I07 problems to the max!

I've contacted Apple with these problems and they keep telling me call me back tomorrow and I will let you know what we find out. Wel, a week later and nothing!
My problems are as the rest. No imessage or facetime at all. I keep getting the same message as everyone else. I've tried resetting my network as apple asked me to do but nothing. I've tried the power and home button and some have recommended and nothing.
Now, I can't listen to my music via bluetooth in my car. Can control the music at all. Want go forward or backwards to a song. I'm even having problems answering a call. What I mean by that is it doesn't want to swipe to answer a call. I have to try or 4 times.
There has to be something done!

Please post to www.apple.com/feedback/iphone

Similar Messages

A problem about the "Max running jobs". Thanks a million!

Hello everyone,
The "Max running jobs" was set to 15.
(1). When I dragged two assets into FCSvr at a time, in the "Search all jobs" window, I saw the first one being uploaded then transcoded, and later the second one being uploaded then transcoded.
(2). When I dragged them into FCSvr one by one, I saw them being uploaded, then the first one being transcoded, and the second one later.
Thus with (2), there is no need to wait or queue between the uploading of the second one and the transcoding of the first one.
However, I intend to drag the assets at the same time, besides, I wanna attain the aim in (2) that no queue to wait. Could someone tell me how to do it?
With best regards,
Steven Lee
PINZ Media

If I understand, you used for upload menu "Upload file..."
For uploading and conversation in same time many files you can setup production action (response) for some folder on your device (XSAN, RAID, HDD)
This action can create production for folder, and create assets for media in folder. The add action "SCAN" in response submenu. For transcoding many assets in same time check radio button "Background Analyze" in response "SCAN".
You can read more about that in manual.

Problems changing the max open files attribute (ulimit)

I realised that I posted this message in the wrong section
(newbie corner) but there is no way to delete a message
so this was a duplicate of the one in Kernel & Hardware
Issues
Last edited by Rehto (2009-04-06 08:53:52)

Rehto wrote:
I'm trying to change the max open files by
putting this line to /etc/security/limits.conf
<username> hard nofile 4096
but nothing changes ('ulimit -n' spits as 1024 as an answer).
I did try to logout and log back in and reboot the
system but no go
set the soft limits first. smth like:
<your_name> soft nofile 4096
<your_name> hard nofile 4096
ulimit always uses the soft resource limit first. hard limits kills the application then, if it goes mad.
vlad
ps: logout then login again...
Last edited by DonVla (2009-04-06 11:25:56)

[SOLVED] Problems changing the max open files attribute (ulimit)

I'm trying to change the max open files by
putting this line to /etc/security/limits.conf
<username> hard nofile 4096
but nothing changes ('ulimit -n' spits as 1024 as an answer).
I did try to logout and log back in and reboot the
system but no go
P.S. I also tried adding 'ulimit -n 4096' to ~/.bashrc
but then I get:
bash: ulimit: open files: cannot modify limit: Operation not permitted
so should I add it to the global profile file
(etc/profile right?) or to /root/.bashrc or what?
Last edited by Rehto (2009-04-06 12:08:32)

Rehto wrote:
I'm trying to change the max open files by
putting this line to /etc/security/limits.conf
<username> hard nofile 4096
but nothing changes ('ulimit -n' spits as 1024 as an answer).
I did try to logout and log back in and reboot the
system but no go
set the soft limits first. smth like:
<your_name> soft nofile 4096
<your_name> hard nofile 4096
ulimit always uses the soft resource limit first. hard limits kills the application then, if it goes mad.
vlad
ps: logout then login again...
Last edited by DonVla (2009-04-06 11:25:56)

RAID Problems to the Max

Hi.
I posted my problems about Apple Raid Card and Hard drives. Drives disappearing from the system and all that.
Everything started last friday when Raid Utility informed me that one of the 2Tb drives (lets call it 4(bay 4)) has disappeared from the system, and because of that, RaidSet 1 got degraded. First thing I did was that I ordered a new drive to replace the "broken" one. Yesterday the new drive arrived and I replaced it successfully to the system, and RaidSet 1 started to rebuild. Today, when I got to work, the working drive of the RaidSet 1 (lets call this one 3) had disappeared and the Raid Set 1 was totally broken.. Friday 13th eh.. It was working fine until around 12 am today.
Last backup I have is from last friday (thank god), but so much work has of course been done during the week. And I know the drive is not broken, neither of the 2 drives what have disappeared are broken, they just disappear and the Raid ejects them. Then I was on the phone with few consultants and I decided to head to my friends house and plug in the last working drive in his Mac Pro. The consultants told me that it should show the 2 volumes on that drive, and they were half right. One of the volumes appeared there, but it was only the volume with the user home folders. The 2nd volume where we have our work files, did not show. Whyyyyy!!?!?!? WHY GOD WHYYY!!??!!
Is there any trick I could try to get that one volume to show? As far as I can understand, mirrored drives should both have the 2 volumes, around 1tb each, because the drives are duplicates!? I started to think that maybe the drives are indeed totally from the depths of someones a-hole, and broken, but I cant believe it.
The whole Mac Pro is going to be sent to the company where we ordered it, I guess they will replace the Raid card. But I just would like to still try to secure the files myself.
Anyway. Happy friday the 13th.. Any comments and suggestions are appreciated.
- V

