling iWeb to display 8 or 12 entries instead of 5. I'll gladly settle for that.
you can set iweb to display up to 50 blog summary entries.
Inspector --> RSS --> Blog pane --> change value of 'Number of excerpts to show'
iweb blog summary/archive entries have date string so you need javascript to compare that to today date.
to display entries with dates in the future just simply hide any entries with dates in the past.
and to display entries with dates in the past just simply hide any entries with dates in the future.
here my example:
http://temp.cyclosaurus.com/CustomBlog_Display/Some_Blog/SomeBlog.html
there are 3 entries in the future, 1 entry for today and 3 entries in the past, you can see all 7 in the rss.xml feed, my javascript hides them accordingly.
you can get the code here:
http://temp.cyclosaurus.com/CustomBlogDisplay/CustomBlogDisplayCode.html

HT4767 Installed "Lion" and lost all calendar entries and all documents. A little assistance pls.

Installed "Lion" and lost all calendar entries and all documents. A little assistance pls.

Installed "Lion" and lost all calendar entries and all documents. A little assistance pls.

I am wanting to transfer sms messages to pc and print them. Can anyone advise me how to do this. i have iphone 3.

Can anyone advise me how to transfer my sms messages onto my pc and print them out? Do i need to purchase software for this and are there any recommended? Thanks.

You can take screen shots on your phone & email the pics to yourself, but the easiest way is to get this software, import them to your computer, then print them:
http://www.wideanglesoftware.com/touchcopy/index.php

How to sort data in PL/SQL table and print them in Order?

Hi Guys
I wan to create a csv file layout as below, maximum we got 12 weeks sales figure for each item. Week is week of the year, it will different every time based on sales_date.
Item Number     Description     Sales Week      27 26 25 24 23 22 21 20..
1234          Sample                10     6     2     8     10
1230          Test                50     60     2      10
I got item number, description, week_no and sales in a temp table which is populated by a procedure. Now I need to write these records from table to a file.
I not sure how to store multiple records for each item in PL/SQL table, sort them and print them in above format.
My select statement is as below
select item_number,
description,
week_no,
year,
opening_stock_qty,
production_qty,
sales_qty,
creation_date,
(production_qty - sales_qty) net_qty
from xxsu_planning_report
order by item_number,year,week_no;
Any help will be much appreciated.
Thanks and regards
VJ

Above error occured because you are trying to concatenate dbms output with some other string, which is not allowed.
Declare
TYPE plan_type IS TABLE OF xxsu_planning_report%ROWTYPE
INDEX BY BINARY_INTEGER;
plan_table plan_type;
BEGIN
plan_table(1).week_no := 24;
plan_table(1).description := 'This is week 24';
plan_table(2).week_no := 21;
plan_table(2).description := 'This is week 21';
for i IN 1..2 loop
dbms_output.put_line(plan_table(i).week_no) || ' ' || plan_table(i).description);
end loop;
END;From your code, I didnt understood what you want to do. Using Associative Array would be wrong approach in this case.
As per your scenario, you have to store max 12 records for each item number.
create or replace type dailySales as object(Description varchar2(100), Sales number, Week number);
create or replace type saletab as table of dailySales;
create table t_sales (p_item number, p_sales saletab);
insert into t_sales values
(p_item, ---------enter value for item number 1
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 1
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 2
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 3
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 4
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 5
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 6
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 7
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 8
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 9
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 10
saletab(dailySales($n1,$n2,$n3)), ---------enter value for sales record for week 11
saletab(dailySales($n1,$n2,$n3)) ---------enter value for sales record for week 12
Enter 0 if no sales exist for any week. Because NULL would throw an exception.
Execute the SQL query to check the output.Try this and let me know if any fyrther issues.

How can I receive data and print them in the smartform INTNOM2_N1?

Hi experts!!
I've to receive data from some tables and print them into the smarform INTNOM2_N1, for example I need to receive the data stext from the table hrp1000, but when I tried to do this, this doesn't work
SELECT SINGLE STEXT FROM HRP1000 INTO WA_FORM_n1-STEXT
                      WHERE OBJID = P0001-PLANS AND
                      PLVAR       = '01' .
   because the data p0001-plans is empty how can I do this? I've tried with
RP_PROVIDE_FROM_LAST P0001 SPACE VERSC-FPBEG VERSC-FPEND, but I think in smartforms we can't use RP_PROVIDE_FROM_LAST because I receive an error message,
Does anybody know how can i do this?!
Thanks a lot,
Regards,
Rebeca

Hi
Please write this code in the smartform and pass on this internal table to the smartform FM..
Also, in the form interface of the smartform declare the table to which u want to pass these values.
The above process will help u to pass values into the smartform from print program.
Regards,
Vishwa.

How do you get a list of your contacts nick names and their phone numbers on line and print them out?

How do you get a list of your contacts nick names and their phone numbers on line and print them out? I've been trying to figure out how to get the list to print out but I can't even find a complete list to view on Verizon's web site. Does anyone know how to do this?

Log into your online account. In the, 'I want to', box type, Manage Contacts.
Place your cursor over any contact, a pop screen will appear with the option to print your contacts

My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

If you purchased it from Apple within the last 14 days then you can return it for a full refund. otherwise no. If you purchased it elsewhere you have to check with them.
Do this to transfer info
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

How can i transfer my songs from my nano to a new itunes account because when i try to it tells me that i need to errase whatever is on the nanno ans then i can sync whats on my itunes but i want to put these songs and store them onto this new itunes acc

how can i transfer my songs from my nano to a new itunes account because when i try to it tells me that i need to errase whatever is on the nanno ans then i can sync whats on my itunes but i want to put these songs and store them onto this new itunes acc

Your i-device was not designed to be a reliable unique storage for your media. It is not a backup device and everything is structured around you maintaining your media on a computer which is itself backed up. Sync transfer is one way, computer to device, matching the device content to the content on the computer. If the computer has nothing on it, the device is set to match the computer's content -- nothing.The exception is purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will probably have to use third party commercial software unless you have an older model iPod. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Additional information here https://discussions.apple.com/message/18324797

I want select all blog entries and print them....

Similar Messages

Maybe you are looking for