I want to connect my Canon EOS 7D to my MacBook Pro and use it as a Monitor
Hello,
Anyone know how I can turn my MacBook Pro into a Monitor for my Canon EOS 7D HDSLR camera?
Thanks for any advice,
fsg
NYC
I don't think you can without some sort of capture card (very expensive, and because most MacBook Pros don't have a card, you need to use the FW800). MBP's Thunderbolt port only sends video signals out, you can't attach an HDMI to Mini DisplayPort cable from your camera to the MBP and expect to show video.
You could try a utility like Sofortbild.
Similar Messages
-
I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks
Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots. -
I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation to this one.
Eels290776 wrote:
if my external hard drive is not connected to either of my machines, and I download something onto my iMac and then something different onto my Macbook, where are my machines going to be storing the new downloaded media
when the drive is not connected, +iTunes media folder location+ will default back to <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)
and when I next connect the external hard drive how will I easily get the newly downloaded media onto the external HD
you'd have to point +iTunes media folder location+ back to the external via preferences > advanced > iTunes media folder location, then file > library, organize library > consolidate files
and essentially, to have it easily readable on both machines?
in that case it might be best to copy the entire iTunes folder to the external. then, on each machine, launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and navigate to the iTunes folder on the external.
note only one iTunes can access the iTunes library @ a time !
also, make sure the external is mounted on either machine before launching iTunes.
JGG -
I have a license for CS6 on my MacBook Pro. I want to purchase an iMAC and be able to do my heavy duty Photoshop processing on this new iMAC when I am at home I need to keep CS6 on my MacBook Pro and use it when I travel. How can I have copies of CS6 on both machines. I am the only user of this software.
You can install and activate CS6 on both machines perfectly legally.
-
i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!
<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html> -
I have facetime on my Macbook pro and the person I am trying to talk to has the same. It rinfs but wont connect, Any ideas please
Hello, SoonerAnesthetist.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Cheers,
Jason H. -
Can I connect an older larger iMAC to my new iMAC and use it as a monitor?
I am very happy with my new 21.5" new iMAC.
However, I may keep my older 24" iMAC if I can get a way to use it as an additional monitor for my Photoshop work.
Is it possible, then to use the older, larger iMAC as a secondary monitor, the computer controlling the whole set up would be the new 21.5" iMAC with its 12 GB RAM?
If so, what is the procedure and way to connect both?
Thanks in advance.The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
You would need to find a 3rd party dispay extender app to accomplish this. The results may or may not be acceptable to you.
http://www.macworld.com/article/1156288/imac_second_monitor.html -
I want to sell my Canon EOS 6D with bundled Lightroom and Elements. May the purchaser use the bundle
I want to sell my Canon EOS 6D with bundled Lightroom and Premiere Elements. May the purchusar use the bundled software?
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR -
I have my new HD in a USB enclosure connected to my MacBook Pro and I want to put a fresh copy of Mountain Lion on it. I'm told that I need to boot from the Installation Disk to start. But I do not have an install DVD as I got ML as a download from the App Store. Can I download ML from the App Store again, but this time directly to my new HD?
Create a data recovery/undelete external boot drive
You can also use Carbon Copy Cloner to clone your present setup to it and boot from it.
Most commonly used backup methods
However, SOME external enclosures are not bootable, you will soon find out. -
Retina display macbook pro and want to run two monitors with only DVI connections
I have a retina display macbook pro and want to run dual screens using two Yamakasi monitors with DVI connections what do I need to do this,
Hello TonyLoan,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
For each display you want to use, connect a video cable (and adapter, if necessary)
About Apple video adapters and cables
http://support.apple.com/kb/ht3235
Apple Mini DisplayPort to DVI Adapter
Have a nice day,
Mario -
I just purchased a macbook pro and I am trying to connect my canon MG 5220 to it. I lost instal disc
I have just purchased a macbook pro and I am trying to connect my MG5200 to it. I have lost my installation disc. Please Help! Thank You.
Hello.
You can download the necessary files from the following website:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg5220#D...
If you need additional assistance with the process, please contact us at http://bit.ly/Phone_Support for further assistance. Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I wanted to connect my pc screen to my mac book pro.
I wanted to connect my pc screen to my mac book pro. so i brougth a dvi adapter. when i put the cabels in it was working, but every time i put the cables into the mac book pro my internett connection shuts down . why? pleas answer....
i have this adapter : http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA3Ng&mco=MTA4NDU0ODY and when i am puting it itnto my mac book pro and then takes the dvi cable from my pc screen and puts it into the adapter its working but the internett connection shuts down.
thanks for answares
sorry for my bad english -
When i go to settings and i want to connect with wifi it says no wifi, just that and i cant tab on it or something, what shoud i do???
Try here. Frequentlyit is a hardware problem and an appointment at the Genius Bar of an Apple store is inorder.
iOS: Wi-Fi or Bluetooth settings grayed out or dim -
I have a macbook pro and I want to use my canon firewire digital video camera on yahoo chat. When I sign on to chat and attempt to use a camera, the system automatically defaults to the built in camera on the notebook. Can I override that default?
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.
Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.
Maybe you are looking for
-
Okay, so I just got my new 5s last weekend and the rear camera already does not work. Upon opening the camera app, the screen goes black and the app closes. When trying to get to the camera by sliding up from the lock screen, the apple logo appears a
-
Remove or Delete monitor display preferences as defined by the User -
The clarity and resolution of my display seems to have disappeared. It is currently set at 1440 x 900 which is usually fine except when I start-up, my screen loads what must initially be the default settings - which are perfect - then after a couple
-
Consolidating Podcasts into one 'Album'
I have imported a number of podcasts, into my 'Podcast' folder in iTunes. How do I consolidate 4 'Albums' into one, within my 'Podcast' folder?
-
Hello, Designer 7.1 crashes while loading xsd schema with xsd:include I've tried with absolute path: and relative path: and results are the same: no message, the only thing to do is to kill Designer I am working with 7.1 french version Can somebody h
-
ITunes Rental Video Does Not Play in iPad
I downloaded a rental video, and every time I try to play it from the iPod function in my iPad it crashes. What's up with that? I just upgraded to the new IOS. Message was edited by: Steven Kinzler Message was edited by: Steven Kinzler