I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS. If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.

Similar Messages

I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers. I want a second display.

I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers so I am spelling it out here very specifically. I want a second display. This should be possible and would be awesome. Anyone know how to do this?

Nevermind I just installed it to try it and it's awesome, so happy right now, Thanks. All the things I had read about it on third party sites led me to believe it could not do extended desk tops, thanks for your help!

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

It can be done with analog but not digital thanks to "good 'ol" HDCP copy protection which apple (and most other manufacturers) unfortunately respect.
So you can take the analog output from your cable box (component -- 5 cables -- if it has it but generally they all have composite -- 3 cables) and feed it into some kind of converter or into some appropriate pci card for your mac pro. But none of them are going to let you directly use the HDMI output from the box to your computer.
Bottom line, no single cord is going to work and it will never be the higher quality digital picture you get on your tv.
Some qualification: There are boxes that I think support hdmi input. Look at Blackmagic. But I still don't think you can get around the HDCP from the cable box (might depend on the kind of cable box).

I want to install Snow Leopard Server on our MacPro (2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need to purchase another copy of Snow Leopard Server?

I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need topurchase another copy of Snow Leopard Server?

The OS disks that are shipped with a particular product
are set up so that tey will only install on that product.
It will install on any Mini of that exact vintage, but that
is all.
This is to prevent people from doing exactly what you
are trying to do. The license for OSX shipped with any
is only valid for that product. Also, Snow Leopard,
including Server, is only permitted to be run on one
computer at a time. Bottom line, unlike Lion, legally
you cannot install the same copy on multiple
computers unless some "family pack" or site license
is purchased.
Yes, you need to purchase another copy.
The copy of Snow Leopard license is here:
http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

emilypdunne wrote:
Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?
Is what you're saying that you only want backups in TM of the state of your Mac from January 2015 to the current date and nothing before then? I'd think the simplest solution would just be to delete in TM all the backups prior to 1/15 and then let TM do its thing. The ultimate source for all things Time Machine is here. On this page, note the comment that "Time Machine will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup" which I understand to mean that if you delete all the backups in the TM file prior to 1/15, any file that wasn't present on your Mac as of 1/15 will no longer be represented in the TM file. Note that the second link also has instructions for how to delete TM files.
If you were trying to accomplish something else, then as Emily Litella (Gilda Radner in SNL) used to say, "never mind."

I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy

I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy and will it transfer all my musc and photos?

The Setup Assistant can restore your data from a Time Machine backup. You'll be asked if you want to do this the first time you turn the computer on.
(60797)

I have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone,

have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone, but I only have my one computer, how can I update all of my Apple products. I want to use them all.

Hello graingers45,
graingers45 wrote:
have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone, but I only have my one computer, how can I update all of my Apple products. I want to use them all.
What do you mean it isn't' compatible? What isn't compatible?
There is no limit to the number of iPods you can sync to one computer, iTunes library, or iTunes account. Simply connect each separate iPod/iPhone to your computer and configure each to sync whatever content you wish to.
B-rock

I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

I thought yes, more like this on the right says no. Why not take the two devices outside and try.

Does the iPhone support "Disk Use"

Does the iPhone support "Disk Use" like the iPod?

You can purchase a Mac Mini for $600. Connect your existing monitor, keyboard, and mouse to it and you have a Mac that includes a CD/DVD drive.
If not, once you factor in the same hardware doing a side by side comparison with a PC box assembler, a Mac is not as expensive or more expensive as you might think. Take out needing to purchase anti-virus, anti-spyware and anti-adware software and the associated annual renewal cost, along with access to software included on a Mac that probably requires an additional purchase with a PC such as iLife, and the cost difference is decreased.
That and the ability to run Windows natively on a Mac if needed or wanted, and you basically have two computers for the price of one. The cost comes down even more with this factored in.

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
Frank

Thanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?

I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?
Other info is available:
Superdrive MFG date: Sept 2009
Model: DVR-118LBK DVD-R/RW Writer Unit
My Macbook is: Mid-2010, running Mavericks
Thanks in advance, God bless!

That's a nice Pioneer DVD±RW drive - and an upgraded replacement for the original optical drive that shipped with that G5. For a finished look, you'd want to install it in an external enclosure for 5.25" IDE/ATAPI drives that converts it to USB connectivity. Because SATA optical drives have replaced ATAPI drives in recent years, the selection is getting more limited for a new enclosure, although used ones can undoubtedly be found at ebay. Here's an example of one, although it only features USB connectivity. You can also find enclosures that have both FireWire and USB connectivity, which for Mac users is beneficial. Booting the computer (if needed) by a FireWire-connected device is generally more reliable than USB booting. If this isn't important to you, then a USB-only enclosure would be adequate. The enclosure will have directions, but essentially all you need to do is plug in the power cable and data ribbon cable and then secure the drive to the bottom plate of the enclosure with the included machine screws.

HT4557 question! do you have to actually be at home, like using the same wi-fi network as the computer? or can you stream this music from somewhere else? and does the computer need to be one?

for example, can you be using another wi-fi network, for example in another country? and still stream music from my mac to ipad for free? and does the mac have to be on?

You could use something like Splashtop Remote Desktop on your Mac and iPad. This streams your Mac's desktop to your iPad so you can have full access to everything on your Mac anywhere in the world, as long as your Mac is turned on and connected to a network and your iPad has a data connection. It can stream full audio and video from your Mac. It is not exactly home sharing but it does what you want fairly well, with the added bonus of being able to use your Mac from anywhere. Search for Splashtop on the App store for more information. It normally sells for around $10 but is frequently on sale for as low as 99c, so have a look and see if it's for you while you wait for it to go on sale. I can confirm this works as I use it daily to work on my Mac from my iPad while at work.

How do I know if I have an extended warranty? I purchased Now 9, 2011 almost 2 years. I dropped it this morning and broke the screen. I want to replace it, do I still get a new one?

how do I know if I have an extended warranty? I purchased Now 9, 2011 almost 2 years. I dropped it this morning and broke the screen. I want to replace it, do I still get a new one?

hudsonclub wrote:
how do I know if I have an extended warranty?
Enter your iPad's serial number in the following page: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Your warranty and service options will appear. If you purchased AppleCare+ (AppleCare Plus) you may be in luck.
If you do not know its serial number you can find it stored in your last iTunes backup:
Open iTunes on the computer you used to sync the iPad and select Preferences…from the iTunes menu. (In Windows, choose Edit > Preferences.)
Select the Devices pane. Position the cursor over any of its backups. The iPad's serial number will appear in a popup window.
For a screenshot read: iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
Scroll down to:
Additional Information >
Getting the information from your computer >
If you have access to your computer, but not your device

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Here's the short-cut solution:
Green Apple tracks are MIDI files (so to speak). If you drag one from the loop browser (Capitol C Orchestral hit, as you mentioned in this exable) directly into the arrange page it creates the MIDI file and the instrument to play it back on.
HOWEVER.If you create and audio track first, THEN drag the green Apple loop onto that track, the loop will get "bounced" with the reverb in tact and you'll have the exact sound that you heard in the preview.
Make sense?

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

Similar Messages

Maybe you are looking for