Ibdev error when initialise secondary GPIB address

I have ibdev error when I use secondary address(I need use it). I use MSVS6.0 and your example, it works with keithley, but not with my device. When I work with my device by LabVIEW and for addressing use "1+1"(for example) it works. But I am getting mistake when I try to initialise device in VStudio, without secondary address it does not understand my command.
Please help me.

The NI-488.2 API adds 96 to the secondary address to create it properly (since a SAD of 0 is different than no secondary address). Try using
ibdev 0 1 97 12 1 0
to open a device a primary address 1 and secondary address 1.

Similar Messages

  • Error when importing .csv into Address Book. Address,Street etc doesnt show

    Can anyone help me?
    I saved my excel contact list to either Tab Delimeted .txt or .csv file. Then when i import in Address book as Test file, it does not import the address. And when i click on the tabs to import, it keeps loading and hang.
    Even if i dont import the address line, those underlined were not shown even though detected.
    My columns are:
    First / Last / Job Title / Company / Address / Street / City / _*Postal Code*_ / Country / State / Phone / Work / Phone Fax

    Are you trying to import from within the AB application, menubar File > Import > VCards? If so, what happens if, in Finder, you just double-click on the VCF file?

  • Merge Replication Error When Initialising subscription

    I have a SQL server 2005 server with a merge publication of 6 articles all of which are tables which is also the distributor. I have two existing subscriptions one from a SQL 2005
    Server and one from a SQL Server 2008 R2 Server both of which are working fine on this publication. I am trying to setup a third subscription to another SQL Server 2008 R2 server, the only difference with this server is that it is a named instance. I have
    forced the port to 1433, and created an alias on the publisher connectivity is not an issue or at least i don't think so.
    when I try to initialise the subscription from a new snapshot I get the below error;
    Error: 14151, Severity: 18, State: 1.
    Replication-Replication Merge Subsystem: agent failed. No subscription is on this publication or article.
    I've changed the agent profile and turned on verbose logging and output the results to a file the snapshot delivery is failing on the below for the first table;
    call sys.sp_MSsetup_identity_range (?,?,?,?,?,?,?,?)
    I've checked the subscriber and the table does indeed get dropped and created, permissions / routes don't seem to be an issue. I've included some of the verbose logging output below.
    2012-01-11 12:05:40.684 Microsoft SQL Server Merge Agent 9.00.3042.00
    2012-01-11 12:05:40.700 Copyright (c) 2005 Microsoft Corporation
    2012-01-11 12:05:40.716 Microsoft SQL Server Replication Agent: replmerg
    2012-01-11 12:05:40.716 
    2012-01-11 12:05:40.731 The timestamps prepended to the output lines are expressed in terms of UTC time.
    2012-01-11 12:05:40.747 User-specified agent parameter values:
    -Publisher PubServerName
    -PublisherDB UserDBName
    -Publication MtoC_M
    -Subscriber SubServerName
    -SubscriberDB UserDBName
    -Distributor PubServerName
    -DistributorSecurityMode 1
    -Continuous
    -OutputVerboseLevel 4
    -Output G:\CMcReplicationLogging\OUTPUT.TXT
    -XJOBID 0x5FFBC73C3A4A494A9E10C369696B1C72
    -XJOBNAME PubServerName-UserDBName-MtoC_M-SubServerName-29
    -XSTEPID 2
    -XSUBSYSTEM Merge
    -XSERVER PubServerName
    -XCMDLINE 0
    -XCancelEventHandle 000008EC
    -XParentProcessHandle 00000E9C
