I want to disable Internet access to user using GPO

I am using Win Server 2008 R2, I want to disable the users from accessing Internet which are in that OU. Can anyone tell me how is it possible ?

Hi,
 Disabling Internet access using software on the client is inherently difficult. The client isn't aware of what is an internal resource (like an Intranet page for example) as opposed to an Internet resource. You can use GPOs to disable specific programs
(like browsers) or to change how traffic is routed by the client but in order to effectively control who can and can't access the Internet, your best bet is a perimeter device like a proxy or firewall that sits between your clients and the Internet and is
integrated with AD so it can manage access to the Internet based on users, groups, IP addresses, etc.
 The closest you can come without a proxy is to configure a proxy server address for those users using the Internet Explorer Maintenance component (found under User Configuration\Windows Settings). This proxy can either be a non existent address or
if you want more control over the error messages users get, it can be an internal web server with a page that provide a custom message. The same configuration will allow you to list specific URLs that are exempt in case you have specific web sites, internal
or external that must be available.
 Note that this option will apply to all browsing, internal and Internet based, but will only impact IE. Internet access using other browsers or other software will not be impacted unless that software leverages the IE proxy configuration (which many
applications do). 
Hope this helps,
Guy

Similar Messages

  • How to disable internet access during Adobe AIR installation

    Hello,
    I am trying to install Adobe AIR in an enterprise environment on numerous clients.
    Unfortunately the installation procedure always tries to open an internet connection during installation.
    As all users in our company require proxy authentification for internet access, the authentification dialog of our proxy always shows up when installing Adobe AIR. So the installation can not be processed without any user interaction.
    We would like to install Adobe AIR silently in the backround. So we are looking for an opportunity to disable the internet access during AIR installation.
    Thanks for any help,
    Alex

    Hi Alex,
    You might want to give the Settings Manager a try (located at the bottom of this page.)  However, I suspect the network might still be pinged regardless of this setting.  Please let me know how it goes.
    Thanks,
    Chris

  • How do I disable internet access to all Adobe CS6 programs?

    Thank you

    They're all activated and everything. That process went smoothly. It's more genuine curiosity and I like being able to manually update everything and connect them when I want. And I just get paranoid with things like that running in the background haha. Is there anyway to change preferences and stuff like that in regards to internet access?
    Edit: Actually, I think I managed to figure it out myself I'll let ya know if I run into any problems.

  • Restricting owa 2013 from internet for group users using ARR

    I am trying to restrict owa access from internet for group of users using ARR.
    http://www.msexchange.org/articles-tutorials/exchange-server-2013/mobility-client-access/iis-application-request-routing-part1.html
    please suggest

    Hello,
    Thank you for your question.
    This is a quick note to let you know that I am trying to involve someone familiar with this topic to further look at this issue.
    Regards,
    Winnie Liang
    TechNet Community Support

  • No Internet access when I use a certain static IP yet other IP's are ok.

    Hiya,
    Strange IP issue !!!
    I have a windows 2003 sevrer with a static IP.
    My network has a DHCP server and that Particular IP is in the exclusion range.
    When I open a browser on the server I get the error "internet explorer cannot display the webpage"
    However if I change the static IP address to a defferent static Ip address everything works fine.
    Here's the funny bit.
    If I set a different PC to this troublesome static IP I also get the issue.
    So the problem is with the Static IP address itself?
    On the DHCP server there is no indication that this is a BAD IP ADDRESS etc..
    Checkeded the firewall an this is not blocking either.
    Any ideas why this particular IP fails to get me internet access ?
    Ray..

