I want to sync the data between two windows device, but I can't find my security key.
Please send me a guide about how to setup the sync data with windows device.
I can't find account management in sync tab.
See these Sync KB articles: <br />
https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync<br />
https://support.mozilla.org/en-US/kb/add-a-device-to-firefox-sync<br />
https://support.mozilla.org/en-US/kb/find-code-to-add-device-to-firefox-sync<br />
https://support.mozilla.org/en-US/kb/how-do-i-choose-what-types-information-sync-firefo
Similar Messages
-
How to sync the data between the two iSCSI target server
Hi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
ThanksHi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
Thanks
There are basically three ways to go:
1) Get compatible software. Microsoft iSCSI target cannot do what you want out-of-box but good news third-party software (there are even free versions with a set of limitations) can do what you want. See:
StarWind Virtual SAN [VSAN]
http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
DataCore SANxxx
http://datacore.com/products/SANsymphony-V.aspx
SteelEye DataKeeper
http://us.sios.com/what-we-do/windows/
All of them do basically the same: mirror set of LUs between Windows hosts to emulate a high performance and fault tolerant virtual SAN. All of them do this in active-active mode (all nodes handle I/O) and at least StarWind and DataCore have sophisticated
distributed cache implementations (RAM and flash).
2) Get incompatible software (MSFT iSCSI target) and run it in generic Windows cluster. That would require you to have CSV so physical shared storage (FC or SAS, iSCSI obviously has zero sense as you can feed THAT iSCSI target directly to your block storage
consumers). This is doable and is supported by MSFS but has numerous drawbacks. First of all it's SLOW as a) MSFT target does no caching and even does not use file system cache (at all, VHDX it uses as a containers are opened and I/O-ed in a "pass-thru" mode)
b) it's only active-passive (one node will handle I/O @ a time with other one just doing nothing in standby mode) and c) long I/O route (iSCSI initiator -> MSFT iSCSI target -> clustered block back end). For reference see:
Configuring iSCSI Storage for High Availability
http://technet.microsoft.com/en-us/library/gg232621(v=ws.10).aspx
MSFT iSCSI Target Cluster
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
3) Re-think what you do. Except iSCSI target from MSFT you can use newer technologies like SoFS (obviously faster but requires a set of a dedicated servers) or just a shared VHDX if you have a fault tolerant SAS or FC back end and want to spawn a guest VM
cluster. See:
Scale-Out File Servers
http://technet.microsoft.com/en-us/library/hh831349.aspx
Deploy a Guest Cluster Using a Shared Virtual Hard Disk
http://technet.microsoft.com/en-us/library/dn265980.aspx
With Windows Server 2012 R2 release virtual FC and clustered MSFT target are both really deprecated features as shared VHDX is both faster and easier to setup and use if you have FC or SAS block back end and need to have guest VM cluster.
Hope this helped a bit :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
SQL - Can u print all the dates between two given dates (Without PL/SQL)
Hi Friends,
I want to know if u can print all the dates between two given dates without using pl/sql.
date1,date2 are given
write a sql statement to display all the dates lying between those two dates.
An earlier will be appreciated.
Thanks in Advance
Sriram
nullSriram,
Try this....
select to_date('01-JAN-00')+to_number(rownum)
from all_tables
where rownum < to_date('10-JAN-00')-to_date('01-JAN-00')
TO_DATE('
02-JAN-00
03-JAN-00
04-JAN-00
05-JAN-00
06-JAN-00
07-JAN-00
08-JAN-00
09-JAN-00 -
Intervals, synchronize the data between two oracle tables located in diffe
Hi Experts,
Is there any way I can, at set intervals, synchronize the data between two oracle tables located in different servers? What is the software, if there is any? If there are steps I can follow, so much the better.
Thanks!I'm not sure what you want to achieve here...
I want to synchronize both the Servers , so that it can update HO servers as well as Factory Server with the complete data. Could you please elaborate a little bit more; basing on your description I could also tell you how to setup timesync for those two servers if I understand "complete data" as the current date and time...
Also a lot of solutions are platform and version specific so it would help if you could indicate OS and Database Versions (4 digit).
And I still fail to see what this has to do with forms. You might want to post your question to the Database General forum: General Database Discussions
cheers -
How can I get extract the data between two cursors on an XY graph
How can I get extract the data between two cursors on an XY graph
Well, you say xy graph, so this might be a more complicated problem.
For a waveform graph it's trivial. Simply get the two cursor indices (property: cursor index) and apply them to array subset of the data. Is that all you need?
Here's how the above code would look like. using cursor.index instead of cursor.x elimnates the need to include scaling information.
For an xy graph, there could be multiple segments (e.g. imagine a spiral that passes the desired x range multiple times from both sides). This would neeed significantly more code for a general solution.