    2012-01-11 12:05:40.841 Percent Complete: 0
    2012-01-11 12:05:40.841 Connecting to Distributor 'PubServerName'
    2012-01-11 12:05:40.856 Repl Agent Status: 3
    2012-01-11 12:05:40.856 Connecting to OLE DB Distributor at datasource: 'PubServerName', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI'
    2012-01-11 12:05:42.137 OLE DB Distributor: PubServerName
    DBMS: Microsoft SQL Server
    Version: 09.00.3042
    catalog name: 
    user name: dbo
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2012-01-11 12:05:42.137 OLE DB Distributor 'PubServerName': {call sp_MSgetversion }
    2012-01-11 12:05:42.153 OLE DB Distributor 'PubServerName': {call sp_helpdistpublisher (N'PubServerName') }
    2012-01-11 12:05:42.169 OLE DB Distributor 'PubServerName': {call sp_MShelp_repl_agent (N'PubServerName', N'UserDBName', N'MtoC_M', N'SubServerName', N'UserDBName', 1)}
    2012-01-11 12:05:42.169 OLE DB Distributor 'PubServerName': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'PubServerName')
    2012-01-11 12:05:42.184 OLE DB Distributor 'PubServerName': {call sp_MShelp_merge_agentid (0,N'UserDBName',N'MtoC_M',null,N'UserDBName',90,N'SubServerName')}
    2012-01-11 12:05:42.184 OLE DB Distributor 'PubServerName': {call sp_MShelp_profile (29, 4, N'')}
    2012-01-11 12:05:42.184 Percent Complete: 0
    2012-01-11 12:05:42.184 Connecting to OLE DB Publisher at datasource: 'PubServerName', location: '', catalog: 'UserDBName', providerstring: '' using provider 'SQLNCLI'
    2012-01-11 12:05:42.200 Initializing
    2012-01-11 12:05:42.200 Repl Agent Status: 1
    2012-01-11 12:05:42.216 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:42.216 Percent Complete: 0
    2012-01-11 12:05:42.231 Connecting to Publisher 'PubServerName'
    2012-01-11 12:05:42.231 Repl Agent Status: 3
    2012-01-11 12:05:42.231 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:43.153 OLE DB Publisher: PubServerName
    DBMS: Microsoft SQL Server
    Version: 09.00.3042
    catalog name: UserDBName
    user name: dbo
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2012-01-11 12:05:43.169 OLE DB Publisher 'PubServerName': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
    N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
    as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2012-01-11 12:05:43.169 OLE DB Publisher 'PubServerName': {call sp_MSgetversion }
    2012-01-11 12:05:43.200 Connecting to OLE DB Publisher at datasource: 'PubServerName', location: '', catalog: 'UserDBName', providerstring: '' using provider 'SQLNCLI'
    2012-01-11 12:05:44.137 OLE DB Publisher: PubServerName
    DBMS: Microsoft SQL Server
    Version: 09.00.3042
    catalog name: UserDBName
    user name: dbo
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2012-01-11 12:05:44.137 OLE DB Publisher 'PubServerName': {call sp_MSchecksnapshotstatus (N'MtoC_M')}
    2012-01-11 12:05:44.153 OLE DB Publisher 'PubServerName': {call sp_helpmergepublication (N'MtoC_M')}
    2012-01-11 12:05:44.153 OLE DB Publisher 'PubServerName': {call sys.sp_MSgetreplicainfo(?,?,?,?,?,?,?,90)}
    2012-01-11 12:05:44.169 OLE DB Distributor 'PubServerName': {call sp_MShelp_repl_agent (N'PubServerName', N'UserDBName', N'MtoC_M', N'SubServerName', N'UserDBName', 1)}
    2012-01-11 12:05:44.169 Connecting to OLE DB Subscriber at datasource: 'SubServerName', location: '', catalog: 'UserDBName', providerstring: '' using provider 'SQLNCLI'
    2012-01-11 12:05:44.747 OLE DB Subscriber: SubServerName
    DBMS: Microsoft SQL Server
    Version: 10.50.1600
    catalog name: UserDBName
    user name: distributor_MtoC
