I want to plug in my macbook pro MD101LL 2012 to my old TV that has only RCA inputs. What adapter do I use?

I want to plug in my macbook pro MD101LL 2012 to my old TV (Samsung) that has only RCA inputs. What adapter do I use?

you will need a mini display port to rca video adapter.
have a look here.
http://www.amazon.com/DisplayPort-Composite-Video-S-Video-Converter/dp/B004VV8R8 6

Similar Messages

Connecting Macbook Pro osx10.6.8 to flatscreen vis HDMI. Only suggestions I have seen is to use Mirror Image in sysPref displays. I don't see any mention of mirror image in displays. Won't connect

Connecting Macbook Pro osx10.6.8 to flatscreen vis HDMI. Only suggestions I have seen is to use Mirror Image in sysPref>displays. I don't see any mention of mirror image in displays. Won't connect

I am asking the Moderator to move your post to the MacBook Pro forum, this is an iMac forum.
Good luck.

The battery of my macbook pro will not charge and the LED light is only green. What to do?

the battery of my macbook pro will not charge and the LED light is only green. What to do?

This might help:
Intel-based Macs: Resetting the System Management Controller ...
Otherwise, you should probably take your computer in to a service place to be tested, since there a a few possible causes of this behavior.

Motherboard broken Macbook Pro Sept 2012 (13 months old)

My MacBook Pro is just over a year old, arrived Oct 2012: I have never dropped it and always took great care of it e.g. letting battery fully die before recharging etc. Two weeks ago the when I restarted it the grey loading circle screen came on and wouldn't log in. I ran disk repairs and reset the PRAM. Still wouldn't work so I gave it into a regular computer store to be repaired. They initally thought the harddisk was broken but now they're telling me that the Motherboard is gone. How can this be? It's only 13 months old!

I would ask for it back and do one simple test. Remove the original hard drive and connect it to the system with a SATA to USB adapter and run the system from that drive. If you still get errors buy a new hard drive and do the same, connect it to the computer with a SATA to USB adapter and install OS X on it and run the system from there.
If the system runs fine with the original drive it is not the drive or the logic board (Motherboard) that is the problem.
It is more than likely the cable going from the drive to the logic board that is the problem. If the system doesn't run fine with the original but does with a new drive with a clean install of OS X then it was the original drive.
You would expect a Mac computer costing much more than a Windows PC with the exact same hardware would last longer. But the simple fact is any electronic device, no matter who brands/sells it or how much it costs, can fail at any time.

Migration Assistant can't find External HD on MacBook Pro Mid-2012

Hi, I have a MacBook Pro Mid-2012 running OS X Mountain Lion 10.8.2 and I am trying to use Migration Assistant to transfer Time Machine backups that are on my external hard drive, that I backed up from my old MacBook Mid-2010. The problem I am having is that Migration Assistant can't find my external hard drive. My MacBook Pro can find it when I plug it in (I see it in Finder), but Migration Assistant can't. Can anyone help or should I go to the Apple Store? I need help with this problem as soon as possible.
Thanks in advance,
- Daniel 

Since no one replied I figured out how to do it myself.
1.) First I plugged in my external hard drive with my Time Machine backups on them, then I opened Finder and click on my external hard drive under devices.
2.) Next I clicked on and opened the folder named "Backups.backupdb"
3.) Once inside that folder I could see folders with the backups from Time Machine and all of the folders names were the date I backed up that backup. I clicked and opended the lastest backup folder.
4.) Inside that folder, I clicked and opened the folder named "Macintosh HD"
5.) Inside that folder, I clicked and opended the folder named "Users"
6.) Inside that folder, I clicked and opended the folder named "Daniel" which was my Username on my previous Mac.
7.) Finally I could see and access all my folders from my Time Machine backups from my previous Mac.
Keep in mind this is only helpful if you are trying to access old backups (backed up from another Mac) on a new or different Mac. (Sorry for the blurry images)
Hope this somehow helps someone else,
- Daniel 

Using a macbook pro (late 2012) as primary desktop recommended?

