I want to manuel set "bind varaiable" when page on load with ADF BC

hi,
I am opening a page from other page, opening page is query page that it must take its bind varaiable from main jspx page on ADF,
how can I set bind varaiable for query when the page on load.
or how can I qeury according to main page variable.

Hi,
you can write data to teh session and then reference this from teh bind variables on the opened page using EL
e.g. #{sessionScope.departmentId}
To set data to the session, you can use an ActionListener in ADF Faces
from: #{row.departmentId.inputValue)
to: #{sessionScope.deptId}
The above copies the value of a selected table row to the session
Frank

Similar Messages

TS4050 when i want to sign in apple id in icloud from setting , appear a black page and loading .... help me ...

when i want to sign in apple id in icloud from setting , appear a black page and loading .... help me ...

Hello shlomi2890,
To resolve your issue, you would need to change the Apple ID back to what you had originally, sign out and then change it back. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Regards,
-Norm G.

Prevent Queries When Page First Loads

Hi,
How to Prevent Queries When Page First Loads: in this case #{!adfFacesContext.initialRender}
didn’t works. and Jdeveloper 11.1.1.2.0.
Please help me ..
Thanks
Anup

Hi Mohammad Jabr,
I have also set refresh property but not working..
i have follow the link refer https://blogs.oracle.com/shay/entry/preventing_queries_when_page_f
I want to prevent user to search without selecting any criteria.
but this is not working..
Please give any other solution..
Thanks
Anup
Edited by: 888679 on Mar 13, 2013 10:46 PM

Best Practice for setting bind variable when application loads

I am using JDeveloper 11.1.2.3.
When my application loads, the first unbounded page has a table populated by a named query.
I would like to set the parameter used by the named query when the page loads, to populate the initial data that is displayed.
What is the best practice for a solution to this issue?

user6003393 wrote:
I am using JDeveloper 11.1.2.3.
When my application loads, the first unbounded page has a table populated by a named query.
I would like to set the parameter used by the named query when the page loads, to populate the initial data that is displayed.
What is the best practice for a solution to this issue?Hi,
You can set the bind variable on VO by overriding prepareSession() method in Application Module check this http://docs.oracle.com/cd/E37975_01/web.111240/e16182/bcservices.htm#sthref357
Setting bind variable on runtime http://docs.oracle.com/cd/E37975_01/web.111240/e16182/bcquerying.htm#CHDECJHD
Zeeshan

Set focus to specific field when page is loaded

Hi
simple login page (jsp) with 2 fields. when the page is loaded, I want the focus directly in the first field, so that the user can immediately start typing his userid. How do I do this with Creator 2?
thanks, Peter

thanks, I was missing the proper search term ... :-)
here I found the answer: http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=63057
Peter

How to execute a method when page is loaded

hi ,
I have a custom method in backing bean of a .jspx page. I want to execute it by default when the .jspx page is loaded.can anyone say how to do it?

Hi,
depends on what this is doing: You can call it in a PhaseListener, or from the page using a EL reference (e.g. output textfield that shows empty) or by customizing the ADF pagelifecyce.
You may want to have a look at
http://thepeninsulasedge.com/frank_nimphius/2007/08/09/jsf-hook-into-the-javaserver-faces-page-load/
Frank

Disabling components when page is loaded

Hi all,
I have a web page where I want to disable some components (a selectmany_menu) depending on the data that other components on the page are displaying (a selectone_menu).
I have got a value changed listener working fine that disables my selectmany_menu depending on what is selected in the selectone_menu. The event listener checks the data and then uses the setAttribute method to disable the selectmany_menu if necessary.
However, what do I do when the page is first loaded. I there a way that I can invoke the event listener (or something else) when the page is loaded so that the correct components will be enabled and disabled.
Thanks
Patrick

Maybe I can state my question above in another way...
I using a standard command_button to navigate from one page to another page.
<h:command_button actionRef="xyzBean.goToPage" label="Go" commandName="submit" />
public Action getGoToPage() {
return new Action() {
public String invoke() {
//MANIPULATE COMPONENTS ON NEW PAGE
return "success";
The question is, how do I access the components for the page that I am going to rather than the page that I am coming from. I tried this:
FacesContext context = FacesContext.getCurrentInstance();
UISelectMany myMenuComponent= (UISelectMany) context.getTree().getRoot().findComponent("myMenuComponent");
myMenuComponent.setAttribute("disabled", "true");
However, this fails because the tree that I get access to is the tree I am coming from, raher than the one I am going to.
Is there a way to access the new tree?
Patrick

Placeholders display when page is loading

Hi,
I am using spry 1.6 and have made a page where data is loaded
from XML and displayed using PagedView, when ever the page is being
loaded for the first time I could see the dataset tags/placeholders
being displayed like {ds_pageNumber}, {title}.
Is there anyway to not show this when the page is loading.
The URL
http://demo.dci.in/galatta/v2/main2.html
Demo Page
This element is the images box's under the Trailers tab on
top right side of the page.
Any help would be appreciated.