Please post to www.apple.com/feedback/iphone

Problems with the ipod

I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
I have seen other users referred to this artile.
http://docs.info.apple.com/article.html?artnum=301267
This documentation is pretty useless as it says that everything can be wrong.
So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
I have seen other users referred to this artile.
http://docs.info.apple.com/article.html?artnum=301267
This documentation is pretty useless as it says that everything can be wrong.
So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

HT4009 Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

You need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

IPhone 6, problems with volume, automatically goes to the max when listening to the music

iPhone 6 iOS 8.1, sometimes when I'm trying to increase volume by 1 bar, it goes to the max and there is no way to decrease it without reboot. Had same problem before updating to iOS 8.1... I've never had that problem with my 5S, which is also on iOS 8.1. I'm using Beats Mixr headphones with remote. I've tried to restore the phone, didn't helped.
Yesterday I was listening to the music on iPhone 6 for about 4 hours and this happened 5 times, today I listened music from iPhone 5S for almost 5 hours and it didn't happended even once... I was using the same headphones... Any ideas?
THanks in advance

My phone is not on mute, the volume is up to the max, there are no blue tooth connections, the phone will not ring only vibrate with the ringer on. I cannot hear any music through the phone either.

A webpage suddenly stops loading and just shows 'connecting...'. Opening new webpages in new tabs in the same window or in a new window gives same problem, while IE does not have any such problem opening the same page simultaneously

this issue is not limited to one website, it seems to be problem with the browser or possibly any plugins but not any specific webpage

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a setting like 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

HP Pavilion DV2700 Special Edition what is the max ram for this model laptop?

HP Pavilion DV2700 VERVE Special Edition
Operating System Windows Vista 64 bit Service Pack 2
Year made 2007
Processor AMD Turion 64 X2 TL- 60 2.0 GHz
Current Ram 4GB
would like to know what is the max ram
PS
Can i install and other Processor or is this and intergrated one with the motherboard.?
In Advance thank you for your time to look at my question
Indarktimes
This question was solved.
View Solution.

Hi
Please find the link given below for your model off unit Max Memory supported is 4GB.
http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06a/12139188-78299199-78299212-78299212-78299212-81135202....
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

What is the max. count of internal worker-threads in B1iSN 88?

Hi Experts,
We have an installation of B1iSN 88 with an ECC 6.0 and 54 SAP Business One installation. The Hardware is 8 Core multi-threads processor. 32GB Memory. Now we have a problem with the queuing of Events. What we have found is that the configuration of the internal worker-threads is set to -1(please see below for the settings). We change the settings to xcl.threads=20 and it improves the queuing. My question is what is the max. count of internal worker-threads per core? so that we can know how many worker will set and if we need to upgrade the CPU to 16 Core..
# The max. count of internal worker-threads afforded for the internal Scheduler (defaults to 1)
# The value of 0 means that there is no limit (what in general should not be set up).
# A negative value means the count of threads per available processor
xcl.threads=-1
Regards,
Wilson

You're very welcome.
Yes, they are very nice machines.
What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
The downside of that model is that there are no settings for ahci or raid.
I own or have owned every CMT since the d510 with the exception of the dc7900.
My main PC is now the 8200 Elite CMT which I installed W8.1 on.
It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
I threw in a Radeon HD 6670 in that one.
Best Regards,
Paul

What is the max size of HDD I can use in my dc7600 CMT

I am using an HP dc7600 CMT which is working fine after upgrading to a Samsung 128GB SSD, Intel Pentium D 3.4 GHz, 4GB RAM, and an AMD Radeon HD 6450. I am running Win 8.1 Pro x64, with the most recent upgrade, and have absolutely no problems. I now want to add a second internal HDD, and wonder what is the max size I can go to. Can I go to 2TB, or am I limited to a lower figure? 1TB? 500GB? 250GB?
Will be glad for some help here, especially if it has been actually tried in practice.
Thanks in advance.
Best regards
This question was solved.
View Solution.