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2012-01-11 12:05:45.122 OLE DB Subscriber 'SubServerName': {call sp_MSgetversion }
    2012-01-11 12:05:45.216 OLE DB Subscriber 'SubServerName': {call sp_MSreplcheck_subscribe}
    2012-01-11 12:05:45.309 OLE DB Subscriber 'SubServerName': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
    N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
    as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2012-01-11 12:05:45.419 Percent Complete: 0
    2012-01-11 12:05:45.419 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.419 Connecting to Subscriber 'SubServerName'
    2012-01-11 12:05:45.434 Repl Agent Status: 3
    2012-01-11 12:05:45.434 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.559 Percent Complete: 0
    2012-01-11 12:05:45.559 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.559 Retrieving publication information
    2012-01-11 12:05:45.575 Repl Agent Status: 3
    2012-01-11 12:05:45.575 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.653 OLE DB Subscriber 'SubServerName': {call sys.sp_MSmerge_upgrade_subscriber(1,?)}
    2012-01-11 12:05:45.653 Percent Complete: 0
    2012-01-11 12:05:45.669 Retrieving subscription information.
    2012-01-11 12:05:45.669 Repl Agent Status: 3
    2012-01-11 12:05:45.684 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.763 OLE DB Publisher 'PubServerName': {call sys.sp_MSgetreplicainfo(?,?,?,?,?,?,?,90)}
    2012-01-11 12:05:45.763 OLE DB Publisher 'PubServerName': {call sys.sp_MShelpmergearticles (?,9000000,?) }
    2012-01-11 12:05:45.778 OLE DB Publisher 'PubServerName': {call sp_MSenumschemachange (?,?,9000000,?,0,1) }
    2012-01-11 12:05:45.794 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.888 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.888 Percent Complete: 0
    2012-01-11 12:05:45.903 Applying the snapshot to the Subscriber
    2012-01-11 12:05:45.903 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.903 Repl Agent Status: 3
    2012-01-11 12:05:45.919 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.919 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.919 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.934 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.950 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.950 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.966 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.981 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.997 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:45.997 OLE DB Subscriber 'SubServerName': {call master..sp_helpreplicationoption ('merge')}
    2012-01-11 12:05:46.091 OLE DB Subscriber 'SubServerName': {call sys.sp_MSmergesubscribedb ('true', 0) }
    2012-01-11 12:05:47.263 OLE DB Subscriber 'SubServerName': {call sp_MSpublicationcleanup (?,?,?)}
    2012-01-11 12:05:47.372 OLE DB Subscriber 'SubServerName': {call sp_MSCleanupForPullReinit (?,?,?)}
    2012-01-11 12:05:47.481 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblEmailMessages',N'dbo')}
    2012-01-11 12:05:47.606 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblUser',N'dbo')}
    2012-01-11 12:05:47.716 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblDPVLocked',N'dbo')}
    2012-01-11 12:05:47.809 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblCaptureAppToken',N'dbo')}
    2012-01-11 12:05:47.903 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblCreditThresholdNotification',N'dbo')}
    2012-01-11 12:05:48.013 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblCreditPot',N'dbo')}
