I want to capture a video on a website. i heard i could do this by finding the cache of it. but i can't find the firefox caches at all on my mac. please advise, thanks!

or any other hints about capturing a video would be helpful, thanks.

To help other users find solutions, please return to this Thread and '''Sign-in''' to the
forum with your Username and Password:
click on '''"Solved It"''' next to the reply ABOVE that '''BEST''' solved your question
'''DO NOT click "Solved It" next to this reply

Similar Messages

When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

The system on the original install dic is probably looking for the original video card.
It may be possible for someone with the right skills to make an install disc for you with the driver for your new card.
As I recall from my early days of being a Macuser, If you held down a key, (spacebar?), while starting it would open a dialog to take you through a monitor setup.

HT4906 If I update iPhoto, will it transfer all my existing photos to the new version? Please advise, thank you,

If I update iPhoto, will it transfer all my existing photos to the new version? Please advise, thank you, BKSunshine

Yes - if nothing goes wrong - which is why you must always have a good current bacup prior to any update/upgrade
LN

Please advise how I can register my Photoshop Starter Edition when I apply I do not receive an unlock code so I am unable to continue to use the program and all my photos are locked in, please advise, thanks John

Please advise how I can register my Photoshop Starter Edition when I apply I do not receive an unlock code so I am unable to continue to use the program and all my photos are locked in, please advise, thanks John

Please refer to the appropriate Forum, this one is dedicated to Photoshop proper.
Photoshop Album Starter Edition

Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks

Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks

You probably need to delete your preview cache. See here
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
Preference and other file locations in Lightroom 5

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

If you are using Lion:
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

My Time Machine backup keeps failing. I get a message the "Volume has the wrong case sensitivity for a backup". Please advise.

My Time Machine backup keeps failing. I get a message the "Volume has the wrong case sensitivity for a backup". Please advise.
Thanks, Howard

You can change the case sensitivity of the sparsebundle.. but I really doubt the error is real.
See A8 here.
http://pondini.org/TM/Troubleshooting.html
The sparsebundle should have case sensitivity turned on.
I cannot even fathom how it could have changed.
Let me recommend before you start fooling around with the sparsebundle.
Do a full network start.
Power everything off.. start up modem.. wait 2min.. power up the TC.. wait 2min.. power up any other network gear like switches.. wait..
Now power up the computer and try it.
If the error is the same.. I would do a factory reset of the TC.. give it all short names, no spaces and pure alphanumeric. Then reset TM .. see A4 in the same reference as above.. and do a verify of the backups.. A5 above and try the backup again..
No luck..
Then erase the TC and start over.. it is sometimes necessary as TM does get itself in a knot.

When I updated the new version and used icloud, some of the apps are missing, how can I find those apps(but i was not using my account to download some apps before). Please advise.

When I updated the new version IOS5 and used icloud, some of the apps are missing, how can i find those apps (but i was not using my account to download some apps before). Please advise.

They are free to iOS 7 users who have activated their NEW device on Sept 1 2013 or after. They are NOT automatically free with iOS 7.
AirDrop is only compatible with iPad 4th gen and iPad mini. iPad 3rd gen and below do contain the necessary hardware for AirDrop. Also, AirDrop is only compatible between iOS devices. You cannot AirDrop between iOS device and Mac OS.

I modified the first business card in a template. Does anyone know how to get the other cards on the template to look like the first one without doing each individually? please and thanks!

I modified the first business card in a template. Does anyone know how to get the other cards on the template to look like the first one without doing each individually? please and thanks!

http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter

Hello, I have downloaded the new update to my iPhone 4 but I can not instal it , gives me a error signs would you please help me thank you. Nasser

Hello, I have downloaded the new update to my iPhone 4 but I can not instal it , gives me a error signs would you please help me thank you. Nasser

Please identify the error.

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blue yonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blueyonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

And, you are sure you have provided the correct username and password for you email account? I'm not familiar with Virgin media, so you might contact their tech support to find out why you are having a problem sending mail but none receiving mail. I assume your mail account has always been POP3 and not IMAP. Typically, the outgoing mail servers are not the same for the different types of account service.

I have been trying to put some of my music and artwork, on youtube. Youtube says you need an encoder to upload music. But the problem is the only encoders available are for windows. Please help, thank you

I have been trying to put some of my music and artwork, on youtube. Youtube says you need an encoder to upload music. But the problem is the only encoders available are for windows. Please help, thank you

The formats YouTube supports can be found here:
http://www.google.com/support/youtube/bin/answer.py?answer=55744
Since YouTube supports AAC, the file format iTunes uses by default, it's probable you don't need any sort of converter.
If you continue to have problems with uploading to YouTube, I'd suggest you ask for assistance in their forums:
http://www.google.com/support/forum/p/youtube?hl=en
Regards.

Have upgraded to 5c and want to give my 4s to parents. Trying to get 4s back to 'factory settings' as was when bought but cannot remember restrictions passcode. If I erase all content and settings will that take it back to how was when bought? Thanks.

Have upgraded to 5c and want to give my 4s to parents. Trying to get 4s back to 'factory settings' as was when bought but cannot remember restrictions passcode. If I erase all content and settings will that take it back to how was when bought? Thanks.

Hogey1301 wrote:
Trying to get 4s back to 'factory settings' as was when bought but cannot remember restrictions passcode.
Restore the Device as New... See Section 6 here...
http://support.apple.com/kb/HT4137
Hogey1301 wrote:
Have upgraded to 5c and want to give my 4s to parents.
Follow the Check List here...
What to do before selling or giving away your iPhone, iPad, or iPod touch

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

Vere Clarke
Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
So, you can have both on the same computer, but only open one for your work.
The classical recommendation is to finish a project in the version in which it was created since there
is no guarantee that a project from an earlier version will open in the later version. Probably will, but
no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
take the earlier version project into a later version one, you cannot go back to edit the later version edited
project in the earlier version program.
If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
(Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
Thank you.
ATR

I want to capture a video on a website. i heard i could do this by finding the cache of it. but i can't find the firefox caches at all on my mac. please advise, thanks!

Similar Messages

Maybe you are looking for