You're very welcome.
Yes, they are very nice machines.
What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
The downside of that model is that there are no settings for ahci or raid.
I own or have owned every CMT since the d510 with the exception of the dc7900.
My main PC is now the 8200 Elite CMT which I installed W8.1 on.
It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
I threw in a Radeon HD 6670 in that one.
Best Regards,
Paul

Problem regarding the creation of Table using CSS.

Hi ,
Here I have a Problem regarding the creation of Table using CSS.
In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
width:900px;
height : auto,
Overflow : visible,
Max-height: : 200px.
If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
Thanks & Regards
Madhavi

Hey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?

Is there a C version that does what the MAX 1-D Interactive does?

Is there a C version that does what the MAX 1-D Interactive does? Or a solution to the problem below.
I got the MAX 1-D Interactive to work with my stepper motor. The hardware setup is at the bottom.
I am trying to write a C program in Visual Studio 2010 to control a stepper motor. I found an example program called 1D Straight Line Move.c in
C:\Program Files\National Instruments\NI-Motion\Documentation\Examples\NI-Motion Help\C
I copied the example file and the needed .h, .c and .lib files into a Visual Studio project. I changed the velocity, acceleration, and deceleration to match the values in the MAX 1-D Interactive. The solution builds, but when I run it I get the following error message
Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention with a function pointer declared with a different calling convention.
Setup:
I am running the latest NI Motion Software.
PXI-7334 connected to UMI-7774 using I/O Motion cable
UMI-7774 connected to P70360 Stepper Driver using control cable
P70360 Stepper Driver connected to NEMA 23 (T21NRLC) using Orange (A-), Black (A), Yellow (B-), Red (B)
NEMA 23 is powered by 120V AC power supply
P70360 Stepper Driver is set using DIP Switches (I tried to use the P7000 software tool that came with it, but it never found the driver):
S1: 1
S2-1: Off
S2-2: On
S2-3: On
S2-4: On
S2-5: Off
S2-6: Off
S2-7: Off
S2-8: Off
S2-9: Off
S2-10: On
S2-11: On
S2-9: Off
Attachments:
1D Straight Line Move.c ‏5 KB

No I am not using Visual C++ MFC. I am using an empty C++ project in Microsoft Visual Studio 2010. Although I eventually want to create a .exe file from this project so I'll have change project type.
The motor runs using MAX to control it.
It did run using the 1D Straight Line Move.c project, but it gave me the below errors. That night I unplugged it because the stepper motor gets hot. The next day MAX still moves the motor but the 1D Straight Line Move.c project doesn’t and I still get the errors below.
I am getting two errors: (I was getting the same errors yesterday)
Run-Time Check Failure #2 - Stack around the variable 'errorCode' was corrupted.
Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention with a function pointer declared with a different calling convention.
I think the errors come from using the functions in flexmotn.h. The functions look like they are being used correctly, but I can't find where they are defined. They are probably defined in FlexMS32.lib.
I attached the files I am using.
I haven’t tried any of the other examples. 1D Straight Line Move.c looks like the simplest and closest to what I want to do.
Attachments:
Files.zip ‏82 KB

"Performance" problems with the File adapter on Plain J2SE Adapter Engine

Hi,
At the moment I'm on a customer side to solve some XI issues for a few days. One of the issues is the performance of the Plain J2SE Adapter Engine, using the file adapter to transfer XML messages(already XI message format) from the legacy system to the Integration Engine. The File adapter has to deal with "large" XML messages(max at the moment is 65 Mb) and the engine fails with the following error when transferring the big XML file: "ERROR: Finished sending to Integration Engine with error "java.lang.OutOfMemoryError". Skip confirmation and quit this loop".
As far I got the information from the customer the memory use of the Plain adapter engine is set to 512Mb. This is maybe to low. But I don't know where to look for this, I only have the adapter web interface in front of me, no access to the OS it self via for example remote connection.
On the Integration Engine I know there is the ability to split large message with the file adapter(File Content Conversion), but I don't know this for the Plain Adapter Engine. Is there a possibility to do this also on the Plain Adapter Engine?
Thanks in advance for any input.
Greetings,
Patrick

Hi Sameer,
Thanks for your answers.
On the first solution, yes that is possible, we first decided to see if the legacy system can do the splitting, before starting developing a Java program.
On the second solution, as far as I know is this solution possible on the Integration Engine. But we are facing the problems on the Plain J2SE Adapter Engine. I went trough that documentation(link:
http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm ), to look for I similiar solution in the Plain Adapter Engine. So my question is, is this possible with the Plain Adapter? And if so, what kind of parameters I need to use to achieve this.
Regards,
Patrick

I07 problems to the max!

Similar Messages

Maybe you are looking for