    2012-01-11 12:05:48.106 OLE DB Subscriber 'SubServerName': {call sys.sp_MSaddinitialpublication (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:48.247 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblEmailMessages',?, 1, ?, ?)}
    2012-01-11 12:05:48.403 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblUser',?, 1, ?, ?)}
    2012-01-11 12:05:48.513 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblDPVLocked',?, 1, ?, ?)}
    2012-01-11 12:05:48.606 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblCaptureAppToken',?, 1, ?, ?)}
    2012-01-11 12:05:48.700 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblCreditThresholdNotification',?, 1, ?, ?)}
    2012-01-11 12:05:48.809 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblCreditPot',?, 1, ?, ?)}
    2012-01-11 12:05:48.903 OLE DB Publisher 'PubServerName': {call sp_MShelpmergeschemaarticles(?)}
    2012-01-11 12:05:48.919 OLE DB Subscriber 'SubServerName': {call sp_MSaddinitialsubscription (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)}
    2012-01-11 12:05:49.059 OLE DB Distributor 'PubServerName': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'PubServerName')
    2012-01-11 12:05:49.059 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'PubServerName',N'UserDBName',N'MtoC_M',N'SubServerName',N'UserDBName',0,1,0,N'',?,90)}
    2012-01-11 12:05:49.075 OLE DB Subscriber 'SubServerName': {call sp_MScreateglobalreplica (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,90)}
    2012-01-11 12:05:49.341 Connecting to OLE DB Subscriber at datasource: 'SubServerName', location: '', catalog: 'UserDBName', providerstring: '' using provider 'SQLNCLI'
    2012-01-11 12:05:49.825 OLE DB Subscriber: SubServerName
    DBMS: Microsoft SQL Server
    Version: 10.50.1600
    catalog name: UserDBName
    user name: distributor_MtoC
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2012-01-11 12:05:50.185 OLE DB Subscriber: SubServerName
    DBMS: Microsoft SQL Server
    Version: 10.50.1600
    catalog name: UserDBName
    user name: distributor_MtoC
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2012-01-11 12:05:50.325 OLE DB Subscriber 'SubServerName': {call sys.sp_MSregistermergesnappubid(?, ?)}
    2012-01-11 12:05:50.450 OLE DB Subscriber 'SubServerName': sp_MSacquiresnapshotdeliverysessionlock
    2012-01-11 12:05:50.544 OLE DB Subscriber 'SubServerName': sp_MStrypurgingoldsnapshotdeliveryprogress
    2012-01-11 12:05:50.810 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:50.966 [2%] OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    ꜻä㹒 ꜐äB 11 12:05ä谼砗꜐ä镴ĀPercent Complete: 4
    2012-01-11 12:05:50.997 Propagated 1 schema changes: 1 total
    2012-01-11 12:05:51.013 Repl Agent Status: 3
    2012-01-11 12:05:51.013 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:51.091 [6%] OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    ꜻä㹒 ꜐äB 11 12:05ä谼砗꜐ä镴ĀPercent Complete: 6
    2012-01-11 12:05:51.122 Propagated 1 schema changes: 2 total
    2012-01-11 12:05:51.153 Repl Agent Status: 3
    2012-01-11 12:05:51.153 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:51.200 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkreplinfo (N'tblEmailMessages')}
    2012-01-11 12:05:51.200 [6%] Percent Complete: 6
    2012-01-11 12:05:51.231 Propagated 1 schema changes: 3 total
    2012-01-11 12:05:51.247 Repl Agent Status: 3
    2012-01-11 12:05:51.263 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:51.325 OLE DB Subscriber 'SubServerName': sp_MSissnapshotitemapplied @snapshot_session_token = N'E:\Microsoft SQL Server\MSSQL.1\MSSQL\repldata\unc\PubServerName_UserDBName_MTOC_M\20120111115787\', @snapshot_progress_token = N'E:\Microsoft
