I want to change the massage text of the error code C2039

I want to change the massage text of the error code C2039. Currently its coming in production order release as C2039: Release rejected (check log).
I tried in OPJB but didnu2019t allow me to change the error massage text.
Can someone let me know the configuration for this?

Dear,
Go to SE91 enter the Message class = C2 and Message Number 039 then click on change icon then hit on Maintain in logon langauge
Here you canchange the Message text and save it.
Regards,
R.Brahmankar

Similar Messages

Sub: Our Client wants to change the existing Release procedure.

Dear Friends,
Requirement:
Our requirement is to remove one of the Release Code from the existing release sequences, with out affecting the old Purchase Orders.(including Released and Partially Released)
Changes we done:
Once we remove the specific release Code and found that it affects all the Purchase Orders (both Released and Partially Released) which are relevant to this removed code.
Is there any other way to do this changes with out affecting the old Purchase orders (we don't have Work flow in the Release Strategy).
Regards,
Dhan

Hi,
If you want to change the release code, then what are the open order which or not released and in process make sure those PO's are released then you can change the release code.
Else System wouldnt allow you to process further, then you need to create new PO's, So avoiding this first release all the open PO's and partial release PO's then you do change the release code.
Thanks & Regards,
Dhanush.

Formatted Search that will change the Tax code in SO.

Hi All,
I have a requirements that will allow me to change the Tax Code column via formatted search. Like for exmaple, i have 50 line items in SO and the tax code is ZO. If i want to change the tax code, i will select it for individual items. Anyone can help me to have an alternative solution that will prevent me to change it per item.?
thanks and regards,
vin

Hi Melvin........
You can have a work around for this....
Just create a UDF say U_Tax at Header level...
Just Create a FMS for Tax Code say..
SELECT * FROM OSTC T0
Save this tax code FMS to thus UDF.
When yo select a particular Tax Code in this Field through this saved FMS
this Tax Code gets copied to each and every line say for 100 lines also.
For this you have run other FMS which is below...
SELECT $[ORDR.U_Tax.0]
Save above FMS in tax Code field say in Sales Ordr form.
Now when you do this you can see if you have 100 line items and you want to copy same tax code in a single click you have to just select single tax code via FMS in U_Tax as i suggested.
The moment you select this Tax Other FMS will be fired and the same will be copied to other 100 lines....
Hope this will help you.....
Regards,
Rahul

Change the tax code at order header level that reflect the change in all it

Dear consultant,
Change the tax code at order header level that reflect the change in all items lines under this order
Facts:
Define tax code,
Assign it to bill & ship to customers,
I do all setup in oracle receivable guide for defining tax
Examples: I navigate to order management to create order
First I select the customer and order type after that I navigate to tab line
I enter the item in the first line the tax code coming by default
I enter the second items line also the tax code coming by default etc three ,four, five until line 40
Now I want to change the tax code for all items but not by enter and change it in each line? No,
I want the way that I change Tax Code at order header after that the change is reflect in all items line
Business Impacts:
Suppose I create order include 40 items , I want to change the tax code that coming by default , that require me to enter in each line to change tax cod 40 times ,this not logic and not acceptable from my customer

Hi,
The defaulting rules apply only for the first time when you are adding new lines on to the Sales Order. Respective field vaues will be defaulted from the SO header level.
In case, if you want to update all the 40 lines for Tax Code in one shot, then please select all the lines on the sales order, try Mass Change.
(Navigation: Tools->Mass Change).
Regards,
Hemanth

I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

Highlite the text inside the text box and then press Ctrl+E.

Hi there, I want to change the background-color of the browser, when a popup-picture is shown. This picture pops up by clicking a hyperlink in the text...can anyone help me please...thanks a lot

Hi there, I want to change the background-color of the browser, when a popup-picture is shown. This picture pops up by clicking a hyperlink in the text...can anyone help me please...thanks a lot

Hi,
CSS is interpreted by your browser, so server cache seems unlikely in htis case. There is however some hierarchy in CSS, so parts of the APEX CSS, theme CSS or page CSS might overwright or block yours.
Does changing the CSS on runtime affect your page? Eg, run the following in your browser console and see if your page turns black: $('#uBodyContainer').css("background-color","black")
Also try moving up your css in the hierarchy labeling it as important:
div#uBodyContainer {
background-color:#000000 !important;
See:Assigning property values, Cascading, and Inheritance
Regards,
Vincent
http://vincentdeelen.blogspot.com

I want to change the selection text in the standard report/transaction .

I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction

Hi,
>
scoy123 wrote:
> I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Refer:-
CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c_comment.
PARAMETERS : p_matnr TYPE matnr.
SELECTION-SCREEN END OF LINE.
Hope this helps you.
Regards,
Tarun

Want to change the SQL Server Agent Job History Text Files Location

We have SQL Server 2014 installed on a couple servers, but they were not consistent on directory paths during the installs. I am trying to get the servers to all match.
On one server, SQL Server the Agent Log and Job History files were being written to [H:\Data Root Directory\MSSQL12.MSSQLSERVER\MSSQL\Log].
I want to change that to [H:\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log] to match the other server.
I have ALREADY gone into SSMS - [SQL Server Agent] - [Properties] and changed the "Error Log " "Fle Name" to [H:\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\SQLAGENT.OUT]. And that is working great.
In [SQL Server Configuration Manager] - [SQL Server (MSSQLSERVER)] - [Properties] - Startup Parameters entries have been changed to the new path (-d, -e, and -l), and under [Advanced] both Data Path and Dump Directory are pointing to the new path.
In [SQL Server Configuration Manager] - [SQL Server Agent (MSSQLSERVER)] - [Properties] - [Advanced] Dump Directory is pointing to the new path.
However, the job's History text files are still being written to the old path.
There is no setting in the Jobs or the Maintenance Plans that controls the history file location.
I have searched the registry and changed three settings from the old path to the new path. The registry does NOT contain any more references to the old path.
I rebooted the server, but when the jobs run their history text files are still be written to the old path.
Does anybody have any ideas?? Thanks