    IP with no internet access (IP Issue)
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
       Physical Address. . . . . . . . . : 00-14-5E-BD-C2-0C
       DHCP Enabled. . . . . . . . . . . : No
       IP Address. . . . . . . . . . . . : 10.1.3.150
       Subnet Mask . . . . . . . . . . . : 255.255.254.0
       Default Gateway . . . . . . . . . : 10.1.2.254
       DNS Servers . . . . . . . . . . . : 10.1.3.145
                                           10.1.3.146
    IP with internet access working (Normal IP)
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
       Physical Address. . . . . . . . . : 00-14-5E-BD-C2-0C
       DHCP Enabled. . . . . . . . . . . : No
       IP Address. . . . . . . . . . . . : 10.1.3.167
       Subnet Mask . . . . . . . . . . . : 255.255.254.0
       Default Gateway . . . . . . . . . : 10.1.2.254
       DNS Servers . . . . . . . . . . . : 10.1.3.145
                                           10.1.3.146
    DNS Server
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
       Physical Address. . . . . . . . . : 00-14-5E-BD-CB-20
       DHCP Enabled. . . . . . . . . . . : No
       IP Address. . . . . . . . . . . . : 10.1.3.145
       Subnet Mask . . . . . . . . . . . : 255.255.254.0
       Default Gateway . . . . . . . . . : 10.1.2.254
       DNS Servers . . . . . . . . . . . : 10.1.3.145
       Primary WINS Server . . . . . . . : 10.1.3.145

  • No internet access when i use my notebook into a router

    I am trying to use my notebook as a repeater.
    I enabled the  MS Virtual WiFi Miniport Adapter and configured it with a SSID and password.
    The connection seems to be alright, but when connecting my phone to this connection, I get no internet access (the phone is connected and receives an IP with no problem, but when trying to connect to the internet, as if there is no connection).
    I am running windows 7

    I am trying to use my notebook as a repeater.
    I enabled the  MS Virtual WiFi Miniport Adapter and configured it with a SSID and password.
    The connection seems to be alright, but when connecting my phone to this connection, I get no internet access (the phone is connected and receives an IP with no problem, but when trying to connect to the internet, as if there is no connection).
    I am running windows 7
    wifi repeaters are specialized and its cheaper and easier to get one on ebay, they are low cost and are popular to deal with dead spots with wifi both with business and homes alike
    Corsair Carbide 300R with TX850V2
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler)
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 Professional x64
    Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M
    Place your rig specifics into your signature like I have, makes it 100x easier to understand!
    Hardcore Games Legendary is the Only Way to Play!

  • Way to identify transactions accessed by user using portal

    Hi,
    We are trying to obtain statistics of the transactions used by a user and frequency of use by the same user using the portal. We would like to obtain the user id and the transactions accessed.
    Is there a table or a log created by the EP to capture the same or is there any option in the settings which can capture the info going forward.
    We use EP to access BSP applications and ITS transactions.
    Any information on the logging capabilites of EP is appreciated.

    Hi,
    Check the link below on creating a portal activity report iView.
    http://help.sap.com/saphelp_nw04s/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
    Portal activities are obtained from the following set of tables(I guess)
    WCR_AGGINFO
    WCR_USERNODSTAT
    WCR_USERSTAT
    WCR_WEBCNODESTAT
    WCR_WEBCONTENTSTAT
    So you can write a custom code that could retrieve the values from the tables.
    The activity report can be found under the system configuration under system administration in portal
    System Administration -> System Configuration-> Service Configuration Editor
    Under Applications->com.sap.portal.activityreport.core-> Services->ActivityReport
    Hope this helps.
    Regards,
    Vijai Mohan

  • I WANT to disable internet with a password

    I have teenagers in the house sometimes and a particular issue within the home that requires me to completely disable the internet, while I am not home. I want the computer to be able to be accessed but not the internet. Is this possible and how?? Thank you.

    You may want to enable parental control on Mac OS X accounts dedicated for your children.
    1. Go to System Preferences > Accounts
    2. Create a new account for your children, one for all or one for each
    3. Enable parental controls
    4. In Content, check "Allow only access to these websites"
    5. Eventually remove those you don't want listed.
    6. You may want to use "Time Limits" to restrict usage based on time.
    You may want to look at other options here to simplify computer usage, etc.
    Message was edited by: Yann Bizeul

  • Disable internet access only for specific time with GPO?