I own a macbook pro Late 2012 edition and I am thinking about connecting it to an external monitor and using it as my primary desktop. Is this recommended? I am afraid that it will harm my macbook..especially the battery. Any insight would be appreciated.

If you use an external keyboard, USB or BT (as a desktop computer, you could use USB
and use a powered USB hub for printer, mouse, keyboard, etc and to import from devices
such as cameras, etc) and either get a stand to keep the MacBook Pro on edge out of
the way with the lid closed, or use it on a different stand to keep it up off the desk so air
can flow around it, with display lid open, for maximum cooling & extended/mirror desktop
use of the integrated display along with an external.
The battery should be used on occasion and not overly 'cycled' since it likely is one good
for up to 1,000 cycles of discharge & recharge; but never let it go completely flat or that
would damage its ability to carry a full charge. If I'm not mistaken that model is one with
an integrated or hidden battery behind the bottom plate, so it can't be removed and run;
but then if you did remove a laptop battery, it likely would cause the processor to reduce
speed and be less than optimal specification when you needed it for higher function tasks.
There are articles in Apple Support database on how to care for a portable Mac battery
and also some may be dated in that older models are suggested to be Calibrated on
occasion and the newest batteries (such as those in Retina models) are different. If you
have a MacBook/Pro with non-Retina display, check the support articles to see if that
model, with a built-in SuperDrive, could benefit form Calibration of the battery.
•Apple Portables: Calibrating your computer's battery for best performance
•Apple Portables: Troubleshooting MagSafe adapters
•About Apple Notebook Batteries :
http://www.apple.com/batteries/notebooks.html
•About Apple Batteries in general:
http://www.apple.com/batteries/
•Repair ideas for 'out-of-warranty' MagSafe AC Adapters:
https://www.ifixit.com/Device/Apple_AC_Adapter
It is a good idea to get a spare power adapter of the correct model for your Mac.
I see there are some that are exact replacement on occasion at OWC macsales.
While in use as a desktop replacement, the computer may work better if you use
USB peripherals as the BlueTooth and other accessories would see less wear;
however that may be subject to a bias against using the built-in items so they
would not have a chance to wear out. Like the internal keyboard, for example.
A USB keyboard works in situations where the BlueTooth may not, and also
is easy to replace, where the built-in one is not easy, nor inexpensive.
Expect to replace the battery before the approximate cycle life is reached,
though it may be possible to exceed 1,000 cycles as noted by some who
have said they did; however you can't be sure how they arrived there. A
matter of use-patterns and careful consideration on what the portable does
in the course of a few years time could make a difference in battery life.
Yet some batteries can go bad without timely cycling and use. But do not
let the batteries go flat, recharge before they get too low so they don't see
any damaging discharge.
With the extended AppleCare plan, an option, the battery is covered for the
total duration of the extended plan. With a built-in battery, that is a fair deal
since the replacement, when covered, includes labor. Some models were
made in such a way as to allow a careful out-of-warranty battery replacement.
Check the online sources such as iFixit to see if after AppleCare, you would
even want to try to replace the internal battery. The AppleStore Genius could
do it for a slight fee over the cost of a replacement battery at that time.
With my (now older) Apple portable computers, I use a laptop stand, USB mouse
and keyboard, powered USB hub, wireless base station with Ethernet option,
both wired and wireless printing, & do not use an external display though I could.
That said, I use a Mini (Late 2005) G4 1.5GHz most of the time. My computers
stay on most of the time, and are allowed to sleep. They have some degree of
protection from power grid ill-effects through use of a power conditioning UPS
that can automatically switch when power goes up or down, and provides some
degree of run-time when the power goes Out. Not a whole bunch, though.
With an external display, and other accessories needed to use the Mac and to
shut it down when the power goes completely out, you may need to use more
than one UPS or uninterruptible power supply, but in some cases it has been
suggested in prior manufacturer publication, to not attach the UPS (whatever
brand) so they use the same wall socket; the excess power is expected to
surge or bypass the UPS and go to the Grounding wire. Be sure there is one.
Anyway, I have a few ideas and due to a few losses from trees hitting lines,
and outages lasting more than a week, with use of 'soft-power' generators,
my experience may vary as could my advice. Plan for the worst and hope...
Good luck & happy computing!