I checked the [Job] - [Step] - [Advanced ] - "Output File", and the field is blank.
I then reviewed all the tabs and left menu items in the Job...I cannot find any where the references the old path.
I then went to the Maintenance Plan and checked every thing there. Still cannot find what is referencing this old path.
SQL Server is also still writing xel files to this old path...if that offers any clues.
The text file being generated is the recap of the Job run. Starts with this:
Microsoft(R) Server Maintenance Utility (Unicode) Version 12.0.2430
Report was generated on "xxxxxxxxxxxxxxx".
Maintenance Plan: SQL_Backups_Log
Duration: 00:00:03
Status: Succeeded.
Details:
Thanks for the ideas....

I want to change the cantry because I used us voucher and now the remanding only 0.05 and now I want use my Saudi credit card but give massage I have to finish the balance and nothing I can by by this amount I need to remove the balance to change the city

I want to change the cantry because I used us voucher and now the remanding only 0.05 and now I want use my Saudi credit card but give massage I have to finish the balance and nothing I can by by this amount I need to remove the balance to change the city

Click here and ask the iTunes Store staff to zero your account balance.
(105215)

Rs to do, and I selected the font for each 4s clip - now I want to change the font - is there a way to change all fonts on clips in one go?

Hi I am new to iMovie - and made a 35min film - quite pleased with it - I sub-titled it right through coz we work with deaf people - wanted my first movie to be accessible. Now I want to change the font on each clip - can I do this in one step - and change all the sub-titles to a different font - thanks a lot, Jane

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

I want to change the "blinking solid line cursor" to something that is easier to see when typing in a url or like on this line where I type this question.

I want to change the "solid straight blinking line"....to something easier to see. It is really hard to see it especially in the box where one types in a URL. Thanks

You can widen the "I-beam" cursor but if I recall correctly, the thicker it gets the more it will overlap the text to some extent so that can sometimes affect readability.
The following thread has the "under the hood" settings for this: [https://support.mozilla.org/en-US/questions/900479 Size of the text cursor (insertion point)?]
Can you get a display that you like?
''Edit: The problem I remembered was when the blinking was turned off. See [https://support.mozilla.org/en-US/questions/949937 i need smth like `ui.caretInvert: true`].''

I want to change the security questions for my account , For I have forgotten

I want to change the security questions for my account , For I have forgotten

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security, choose country, then click
Continue;
6. Under ‘more options’ choose/click/tap the email icon. Fill out the form with your contact information. Describe your issue in the text box. ‘Cannot remember answers to security questions, need to have them reset’.
You should get a response within 24-48 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service

Want to change the menu name in VA22

Hi folks,
I want to change the menu of VA22 i.e. i want change the description of the menu in va22.
How can i do this.

Hi Sandipan,
You can do that using transaction SE63
Once you enter SE63, in the command box enter t and enter.
Then enter the component attributes R3TR PROG SAPMV45A
Then click on Edit.
Temporary Worklist -> ABAP Texts -> <CA4> Interface Texts (PROG) -> Double click on SAPMV45A VA
There you will find all transaction interface texts and can be changed here without needing an access key.
Cheers.

Want to change the BSEG-SGTXT while process through the transaction:FF_5

Hi,
I want to change the value in BSEG-SGTXT during the process through the transaction:FF_5.
Can any one suggest any BADI or User Exit to update the SGTXT.
Regards,
Hema T

Hi
If your text is going to remain content based certain transaction types or text in the note to payee field then you can use the below functionality.
Advantage no ABAP help required.
Define Search String :
Strg Name : Text
Strng : Test (say if you want to find the word "test" in the incoming record. You refer the help doc on Search string for combinations)
Mapping : (keep it blank)
In Search string use :
1)
Company code :
House bank id:
Account id:
Int algthm : (if you are using any)
Strg name: Check
Target field: BDC Field name1 BSEG-SGTXT
2)
Company code :
House bank id:
Account id:
Int algthm : (if you are using any)
Strg name: Text
Target field: BDC Field value1 "text that you want to enter in the Bseg- sgtxt field"
3)
Company code :
House bank id:
Account id:
Int algthm : (if you are using any)
Strg name: Check
Target field: BDC Acct type1 0
0: First line, posting area 1
1: First line, posting area 2
2: Second line, posting area 1
3: Second line, posting area 2
Regards
Nikhil

Want to change the labels on the buttons on search criteria

Want to change the labels on the buttons on search criteria as i work on Arabic ADF Project
i want to change the label of "SEARCH" button , "ADVANCES SEARCH" , "BASIC" , "SAVED SEARCH"
i don't know how to change this labels as when i drug search criteria over the form i don't know how to change this fields
thanks i advance

Hi,
Arabic language is supported by ADF Faces RC on the fly. When you incorporate localization in your application and set the locale attribute of your page's <f:view> tag to "ar", the labels of the query component will already be shown in Arabic. Please see sample code snippet below:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view locale="ar">
....Please see the following blog-post for details: http://soadev.blogspot.com/2010/03/adf-faces-rc-supplement-on-how-to.html
regards,
Pino

I want to change the massage text of the error code C2039

Similar Messages

Maybe you are looking for