    I need to be able to disable web browsing during specific times (night shift for example). I know I can create a GPO policy and set a 'fake proxy' for IE that would blanket kill browsing but I don't want to have that enabled 24/7. Is there any way to do only from like 5pm - 5am.
    Or is there a better way to do this? I know I could setup a Squid Server and set time limits through there. Was just curious if it could be done through AD.
    This topic first appeared in the Spiceworks Community

    Ok, I just thought of a way to do it with GPO.Create the gpo to setup the fake proxy setting and also lock out the proxy setting to keep the users from disabling the setting.Setup targeted application of the GPO based on a specific AD group. Depending on if you setup the GPO policy under computer or user you can add either user names to this AD group or add computer names to this group (you could also create a nested group so you are only adding and removing one name from the targeted GPO group). Setup the task scheduler to add and remove names to this gpo application group based on time of day. Understand there will be a delay of up to 2 hours between the time the user is added to this group and the application of the GPO to the target computer. It would appear a bit clunky, but it should work.The squid route would be a bit more...

  • RAR: Risk resolution options , Remove access from user is disabled

    Hi All,
    In RAR , After risk analysis, if we click on risk description 3 Risk resolution options are there.
    Mitigate Risk
    Remove access from user
    Delimit access for user
    In these options mitigate risk only working.I am using GRC SP 5.
    How about other two options , save button is disabled.How to enable this?
    can we remove/delimit access to  user using these options? any body  tested these options?
    Thanks n Regards,
    Joseph

    Joseph,
       These functionalities do not exist in the tool and these buttons have been in the RAR for past 2 years. SAP wants clients to use CUP for removing or delemiting access so I highly doubt this will ever work.
    Alpesh

  • Windows without internet access?

    Hi,
    I'm wanting to switch from two Windows based computers into two Apples. I'm currently looking at the iMac to replace one and either a Mac Tower model or another iMac to replace the other. If I make the move, and it looks good so far, I'd like to ask a couple of questions to help with the decision.
    #1-Can an Apple with the new Intel cpu have both the Apple OS on board as would be normal and also have a Windows OS such as Win98, etc. in the computer, say in a partition?
    #2-Can an Apple computer with the new Intel cpu, say, be able to go onto the internet while using the Apple OS and also have a Windows OS like Win98 also on the computer, but have the Win98 OS be internet disabled?
    #3-Can for the time being until we get accustomed to the Apple, switch back and forth between the OS's while the computer is on, or must it be booted separately?
    dell xps r   Windows 98  

    #1-Can an Apple with the new Intel cpu have both the
    Apple OS on board as would be normal and also have a
    Windows OS such as Win98, etc. in the computer, say
    in a partition?
    Boot Camp which has Windows in a separate partition, would require Windows XP SP2.
    Parallels which can also be used to run Windows in parallel with OS X can allow you to run Windows 98.
    #2-Can an Apple computer with the new Intel cpu, say,
    be able to go onto the internet while using the Apple
    OS and also have a Windows OS like Win98 also on the
    computer, but have the Win98 OS be internet
    disabled?
    Using Parallels, yes.
    If using Boot Camp, you can disable internet access when booted into Windows.
    #3-Can for the time being until we get accustomed to
    the Apple, switch back and forth between the OS's
    while the computer is on, or must it be booted
    separately?
    Parallels allows you to run OS X and Windows at the same time.
    Boot Camp requires you to re-boot when changing OS.

  • Does ADFS server require Internet access?

    Hello,
    I have two Adfs 3.0  server in intranet and two adfs proxy in DMZ. For the firewall setting in two adfs 3.0 server, I set the default outbound connection as block and create a custom outbound rules allow the connection to intranet. 
    When I add new relying party, ADFS can not verify the certification of the RP. The certificate of the relying party is wildcase cert and issued by DigiCert. I have already install the root CA cert in trusted root certification authorities of two ADFS server.
    But ADFS still can not recognize the certification path. After I change the default outbound connection as allow in firewall setting, ADFS can verify the certificate. I continues the process and close internet access after user can successful login.
    A few days later, user can not login. The following error log exit in ADFS log:
    Event ID 317:
    An error occurred during an attempt to build the certificate chain for the relying party trust 'https://xxxx.xxxx.xxx.xx' certificate identified by thumbprint 'xxxxxxxxx'. Possible causes are that the certificate has been revoked, the certificate chain could
    not be verified as specified by the relying party trust's encryption certificate revocation settings or certificate is not within its validity period. 
    You can use Windows PowerShell commands for AD FS to configure the revocation settings for the relying party encryption certificate. 
    Relying party trust's encryption certificate revocation settings: CheckChainExcludeRoot 
    The following errors occurred while building the certificate chain:  
    The revocation function was unable to check revocation for the certificate.
    The revocation function was unable to check revocation because the revocation server was offline.
    User Action: 
    Ensure that the relying party trust's encryption certificate is valid and has not been revoked. 
    Ensure that AD FS can access the certificate revocation list if the revocation setting does not specify "none" or a "cache only" setting. 
    Verify your proxy server setting. For more information about how to verify your proxy server setting, see the AD FS Troubleshooting Guide (http://go.microsoft.com/fwlink/?LinkId=182180).
    I reopen the firewall in outbound rule. then everything run as normal, user can login again. 
    Does ADFS require internet access for certification path checking? If I really want to block the internet access, which port I need to open in order to allow ADFS check the certificate?
    Thank you very much.

