I would like to upgrade my macbook with a new hard 500 GB 2.5 inch with a serial (data) connector hard drive

are they avalable as lion takes up to much space on the hard drive ?

They're available
From Newegg http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007605%2060003059 4&IsNodeId=1&name=500GB
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Or you can get an SSD but they'll run you around $800
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100008120%2060003849 1&IsNodeId=1&name=512GB
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100008120%2060003850 2&IsNodeId=1&name=480GB

Similar Messages

I would like to upgrade my macbook from 10.6.8 to Mountain lion. however, the app store said that my macbook isn't compatible with the mountain lion . Why can't I update it to mountain lion? and How can I upgrade it to a newer version ?

I would like to upgrade my macbook from 10.6.8 (Snow Leopard) to Mountain Lion. However, app store said that my macbook is not compatible with Mountain Lion? Why can't I upgrade my macbook to mountain lion? And How can I upgrade my macbk to a newer version such that I can download the newest version of imovie?
Here r the system info of my macbook:
Mac oS X (version 10.6.8)
Processor :2.2 GHz Intel Core 2 Duo
Memory: 2 GB 667 MHz DDR2 SDRAM
Model Identifier: Macbook 3,1
I

Requirements for Mountain Lion:
http://www.apple.com/osx/specs/

I need to upgrade my MacBook 13" white 2008 hard drive. I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

I need to upgrade my MacBook 13" white 2008 hard drive. I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

I had a 640GB HDD in my Early 2008 Macbook and it was just too much it would always freeze up the computer a bit for only a few seconds but ya. Then I realized that it was the size of the HDD that was causing it since the Early 2008 Macbook models can only handle a MAX od 500GB while the Early 2008 Macbook Pros could have a MAX of 640GB (Lucked out there!) lol But ya the Early 2008 Mocbooks can only handle a MAX HDD size of 500GB and that's it!! lol

Due to a slow ISP I would like to download and save tutorials on my hard drive, is this possible?

hI, I would like to download and save tutorials on my hard drive is this possible and ow do I do it?
My ISP Is very slow and Adobe TV does not work. 30 minutes tryingto open a single tutorial and nothing.

Not with iPhoto.
You can relocate the masters using Aperture if you're using the latest versions of both iPhoto and Aperture. However, if you're planning on using iPhoto going forward having the masters on one disk and the Library on another is not a good idea. Have a read of this
https://discussions.apple.com/thread/3062728?tstart=0

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

I would like to upgrade my Macbook Pro Model A1278.

Hi,
I would like to upgrade RAM and hard drive memory on my Macbook Pro Model A1278, but I'm not sure what is the maximum RAM I can install and what is the maximum hard drive memory I can install if its even doable. Also, which are the parts I should buy to upgrade the RAM and hard drive memory (if its doable).
Currently my macbook runs a 2.26GHz Intel Core 2 Duo processor; 3 MB shared level 2 cache, 2GB of 1066MHz DDR3 SDRAM, 160GB 5400-rpm hard drive, its a 13'' laptop, NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory, it currently has MAC OS X version 10.6.8.
Thanks for the help in advance!

Maximum Memory
8.0 GB
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
The largest hard drive you can install is a 1.5 TB drive from Hitachi (HGST.)
You can find memory at OWC, DataMem, or Crucial.com. OWC also sells suitable hard drives, toolkits, and online tutorials.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

I would like to upgrade my macbook pro model 5.1 (yosemite) to a Crucial 500 gb ssd drive, but I am hearing horror stories about ssd and yosemite conflicts, now what???

Newbie here...I would like to upgrade my HDD to a Crucial or similar 500 gb SSD. I am hearing that there are conflicts with SSD's and the Yosemite OS, any help or advice would be welcomed. Macbook pro (5.1).
thanx
mellowfellow

Hi...Quick response.
I have been checking with other forums and various " how-to" groups about the upgrade. The concern is about using third party non-apple SSD's and only Yosemite and not Maverick or previous OS's. The SSD will eventually bog down because of the accumulating erased data and poor trash control, there are other issues involving security , and something about Trim enable and disable. I haven't tried anything nor bought an SSD yet, I am just concerned about screwing something up.

Need help with Macbook reinstall on new hard drive!

Hey Everyone!
So my old MacBook A1181 was damaged a bit in a fall from a shelf. I followed all the directions on PowermacMedic (bless them!) and put in a new LCD screen, as the old one was cracked. Cleaned a lot of cat hair out of machine while I was at it.
I also replaced the hard drive with a new one, because the old one had a question-mark-over-a-folder icon. I'm very proud of myself, as there are only four screws left over. LOL!
So now it's time to reinstall the Tiger system. The optical drive is not working, so I researched on how to make an external hard drive bootable, put the Tiger Installation on that and connected it via FireWire to the old MacBook.
Turned it on and pressed Alt/Option at the same time. Great...up popped the Tiger Installation information. I've clicked on Install, etc., and am at the point where I need to choose a destination drive. Except there is none listed.
I've gone to Disk Utility, and I can see the new drive there, but just the icon as the major piece of hardware...there's no sub-icon for it underneath, like there usually is.
So, any ideas on how to make my new hard drive readable so I can choose it from the Tiger Installer?
Any help would be much appreciated. I've never even attempted to do something like this before, and I don't want to give up just yet!
Jenny

Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After the formatting has completed quit DU and return to the installer. Install OS X.

