I want the Programming pallet to appear whenever I right-click while in the block diagram
I want the Programming pallet to appear whenever I right-click while in the block diagram. Right now I have to look at the Express dialog, arrow down and then click on Programming. I want Programming to pop up first. This has to be dirt simple but for some reason I'm not seeing the solution in Help.
Solved!
Go to Solution.
go to tools...options...controls/functions palette...formatting
Select "Icons only" and "category(standard)".
Now right-click and pin the palette to get to the "customize" button. Select "Change visible palettes..." and click "select all".
see if this is better.
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issue with the wifi?
also i noted that it has only been doing this since quite recently, before it was fine
please help!First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
In iphoto 6.06 I make the red eye changes, it appears to have worked, but when I open the pic again the red eye is back.Advice?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
when I Clicked to update iTunes, appear this message: An error occurred while installing the updates.(103)
Read all 3 pages of this thread: https://discussions.apple.com/thread/4148868?start=15&tstart=0 for possible solutions.
Good luck! -
hi, i don't know what to do i´m desperate in the last few days had appeared brown spots all over one side of the charger and begin to appear on the other side, seem to be burns ....what can i do? :s.... its is the first time it happened this to my charger in my three mac i had ....
Hmmmmm....
Does it get overly hot when used?
Can't decide whether they are the product of overheating or merely that someone sprayed some product nearby, that was incompatible with the plastic.
Ok, si compraste y registraste el equipo, tus datos estan en linea y el proveedor verificara el estatus de la garantia a traves del numero de serie. Tambien lo puedes consultar aqui: https://selfsolve.apple.com/ -
I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
MaxxReboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html -
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
the songs on the iPod on Itunes are grey and can not be changed while in the library are ok, what happen?
Connect the device to your computer.
Open iTunes.
Select iPhone, iPad, or iPod in the Devices list.
Click the Summary tab and select "Manually manage music and videos".
Click Apply.
Even when you have enabled manual management, you can still sync some content automatically. Select any content tab, such as Video, to enable automatic syncing for that type of content. -
Windows 7 O.S. and latest version of FF browser.
Cor-el,
Despite numerous attempts to utilize your suggested "fix" to the disappearing tool bar problem, the results remained unchanged (i.e. tool bar immediately appears for customization, but immediately disappears upon exiting the tool bar customization screen).
In an effort to determine if transactional sequencing may have any impact on affecting the appearance/disappearance of the add-on tool bar, in addition to attempting to resolve the current challenge through the use of the Firefox safe mode and reset tool bar functionality, I also elected to change the sequence in which I modified the desired "customization(s)", as well as the methodology for exiting the customization screen, Firefox safe mode (e.g. click-on Done, exit through X, exit and renter FF safe mode, with and without closing the customization screen, etc...).
Further in addition to following the documented transactions, I also exited and reentered the Windows 7 O.S., as well as exiting and reentering Firefox safe mode and Firefox.
Unfortunately, despite the myriad of methodologies I attempted, the resultant effect remained the same (i.e. immediate disappearance of add-on tool bar, when clicking-on Done or exiting the screen and/or system).
However, I did notice one anomaly, which heretofore had gone unnoticed due to benefits garnered rather than features lost.
Since the beginning of the this recent disappearing tool bar challenge, the add-ons which I select and locate on the URL address line continue to remain on screen, despite the disappearance of the add-on tool bar and all selected add-on "customizations" reflected in the add-on tool bar, regardless of any/other changes.
I want to thank you for your valuable contribution to the "hopeful" resolution of this most recent problem and I sincerely apologize for the delay in responding your suggestion. (During the past few days, we have been entertaining a relative from another country and as a result, I elected not to spend time on the computer). Respectfully, 10pinfvr -
Set label to appear to the right of control/indicator in a block diagram
Hello,
I'm just wondering if there is anyway to set the preference in how label of a control/indicator to appear to the right of the control in a block diagram. I'm doing a lot of routine copying and pasting of controls and indicators, and the labels always appear at the top of the controls/indicators. Thanks for the tip.