    SQL Server\MSSQL.1\MSSQL\repldata\unc\PubServerName_UserDBName_MTOC_M\20120111115787\tblEmailMessages_2.sch'
    2012-01-11 12:05:51.435 drop Table [dbo].[tblEmailMessages]
    go
    SET ANSI_PADDING ON
    go
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    CREATE TABLE [dbo].[tblEmailMessages](
    [EmailMessageId] [bigint] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
    [Guid] [nvarchar](32) NOT NULL,
    [Recipients] [varchar](8000) NOT NULL,
    [CcRecipients] [varchar](8000) NULL,
    [BccRecipients] [varchar](8000) NULL,
    [Sender] [varchar](8000) NOT NULL,
    [Subject] [nvarchar](4000) NOT NULL,
    [BodyText] [nvarchar](max) NULL,
    [BodyHTML] [nvarchar](max) NULL,
    [IsBodyEncrypted] [bit] NOT NULL CONSTRAINT [DF_tblEmailMessages_IsBodyEncrypted] DEFAULT ((0)),
    [Status] [tinyint] NOT NULL CONSTRAINT [DF_tblEmailMessages_Status] DEFAULT ((1)),
    [DateAdded] [datetime] NOT NULL CONSTRAINT [DR_tblEmailMessages_DateAdded] DEFAULT (getdate()),
    [rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [MSmerge_df_rowguid_207F75F229994684BC3FAAE5BE4CD6EB] DEFAULT (newsequentialid())
    GO
    GRANT DELETE ON [dbo].[tblEmailMessages] TO [odintermediary]
    GO
    GRANT INSERT ON [dbo].[tblEmailMessages] TO [odintermediary]
    GO
    GRANT SELECT ON [dbo].[tblEmailMessages] TO [odintermediary]
    GO
    GRANT UPDATE ON [dbo].[tblEmailMessages] TO [odintermediary]
    GO
    SET ANSI_NULLS ON
    go
    SET QUOTED_IDENTIFIER ON
    go
    ALTER TABLE [dbo].[tblEmailMessages] ADD CONSTRAINT [PK_tblEmailMessage] PRIMARY KEY CLUSTERED 
    [EmailMessageId] ASC
    )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON)
    GO
    2012-01-11 12:05:51.450 OLE DB Subscriber 'SubServerName': drop Table [dbo].[tblEmailMessages]
    2012-01-11 12:05:51.560 OLE DB Subscriber 'SubServerName': SET ANSI_PADDING ON
    2012-01-11 12:05:51.669 OLE DB Subscriber 'SubServerName': SET ANSI_NULLS ON
    2012-01-11 12:05:51.778 OLE DB Subscriber 'SubServerName': SET QUOTED_IDENTIFIER ON
    2012-01-11 12:05:51.872 OLE DB Subscriber 'SubServerName': CREATE TABLE [dbo].[tblEmailMessages](
    [EmailMessageId] [bigint] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
    [Guid] [nvarchar](32) NOT NULL,
    [Recipients] [varchar](8000) NOT NULL,
    [CcRecipients] [varchar](8000) NULL,
    [BccRecipients] [varchar](8000) NULL,
    [Sender] [varchar](8000) NOT NULL,
    [Subject] [nvarchar](4000) NOT NULL,
    [BodyText] [nvarchar](max) NULL,
    [BodyHTML] [nvarchar](max) NULL,
    [IsBodyEncrypted] [bit] NOT NULL CONSTRAINT [DF_tblEmailMessages_IsBodyEncrypted] DEFAULT ((0)),
    [Status] [tinyint] NOT NULL CONSTRAINT [DF_tblEmailMessages_Status] DEFAULT ((1)),
    [DateAdded] [datetime] NOT NULL CONSTRAINT [DR_tblEmailMessages_DateAdded] DEFAULT (getdate()),
    [rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [MSmerge_df_rowguid_207F75F229994684BC3FAAE5BE4CD6EB] DEFAULT (newsequentialid())
    2012-01-11 12:05:51.981 OLE DB Subscriber 'SubServerName': GRANT DELETE ON [dbo].[tblEmailMessages] TO [odintermediary]
    2012-01-11 12:05:52.091 OLE DB Subscriber 'SubServerName': GRANT INSERT ON [dbo].[tblEmailMessages] TO [odintermediary]
    2012-01-11 12:05:52.200 OLE DB Subscriber 'SubServerName': GRANT SELECT ON [dbo].[tblEmailMessages] TO [odintermediary]
    2012-01-11 12:05:52.294 OLE DB Subscriber 'SubServerName': GRANT UPDATE ON [dbo].[tblEmailMessages] TO [odintermediary]
    2012-01-11 12:05:52.403 OLE DB Subscriber 'SubServerName': SET ANSI_NULLS ON
    2012-01-11 12:05:52.497 OLE DB Subscriber 'SubServerName': SET QUOTED_IDENTIFIER ON
