I want to see both the ssid in same time

help in aironet 1200
i hope to help me,
i have created two ssid with two vlan's but the broadcast is for one ssid only, i want the broadcasting for all my ssid in same time. where that the one ssid be appeared and other one be a hiden.
so how can i do that?
I want to see both the ssid in same time
EXD-AP#
EXD-AP#sh run
Building configuration...
Current configuration : 4617 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname EXD-AP
ip subnet-zero
ip domain name Schoch-home.com
ip name-server 172.16.0.3
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
dot11 vlan-name test vlan 1
dot11 ssid EXDINT
   vlan 30
   authentication open
   authentication key-management wpa
   guest-mode
   infrastructure-ssid
   wpa-psk ascii 7 14120A0F410D243F04796166
dot11 ssid GUEST
   vlan 20
   authentication open
   authentication key-management wpa
   wpa-psk ascii 7 13000F1646050A3E0B777A62
username 78e400ed9588 password 7 06515724181E591C014E475354
username 78e400ed9588 autocommand exit
username 001e65ee5c38 password 7 135547430E5A512F2E712B606D
username 001e65ee5c38 autocommand exit
username 002668ec5b49 password 7 144742595A52722E277D31617B
username 002668ec5b49 autocommand exit
username 0022fc5b437b password 7 15425B5E562C28712A67667511
username 0022fc5b437b autocommand exit
username 00234d9fa256 password 7 075F711E1D5D1D5C1113595952
username 00234d9fa256 autocommand exit
username iqbal privilege 15 password 7 00010B02240A5955
username c417fea872a3 password 7 04585F575827494F514E571641
username c417fea872a3 autocommand exit
username 0016cf264d57 password 7 040B5B5759224A1C5F4D014245
username 0016cf264d57 autocommand exit
username exd-hq privilege 15 password 7 00010B02240A5955
username 00268202706b password 7 15425B5E527279747A64657411
username 00268202706b autocommand exit
username 002314054ea0 password 7 091C1E5B4A5443425E58012B7B
username 002314054ea0 autocommand exit
username 002436e8f6ca password 7 1249554546585A01722D722B32
username 002436e8f6ca autocommand exit
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
encryption vlan 30 mode ciphers tkip
encryption vlan 20 mode ciphers tkip
ssid EXDINT
ssid GUEST
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
station-role root
interface Dot11Radio0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio0.30
encapsulation dot1Q 30 native
no ip route-cache
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption mode ciphers tkip
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
interface Dot11Radio1.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio1.30
encapsulation dot1Q 30 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
ip address 192.168.30.10 255.255.255.0
no ip route-cache
duplex auto
speed auto
hold-queue 160 in
interface FastEthernet0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.30
encapsulation dot1Q 30 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.30.10 255.255.255.0
no ip route-cache
ip default-gateway 192.168.30.1
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 route ip
line con 0
line vty 0 4
end
EXD-AP#
EXD-AP#
EXD-AP#

I think that my AP not support the MBSSID doue to it's very old , can update it ? if i can that how i do that?
System Software Version: Cisco IOS Software
Product/Model Number:
AIR-AP1210
Top Assembly Serial Number:
FHK0712J02R
System Software Filename:
c1200-k9w7-tar.123-8.JEA3
System Software Version:
12.3(8)JEA3
Bootloader Version:
12.2(8)JA
System Uptime:
3 days, 32 minutes

Similar Messages

HT204053 Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Go to Settings>iCloud and sign in with your Apple ID to create the account. Then turn on the data you wish to sync with iCloud. See http://www.apple.com/icloud/setup/ios.html.

HT4400 I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

This should be able to help ya out -> Support for wireless braille displays in iOS 6

If I want to see all the outgoing mails that were sent today, how to do it

Hi,
I'm useing the IC webclient INBOX.
In the inbox I can't see outgoing mails unless it is linked to interaction record.
why ?
If I want to see all the outgoing mails that were sent today, how to do it ?
Thanks in advance.

Hi,
With a sapgui connection, you can use transaction code SOST to see outgoing mails.
Regards,
Olivier

In St07 there we can see both the hostname but DB is virtual IP

Dear All ,
I have one query regarding Stand Alone DB server .
We have 2 node of server 1 active and 2 pacive for sap there is one virtual IP and one for oracle virtual IP.
Now my question is when we run st07 there we can see both the hostname name under SAPOSCOL destination.
So is a Stand Alone DB server and can we start the OSCOLLECTOR for this server .
I have tried to run sm35 to but in Exec. Target it is giving only one server name that is Application server. So how can we run the report on DB
Regards,
Kumar

I believe we are using file shareing, not photostream

Vista Recovery crashed, Both the model is same, just OS are different.