PeterPeter Parker wrote:
I'm just wondering if there is anyway to set the preference in how label of a control/indicator to appear to the right of the control in a block diagram. I'm doing a lot of routine copying and pasting of controls and indicators, and the labels always appear at the top of the controls/indicators. Thanks for the tip.
If you copy&paste a control, the label will jump back to the default location for the pasted control.
There is a better way! It makes copying a control faster and retains the label location:
select the control you want to copy
hold down the [ctrl] key and drag the terminal to a new place.
You will have a copy of the original control at the new location and the label position is the same.
(Darren would probably call that a Nugget© )
LabVIEW Champion . Do more with less code and in less time . -
Why do the appearance of my customized control change while changing the size of window?
Hi,
I want to show the direction of power flow, so I customize an arrow-like slider, the width of the line is set the width as 3, and the height as 80. It can work. However, when I change the size of the window, the line of the slider is changed , and it looks quite ugly. How can I solve this problem.?
JessieFirst, as you found out, the "scale all object on front panel as the window resizes" doesn't really work very well.
Second, what you're saying is that all your controls won't fit on the screen? What resolution is the screen? Typically manually sizing and placing objects on your front panel is the best way to get everything placed correctly. In addition, I have often found that an inability to fit everything on the screen is an indication that the interface is too busy.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
cloud has appeared on my laptop although Iam not aware of having downloaded it: as a result only the items I have purchased appear in my library and i cannot access all the songs I have imported from my own CDs. How can I find them?
If the music is purchased through iTunes:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
If the music is not purchased through iTunes:
Senuti — Recover music from your iPod, iPhone or iPad to your Mac -
An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later. Is anyone getting this msg when trying to obtain a radio station?
Check the More Liike This box oon the right, or do a search of this forum.
Radio seems to have issues now. -
Whenever I right click on any link the link gets opened in new tab
Whenever I right click on any link, along with context menu pop up (Correct property) the said link also gets opened in new tab (next to running tab in background : wrong property) Initially I thought it is due to one of the add-on installed on searching I find I installed add-on Right Link so I removed it still instead of just opening context menu the link also was getting opened as described so I reinstalled the add-on Right Link and tried to disable it via option provided by them (A status bar button, F2, a tool menu option) and confirmed in about:config that value of extensions.rightlinks.enabled;false, still could not stop opening link when I right click on it
Now I wonder whether the said add-on is culprit or any other add-on is responsible for this behavior ?If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
You can first strict the enabling to tab related extensions and extensions added by security software.
If you have many extensions then first enable half of the extensions to test which half has the problem.
Continue to divide the bad half that still has the issue until you find which one is causing it. -
It is very frustrating. It will not come up as an option in the 'import video' window. I can only import video that is recorded from the 'in built' camera on my computer. Any one know how I can overcome this?? I would really appreciate any help.
it takes too long... and the computer (macbook air) gets very hot when I do that. it worked 2 weeks when i tried it but as it was new then, i wasn't paying attention at how or what I did to get it. So I know the camcorder is compatible etc. And I don't think I changed settings either. It is very strange. Thanks for the reply though.
Maybe you are looking for
-
ServerSocket: Listening on same port with different addresses
It seems this problem has been gone over before, but with no solution. If I try to set up a pair of server sockets, one on 127.0.0.11:5000 and the other on 127.0.0.22:5000, the second one seems to overwrite the first one. I've been able to accomplish
-
Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I a
-
Planned order & Purchase Requisition
I want SAP to create Pur Req not planned orders. Is that the release strategy issue? 1) Planned order 2) Purchase Requisition 3) Purchase order Can I setup SAP to by pass planned order and go straight to pur recs for purchase parts ?
-
Printer driver s for Canon i70
I have a G4 powerbook and I also have a Canon printer i70 and it has been used a bit when I travel - on various computers. I want to add it to this Powerbook but I cannot find a driver on the web. Lots of efforts to sell me driver doctor and so on, a
-
Hi, Do you know any user exit or BADI which triggers after save VF01 (Billing document), actually I need to modify the payment terms field in the VF01 while save. Used program RV60AFZC to modify payment terms field but it does triggers before save. <