I want to use a portion of an iTune song but the section begins 5:48 into the song. How do I edit the sound selection?
Adding iTune selections appear to be defaulted to start at the beginning of the song, and you just trim the end off. But I want to start my selection within the song. How do I edit the song to appear on the video so that I can use a portion of the song 5 minutes and 48 seconds into the song?
Here is a reply I provided last week. Hope this helps. Noreen
Drag the song in to start of show. There is an icon that looks like a gear at the beginning of the green song strip. Click on this to see clip trimmer. The song will open in the screen on the bottom half of the iMovie screen. You drag the yellow start line to the place where you want the song to start. As my children have shown me, watch for the spikes to see the exact place, but listening along works also. You can trim a song from the beginning and the end so that you only use 30 seconds in the middle, if that is what you want.
I would also suggest using audio control to fade the song in, especially if you are starting at a loud point. The default fade in is half a second. I change that to 1.2 to 1.5, depending on the song. Also, if one song is louder than the next, you can equalize the volume by setting sound at 120% or whatever you think sounds correct for a specific song.
When trimming for a song at the end of a slideshow, you may need to drag the black (or any color) screen in to end and set duration for a few minutes so that you will be able to trim the song. Otherwise, the program will only drag in as much of the song as you have video remaining. I know that sounds confusing but once you try it, you will see what I mean. Once you have trimmed the song the way you want it, delete the black screen and fade song to end.
Similar Messages
-
I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me! I have a macbook pro and iphone 5
lewbobber wrote:
Basically i need to either take it to a shop that can unlock i.e. £40.00
Be aware, you go that route & every time you try to update or restore, it will error out, leaving your phone unusable. Not to mention, you void all warranty/support.
Sell it & use the proceeds towards an officially unlocked iPhone bought directly from Apple.
Good luck. -
I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.
You cannot do that. The AppleID you used to create the iCloud account is an active primary email address. The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well). You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)? -
I have an iPod mini, 6 GB and want to use it with a Sony CD Boombox but the adapter is different. Can it still work? Don't want to try and break iPod.
Do you mean that the iPod mini won't fit on the "dock" because of shape (of the iPod), or is the docking connection a different type from the "30-pin" dock connector on the iPod mini?
-
I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?
Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331 -
Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud.
Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID. -
Have received a outstanding picture of the Iwo Jima Memorial in an e-mail. I want to use it as my backdrop on iPad 2. Anyone know if it is possible and how?
Save the photo from the received email - select and hold on the photo until prompted to save the photo.
The following was copied from the iPad user guide.
Wallpaper and Lock Screen Photos
You can display a photo in the wallpaper background of the Lock screen and Home screen. You can choose from several wallpaper pictures included with iPad, or you can use a photo of your own.
Set a photo as screen wallpaper:
Choose any photo and tap , then tap Use As Wallpaper.
Drag to pan the photo, or pinch the photo to zoom in or out, until it looks the way you want. Keep in mind that the image will be displayed in both portrait and landscape orientations but won’t rotate.
Tap Set Wallpaper. Then tap to use the image as wallpaper for the Home screen, on the Lock screen, or both.
To choose from several wallpaper pictures included with iPad, go to Settings > Brightness & Wallpaper. -
i want to use my phone whilest away traveling. do i need to get my phone unlocked, if so how do i?
You can either use your carrier's international roaming plan, or if you have an unlocked phone, you can use local SIM cards from any compatible GSM carrier. If your phone is locked, you will need to contact your carrier to inquire as to the requirements and fees to have it unlocked. Not all carriers offer unlocking.
-
I bought Ebey NEW Boxed (NEVER OPENED) 16GB Black Iphone 5 Virgin Mobile (USA) NO CONTRACT, want to use it in Europe, particularly in Ukraine, but for some reason now my phone does not see the Ukrainian GSM sim card. Please help to solve this problem.
Return it and get your money back. Virgin does not offer official unlocking, thus there's no way to get the phone officially unlocked for you to use it.
Sorry, but you wasted your money. -
just bought Ipad 2 16GB 3G for my mum but i want to use it first to set it up shouldn't it access my modem or do i still have to activate the sim?
You can setup with your Wi-Fi.
-
I just got a retro clock from brookstone and in setting it up it asked if I want to use current location which is incorrectly "Buffalo" but I do not know how to change it. Can anyone help me find where to change location?
As I understand it, Apple gets your location from the wi-fi router to which your iPod is connected. Location Services identifies the router and then checks for its location in Apple's database. If the router has been recently relocated or if there is a glitch in Apple's database, you will get an incorrect location. I don't think that there is anything you can do about it. You could send Apple a message about the error, but I doubt if they would do anything about it.
-
I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.
Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy -
I am using my Apple ID for me and for my wife. when I sync. the phones i lost all my wife contact. how do i recover the contact from i cloud?
While I have a few ideas, I think you'd have better luck troubleshooting this in the iCloud forum.
-
The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!
You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend! -
I have purchased Adobe Acrobat and my order number is 281998924. My previous Sony computer which used to Windows 7 crashed. I purchased a new Toshiba computer with Windows 8. How can I download the Adobe acrobat? I assume I don't have to pay for the program again? Thank you for all your help! Angelo.
If you had purchased Acrobat Standard subscription.
You need to download the application from below website :
www.cloud.acrobat.com
Sign in with Adobe ID and Password and once signed in click on Acrobat tab and download the application.
Sign in - Adobe ID
Maybe you are looking for
-
NI HyperTrend Control raises the CPU usage of NI Citadel DB and freezes it.
When a VI uses NI HyperTrend Control to fetch data from NI Citadel DB, the CPU usage of citadel is raised up to 10% and stops working. I don't know what "stops working" means since my coworker told me so. How can the control be prevented from freezin
-
Why can't I get ios 7 on my iPod touch 4 gen
I need help on why I can't get ios 7 I have ipod 4 gen
-
How does the extractor in FXCollections.observableList work?
How is the "extractor" supposed to work for ObservableLists? According to the JavaDoc it should trigger a update: > This list also reports mutations of the elements in it by using extractor. Observable objects returned by extractor (applied to each l
-
Gps tracking not accurate even at places away from buildings and trees
The big blue circle of gps is like half a kilometer wide.....it would shrink to like 70-80 ft then again widen up.....i updated my ios to the latest....gave my phone a hard reset....but nthing worked......what could be the problem here??? could it be
-
I've been trying to open InDesign again and I'm in an endless loop where it gives me the options of "show details", "OK" and "reopen" -- but when I click reopen it just does the same thing all over. FYI this is on an iMac with Maverick 10.9.3, and I