I would like to connect my old TC to my  new TC in order to access the older files

I would like to connect my old 2TB TC to the new 3TB TC in order to access the old files. 

Plug old TC into new TC by ethernet.. reset it to factory and then do the setup again.. as bridged device. No files are lost from the hard disk doing this.
Whether Yosemite can find it is another question.. Yosemite is like the guy with two brains.. one lost and the other looking for it.. it has terrible network bugs.
Only way to find out if you are affected is give it a go.
Good luck.
Post back when you hit issues.

Similar Messages

  • I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup".

    I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup" to have all the other information I had from my other iPhone load up to my new iPhone. Hope you can help. What is the difference between "Backup" and "Restore Backup"; is all that different from synching.Thanks. Ana

    That's up to you. Do you want the data on your old phone on your new phone? If so, you follow the directions here:
    http://support.apple.com/kb/HT2109
    If you want to setup your new phone as a new device, then there is nothing you need to do.

  • I would like to connect my Ipad 2 wirelessly via 3G with a wireless rooter. The Ipad does not have a slot for a card, so it will have to connect to the rooter via bluetooth. Is this possible?

    I would like to connect my Ipad 2 wirelessly via 3G with a wireless rooter. The Ipad does not have a slot for a card, so it will have to connect to the rooter via bluetooth. Is this possible? If so, where can I buy such a rooter? Many thanks! Ina

    I'm not really understanding what you want. You mention all 3 types of connections: wireless, 3G and bluetooth, but I'm not clear on what you want to do. What the router is supposed to do, and why do you think it would need to connect via bluetooth?
    I'm thinking you want to buy a Mifi type device that will allow you to connect to a cellular network and then connect the iPad to that device via the Wifi network the Mifi produces.
    Is that so?

  • Hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

    hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

    Soory, no, it is not possible. You can only combine multiple copies of the same book into one order.
    Regards
    Léonie

  • HT4972 i would like to replace my old ipod with this new 4th gen, for my entire library, how to?

    i just bought a  4th generation ipod touch, to replace my 1st generation ipod touch and would like to register it so i can have access
    to my entire library , can anybody tell me how to do this?

    Make one final sync of the old iPod to your computer. The first step of the sync is a backup.
    Then connect the iPod to the computer and restore it from the backup for the old iPod. You will have to reenter keychain items like passwords since they are only restored to the same device.
    To restore see:
    iTunes: Backing up, updating, and restoring iOS software
    The restore topic of:
    iOS: How to back up

  • I created 2 iCloud accounts but I would like to remove my old one from my apple ID in order to add my new one

    I have had the same apple ID for years but I had to change my emails around including my iCloud, I wasn't entirely sure how to do this at first so I just set up a new apple ID with the new iCloud email address that I wanted. When I realised how difficult it was going to be to transfer my data onto the new account, I decided to stick with my old apple ID but change the email. The only issue is it is associated with the iCloud/Me email addresses that I no longer wish to use. Is there anyway to remove them from my current account and use my newest iCloud email address instead? Or at the very least create another one to link to my original apple ID? Sorry if this is a bit of a mess, I've been trying for hours and I'm so confused...

    I have this problem also.  If you get an answer will you please share it with me.  Thanks

  • I just purchased a Mac book pro and set up a new Apple ID with it. I already have Mac desktop computer with the original account my family has opened. I would like to transfer our old purchases to my new account, but we already have 5 devices authorized.

    I just got a new Mac Book for college and I created my own apple id for it. My family already has a shared account and I was hoping to transfer the purchases from that account onto my new account. I tried the Homesharing feature, but we already have 5 devices that were authorized and we can't add another. What is the best way to make the transfer work?

    You are most welcome
    Each post should have the text "this helped me" or "this solved my question," or something similar. Just click on whichever one applies to that particular post!
    This tutorial has more info.
    ~Lyssa

  • I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions? Thanks

    I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?

    What do you mean by "HD to VGA adapter converter"?
    Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
    Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
    In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
    You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
    http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
    Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work

  • Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard?

    Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard installation or just get acces to the phone. There is no SIM card in the phone.

    Hi Lawrence,
    Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´   Those were good days..... What a City

  • I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network.

    I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network. I can't get them to communicate. Any ideas?

    You need to use the airport utility on a computer.
    If you use v6 utility it is fairly easy and straight forward.
    The trick is to place the old TC in the same room as the new one.
    Do a full factory reset and then you can just go through the utility to extend wireless network.
    I did one post with all the pictures.
    https://discussions.apple.com/message/24161378#24161378
    If you have issues just ask.
    Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
    You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
    This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
    Tell us if you mean roaming not wireless extend.