MacBook Pro 2009 new hard drive install results in very slow function and freezing

I just wanted to post my resolution to a problem that I had trouble finding an answer to on these forums.
Short version:
I replaced the hard drive in my 2009 MacBook Pro because the computer froze and upon reboot the Disk Utility said it was corrupted, but with the new hard drive the computer ran very slowly and often showed the spinning rainbow wheel. I replaced the SATA cable that connects the hard drive to the motherboard and it works perfectly once again.
Long version:
Recently my MacBook Pro (2009 running Snow Leopard) froze up and I performed a hard reset by holding down the power button. When I turned the computer back on it would not boot OS so I ran disk utility from the Snow Leopard install DVD. The test said the hard drive was corrupted, and since the computer is way past warranty I decided to change the drive out myself. I bought a 500GB Seagate Momentus 5400 Drive from Amazon, opened the computer and replaced the existing hard drive with the new one. When I first booted from the OS install DVD, my computer was not recognizing that any hard drive was present. I read somewhere on these forums that sometimes the formatting on new Seagate drives can't be read by MacBooks and they need to be reformatted using another computer, but I tried simply taking the hard drive out and putting it back in a couple of times thinking maybe I had just not plugged it in correctly. After the 4th attempt the hard drive magically showed up, and I was able to reformat the drive and install OS and even Windows XP on bootcamp.
Everything seemed to be okay but applications were running slowly considering this was a fresh drive and OS install. Over time, the computer started to hang more and more. In OS I would get the spinning rainbow wheel even when doing something as simple as opening a browser window in Chrome or trying to type into a text field. When I tried to use Windows it would simply freeze after only a short time and I'd have to do a hard reset.
I went to the Genius Bar at the Apple store which was unhelpful, so I continued searching through these forums to try to figure out the problem. I noticed a lot of people had trouble with the SATA cable that came with the computer because it's quite thin and delicate, and would get damaged when changing out the hard drive. However most of these people seemed to experience a question mark when starting up the computer, whereas mine would fully boot and be functional for a time. I thought it unlikely that a damaged cable could possibly leave the computer partially functional. Finally though I gave in a dropped the $26 for a new SATA cable on Amazon. As soon as I installed it the problem was fixed, and the computer runs as fast as when I first bought it. I don't know if I damaged the cable changing the hard drive (I was extremely careful) or if my original hard drive was not actually corrupted and the cable was already damaged. I mentioned the possibility of the cable being damaged at the Apple store and the representative said that often times they fail because people carry the laptop with one hand, and because of the way this model was designed this puts a lot of pressure right on that thin cable. Regardless, if you do plan on changing out your hard drive in your MacBook keep in mind that the SATA cable is sensitive, and that if you experience problems with a fresh hard drive and OS install the SATA cable is a likely culprit.

If you think you have either a hard drive or a cable problem, to the best of my knowledge the only product that can help isolate both of them is Scannerz. You can check it out at:
http://scsc-online.com/Scannerz.html
I think that's the correct link. If it isn't and you're interested and that's wrong, just google it. I'd also check out their downloads section, especially the sort of short document on using path isolation to detect and isolate problems.
Scannerz can detect both errors and irregularities. It uses the surface scan progress as a reference. Cable problems never show up at the same location because they're typically intermittent. Surface problems always show up at the exact same place. That's the only product (at least commercially available) that can do that.
I don't know if this information is of any value to you because it sort of sounds like you've already solved the problem, but it might be of use if you have problems in the future.
In any case, I've seen several posts on several different sites where people were reporting insulation break down on some of the SATA cables. Apparently the insulation breaks down and the cable starts shorting to the case.

MacBook mc240ll/a new hard drive how to install os?

I just got a MacBook mc240ll/a it has 4GB of ram and I just got a new hard drive for it but, I have no clue how to install the OS. Do I have to purchase OSX 10.6 Snow Leopard because I have none of the cds that came with the computer. Thanks

Thanks for your help. I received the disc and installed the os but I had to use a flashlight because everything was dark. I finished the install and it is still dark is there any solution for this. I tried making the brightness up but, it does not work.

Macbook Not Recognising new Hard Drive.

Hello!
Macbook White 2006 Model. I replaced the original 60GB hard drive in 2008 for a 320GB HardDrive.
The 320GB failed two weeks ago and I have bought a replacement (Samsung HM641JI - 640GB).
When I install the new hard drive and boot using the Snow Leopard install DVD the macbook won't recongise the new hard drive as a location (I've tried new install and back up from time machine).
When I install the original 60GB hard drive the macbook boots no problem. I am using it to post this message.
Any ideas why it won't recognise the new drive?