Factory Reset MacBook Pro (Mid 2012)

I want to factory reset my MacBook Pro (Mid 2012), which doesn't have a disk drive. Do I need to take it to an Apple Store for resetting, or is there a way I can do it myself?

See...
What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
Also See Thomas Reed's How to Prepare your Mac for sale

Plugged iPad into Macbook Pro - initial set up

Just got an iPad 4 a few days ago and liking it.
Today I plugged into my macbook pro, wanting to transfer some music over, and it asks me whether I want to either restore from a backup (only my phone backups are there or set up as a new ipad. I don't want to do either! I already set up as a new device when I got it and I've done a bunch of work on the ipad already that I don't want to lose.
What sh

iTunes sees your iPad as a foreign device because you set your iPad up without using iTunes and haven't synced yet.
However, you do have a couple of options to accomplish what you want to do. If you just want to move some music to the iPad, you can turn off auto sync and manually manage the songs.
You can read about manually managed content here.
http://support.apple.com/kb/ht1535
If you have decide that you will want to sync with iTunes in the future.... If you have photos or home videos that you want to transfer to the iPad .... You can make this your iPad's iTunes library by following the instructions in this user tip.
Syncing to a "New" computer.
https://discussions.apple.com/docs/DOC-3141

I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. My iBook library does not show up in iTunes.

I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. Some of my iBooks show up in my iTunes but they are "grayed" out. The only books that respond in iTunes are audiobooks and that's not what I'm looking for. Is this a stupid question?

Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

2 thunderbolt displays worked fine daisy chained, moved one to work in other room, now only one will work. both work independantly or both plugged into my macbook pro.

I have 2 thunderbolt displays and have had them daisy chained for months where I only would plug one into my macbook pro 15" retina and both displays have worked great. The other day I moved one of them into the conference room, connected also a HDMI cord to a projector to do some work with staff on software design.
I brought my thunderbolt back into my office and plugged it back into the other thunderbolt dispay, then plugged the other display back into my macbook and started it up and now I can only get one to work daisy chained. They both work great independantly or if both of them are plugged into my macbook pro, but not daisy chained any longer.
Is there a setting I need to look at to maybe reset so that my macbook pro will use both thunderbolt displays daisy chained?
Thanks for anyones advice and sharing any similar issues and how you fixed the issue.

Hi there,
The first thing that I would recomend is resetting the PRAM on your portable.
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/ph11243
If the issues persist, then you may need to force the device to detect displays.
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/ht5369
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
- Griff W.

I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.

I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.
Also, I had to install the software twice on my same computer before because I had to reboot the computer. I don't know if this affects the limit.

You are allowed to have two activated installations so there should not be a problem having working installations on the two machines. If by chance you have somehow tied up two activations for the one machine you can have Adobe support help resolve that thru chat.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer see

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!

11lizzyp wrote:
can't be saved because the file is read-only.
I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
More on versions here:
http://support.apple.com/kb/ht4753
local snapshots:
http://support.apple.com/kb/HT4878
Sounds like a permissions problem ie read only.
If running repair permissions from your DiskUtility.app does not sort it,
Someone should jump in here with erudite and concise fix.

How do I clear Blocked Plug-in on MacBook Pro 10.6.8?

How do I clear Blocked Plug-in on MacBook Pro 10.6.8?

By installing the current version of Flash Player. Adobe website.

I want to plug in my macbook pro MD101LL 2012 to my old TV that has only RCA inputs. What adapter do I use?

Similar Messages

Maybe you are looking for