I want to read system information

hi
i have got a problem here.
i have to read the system information like the CPU speed, RAM size etc.
I could not get idea how to do that.
please help me solve this problem
thanks in advance

If you don't want to have to learn how to use JNI, you can make use of the work that others have done. For instance, SIGAR has a very comprehensive set of functions for querying hardware, and it works on a wide variety of platforms too.

Similar Messages

  • Read System Information from the Client

    Hi,
    i am looking for a java native interface that allows me to read the client's system information like it can be done with the sigar lib.
    http://support.hyperic.com/confluence/display/SIGAR/Home
    Does anyone know if there are alternative native libraries available?!
    Thanks in advance,
    Patrick

    I'm doing exactly the same in both projects.The OS loads the library into the process space.
    You know it works in java. Thus it means specifically that it is an environment problem. It is not a java problem and it is not a library problem.
    The problem is that the library fails to load.
    General reasons for loading failures. There might be others.
    - It isn't a library. Can't be this because you got it to work already.
    - It has dependencies, other libraries, that don't exist or are not in the shared library path.
    - It isn't in fact the same as the other webstart app. Different location, different coniguration, permissions problem, something else.

  • I want to read system registry and installation date of that

    Hi All,
    I want to read a registry of one product and the date of installation of that registry.
    please can any one answer.

    Hi-
    The limitation of OS would be because of the processor speed- need a minimum of 867mhz to run Leopard.
    If you were to upgrade to a 1.2ghz, or better, the OWC 1.5ghz processor, you would realize speed that would be worth the upgrade. This would also help you run more current software, and of course, Leopard.
    The two processors that I think have the best performance vs. cost, are the OWC 1.5ghz 7455 based processor, and the Newertech 2.0ghz 7448 based processor. Both will run the more current softwares, run Leopard, improve graphics intensive work, and really increase performance over the OEM processors.
    Of course, all other processor upgrades will increase performance, I just feel that these two offer the most "bang per buck".
    FYI, the 1.5ghz (runs 1.47ghz in the DA) gets Xbench scores of 60-65(avg.). This is in comparison to the dual 533mhz DA which scores 30-35(avg.) That is a healthy boost, pretty much double, and moves the DA into the realm of dual 1.25ghz MDD scores.
    BTW, the 1.2ghz bumps Xbench scores to 45-50.
    And yes, thanks for the stars!

  • Reading system information?

    Just that... How would I go about getting information about the system a java program might be running on ? Is there an API for this or am I going to have to get tricky ?

    Got a platform-independent way to check CPU load? Or
    the amount of free space on a disk? ;) There are
    reasons you might want to know.And those things probably don't belong in a java app. Use the right tool for the right job. And if they did, you'd write native code, specifically for the platform, distributing a Windows-implemented DLL on Windows, and something else on a UNIX platform (.so file?) and your java app would still not need to know, as it would just make the JNI call to the platform-specific code.

  • Envee - A versatile system information script for screenshots

    envee
    envee is a light bash script inspired by archey and screenFetch. It currently can display 4 different Arch Linux ASCII logos, along with information about the system.
    My goal is to allow for many different variations, many different options, so that every user can make the output look the way they want.
    Any system information entry can be modified, and new entries can be defined.
    Usage
    usage: envee [option]
    general options:
    -h, --help print this help message and exit
    -v, --version print version info and exit
    art options:
    -A, --Art=ARTOPT change the ASCII art
    --gallery display all possible ASCII art choices
    [~/sour] [6] $ sour --help
    color options:
    -a, --art-color=COLOR change the art color
    -l, --label-color=COLOR change the label color
    -d, --data-color=COLOR change the data color
    color choices:
    red, green, yellow, blue, magenta, cyan, white
    r,g,y,b,m,c,w
    variable options:
    -s, --set VAR=VALUE define new or existing variable
    variable choices:
    host, shell, editor, kernel, cpu, explicit, foreign, term, other
    examples:
    envee -a white -l blue -d white -s WM=dwm
    envee --art-color=magenta --set shell=zsh
    envee --set host=modula-1 --set editor=vim
    envee --Art=poison --art-color=green --label-color=white --data-color=red
    [~/sour] [6] $ sour --help
    Screenshots
    Also
    The github repo is here
    It's on the AUR as envee-git: here
    Any input would be appreciated
    Last edited by wolfcore (2012-04-08 22:24:49)

