I want to display the bluetooth headset list.
- I want like this screen.
Question
1. How do get change audio source??
2. Could you tell me?
public api about BluetoothManager
You fail at the internet.
Similar Messages
-
Can not pick up sound through the Bluetooth headset microphone.
I use a Plantronics Bluetooth headset M55 connect new IPAD (IOS6.0), long press the voice dialing, SIRI from Bluetooth headset microphone can not pick up sound, still or IPAD comes with a microphone to pick up sound, SIRI does not recognize, but canfrom the earpiece of the Bluetooth headset to hear the SIRI feedback sound.Want to be able to solve this bug.
Same issue on my wife's iPhone 4S. I suspect it is related to the recent 6.1.2 iOS update (Note: I have a 3S and the update did not cause any issues).
I've tested both bottom and top mics on the 4S using video recorder and both mics work fine. Speakerphone and headset during calls also work fine. The issue is only related to the bottom mic while making calls. I can hear the caller but the caller cannot hear me. If I hold the mic very close to my mouth, the caller can hear a very low level signal.
The problem appears to be software related, not hardware. -
Was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s
was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s ?
thank you greatly
also i would like to know what are the diffrences with the bluetooth 4.0 vs 2.1
( the bluetooth headset i was thinking of is jawbone icon series thinker black )Hi,
I had HUGE issues with a BlueAnt Q2 on the 4, and after five exchanges, I had to get rid of the phone becuase the Apple store admited that they had "some bluetooth issues."
I still have the Q2, and I was wondering the same thing becuase I realy want an iphone. -
when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
Any ideas - solutions - comments please?I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece. -
Since I upgraded to Firefox version 3.6.10, clicking on the downward arrow at the right end of the location bar no longer displays the drop-down list of sites visited, bookmarks and addresses typed in location bar. My Tools > Options > privacy setting is to save history, and if I start typing a previously accessed website's address in the location bar, then the full address appears as a drop-down item. But not when I just click at the right end of the bar.
You can try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Hi,
This is my first post on Adobe DPS forum.
On one page I want to print the UDID of my iPad. But this should be a variable as whenever I open my folio on another iPad it should show the UDID of that iPad. All in all, whenever I open my folio it should display the UDID of the iPad on which I'm opening the folio. Is it possible?
Thanks in adavance and best regards.
With regards,
Anil Yadavi don't think you have access to this 'sensitive kind of information'.
a Google search for "html UDID display" might get you the answer in seconds.
—johannes
(mobil gesendet)
Am 07.10.2011 06:11 schrieb "Anil Yadav" <[email protected]>:
Re: want to display the UDID created by Anil Yadav<http://forums.adobe.com/people/Anil+Yadav>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/3959005#3959005> -
I'm using qurey panel with table.i want to display the rows as default
Hi
I'm using jdeveloper 11.1.1.2.0 with ADF 11g.
I'm using qurey panel with table , for first time when i run ,rows are not displayed as default .After i fire search button records / rows are displaying.Now i want to display the rows in table when i run for first time , mean i want to display rows by default.
thanks in advance.Hi,
if the queryPanel is based on a ViewCriteria in ADF BC then this autoExecute can be defined on the VC definition
Frank -
I have a key figure in my master data table i want to display the key figur
Hi All,
I have a key figure in my master data table i want to display the keyfigure in my report how can i display it can somebody help me in this scenario
Regards
Kiran KumarHi Kiran,
Assume that Material master data table material has price as an attribute. To get this price as key fig in query, get material number in rows and in columns create new formula with replacement path to get material price as key figure.
Note: Without taking material number into rows, we can't get the price into columns.
Hope this helps u..
Cheers......
Sk babu -
I want to display the narrative view as All Choices
Hi Experts,
If ‘All choices’ option is selected, I want to display the narrative view as All Choices.
How do I achieve it?
Waiting for your reply....
Regards,
SathyanHi Sathyan,
Set a presentation variable for that prompt.
and in request, go to the column formula,
CASE WHEN '@{pv_var}' IS NULL THEN 'ALL CHOICES' ELSE col_name END
Regards,
Raghu -
Hi, I want to display the number of Passed / failed tests in Testtand xml report , please help me.
My requirement is later i should be able to display these number of passed/failed test in report header too.
Solved!
Go to Solution.I have attached a sequence to give you an idea of how to get the Result count (I didn't check it's working ), I have used "SequenceFilePostResultListEntry" callback to calculate the Result Count,
and the Result Count is passed to the "ModifyReportHeader" through File Globals, where you can edit the XML file to show it in the Repot (follow the link in my previous post).