    You can run 
    Set-AdfsClaimsProviderTrust -TargetName "<IDP name>" -SigningCertificateRevocationCheck None
    and see if this fixes the problem (link from the event log will tell you the same thing), As Bart describes in his topic: https://social.msdn.microsoft.com/Forums/vstudio/en-US/47345c69-7b68-4f09-907e-43ed2805cac0/adfs-30-signing-certificate-crl-check-with-http-proxy-to-the-internet?forum=Geneva

  • No Internet Access with Static IP and RVS 4000

    I have an RVS 4000.  I have several PC's to which I have assigned static IP addresses.  I have recently upgraded most of the PC's to Win 7 (64) machines.  I updated the firmware on the RVS4000 to 1.3.3.5 in conjunction with this.  After such update (and actually before as well) I could not assign a static IP address to a PC and have access to the internet.  It connects fine to my LAN, just no internet access.  This is also affected on several other machines running Win XP and Win 2003 Server, so it's not just this computer. 
    I have:
         1.  Shut down (powered off/unplugged) everything, router, DSL modem, switches, server, etc.
         2.  As I said firmware is current.
         3.  Yes, DNS servers and gateway, subnet, etc. are all correctly specified on the PC.
         4.  Router is set for gateway mode.
         5.  Set to only IPV4.
    The only way it allows internet access is to use DHCP.  I've even tried taking the IP address via DHCP and manually assigning the DNS servers and that works fine, but as soon as I assign a static IP internet access is immediately gone.
    There must be something I'm missing, but I can't seem to find it.
    Everything worked fine prior to the conversion of the Win 7 machines, i.e. I had several PC's with static IP's and no problems.
    Any thoughts appreciated.

    As an addendum, if I turn off the Firewall (internet access policy to disable) it will allow the static IP computer to have internet access.  I have the DHCP range set to be .5 - .54 and am using a static ip outside this range.  The Internet access policy is to restrict those PC's getting IP via DHCP.

  • Control Internet access using machines names

        Hello to all, I have some machines (> 100) that are DHCP client and are on different subnets. I need that users that work on these machines don't access Internet. Is a there a way on TMG 2010 to create any
    kind of control to accomplish this need?
        Regards, EEOC.

    Hi,
    You can only control the traffic with IP addresses not computer names. A other way to limit internet access is to use users and groups in TMG firewall policy rules. The clients must be Webproxy or TMG clients
    regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

  • PSE10 - How to get the online help on PCs with no Internet Access ?

    Hello,
    Our company has bought several licences of Photoshop Elements 10 and would like to package the installation in order to be able to install it with SCCM (formelly called SMS) on PCs.
    The issue we've got is that the PCs in our company don't have Internet access, so Users can't, after the installation, download the help online... and since there is no offline help included, that means they don't have any help at all.
    Can you let us know where the help in question is copied when it is downloaded, so that our packaging team will be able to download those files from a PC with Internet Access and then add them in their package so that our Users will be able to read the Help (F1) even if they don't have Internet access ?
    Thanks a lot for your reply

    yes you can do that by changing settings in Adobe Help Manager
    Open Adobe Help.exe from the location :  c:\program files (x86)\Adobe\Adobe Help
    Then in the download prefrences section , you can select the products you wish to have offline help
    In the updater section select manually
    In the local content section : select the product and click UPDATE
    when the offline help is downloaded, then in the general section, select Yes (this will make the local help default)
    Now if you can go offline, and press F1 within the program , it will open the local help
    Hope it helps !!

Maybe you are looking for