Hi,
mots likely the new harddisk came preformated for use with Windows or even completely unformated.
In that case you cannot install OSX on it before 'preparing' the harddisk with Disk Utility.
After booting from the OSX install DVD Disk Utility can be found in the 'Utilities' in the Top Menu.
Run Disk Utility
In the left pane of it click on the internal harddisk (not any partitions on that harddisk)
In the right pane click on the Partition-Tab
Set it to one partition
Use 'MacOS Extended (Journaled)' as file system
click on the Options-button and set GPT (GUID Partition Table) as Partition scheme
Start the partitioning.
After that is done quit Disk Utility and you should be able to install OSX on the new harddisk.
Regards
Stefan

I would like to upgrade my Macbook Air with more Flash Memory from 128 gb to 512 gb. How can I do this?, I would like to upgrade my Macbook Air with more Flash Memory from 128 gb to 512 gb. How can I do this?

Hello
I recently purchased a Macbook Air with 1.7 Ghz Intel Core i5 4 gb Ram 11" with 128 Gb storage.
All is well but I would like to increase the storage in my Mac, to the maximum possible 512, 1 tb what ever possible.
I am in the Kingdom of Saudi Arabia right now. No Apple Stores exist here at the moment. But I have noticed several authorized resellers.
Kindly guide me if, first of all this is possible or not, if yes then how can I go about doing this being in the country (Jeddah, Saudi Arabia) that I am.
I also want to purchase an iMac, but the local shops don't seem to have stock and would like to inquire if I could order it online and have it delivered to my home/office here.
Thank you for your time.
Abdullah

You should go back to your Apple Reatiler Store since it is likely under warranty.
If'its not under warranty there e are a number of sites... here is one.
http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Air_2011
Personally I would sell the 128 and buy the one you need.
Cheers

My Macbook Pro was stolen, and I have replaced it with a Macbook Air. New hard drive is too small for a Time Machine restore. How do I restore my more-expensive apps (ie iWorks) on my new Macbook without repurchasing them?

My Macbook Pro was recently stolen, and I have replaced it with a Macbook Air. I attempted to simply do a restore from the Macbook Pro's Time Machine backup, but since the new Macbook Air's hard drive is significantly smaller, a Time Machine restore was not possible. I even tried to choose only settings or only my User Profile (option) when restoring, but the backup was still too large to do a restore onto the new machine. How do I restore my more-expensive apps (ie iWorks) onto my new Macbook without repurchasing them? Also, I reaad somewhere that if you went to the Mac App Store and attempted to repurchase the app and clicked BUY, it would simply alert you that you have already purchased the app (and trigger a re-download)... NOT THE CASE... So I just dropped another $19.99 for a second copy of Pages... Not my intention....
Any help would be greatly appreciated.
LM

you should get a usb backup drive as well. time machine has limited use in my eyes. it saves things. but older things can be errased ad space drops without telling you
nothing beats data redundancy. 2 saves is. 1. and 1 is none
im personally not fond of time machne though i use it only for a recovery parameter for a mac
id never ever myself consider time machine a genuine data backup tool. though most do consider it as such
drive clones such as superduper and carbon copy cloner can clone your entire drive for emergency recovery. and you can boot from them as well o. another mac

Would like some opinions re: best backup software/external hard drives for windows xp and windows 7

Recently tried to restore a corrupted hard drive with a Toshiba canvio hard drive with NTI Backup Now EZ I purchased in 2010. Was only able to restore a few files, had a very hard time working with the software, even contacted NTI, still not much luck. Am unhappy with the NTI software, and want to know what external hard drives and what software the community has used and would recommend for Windows XP and Windows 7? Thank you so much in advance for your time and opinions.
Solved!
Go to Solution.

It doesn't matter which external drive you use.
Let's talk about backing up the entire drive. Be sure to burn the disc that enables you to restore.
Windows XP does not have a decent image backup built-in. I understand this free one works well.
EaseUS Todo Backup Free
Windows 7 has a decent one.
Learn more about system image backup
Windows 8 contains the same backup. Open "Windows 7 File Recovery" (sdclt.exe).
-Jerry

I have been using my newly purchased Iphone for Iphonagraphy (Iphone photography). I would like to sync my Iphone to my external hard drive so I can move photos in and out of my Iphone, to make use of the apps I have exclusively on my phone.

I want to sync my Iphone with the external hard drive so I can move photos from my phone to the hard drive AND BACK! I'm using a Windows OS

You have several options:
Connect the phone using a cable to your computer. Use the camera and scanner wizard to import the photos from the Camera Roll, then organize them and sync them back to the Photos app (see: http://support.apple.com/kb/HT4083). the Camera Roll is intended for temporary storage only.
Save the images to your Dropbox account. It's free, http://www.dropbox.com. There's a Dropbox app for the iPhone, and also for Windows, Mac and Linux. Dropbox can also be accessed using a web browser. Dropbox (and similar services) provide cloud-based storage that can be accessed from anywhere.
Use Photo Stream
Email or text (MMS) the images to yourself
Create a Picasa or Shutterfly account, save the images to it, then download to your computer
I'm sure there are others.

I would like to upgrade my macbook with a new hard 500 GB 2.5 inch with a serial (data) connector hard drive

Similar Messages

Maybe you are looking for