Hi,
My model no is HP Pavilion Slimline s3760in Desktop PCs. My PC came with the pre-installed windows vista home premium 32-bit. i had problem with the dvd writer and it has been replaced recently and dvd is working fine.
When the writer was in defect at that time i have inserted the recovery disc into the dvd drive and wanted to recover my system to the factory settings. there was problem in writing/burning but atleast the dvd rom was able to read it therefore i thought the recover will work but unfortuantely it dint create any recovery to my system into factory settings and when i ejected the dvd i found that scatched has been created on it. the recovery set of dvd has gone and it is unable to use it at all.
It has formatted the partition and it was unable to progress further.
At present i am unable to recover my system from RECOVERY DVD neither from Hard disk. Unable to use F11 recovery. Both are corrupted.
My friend has purchased same desktop model i.e. s3760in , but he has received pre-installed windows 7.
Therefore i want to know that if i bring his recovery disc and install it from the dvd.
q1] then will i get windows 7 and recovery manager for windows 7 or not?
q2] will it will work or not ?
Both the model is same, only OS are different.
please reply asap, as i need to fix this problem.
thanks inadvance.
bye

Hello Varadar, As far as I know, there is no such thing as a HP Master disk for a HP Recovery Restore. If the customer creates a set of HP Recovery Restore Disk and they are faulty and the D: Recovery partition is corrupted as well, then the customer can order a set of HP Recovery Restore disk from HP if they are still available for his system.
HP makes these disk available for just a few years. If these are no longer available the customer would have to purchase a Retail version of the operating system and any other software they may want.
The HP Recovery Restore disk are made from the software that has been installed on the system when the system was built, so almost every system will have different software.
The data code the is copied to the HP Recovery Restore Disk set is located in the BIOS of each system and relates to the serial number of the system. That is the key, the serial number of the computer.
When the HP Recovery Restore disk are used to restore a system, the Recovery Restore disk will read the BIOS for the correct serial number, before it will continue.
If you were to order the HP Recovery Disk set for a particular system, you would be required to provide the exact Model and Serial number for the system, and then HP could look into their database and determine what software was installed on that machine and then create a set of HP Recovery Restore disk for that serial numbered machine.
If your hard drive were to become faulty and under warranty, HP would look up the serial number of your system and determine the software that was shipped with this system and then install the software on a hard drive, and if the customer had the capacity to replace the hard drive, HP would ship a new hard drive with the D: Recovery partition already created, and the customer would install the new hard drive.
If the customer did not have the ability or knowledge to change a hard drive, the system would have to be sent back to HP for the hard drive replacement.
This is done to prevent pirating of the software and certain legal obligations to the providers of the software, such as Microsoft.
There is simply no way around this. Many have tried and all have failed. This is by design.
Hope this clarifies the issue a little more.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

I am trying to download a movie in iTunes and I was asked two security questions. They are different form the questions I chose and whenever I exit and try again, I see that the questions change every time. How can I reset the questions?

I am trying to download a movie in iTunes and I was asked two security questions. They are different form the questions I chose and whenever I exit and try again, I see that the questions change every time. How can I reset the questions?

From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

My Epson 645 printer can't see the SSID from my Time Capsule but computers and iPhones can. Any explanation/fix?

I could understand better if none of my devices could see the AirPort, but everything works fine except my Epson printer and my Canon printer--they simply can't see the SSID when I try to set them up.
I've had them a year, they have been working fine until today. I simply can't explain the printers couldn't se it, but everything else can.

Power cycle the printers themselves is perhaps the most important.
The wifi outage is related.. no doubt about that.
Sometimes Apple names are difficult for non apple (ie stuff made by anybody but apple) to work with.
If you have no luck.. full reset is the order of the day.
Use all names that meet SMB network standards.. that means short,, no spaces.. and stick with pure alphanumeric.
Apple wizard chooses your name.. plus device name.. so you end up with a name like
Fred Blog's Airport Time Capsule
This is hopelessly wrong.. reduce it to FBATC
The wireless name can be even worse..
When things go wrong.. setup names that are different for both bands.. and put the band in the name.
So tc24ghz and tc5ghz work well for me. I often will have a gen number in there as I repair them and need to know which is which so tcgen324ghz is meaningful.. note no full stop.. no punctuation.. no spaces.. you could use other characters like dash or underscore.. but like I said.. stick with simple.
Last bit is channels.. wireless is subject to interference.. one thing that can happen is someone starting up a wifi device near you.. (or a microwave with a leaky door etc). Stick to fixed channels.
The idea is to remove the level of voodoo as much as possible.. ie from 80% to a mere 66%..
All wireless is voodoo but by controlling as much as you can.. you can reduce it slightly.

I want to see all the EE data plan options.

i Have signed up for 1 month 50M EE data plan but I want to see the other options. iPad just says I already have a plan and won't show other options. The EE site is no help either

I Am from the U.S. I just tried a search for EE data plans and was able to see their web site that had information on all of their plans. If you can't find what you need there, then you may need to go to their office / store and talk with someone directly. There isn't much we can do for you here. This is a user to user forum.