    2012-01-11 12:05:52.606 OLE DB Subscriber 'SubServerName': ALTER TABLE [dbo].[tblEmailMessages] ADD CONSTRAINT [PK_tblEmailMessage] PRIMARY KEY CLUSTERED 
    [EmailMessageId] ASC
    )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON)
    2012-01-11 12:05:52.716 OLE DB Subscriber 'SubServerName': sp_MSrecordsnapshotdeliveryprogress @snapshot_session_token = N'E:\Microsoft SQL Server\MSSQL.1\MSSQL\repldata\unc\PubServerName_UserDBName_MTOC_M\20120111115787\', @snapshot_progress_token = N'E:\Microsoft
    SQL Server\MSSQL.1\MSSQL\repldata\unc\PubServerName_UserDBName_MTOC_M\20120111115787\tblEmailMessages_2.sch'
    2012-01-11 12:05:52.841 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:52.966 [6%] Percent Complete: 6
    2012-01-11 12:05:52.981 Applied script 'tblEmailMessages_2.sch'
    2012-01-11 12:05:52.981 Repl Agent Status: 3
    2012-01-11 12:05:52.981 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:53.153 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:53.263 [6%] OLE DB Subscriber 'SubServerName': {call sys.sp_MSaddinitialarticle (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    ꜻä㹒 ꜐äB 11 12:05ä谼砗꜐ä镴ĀPercent Complete: 6
    2012-01-11 12:05:53.294 Preparing table 'tblEmailMessages' for merge replication
    2012-01-11 12:05:53.294 Repl Agent Status: 3
    2012-01-11 12:05:53.310 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:53.450 OLE DB Subscriber 'SubServerName': {call sp_MSupdatesysmergearticles (?,?,?,?,0)}
    2012-01-11 12:05:53.575 OLE DB Subscriber 'SubServerName': {call sys.sp_MSsetup_identity_range (?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:53.794 The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with
    verbose history logging and specify an output file to which to write.
    2012-01-11 12:05:53.825 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:53.966 Percent Complete: 6
    2012-01-11 12:05:53.966 No subscription is on this publication or article.
    2012-01-11 12:05:53.997 Repl Agent Status: 6
    2012-01-11 12:05:54.013 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2012-01-11 12:05:54.216 Percent Complete: 0
    2012-01-11 12:05:54.231 Category:SQLSERVER
    Source: SubServerName
    Number: 14050
    Message: No subscription is on this publication or article.
    2012-01-11 12:05:54.247 Repl Agent Status: 3
    2012-01-11 12:05:54.372 Percent Complete: 0
    2012-01-11 12:05:54.372 Category:NULL
    Source: Merge Replication Provider
    Number: -2147201001
    Message: The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history
    logging and specify an output file to which to write.
    2012-01-11 12:05:54.388 Repl Agent Status: 3
    2012-01-11 12:05:54.388 Disconnecting from OLE DB Subscriber 'SubServerName'
    2012-01-11 12:05:54.388 Disconnecting from OLE DB Subscriber 'SubServerName'
    2012-01-11 12:05:54.403 Disconnecting from OLE DB Subscriber 'SubServerName'
    2012-01-11 12:05:54.403 Disconnecting from OLE DB Subscriber 'SubServerName'
    2012-01-11 12:05:54.403 Disconnecting from OLE DB Publisher 'PubServerName'
    2012-01-11 12:05:54.419 Disconnecting from OLE DB Publisher 'PubServerName'
    2012-01-11 12:05:54.419 Disconnecting from OLE DB Publisher 'PubServerName'
    2012-01-11 12:05:54.419 Disconnecting from OLE DB Publisher 'PubServerName'
    2012-01-11 12:05:54.435 Disconnecting from OLE DB Distributor 'PubServerName'
    2012-01-11 12:05:54.435 Disconnecting from OLE DB Distributor 'PubServerName'
    2012-01-11 12:05:54.450 The merge process will restart after waiting 30 second(s)...
    Percent Complete: 0
    Any help would be much appreciated.
    Thanks
    Chris 

