I would like to see if my time capsule has been successfully with, pictures, music, files from my mac

Hi Guys,
I stall my my time capsule and the wifi is working quite well.
My problem is that I am not sure if my files, pictures and musics has been sync and safe.
How could see it?
Thanks

http://pondini.org/TM/8.html
and http://pondini.org/TM/7.html
http://pondini.org/TM/FAQ.html

Similar Messages

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network.

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network. I can't get them to communicate. Any ideas?

You need to use the airport utility on a computer.
If you use v6 utility it is fairly easy and straight forward.
The trick is to place the old TC in the same room as the new one.
Do a full factory reset and then you can just go through the utility to extend wireless network.
I did one post with all the pictures.
https://discussions.apple.com/message/24161378#24161378
If you have issues just ask.
Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
Tell us if you mean roaming not wireless extend.

HT5318 Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive. What do I do to get rid of the Malware?

Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive. What do I do to get rid of the Malware?

First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas Nowak

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

Hi.. I'm new to mac, I've got a mac book air and time capsule is it possible to save music,video from iTunes Store directly to time capsule leaving my 128GB Mac free? If so please help..

Hi.. I'm new to mac, I've got a mac book air and time capsule is it possible to save music,video from iTunes Store directly to time capsule leaving my 128GB Mac free? If so please help..

You can move your iTunes library.. Apple have explicit instructions to do it. If the library is moved to the TC and accessed over wireless, the efficiency of the whole system will drop dramatically..
A file you download goes.. Modem---TC--Laptop--Back to TC--Store on disk. Double looping the wireless slows it dramatically..
As far as using TC for your iTunes.. you CAN.. but SHOULD YOU?
Store files on the TC.
https://discussions.apple.com/message/24380694#24380694
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great.
3. The drive is slow to spin up and quick to spin down.. there is no controls.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

My time capsule has been "preparing" for days--what to do???

My time capsule has been "preparing" for days--what to do???

See # D1 in Pondini's excellent Time Machine - Troubleshooting guide.
http://web.me.com/pondini/Time_Machine/Troubleshooting.html

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after saving as from word 2007 - I uninstalled Pro X1 and now when I save as from word 2007 to PDF it will

Can anyone help with this - do I have to uninstall Reader and then reinstall?

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after "saving as" from word 2007 - I uninstalled Pro X1 and now when I "save as" PDF from word 2007 to PDF it will save the document as a PDF but will not open the document to display after publishing - I have to got to where the file has been saved to view the new PDF document - this is really annoying - do I have to delete adobe reader and reinstall it - adobe needs to look at this conflict with acrobat pro as I have even gone it to properties and tried to have adobe reader as the default PDF program - the main issue is that I cannot view the PDF after publishing it from word 2007

HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

abailey46 wrote:
My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
Sorry we are unclear as to the external hard drive and its connection to the TC..
For instance the light that blinks.. is that the TC or external hard disk or what.
Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
Are you actually running Snow Leopard as the profile states?
How old is the TC?

I would like to see and be able to answer my texts on my new Ipad from my android phone. Possible?

My clients often text me on my Android phone and cell#. I would like to be able to text them from my Ipad, from the same phone# as my Android and receive them there as well. If that isn't possible, is there a way to 'copy' my texts from my Android to my Ipad so that at least I can see them and respond from my Ipad?
Thank you for any help,
Jeannette

iMessage only works with Apple's iDevices.
However, check out TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

I recently had my comcast cable box upgraded to a wireless router/modem. I have terrible signal so I would like to install an Apple Time Capsule. How do I install it?

I Have comcast cable in my home. It comes into my basement. Recently comcast upgraded our boxes to a wireless router/modem unit. We now have a poor wireless network. I decided to run an ethernet cable up into my kitchen so I can place a time capsule there. Is it as easy as just plugging the ethernet cable into the back of the time capsule or do I have reconfigure everything?

Plug in the Ethernet cord, turn the Time Capsule on, then go Applications/Utilities/Airport Utility and you can configure the wireless there.

Airport Time capsule has been making its first back up for 3 days and still going

Been having problems with airport time capsule (its a 2TB model my iMac is 1TB), when first used it backed up OK then wouldn't back up after a few months operation. Spoke to support on Thursday 3 days ago, they got me to delete disc from airport utility and had me check all my connections were correct then started a new first backup again.
All seemed to be ok as it showed there were 840 gb to back up. so slowly this reduced friday night to 300 gb remaining. Then Saturday it showed 150 GB of 350 GB now today it is showing 485 Gb of 534 GB but as the target figure keeps increasing just checked now it shows 535 GB!
I have entered time machine to see what is there and all file seem to have copied across but haven't checked then individually. There is only one TM folder saying Today now, so it is still on the first back up.
The other strange thing the available space on the TC is now showing 864 GB free of 2TB how can this be if my imac has only 1TB!