    Hi Kevin,<br />Here is another version.<br />copy/paste into a text editor then save as a .jsx and place it in the script folder.<br />The only thing you have to modify is the name of your pdf preset. I thought about a dialog where tou could have switched frome one preset to another easily. But it may much more efficient to just modify the name of the preset. If you want you an also make a copy with another PDF preset then rename it.<br /><br />ad = app.activeDocument;<br />pg=ad.pages;<br />var docpath = ad.filePath;<br />var docname = ad.name;<br />var nb = (Math.round(Number(pg.length/2)))<br />for(i=0; i<nb;i++)<br /><br />{<br />]var pgrgstart = (pg[(2*i)].name);<br /><br />]if(pg[(2*i+1)]==-1)<br /><br />]{<br /><br />]]var pgrgend = pgrgstart;<br /><br />]}<br /><br />]else<br /><br />]{<br /><br />]]var pgrgend = pg[(2*i+1)].name;<br /><br />]}<br /><br />]app.pdfExportPreferences.pageRange = pgrgstart+"-"+pgrgend; <br /><br />]var myPDFExportPreset = app.pdfExportPresets.item("your PDF preset"); <br /><br />b //enter the name of your PDF preset instead of your PDF preset<br /><br />]ad.exportFile(ExportFormat.pdfType, File(docpath+"/"+docname.split(".indd")[0]+"_"+"pg_"+i+"_to_"+(i+1)+".pdf"), false, myPDFExportPreset); <br /><br />}<br /><br />alert("done");

  • System preferences wants to use confidential information stored in my keychain

    Images are not being displayed in emails on my Mac. This includes sending photos from iphoto via email. When going in to System Preferences to see what I need to check, I get the window which reads "System Preferences wants to use your confidential information stored in "imap.aol.com" in your keychain. Should I "always allow", "deny" or "allow"?
    I recently synched my contacts via icloud with my mac and my iphone (which created a whole different problem). That is the only thing I can think of that I have done recently (?). Speaking of the contacts issue, now my phone does not have the phone numbers and all of the information of my contacts as I had on my phone before the icloud synch. Now, the contacts in my phone seem to be mostly email addresses that were stored on my mac and no phone numbers!!! WT? Help. My love for Apple is waning.

    I too am losing confidence in Apple. I want to be able to make these choices and still have access to my apps.

  • I want to get system hardware information

    I want to get system hardware information like
    processor serial no mac address etc using preferebly in java.

    Hi,
    If U want the hardware information in unix machine sysdef,uname -p for info on the processor,ifconfig -a for ip and mac address ,netmask.

  • FW: [Adobe Reader] I want my credit card information to be removed from Adobe's file and I can't find a phone number to contact someone in your company, how come, please help!  Lucie

    What a dumb answer, the payment is done and charged already,
    ADOBE DOES NEED MY CREDIT CARD INFO ANYMORE, PLEASE REMOVE IT
    FROM YOUR DATABASE AS I CANNOT DO IT MYSELF.  It is quite annoying
    to be controlled like this, please confirm that my request has been answering
    with intelligence please.
    Lucie Lévesque
    Date: Mon, 8 Dec 2014 08:09:59 -0800
    From: [email protected]
    To: [email protected]
    Subject:  I want my credit card information to be removed from Adobe's file and I can't find a phone number to contact someone in your company, how come, please help!  Lucie
        I want my credit card information to be removed from Adobe's file and I can't find a phone number to contact someone in your company, how come, please help!  Lucie
        created by Bernd Alheit in Adobe Reader - View the full discussion
    Adobe needs the credit card information for the payments.
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6995243#6995243 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6995243#6995243
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

    Adobe Reader is a FREE program, so you would not enter a credit card
    If you have a subscription to a PAID program, removing your credit card information would cause that program to stop working when you stop paying for your subscription
    If that is what you want, here is the information on how to cancel
    Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Error while reading PO in backend system Inform system adiministrator

    Hi All,
    I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
    When I check the PO number in R/3 it does not exist.
    The number range is correct both in SRM and R/3 (external no. range is ticked).
    Also I could not find any logs in RZ20 nor a dump.
    When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
    I am on SRM version BBPCRM 4.0 SAPKU40007
    R/3 version 4.6 C SAPKH46C47
    Thanks in advance,
    Rgrds,
    Raj
    Message was edited by:
            Raj Malhotra

    Hi
    Have you tried out this ?
    <b>There are two BADIs which might help you in achieving the job.</b>
    <u><b>BBP_EXTLOCALPO_BADI</b> [Control Extended Classic Scenario ]
    <b>and</b>
    <b>BBP_GROUP_LOC_PO</b>
    [Exit Grouping of Items for Local Purchase Orders]</u>
    <u>Read the documenatation first, using transaction - SE18
    before implementing them for your requirement.</u>
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Want to know that any standand Tcode about PC System information ?

    Dear Experts,
                         I Want to know that any standand Tcode about PC System information ?
    ie, a hardware Engineer,System Admin can know a PC system information details like operating system, Processor & mother board, drives, RAM Memory Details, Network etc..
    Thanks..