    The error happens on this table every time.
    The schema of the table is below;
    CREATE TABLE [dbo].[tblEmailMessages](
    [EmailMessageId] [bigint] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
    [Guid] [nvarchar](32) NOT NULL,
    [Recipients] [varchar](8000) NOT NULL,
    [CcRecipients] [varchar](8000) NULL,
    [BccRecipients] [varchar](8000) NULL,
    [Sender] [varchar](8000) NOT NULL,
    [Subject] [nvarchar](4000) NOT NULL,
    [BodyText] [nvarchar](max) NULL,
    [BodyHTML] [nvarchar](max) NULL,
    [IsBodyEncrypted] [bit] NOT NULL CONSTRAINT [DF_tblEmailMessages_IsBodyEncrypted] DEFAULT ((0)),
    [Status] [tinyint] NOT NULL CONSTRAINT [DF_tblEmailMessages_Status] DEFAULT ((1)),
    [DateAdded] [datetime] NOT NULL CONSTRAINT [DR_tblEmailMessages_DateAdded] DEFAULT (getdate()),
    [rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [MSmerge_df_rowguid_207F75F229994684BC3FAAE5BE4CD6EB] DEFAULT
    (newsequentialid())
    The table gets dropped and recreated each time i try to reinitialise the subscription.  I can't remove the article at the moment as two other servers subscribe to the publication.
    Thanks for your help
    Chris
    I am the master of my fate: I am the captain of my soul.