I want to SEE all the FONTS!!! I could in Word!

Ok so here it is, this has been bugging me for some time. Is there anyway of allowing the font list in the floating font box to display the fonts so i can see at a glance what font i need, rather than having to select a word to see what the font looks like. The font preview box is just not good enough. If not i hope that future versions of Pages will have this feature as it would speed up my work flow greatly.
Many thanks,
Alex

This was already selected, but still no fonts show even when i hold the option key. I'm sure i must doing something wrong though.

When I edit a contact's email address and then type the name in the Mail App, I see both the new and old address. Why don't I see only the new email address?

When I edit an email address in the Contacts App, and the type the Contact's name in the Mail App, I get both the old and new contacts. Why don't I get only the updated email address?

Mail remembers previously used email addresses for a period of time. Those you no longer use will eventually disappear. After you have sent one or two emails to the new address the old address will move below the new one. Then after a period of time not sending to the old address it will disappear. Patience is the key.

Can I update both itunes & ipod at same time?

I have noticed that a lot of the cover art is wrong. I seem to be able to find either correct cover art or more appropriate pictures on the web. I have been doing a cut & paste into the cover art tab which is under the get info tab.
This updates the picture in iTunes but not whats on my ipod. Is it possible what when I update iTunes I get my ipod updated at the same time? Note I do not want to go to a full synchronization where that both iTunes & my ipod are identical. I only want to get both locations updated at the same time when I'm connected to the web & updating itunes cover art. Please advise.

You can't. Just delete the offending songs off your ipod, then resync.

I've updated to Firefox 14, and when it's open and I open my email Firefox disappears, and vice versa. I need both on screen at same time. It's no good.

On my MAC, with Firefox 14, (Firefox has been my favourite browser till now) it is impossible to have both Firefox and Emails, or Firefox and Safari, or Firefox and Address Book, or Firefox and iCal. Whichever I'm on when I open the other, the first immediately shoots up and out of vision or down and out of vision, only coming back when I click on the Dock icon for the particular item – Firefox, Mail, Safari, etc. It is so annoying and hugely time-wasting as I like to have all these open at the same time for the work that I do as a literary publisher.

Try to remove the Firefox plist file (org.mozilla.firefox.plist).
*http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)
You can check for problems with the localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

HP Stream 8 tablet cant see external & internal drives at same time

I have an HP Stream 8 tablet. I have plugged an OTG 64gb flash memory card Sandisk Dual USB drive into the tablet charging slot. The Tablet recognises all of the 64gb of storage & can read & write to the drive with no problems.
However, when an external storage drive is plugged in, the device cannot see the 32gb sandisc micro usb , which I installed . The tablet only seems to be able to see 1 removable drive at one time, which is frustrating as I cant then copy items from the micro sd to an external drive.
Is there a way to make windows/hp stream tablet see all drives at the same time. I have insufficient space on the built in 32gb drive , after win 8.1, office 365 & other programmes are installed so I can't copy items onto that drive.
When the external flash is connected, I can only see the C: Drive & the plugged in flash drive. When the external flash drive is disconnected, I can then see the c: Drive & the microsd32gb card.
One of the problems I think is that the tablet doesnt seem to always assign drive letters to extra storage drives. How do I activate this?

It's something to do with the OTG 64gb flash memory card Sandisk Dual USB drive. Mine sees an internal 64GB uSD & a flash drive connected with an OTG cable. Drive letter asssignment is a Windows thing. You can customize it with USBDLM.
http://www.uwe-sieber.de/usbdlm_e.html

Duplicate a composition layer in the timeline, at same time make new comp

Hi,
I know that in the project panel I can do Control D and make a new comp. I know that in the layer panel I can do control D and make a new layer for a different comp, which keeps all the animations I have applied to that comp.
I also know that after I've duplicated that comp in the Project Panel I can Alt drag it to the other comp in the timeline and replace, or swap the comps.
What I want is to remove a step.
I have Comp A
In the timeline I want to duplicate this comp and at the same time create a new Comp B.
What I want is to be able to duplicate the layer in the timeline, and while doing so also create a new composition which would show up in my project panel. Basically I am trying to skip the extra steps of duplicating layer, going to project panel, duplicating comp, then Alt dragging to swap them.
Is there a shortcut for this?

Mylenium, why would you think there should be no shortcut for this?
You are forgetting, that pre-comps in themselves can contain any number of pre-comps inside pre-comps inside pre-comps.... You would have to find a way of taking care of those scenarios which is a major logic challenge and effort. that being so and to avoid potentially risky user operations that might ruin entire projects, it is much safer to not allow this. I would agree with Rick that a simple script that mimics the manual steps and tied to a function key is probably as good as it gets, but still, even there the underlying deeper problem still exists, so you have to work very controlled.
Mylenium

I want to see both the ssid in same time

Similar Messages

Maybe you are looking for