I want to install Adobe PageMill 3.0 on my laptop which runs under Windows Vista but cannot because the original input was on floppy discs, and I don't have a floppy disc drive.

Is Adobe PageMill 3.0 still available? I use it to run three websites but it does not run on my new desktop which has a 64-bit operating system. However it would run on my laptop which runs under Windows Vista. But the original installation was from floppy discs and I do not have a floppy disc drive.

I am sorry Lcosahedron I am not aware of a download location for Adobe PageMill 3.0. It appears it was discontinued in 1999. You can find more details at Adobe PageMill - Wikipedia, the free encyclopedia.

Similar Messages

I have I tunes installed on Windows 7 but cannot access the music store to purchase. Set up an account but cannot access that now. Suggestions?

Can someone give me some feedback on how to access the itunes store from my itunes music library using Windows 7 operating platform? Sometimes nothing happens. Other times rectangular boxes appear on top half of screen and words like "Today's Music" and song names appear but then computer locks. Other times the bar across the top acts like it is accessing the store but nothing opens.

How to get iTunes Store to Work with Windows 7
First, Remove all iTunes and supporting software – and all “remnants” using Revo Uninstaller. Ensure you set Revo Uninstaller on its “Advanced” setting.   You should be able to download a Revo trial software version at no cost. Recommend one follow the directions posted at this website:   http://www.howtogeek.com/howto/23959/completely-remove-itunes-and-other-apple-so ftware-from-a-windows-computer/
The goal/intent of these directions/procedures is to ensure complete removal of all iTunes and its supporting software. Make sure you get all of it, or you will end up repeating this lengthy procedure.
Next, before reinstalling iTunes:
Start-> Programs -> Accessories -> (Right Click On Command Prompt) ->Run the Command Prompt as Administrator then type in:
netsh winsock reset, hit enter, restart PC.
After this procedure, then reload the latest version of iTunes Software and see if you can access the iTunes Store.
If the iTunes Store does not open or completely open after installation, then run this procedure:
Start-> Programs -> Accessories -> (Right Click On Command Prompt) ->Run the Command Prompt as Administrator then type in:
netsh winsock reset, hit enter, restart PC, open iTunes… then open iTunes Store (yes, this is a repeat of the command line you ran prior to installation).
After this procedure, you may find the iTunes Store’s “initial page” will open. However, you may not be able to access any music within the iTunes store…   Ensure you are logged in with your name and password…
Once you know you are logged in with your name and password, then:
On the Start menu, point to All Programs > Accessories and then right-click Command Prompt and choose Run as Administrator from the shortcut menu. If Windows needs your permission to continue, click Continue.
In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
You should see a message that the DNS Resolver Cache has been successfully flushed.
But wait, there’s more! Now you need to go to the “Edit Button” of iTunes and select “Parental”.   Under “Parental”, check “Allow access to iTunes u” and then ensure iTunes Store is “unchecked”, then press “OK” to ensure this configuration “takes”. Then, stop and restart iTunes. You should now have a smooth running version of iTunes with full access to the iTunes store. If not, then please modify these directions for those requiring a solid solution. Thanks

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Please help! The alias can't be opened because the original item can't be found. Portable Hard Drive, Macbook, OS 10.7

Hi folks,
Desperate for some help!
I have a very cluttered, slow Macbook Pro running 10.7.5. Bought a 2TB WD My Passport for Mac (2TB) with the intention of transferring my many, many files and folders over to it, to increase my memory and boost the performance of my Macbook. (Also handy to have files on the go).sktop
I transferred everything (all files off desktop, documents, photos etc) using drag and drop.
Then I trashed all the files, but did NOT empty Trash because I wanted to check the process had worked
Now, when I plug in my hard drive, and open it up, all my files and folders are there, but with little arrows on the bottom left of the file/folder. When I go to open any one of them, I get this message:
"The alias “X” can’t be opened because the original item can’t be found."
I don't know what to do. Is this because of the way I dragged and dropped the files? I'm guessing so. Or is it because I still have the items in my Trash? (I'm obviously petrified of emptying the Trash now though) Is it because of my OS?
Apologies, I'm a novice to this (hence why my 4 year old mbp is running so slowly; it's got 4 year's worth of work on it, and now I obviously don't even know how to transfer files properly to an external HD) but I'd really be ever so grateful for your help. I just want to successfully back up my files to this HD so my mpb runs faster. I'm now terrified I've corrupted my files. I don't even understand what an Alias is.
Would love to hear from you! I'm totally new to these forums so hope I've posted right! Thanks!

sibby22 wrote:
...Now, when I plug in my hard drive, and open it up, all my files and folders are there, but with little arrows on the bottom left of the file/folder. When I go to open any one of them, I get this message:
"The alias “X” can’t be opened because the original item can’t be found."
It sounds like what got created on your external is a collection of aliases which point to the original files and folders but aren't actually copies of the files and folders themselves. The original items have been moved to the trash so even if they could be found, they couldn't be opened. As a test, pick a file (not a folder) on the external that should be large and see what size it actually is (Get Info). Aliases are smaller so you can tell the difference apart from that little arrow (the Get Info box will also identify the file as an alias). Dragging the files to the external should have automatically created copies rather than aliases unless you held down the Command and Option keys while dragging.
In any case, you were wise not to empty the trash; to be safe get those important files back out of the Trash so you can start over. But this time, try moving a few at a time and let us know what happens.