Hi,
Check this sample:
http://labs.adobe.com/technologies/spry/samples/data_region/HideDataReferencesSample.html

[iPhone] Memory leak when UIWebview is loaded with URL

I have created a custom browser in my app using UIWebview . A memory leak is seen on everytime webview is loaded with provided url. A snapshot of the leak is shown below.You may note that no back trace is shown and hence cause of leak is unknown.
Snapshot of leak
Please help me with this issue as early as possible.

You might want to take this discussion to the developers forums. This is a general user to user forum for using the iPhone. This is way outside the scope of general use.

Finding out when page is loaded

Im using setPage wit editorpane, just wondering how I find out when the page is fully loaded. Should I use threads?

Nobody has found a way yet, that I've seen posted on the forum. A PropertyChangeEvent is fired when the initial page is loaded, but if that page needs to load images and stuff its creates a bunch of separate Threads to load the images. So no event is fired when everything is completely read.

How do i change the setting so that when i close windows with multiple tabs, they will ask questions ' save pages' or 'quit' or 'cancel'.

I really need help with this cause when im using firefox 3.6 , usually when i want to close the window , they will ask me whether i want to save the tabs or close or cancel.. but im having difficulties with firefox4.
and now i need to type again the last tab page which i went to.its kinda troublesome.
really need help for this.

Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

Radio Buttons - Want both to show up blank when page comes up new.

I have a radio group(with submit) that has 2 buttons(STATIC2:No;N,Yes;Y). When Y is selected, a submit is performed which then displays another field.
I need this to be a required field and have the user definitely select no or yes so
I want the buttons to come up blank. How is this accomplished?

Hi,
Let's say you have 2 fields:
1- P1_RADIO (is required to display P1_TXT_FIELD)
2- P1_TXT_FIELD
add a conditional item display to this item:
"value of item in expression 1 = expression 2"
expression1: P1_RADIO
expression2: Y
The server validations should not be trigger during the form completion phase... i would review the page workflow if this is the case to ensure a better user experience
Louis-Guillaume
Homepage : http://www.insum.ca
Blog : http://insum-apex.blogspot.com

What happened to my old web page, using att ,I do not want to re set my old home page. This is the third time and I don't want to spend hours on phone.

My att. yahoo home page has change. Font size and material on home page. the print is very small and info has changed.

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

Hi, I cant run set Method of bindings on my class with ADF BC

Hi I made a private definition, as follow.
private BindingContainer bindings;
get and set method
public void setBindings(BindingContainer bindings) {
this.bindings = bindings;
public BindingContainer getBindings() {
return this.bindings;
How can I run set method when the Page loading.
Onur...............

Thanks, I wrote your code it worked.But there is another problem.I'am sending my code and the place of error.
I wrote this code for reading column of the table. Can you help me please?
Here is the code:
public Vector getNid(){
Vector vNid = new Vector();
CoreTable table = this.getMasterDetail1();
Set rowSet = table.getSelectionState().getKeySet();
Iterator rowSetIter = (Iterator)rowSet.iterator();
BindingContainer bindings = getBindings();
DCIteratorBinding pr_dcib=null;
try {
pr_dcib = (DCIteratorBinding) bindings.get("EgitimTalepHareketiIViewSorgu1Iterator");
catch (Exception e) {
System.out.println(e.toString());
while (rowSetIter.hasNext()){
//set the current row in the ADF binding to the same row
pr_dcib.setCurrentRowIndexInRange(((Integer)rowSetIter.next()).intValue());//in this place Iam taking error
ViewRowImpl prRow = (ViewRowImpl) pr_dcib.getCurrentRow();
String rid="0";
try {
rid = (String)prRow.getAttribute("HareketId").toString();
catch (Exception e) {
System.out.println(e.toString());
System.out.println("Hareket ID : "+rid);
vNid.add(rid);
return vNid;
The eror is like this
javax.faces.FacesException: #{backing_GenelEgitimListesi.commandButton1_action}: javax.faces.el.EvaluationException: java.lang.ClassCastException: oracle.jbo.Key at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:98) at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401) at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95) at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)

How to Put Focus on any item when page gets loaded

Hi,
When i run OA Page, focus doesn't come up on the field where we need. So is there any way we can tell that focus must be on this if i take some action?
Thanks,

Try using this piece of code
To set the initial focus for a web bean
import oracle.apps.fnd.framework.webui.beans.OABodyBean;
OABodyBean oabean = pageContext.getRootWebBean();
OABodyBean.setInitialFocusId(“idofuielement”)
Regards,
Nagesh Manda.

I want to manuel set "bind varaiable" when page on load with ADF BC

Similar Messages

Maybe you are looking for