Hope this helps
AshwiN,
Attachments:
Get Result Count.seq 8 KB -
I want to display the 3 different counts in one table
Hi,
I have three different counts , now I want to display the 3 counts in one table. Is it possible,
For example :
1. Select count(*) from table1 ;
Ans : 10
2. Select count(*) from table2;
Ans : 20
3. Select count(*) from table3;
Ans : 30
Now I want to display like this
A 10
B 20
C 30
ThanksNihar,
You can write a pl/sql block to achieve this
CREATE TABLE new_table (table_name VARCHAR2 (30), COUNT NUMBER);
DECLARE
CURSOR mcur
IS
SELECT table_name
FROM user_tables
WHERE table_name IN ('A', 'B', 'C');
v_sql VARCHAR2 (100);
v_count number;
BEGIN
FOR x IN mcur
LOOP
v_sql := 'select count(*) from ' || x.table_name;
EXECUTE IMMEDIATE v_sql INTO v_count;
INSERT INTO new_table
VALUES (x.table_name, v_count);
END LOOP;
COMMIT;
END;
select * from new_table;Regards -
I want to display the Employee details in table format without using iGrid
Hi all,
Can anybody help me that I want to display the Employee details return by transaction in table format without using iGrid.Hi, view the link below.
http://help.sap.com/saphelp_xmii115/helpdata/en/Advanced_Topics/Customizing_Output/Customizing_Output.htm
Hope this help.
Danilo Santos -
Hi,
I want to display the website which i have designed using jsp,mysql in telugu.I have searched a number of articles but couldn't get sufficient information.I read articles on internationalise jsp based websites but they were about converting in other languages rather than indic languages.
Could anyone let me know the procedure to convert it into indic languages.What all are required.
Thanks.(Please keep the subject line to a short descriptive sentence. Don't put your entire question there.)
LabVIEW can communicate via serial port. If the microcontroller listens to serial data, there must be a certain command to light a LED connected to a certain port. All you need is to check the manual to find out what the serial data needs to be.
LabVIEW Champion . Do more with less code and in less time . -
Want to display the item in MDM2 but dont want the customer to order it
Hi
I want to display the item in the catalog but i want to block the material from being orderd. how do i do that?Hi,
SRM-MDM Catalog has somthing like display mode. You can set it in UI customizing. If you want to block order for only some of items, please create custom filed like "display only=X" and check the value in the BADI BBP_CATALOG_TRANSFER.
Regards,
Masa -
Want to display the contents of a text file in a jsp
hi
i am new to jsp, i want to display the contents of a text file in a jsp file ,whenever jsp file is loaded from browser.
-thanxi had come up with the code
<!-- form.jsp -->
<%@ page import="java.io.*, java.lang.*" %>
<%@ page language="java" %>
<html>
<head>
<title>Display</title>
</head>
<body>
<%
String sample[100];
String line;
%>
<%! int i=0; %>
<%!File f1 = new File("c:\\file.txt"); %>
<% try { %>
<%!FileReader fi = new FileReader(f1); %>
<% } catch(FileNotFoundException io) { } %>
<%!BufferedReader in = new BufferedReader(fi); %>
<%
while((line=in.readLine())!= null)
sample= line;
i++;
in.close();
%>
i will display sample here
</body>
</html>
but i am getting error
display_jsp.java:16: unreported exception java.io.FileNotFoundException;
must be caught or declared to be thrown
FileReader fi = new FileReader(f1);
^
plz help
-thanx
Maybe you are looking for
-
Can someone help me why this quick sort doesn't work
public class QuickSortII { static void sort(int a[], int lo0, int hi0) { int lo = lo0; int hi = hi0; if (lo >= hi) { return; int mid = a[(lo + hi) / 2]; while (lo < hi) { while (lo<
-
Dear All, Our customer is using SAP2007 PL45. SQL 2005, US localization. Everybody remote to terminal server and use SAP from their. The terminal server is Windows Server 2003. When they export service call to pdf file, sometimes, it has .pdf as of t
-
Problem with building conditional display items
Dear All, Please help as I am using APEX for the first time. This my requirement during form dispaly in tabular format. There is one display item QA_TIER(not a database item). This item value is computed based on the condition below. I created a disp
-
How to display abap reports in EP
Hi all, I have developed new reports in R/3. how to display these abap reports in EP...
-
hi when i am doing third party billing in ides system i am getting this type of error TAX CODE GO COUNTRY IN DOES NOT EXIT IN PROCEDURE TAXINN REGARDS