I would like to format my printable into 8x10 so when I save it as a png it will be 8x10

Saflo33 you have posted to the Creative Cloud forum. Which Adobe software or service is your inquiry in relation too? I would recommend posting your inquiry to the forum specific to that software title. You can find a list of the available forums at http://forums.adobe.com/index.jspa?promoid=JZEFM.

Similar Messages

I would like to format cells with time only. when I enter a time of day the current date is still in the cell which is not necessarily so

I would like to format cells with time only. when I enter a time of day the current date is still in the cell which is not necessarily so. THere are no options for just date .

christine275 wrote:
... (this is a time worked by date and not always entered on the date worked)--
"Time" in Numbers is always "Time of Day", and is always part of a Date and Time value. "Amount of Time" is a Duration value, which may be displayed in a similar format to "Time of Day," but is a different type of value.
If you are entering the number of hours and minutes worked, format the column as Duration, set the units and the format in which you want to have the value appear.
The Date column will still contain a Date and Time value (Jan 1, 2011 00:00:00 in the cell shown in the example), but the "Time Worked" cells will contain only a Duration value.
Incidently, the Date in A2 was entered as "jan 1" (without the quotes). Numbers automatically adds the current year and the default time value, then displays the result in the closest format to what you've entered, or in the Date and Time format you have chosen.
The Duration value in B2 was entered as 3:15 (as displayed). Note that in the entry bar the duration is displayed as 3h 15m, probably to distinguish it from a similarly formatted (Date and) Time value.
Regards,
Barry

I am a teacher and I would like to format my page in PAGES to have lines...similar to that of lined paper. Is this possible?

I am a teacher and I would like to format my page in PAGES to have lines...similar to that of lined paper. Is this possible?

Hi Jay,
I've played with this before, but I was never happy with the result. I gave it another shot to answer your question, and I'm pretty pleased with this result. I'll say that you have a lot of latitude for adjustments in this template, so don't take it as being restrictive to what I'm illustrating. For instance, you can easily vary the line spacing, the weight of the lines, the color, etc.
In this example, the pitch of the lines is 32 points per line, blue stroke, and I placed a light yellow shape in the background. Here's the approach...
Open a blank Word Processing Template.
View > Show Layout.
Pages Preferences > Rulers > Ruler Units: Points.
Insert > Table.
Set the Table to 1-column, 0 Header Rows, and Footer Rows, Row Height = 32 points.
In the Wrap Inspector, set the table to Floating, and Does NOT cause Wrap.
Align the Top Left of the Table with the top Left of the Text Area.
Increase the Column Width until the single column extends all the way across the Text Area.
Increase the number of Rows until the table just fills the vertical Text Area of the page layout, plus one row..
Set the Outside Cell Borders to None.
Set the Mid Horizontal borders to Blue.
With the entire Table Selected, Arrange > Send Object to Background. Format >Advanced > Move Objects to Section Master, Arrange > Lock
If you want the colored background, Insert > Object > Rectangle. Graphics Inspector > Stroke > None. Color > your choice.
Stretch the Shape to cover the entire page size. Arrange > Send Object to Background. Format > Advanced > Send Objects to Section Master.
If the colored object is obscuring the lines, then: Arrange > Send Backward. In either case, Arrange > Lock.
Paste a good size paragraph (several lines) into the document.
Select the text. In the Text Inspector, set line spacing to Exactly and 32 Points.
Inspect the alignment of the Text and the Lines. If you are not pleased, Select the Table and bump it up or down with the vertical Arrow keys.
If you are satisfied, with the overall effect, Select all the Text and Type: Click here and enter text. Select the text "Click here and enter text." and Format > Advanced > Define as Placeholder Text. Lastly, File > Save as Template.
As I mentioned at the outset, you can easily modify these instructions to increase or decrease the number of lines per page, the type size, etc.
If you want to email me, I'll send you a copy of the template I displayed here.
Regards,
Jerry

HT2589 I have two Apple ID accounts, with which I purchase music, I would like to consolidate those accounts into one, how can I do it?

I have two Apple ID accounts, with which I purchase music, I would like to consolidate those accounts into one, how can I do it?

Stop using one. Everything you've previously purchased from it has that Apple ID stored inside the file, which can't be changed.
(66245)

How do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

how do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve

I have just purchased a new desk top. Would like to get my itunes into my new computer. I have downloaded it into my new computer, but how do I get the tunes I have from my other computer into this itunes in my new computer? Thanks

I have just purchased a new desk top. I would like to get my itunes into my new computer. I have downloaded the itunes program. How do I transfer the tunes I have in my itunes account into this computer? I know I have done it before, but can't seem to find how to do it. Thanks.

iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.

Running Illustrator on CS4. Would like to insert photo image into body of type. Would appreciate any guidance. Thank you

Running Illustrator on CS4. Would like to insert photo image into body of type. Would appreciate any guidance. Thank you

Use a clipping mask.
Illustrator Help | Clipping masks

To whom it may concern I would like to inform you about an error occurred when I upgraded my firmware to IOS 6 When I plug a headphone/earphone into my, then unplug it, the volume turned out to be unadjustable I have attached 2 screenshots of the error, p

To whom it may concern
I would like to inform you about an error occurred when I upgraded my firmware to IOS 6
When I plug a headphone/earphone into my, then unplug it, the volume turned out to be unadjustable
I have attached 2 screenshots of the error, pls help?
Thanks.

Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns

I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns - the first containing the name, the second containing the email address and the third containing the 'yes' or 'no'.
Can you help me ?

The question that needs to be answered is what is separating the columns? Is it a single tab, one or more tabs, spaces, or what? Or is it the brackets that makes the separation between the three pieces of data?
If it is always a single tab, that makes it really easy. All you have to do is find/replace the brackets with nothing (as Wayne said)
If it might be multiple tabs, you can find/replace tab-tab with a single tab and repeat that a few times until no more double-tabs are found.
If it is one or multiple spaces, that might be difficult. I'll think about this one if this is what you have. I'll ignore this possiblility for now.
If it is the brackets separating the three pieces of data, you would Find/Replace the left bracket with a tab then do the same with the right bracket.

I would like to format the external hard disk. I would like to use it in Mac as well as in Windows. What format should I do, connect to Macbook Pro? MS-DOS (FAT) or ExFAT ?

I would like to format the external hard disk. I need to use it in Mac as well as in Windows. What format should I do, connect to Macbook Pro? MS-DOS (FAT) or ExFAT ?

success1975 wrote:
Thanks
1) In 'ExFAT' format, is there a limitation on the file size?
Not one that will matter.
2) Is 'MAC OS Extended' format, only for MAC computers?
Yes, only for Mac
3) What are those (a) journaled (b) Encrypted & (c) Case-sensitive? or when to use those?
Again, only for Mac.

I would like set up my contacts into groups.

I would like set up my contacts into groups.
There seems to be no way to do this in either iOS or OSX. Android figured this out and I see no reason why Apple can't give us the capability to group medical contacts for example into an easily accessible group without having to resort to using Dr. as the first part of the last name in order to have them in a convenient group.
There are many posts that ask for this and Apple seems to have no desire to give us something useful in the entire spectrum of software while fiddling around with watches etc.

In the Contacts app in OS X click the "+" at the bottom and choose New Group. Once groups are created just drag the entries into the group list on the left in the Contacts app. You may have to go to the Contacts View menu and click Show Groups.
You cannot create groups in iOS, or assign contacts to groups using the built-in Contacts app. However, there are several 3rd party apps that allow you to move contacts among groups. I use Speed Names, but there are several others that people have told me are easier to use.

HT4007 I have multiple libraries. I would like to import one project into another library. How?

I have multiple libraries. I would like to import one project into another library. How?

Select the project in the Library Inspector and export the project as library. Then import this library into your other Aperture library.
File > Export > Project as New Library
File > Import > Library
Regards
Léonie

Scanning files and would like to Import one file into another.

I am scanning pages of a book and saving them individually onto a USB Flash Drive. I would like to put page two into the same file as page one. How di I accomplish this task?

Or by using the CreatePDF service.

I would like to create a pop-up window appear from Labview Interface. In this window, I will have a slide control and an image taken from a camera. The main VI have to run while pop-up window is open. How can I do ?

When I pushed a button, this pop-up window has to appear. There will be a slide control and a picture from a camera in this window. Is it possible to make appear this windows while main VI Interface continue to run ? How can I do this ? Thank you for your answers.
Cyril.

Here you go. This is simple example. Maybe not the best way, I am just
beginner in LV and still not comfortable with data flow that much. I prefer
events, so I would change this to use Event Structures.
When you click on OK button on SliderMain, it opens Slider.vi. Now both
windows are open and you can interact with both. Now if you click on OK
again with Slider.vi open, you run into problems. Only thing I did was
change VI properties of slider.vi, mainly window appearance.
vishi
"Cy" wrote in message
news:[email protected]..
> I would like to create a pop-up window appear from Labview Interface.
> In this window, I will have a slide control and an image taken from a
> camera. The main VI hav
e to run while pop-up window is open. How can I
> do ?
>
> When I pushed a button, this pop-up window has to appear. There will
> be a slide control and a picture from a camera in this window. Is it
> possible to make appear this windows while main VI Interface continue
> to run ? How can I do this ? Thank you for your answers.
> Cyril.
[Attachment SliderMain.vi, see below]
[Attachment Slider.vi, see below]
Attachments:
SliderMain.vi ‏16 KB
Slider.vi ‏11 KB

My ipod touch is currently running ios 4.2.1 I would like to run ios 5 or 6. When I try to update it on itunes, it tells me my software is up to date. Is there another way to upgrade the IOS?

My ipod touch is currently running ios 4.2.1 I would like to run ios 5 or 6. When I try to update it on itunes, it tells me my software is up to date. Is there another way to upgrade the IOS? Do I have to go to Settings>General>reset>Erase all content and settings before I can get the newer ios? If this is the case, how can I ensure all my content is backed up prior to erasing it all. Is there anyway to check to ensure the backup is complete and comprehensive? THanks!

A second generation iPod touch can't be updated past 4.2.1.
(88824)

I would like to format my printable into 8x10 so when I save it as a png it will be 8x10

Similar Messages

Maybe you are looking for