If you still have issues.. and you well might.. i recommend you start over..
Unplug the TC from the network and plug it by ethernet into the computer..
Do factory reset of the TC.. and do a simple setup.. leave it in router mode.. ignore all the problems.
Make absolutely sure ipv6 is set to link-local only for ethernet.
Turn wireless right off.. and start the backup again.. It might even be worth erasing the TC and start over.. It can do 60GB/hr by ethernet.. so should do the disk in around 12-15 hours. although to be generous it can take a long time when it does loads of small files.
Still got issues then tell us exactly what TC model it is.

Time capsule has been disconnected when move files

I have a home network with a imac and a samsung ultrabook with windows7, and always when i try to move any bigger file from the time capsule to the ultrabook the network crashes, than i have to reconfigure the network adapter. What could i do to solve this problem?
P.S. with the imac everything works perfectly.

If it is intel wireless, try different version..latest might not be the best but worth a try.. download direct from intel.
I don't know how the major manufacturer of wireless chips has so much trouble but Intel cards seem to be the number 1 for these issues.

How can I transfer my i tunes account from my PC to my family computer (Macbook)? My husbands account is already there but we would like to see both accounts on the same computer.

how can I transfer my i tunes account from my PC to my family computer (Macbook)? My husbands account is already there but we would like to see both accounts on the same computer.

Copy the whole iTunes folder from the My Music directory to the Music folder in the Home directory on the Mac.
The easiest way to do this is to create another user with the second library.
If you want both libraries on the same user account then you will need to choose which library iTunes opens everytime you launch (hold down the OPTION key while launching) it as itunes can only read one library at a time. If you do not choose on launch it will open the last library it was connected to. You will also need to rename the iTunes folder when you move it (eg: iTunes2) because your husband's library will already be in the Music directory in a folder named iTunes.
You can also leave your library on the PC and turn on Home Sharing. As long as you leave the PC running with iTunes open, you will be able to access it from any Mac, Apple TV or iOS devices on the network that is signed in to Home Sharing with the same Apple ID.

Airport Time Capsule has no IP address

I just moved to Massachusetts and the Comcast technician who installed my tv/phone/internet package did not install my time capsule properly, or so it seems. He said he would use a standard protocol for installing it but was not sure it would work. It didn't, and the orange light on the front of the time capsule has been flashing now for 48 hours. Also, through Airport Utility I learn it "has no IP address". I might mention the Bright House technician in Palm Coast (FL) and in the AT&T technician in Jacksonville had no trouble getting it to work
I hasten to add this may not be Comcast's fault. I dropped the time capsule from 3 feet onto the floor as I was taking it out of its box. I would be most grateful, assuming it survived the fall, if anyone could suggest how I might get it to work.
Regards.

Reset it to factory and start again.
Make sure it is plugged into the main ATT router by ethernet to its WAN port.. ie the one with the circle symbol. (always nearest the power socket).
Now use airport utility and try again.. the airport utility on iOS device is more reliable than Yosemite.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.

Time Capsule has suddenly gone "Read Only"

My Time Capsule has suddenly decided to stop backing up from my iMac, however the MacBook Pro still works fine with it. I get a message that it is now "Read only" - trying to reselect the drive has no effect.
Any ideas?

I've just had the same experience, suddenly discovering that my Time Machine volume on my external hard disk had become a read only volume.
I believe this discovery has something to do with the manner in which my external hard disk was recently shut down by my UPS backup master control mechanism. As a result of this inappropriate shut down, my Time Machine volume somehow became unmounted. That volume's icon remained on my desktop so the unmounting was a bit deceptive in that the volume appeared to remain mounted; that is, icon visible.
Not realizing this unmounting problem at first, I used Disk Utilities to discover whatever I might by repairing permissions and verifying that Time Machine volume. I didn't discover any untoward problems that way but I did notice from the Disk Utilities window that my Time Machine volume had somehow become unmounted.
Now the funny thing was that the Disk Utilities icon for mounting/unmounting a selected volume appeared to be stuck in the unmount option even though the wording showing at the bottom of the Disk Utilities window clearly showed that my volume was already unmounted. (Apparently Disk Utilities can become conflicted.)
So, I simply clicked on that unmount icon. My Time Machine volume then disappeared from my desk top as expected. Next, I clicked on the newly named mount icon and my Time Machine volume icon reappeared on my desktop as expected.
Then I used my Time Machine menu to prompt a back up now. Everything is now working fine once more.
If you're having sudden read only Time Machine volume issues, try the above approach. You might like it. (Let us know of your results, too.)

I would like to see if my time capsule has been successfully with, pictures, music, files from my mac

Similar Messages

Maybe you are looking for