  • I have a TC which is connected wirelessly to my router.  I would like to connect a mac in another location via ethernet to the TC.  I can't seem to get it to connect.  Am I missing something?

    I have a virgin Superhub which serves my wireless needs throughout the house.  I have a Timecapsule which connects wirelessly to the router with no issues.  I can backup my MBP over wireless easily.  I have now got another machine in a different part of the house that I would like to connect to the network.  It doesn't have wireless so ethernet is the only option.  I have a number of options 1) run cabling - not really possible  2) buy a powerline network system or 3) use the timecapsule to connect to the network/internet. 
    I like option 3 because
    (a) - I don't have to spend any more money and
    (b) - my wife wont complain about cables also see (a)
    Should using mixed wifi and ethernet clients on a timecapsule work?  if so is it a feature I can use out of the box so to speak?
    Thanks

    Should using mixed wifi and ethernet clients on a timecapsule work?  if so is it a feature I can use out of the box so to speak?
    Thanks
    No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
    Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.)

  • I installed the latest version of Firefox and it opens to google. I would like to use my old Sbcyahoo home page as the default page. How do I change

    I installed the latest version of Firefox. The home page is now a google search box. I would like to use my old sbcyahoo desktop with its icons. I am unable to make the change.

    Oops. I could have been more clear, sorry.
    TOOLS > OPTIONS > GENERAL tab
    Under Start-up at the top of GENERAL, you have an option to type in the url or use the tabs to set your homepage to the current page.
    Go to your chosen site, open OPTIONS and click 'Use current page.'
    Sorry for the shorthand version previously. I blame the cat.

  • I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

    I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

    Thank you for the answer, I suppose the main thrust of my enquiry is to find out if 65 MBits is my ATV theoretical limit of reception.  If that is the case then I am happy as a Pig in Mud
    I may have allowed myself to become a victim by listening to Fanbois posting elsewhere who always seem to go one better than everyone else. Now I have learnt two things Today; 65Mbit/s = Good enough and only read the apple forums.
    Many Thanks
    Nick

  • I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overal performance?

    I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?

    The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
    For details see the store's web page on the Dual-Link display adapter.

  • Can i use itunes to sync my iphone with another iphone. Both phones are iphone 4, I would like to recreate my old phone in my one. in other words; transfer my pictures, texts, contacts, notes ect onto my newer phone.

    hi, I have 2 iPhone 4 and i would like to transfer all of my documents and data, contacts, apps ect ect from my old phone to my new iPhone 4.
    Essentialy I would like to recreate my old phone on the new one. (older phone is scratched). I have a different phone number, and different i tunes account associated with each phone but I have no problem with changing the i tunes account on the new phone back to the account I had on the old one.
    I have done back ups in the past of my old phone, using i tunes and I would like to apply the backed up information to my new phone. How would I do this?
    Can I restore device A onto device B?  Also wondering what sort of information or files might not transfer?
    Thanks!

    The following link has instructions on how to transfer to a new device using iTunes (see the section below the "Use iCloud backup" section: http://support.apple.com/kb/HT2109

Maybe you are looking for

  • How to connect my PS3 to my iMac (Late 2012)

    Hello every one, I have a question. Can I connect my PS3 to my late 2012 iMac with 27 inch over HDMI? I looked in the internet but I only found such Adapters, for the older iMac's. If I can do this, please let me know what I need and where I could ge

  • Critical error: HP LaserJet 100 color MFP M175 Series - Please give me a solution to this problem.

    I am having a problem trying to install a new printer. As an administrator on a active directory domain on a Windows XP machine; when I go to install the software on the HP LaserJet Pro 100 Color MFP M175nw CD with serial number CE866-60105 v1.1, the

  • Can't get demo to work

    After installing the XSQL servlet I cannot get the demos to work properly. This is the message I get in the "Airportcode validation": Response from HTTP Request for airport.xsql?airport=got - <xsql:query xmlns:xsql="urn:oracle-xsql" connection="demo"

  • ITunes Ratings Not Working

    I'm hoping that someone can help me troubleshoot and fix this issue. It appears that my iTunes ratings aren't working. I first noticed the issue when I went to create a smart playlist based upon my My Rating. Where the stars should display I have a b

  • Save Message as Mime problem

    I would like to save the current message as Mime from within code. I have tried using the ItemSaveMessage() Token, but keep getting an invalid parameter error. Do you have any ideas on what could be causing this, I have tried many different ways and