Message Edited by altenbach on 11-24-2009 07:53 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
cursorsubset.png 17 KB -
Query the data between two tables
Need help for query the data between two tables
Table 1: Time sheet
P.ID P.Name EmpID HoursSpend DateTime
c12234 Test 25 4 06/12/2013
c12234 Test 25 7 06/13/2013
c12234 Test 25 8 06/15/2013
c12234 Test 5 3 06/21/2013
c12234 Test 2 5 07/15/2013
c12234 Test 25 4 07/21/2013
Table 2: cost table
EmpID FromDate ToDate Rate
25 05/01/2013 06/30/2013 250
2 04/01/2013 05/31/2013 150
25 07/01/2013 09/30/2013 300
Output
P.ID P.Name EmpID HoursSpend DateTime Rate Total (HoursSond x Rate)
c12234 Test 25 4 06/12/2013 250 1000 (4*250)
c12234 Test 25 7 06/13/2013 250 1750
c12234 Test 25 8 06/15/2013 250
2000
c12234 Test 25 4 07/21/2013 300
1200
c12234 Test 2 5 07/15/2013 150
750
===========================================
Total 28
6700
============================================
Here EmpID =2 don't have rate in the cost table on july month should be pick from last entry from cost table.Hi Gopal,
According to your description, it seems that the output needn’t include the row when EmpID=2. Because the DateTime for it in Table1 doesn’t included between FromDate column and ToDate column. After testing the issue in my environment, we can refer to the
query like below to achieve your requirement:
SELECT time.*,cost.EmpID,cost.Rate,(time.HoursSpend * cost.Rate)as [Total (HoursSond x Rate)]
FROM [Time sheet] as time
INNER JOIN
[cost table]as cost
ON time.EmpID = cost.EmpID
AND time.DateTime BETWEEN cost.FromDate AND cost.ToDate
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Select all the dates between two txt fields. how?
In a 6i form cursor I need to select all the dates between two provided dates. I have two text fields FLD1 and FLd2 with date datatype. There is no table behind both the fields.
For example
:FLD1:='01-MAR-2013';
:FLD2:='10-MAR-2013';
Now I have to select all the dates from 01-mar-2013 to '10-mar-2013'. how to do it?Gul wrote:
In a 6i form cursor I need to select all the dates between two provided dates. I have two text fields FLD1 and FLd2 with date datatype. There is no table behind both the fields.
For example
:FLD1:='01-MAR-2013';
:FLD2:='10-MAR-2013';
Now I have to select all the dates from 01-mar-2013 to '10-mar-2013'. how to do it?As'salamualikum Gul
Try this
SELECT TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum AS d
FROM ALL_OBJECTS
WHERE TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum BETWEEN TO_DATE('01-MAR-2013', 'DD-MON-RRRR') AND TO_DATE('10-MAR-2013', 'DD-MON-RRRR')Hope this helps -
How to share the data between two or more frames
How to share the data between two or more frames based on the database relationship in JDeveloper?
You can pass data between frames by passing it as parameters.
That is when you are invoking another frame, pass your data as arguments through the constructor to that frame .
You can also achieve this through static or public methods, but static variables as we know is not suggested which might occupy more memory space.
Regards,
Srinivasan AShwath
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
How to share the data between two or more frames based on the database relationship in JDeveloper? <HR></BLOCKQUOTE>
null -
How do you sync the calendars between two ipads?
How do you sync the calendars between two ipads?
You can enable iCloud syncing on both devices, making sure hte calendar is part of the 'on' part and then what you change on one should change on the other too.
-
I use Friend finder. I just want to know the date when I added my friends? Can anybody tell me how?
bobseufert wrote:
I thought it was a great way to lose friends. I don't know one person that would want me to be able to track their location.
I absolutely agree. I use Glympse if I need to let someone know my whereabouts for a short period of time. But, beyond that, ick! -
I bought songs on my laptop which synced to my iphone and iPad. But I can't find them on itunes library on my home computer. However, when I click download for the same song it says it has already been purchased. How do I find it on home computer?
Is your "home computer" the same as your laptop or are these two different machines?
-
have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed
Hello, Edward and thank you for your note.
I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
Regards,
Mike -
with my subscription creative cloud, I can accommodate 5 sites. It's not enough. I want to know the rates for more dh'ébergements. I can not find them. thank you
The pricing for business catalyst sites can be found on the below link...
US Monthly Pricing | Adobe Business Catalyst -
Dear Apple,
Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.Hey there thaovy309,
Welcome to Apple Support Communities.
The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
Take care,
-Jason -
ordered a TV series…I can see where the $$ was taken from our account but I can't find the shows anywhere in our itunes account.
Hello NMS1,
It sounds like you are unable find these TV shows you purchased in a series, but you have been charged for them. I would start by checking to see if you can download them from your Purchases in the iTunes Store with this article:
Download past purchases
http://support.apple.com/kb/ht2519
The steps are different if you are on an iOS device vs. a computer, so choose the appropriate section for the device you want to download them to.
If you cannot find it in your Purchases, I would next reach out to the iTunes Store support team for additional assistance:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
All the best,
Sterling
Maybe you are looking for
-
No sound in my iTunes 11.1.5 for Windows (64-bit)
My itunes (installed on my Windows 8.1 desktop) decided yesterday to not want to play sound. Itunes installed on my Windows 8.1 laptop plays sound just fine. All other sound related things work. You tube, whatever. Been reading several threads on sev
-
I have some photo folders on the Touch, but once they are on, how do you delete them if you need/want to?
-
HT204053 how do i authorize a computer to where i can download my music off the cloud?
How do i authorize my computer to download music off of the cloud?
-
Need a current copy of Adobe Flash Player
I installed a current copy of Adobe Flash Player but I'm still getting the message I need a current copy, WHY?
-
Posting of Security Deposit from Customer
Hi All I want to receive security deposit from a customer and post it to a special GL indiactor account. How to do that what is the T.code for that. Please help