    Hi Sweta,...
    yes the above ans is correct... you can make a simple report using class interface 'CL_GUI_FRONTEND_SERVICES'
    It will not provide such details that u had asked for, but it gives some very important system info tht can be useful ......such as
    GET_COMPUTER_NAME                          - Get Computer Name
    GET_DESKTOP_DIRECTORY                  - Get Desktop Directory
    GET_DRIVE_FREE_SPACE_MEGABYTE     - Returns Drive's Free Space in MB
    GET_DRIVE_TYPE                                    - Get Drive Type                                                                                 
    GET_FREE_SPACE_FOR_DRIVE          - Returns Free Space on Drive
    GET_GUI_PROPERTIES                               - Returns Stream of GUI Properties
    GET_GUI_VERSION                                         - Returns the Upload/Download Paths
    GET_IP_ADDRESS                                         - Gets IP Address
    GET_PLATFORM                                    - Return Operating System Platform
    GET_SAPGUI_DIRECTORY                            - Gets GUI Start Directory
    GET_SAPLOGON_ENCODING                       - Return to saplogon Codepage
    GET_SYSTEM_DIRECTORY                     - Get System Directory
    GET_TEMP_DIRECTORY                            - Returns the Path to the TEMP Directory
    GET_USER_NAME                                         - Get User Name
    Making report to display this parameters will be very simple task.
    Hope this will be usefull

  • Can I embed C# Email code in .pdf file to send user and system information when it opens on system

    I have a pdf on my system. When I opened it it should email the current  user account and system information( like IP, Windows login Id).  If the system does not have internet it should not show the error.
    Is it possible? If so could you suggest a way or provide a link.
    Due to security we want this feature.
    Your help is appreciated.
    Thanks

    You could track the user's email login/IP address if you secure the file using DRM (LiveCycle, etc.), but a PDF which sends silent emails containing personal data about a user would be considered a trojan by the vast majority of people.

  • In system information, battery information for 17in m.b.p

    in system information, battery information for 17in m.b.p what should the readings be for a new battery,anyone, thanks peter

    If you want reliability and a battery that has a warranty, have Apple install it for you and pay the price.  If you want uncertainty and the possibility of a battery life of a month, a week or less, purchase a third party battery.
    To date I have yet to see with certitude a genuine Apple replacement battery offered to the public.  I have seen many tales of woe of users who have purchased third party batteries and have regretted the decision.  Often in the long run, these purchases cost more than an Apple battery.  Search these forums and my view will be substantiated.
    Your choice.
    Ciao.

  • In system information Bluetooth is Discoverable:Off. AirDrop problems

    Hi. I wanted to send a video from iphone to my mac by using airdrop. But my iphone dose not show my mac, meanwhile my mac is showing iphone in finder->AirDrop. I got late 2012 macbook pro and iphone 5s Both devices are updated to newest os. Both devices are set to "allow me to be discovered by everyone". I read a lot of articles about how to fix this issue but none of them helped me. So it think i found out where is the problem. In system information->bluetooth Discoverable: is set to Off. How do i turn Discoverablety back ON? I think this may solve my issue. If you think i am wrong, Hope fore another solution.

    Reinis,
    In order for System Information to read "On" in Bluetooth Discoverable you need to turn on the Bluetooth Sharing under the Bluetooth Preference Pane.  However, this did not resolve my issue with my iPhone Airdropping to my Mac.  My Mac has no problem AirDropping to my iPhone.  Good Luck!
    I'm on a 15 Macbook Pro Retina: early 2013 using iPhone 6.
    V1ck1H

  • System information reports

    I'm trying to run a report that would potentially give me all the system information for all the solaris servers.
    So I add all the solaris servers to the target list
    On attributes i select the ones I want (typically hostname, hostID, serial number etc)
    Now, on the filter screen I want to select ALL the servers. Is there a special word to select this ? (putting in a * gives me absolutely nothing)

    anyone know how to do this ?
    or is it just one of those things that cannot be done ?

  • How to get system information on a visual composer model

    Hi,
    We are trying to build a model that will use some images, since we can not add images to the VC library we need to call the images using an URL, but the problem is that we would like to avoid to hard code the URL, since that will create a problem when we move the models across the landscape (DEV-TST-PRD) and we were thinking to use the system information to build the URL using an expresion.
    Is it possible to get the system information on VC? just to clarify if I can get the system ID (system name) that will help us to define the URL.
    Is there any other best practices to handle URLs without hard coding them?
    Thanks for your help,
    Zareh
    Edited by: Zareh Vazquez on Aug 25, 2009 11:41 AM

    You can add images to yoru VC solution model directly by selecting from the tools menu --> Image Manager then loading yoru images.
    You can now reference these images from within your model as variables. Two controls that support this directly are the command button or image control. You will see under their propoerties values the image "tab" - you can now associate images you loaded for the Image Manger dynamically.
    If your images are large and you want to store items for your portal in an external reference (outside VC). E.g. KM repository. You can define a shorturl for it and set a hyperlink object using this from VC or use the PCD address where the object is stored.
    If you are trying to collect the portal url from R3/BI you can use the RSPOR_T_PORTAL (Maintained by BASIS) table values by using the BAPI RSWR_PORTAL_CONFIG_GET which will allow you to establish teh portal url prefix remotely.
    Trust this resolves your challenge.

Maybe you are looking for