TS1382 I have a ipod classic 160GB and it's not showing any music anymore, but there is still 7GB of memory being used, and I don't have it back up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that

I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?

What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often.

My old computer has broken and I had not backed up my Itunes. I now have the hard drive from my old computer but cannot transfer the music. How can I transfer the music from my old hard drive to the new laptop?

My old computer has broken and I had not backed up my Itunes. I now have the hard drive from my old computer (windows 7) but cannot transfer the music. How can I transfer the music from my old hard drive to the new laptop (windows 8)?

Copy the entire iTunes folder from \Users\<User>\Music on the old drive into your music folder on the new computer.
Or see Recover your iTunes library from your iPod or iOS device.
tt2

I want to install Adobe Reader on a different drive.

I want to install Adobe Reader on a different drive as my C drive is much smaller than my storage drive.

Still, you can install the Reader folder on any drive you want using the installer from http://get.adobe.com/reader/enterprise/
Use the Change Destination Folder button at the bottom of the install panel.

Want to install Adobe CS on new MBP; do I need to de-authorize on pb first?

Hi there,
I bought Adobe Creative Suite three months ago, installed it on my pG4 powerbook.
Recently I got a MacBook Pro. Should I de-authorize Adobe on my powerbook before installing it on my MBP? Part of the reason I ask is because at some point in the future, I hope to get a Mac Pro, and will definitely want to install Adobe CS on it.
Are there issues to de-authorizing?
Any special steps anyone can advise me on?
Thanks,
Malcolm

Yes. According to Adobe, you should deactivate any copy of their CS applications before attempting to use the same serial number for another install. Even if it's on the same computer in the case of an erase and reinstall of the entire hard drive.
All you have to do is launch any of the Creative Suite apps. From the menu, choose Help > Deactivate. You will get a box warning you that you will be deactivating the entire suite for that computer. You can't deactivate just one portion of it, like Illustrator, and leave the rest installed. Click the Deactivate button.
I don't remember what the original CS suite gives you for options to uninstall it. Go to the /Applications/Utilities/Adobe Installers/ folder and run the alias linked programs to uninstall the software, if you have them. Otherwise, put in the original CD or DVD and see if there's an option to uninstall the software there.

Want to install adobe flash on my iPad mini. Can I ?

Want to install adobe flash on my iPad mini. Can I ?

Adobe flash player is not compatible with ipad mini.

I want to install adobe digital editions

i want to install adobe digital editions

Do not try to help me anymore!!!
This system works very bad!!!!
I wil call the dutch helpdesk!!!
Verstuurd vanaf mijn iPhone
Op 5 okt. 2012 om 21:09 heeft Frustrated in AZ <[email protected]> het volgende geschreven:
Re: i want to install adobe digital editions
created by Frustrated in AZ in Adobe Digital Editions - View the full discussion
I can work with Windows 7 just fine, but you need to tell me what the error
message says so I can help you.
===============
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752751#4752751
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752751#4752751
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752751#4752751. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Digital Editions by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have a account and when i want to install adobe creative cloud i got a error code 62 what can i do?

i have a account and when i want to install adobe creative cloud i got a error code 62 what can i do?

Error 62 https://forums.adobe.com/thread/1573853

HT3799 I want to install Adobe Reader for an attachment that I cannot open. The Keychain comes up with password. I forgot my password how do I retrieve it?

I want to install Adobe Reader for an attachment that I cannot open. The Keychain comes up with password. I forgot my password how do I retrieve it?

You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Hello, I have a Mac and want to install Adobe Encore CS6, my Mac must have Adobe Premier for its operation?

Hello, I have a Mac and want to install Adobe Encore CS6, my Mac must have Adobe Premier for its operation?

You install PPro to then install the bundled Encore, but you do not need PPro to run Encore (but be VERY careful if you try to uninstall Premiere Pro, that you do not also uninstall Encore)

I want to install adobe cloud. I have a mac with osx 10.6.8. is that possible?

I want to install adobe cloud. I have a mac with osx 10.6.8. is that possible?

i don't think so ... u should update to mavericks thru app store. .. still free

I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I am a Mac user and I don't have cd drive in my compu

I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I have the product code with me. I am a Mac user and I don't have cd drive in my computer and I am indeed to get this product activated now. How can I install this without cd drive? Anyone please help me with this issue?

You may download the product from
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

I want to install Adobe PageMill 3.0 on my laptop which runs under Windows Vista but cannot because the original input was on floppy discs, and I don't have a floppy disc drive.

Similar Messages

Maybe you are looking for