  • Error when recreate secondary indexes

    hi all
    in db02 i have two missing secondary indexes.
    when i try recreate :
    in db02  select missing index -> choose processing type: direct processing -> create
    i have error :
    Internal error 1  in module DD_LONGNPROT_NAME_GET occurred
    Diagnosis
    An unexpected SQL error occurred in the ABAP/4 Dictionary interface.
    System response
    A system log entry has been written. This gives more precise information about where the termination occurred and the reason for the termination. The current transaction has been cancelled.
    Procedure
    Please check the system log and eliminate the cause of the SQL error.
    in sm21 no errors
    in db alert log no errors
    how can resolve this problem?
    thanks

    Hi Andrey,
    Please try to active the secondary indexes  in transaction SE14. Please gothrough the note 1248769 as how to active the
    indexes.
    Many thanks.
    Mohammed Hussain.

  • Error when number sign # in address field of form

    I need to be able to accept the number sign # in my form field for address, ie apt #3. When a # is submitted with my form, I get an error. How do I allow the # to be included for this field?
    <cfinput style="WIDTH: 247px" size="30"  type="text" name="shipaddress" value="" required="yes" message="You must enter your address">

    Thank you for your help. I am very new here.
    The form collecting the address is on my shopping cart and is working fine, I ran the test code you provided.
    The data from the form is then inserted into a database.
    intodb.cfm
    INSERT INTO people(firstname,lastname,email,address,city,state,country,zip,phone,shipfirst,shiplast,s hipaddress,shipcity,shipstate,shipzip,shipcountry,lastfour,frequency,cases,ccmo,ccyr,cctyp e,dater,cfid,cftoken)
    VALUES('#shipfirst#','#shiplast#','#email_addr#','#shipaddress#','#shipcity#','#shipstate# ','#shipcountry#','#shipzip#','#phone#','#shipfirst#','#shiplast#','#shipaddress#','#shipc ity#','#shipstate#','#shipzip#','#shipcountry#','#lastfour#','#frequency#','#cases#','#ccm o#','#ccyr#','#cctype#','#DateFormat("#Now()#", "yyyy-mm-dd")# #TimeFormat("#Now()#", "hh:mm:sstt")#','#session.cfid#','#session.cftoken#')
    <cflocation url="sale2.cfm?shipmethod=#shipmethod#&shipcost=#shipcost#&shipfirst=#shipfirst#&shiplast =#shiplast#&shipaddress=#shipaddress#&shipcity=#shipcity#&shipstate=#shipstate#&shipzip=#s hipzip#&shipcountry=#shipcountry#&country=#shipcountry#&phone=#phone#&email_addr=#email_ad dr#&ccnum=#ccnum#&ccmo=#ccmo#&ccyr=#ccyr#&cctype=#cctype#&ordertotal=#ordertotal#&disc=#di sc#">
    Then on sale2.cfm.
    <cfsavecontent variable="strXML">
    <?xml version="1.0" standalone="yes"?>
    <SaleRequest>
    <CustomerData>
    <Email>#email_addr#</Email>
    <BillingAddress>
    <Address1>#shipaddress#</Address1>
    <FirstName>#shipfirst#</FirstName>
    <LastName>#shiplast#</LastName>
    <City>#shipcity#</City>
    <State>#shipstate#</State>
    <Zip>#shipzip#</Zip>
    <Country>#shipcountry#</Country>
    <Phone>#phone#</Phone>
    </BillingAddress>
    I receive this error, assuming it is the EMAIL_ADDR variable because it is the first one:
    Variable  EMAIL_ADDR is undefined.

  • Weird "relay access denied" error when using "%" in email address

    Hi, I've written a solution that allows emails to be processed and redirected through my mail server. First, we receive mail at user%[email protected]. Then, we do some checks to make sure its legit, alter its content and re-send it to [email protected]. I posted another topic in this forum getting some advice as to how to build it, but it's all built and working well... or so I thought...
    I initially had trouble with using the % symbol as the delimiter because of a default postfix behavior (postfix by default treats the % as my custom application is, which of course can be dangerous). However, I added "allowpercenthack = no" to main.cf and that seemed to allow postfix to not attempt to process it itself and let my application do the work.
    However, if I now send mail now to my server (from another server) destined to user%[email protected], I (and my log) gets:
    <user%[email protected]>: Relay access denied (in reply to RCPT TO command)
    However, if I send to an address WITHOUT the %, like something [email protected], the whole thing works correctly.
    HOWEVER, if I send messages WITH and WITHOUT the % from the command line while ON the server, I don't get these errors.
    My main.cf has the following restrictions(s):
    <pre>smtpdrecipientrestrictions = rejectnon_fqdnrecipient, checkrecipientaccess hash:/etc/postfix/access,
    permit_mynetworks, rejectunauthdestination, rejectnon_fqdnsender,
    rejectnon_fqdnhostname, rejectinvalidhostname, checkheloaccess hash:/etc/postfix/helo_access,
    rejectrblclient zen.spamhaus.org, rejectrblclient bl.spamcop.net, rejectrblclient relays.ordb.org,
    permit</pre>
    I'm assuming that permit_mynetworks is allowing this to work from my server's command line, and therefore I'm suspecting rejectunauthdestination is what's killing my ability to use the % symbol. As a test, I removed rejectunauthdestination temporarily and reload postix. The next mail received triggered this error in the log:
    Mar 16 12:24:28 server postfix/smtpd[1368]: fatal: parameter "smtpdrecipientrestrictions": specify at least one working instance of: checkrelaydomains, rejectunauthdestination, reject, defer or deferifpermit
    Of course. I needed one of those directives. I didn't want reject, defer or deferifpermit, and documentation on checkrelaydomains was not available at http://www.postfix.org/postconf.5.html. However, I tried checkrelaydomains, and it seemed to work as expected permitting my % emails and rejecting stuff it should, but of course the 'gotcha' was that postfix's log now reflected:
    Mar 16 12:33:08 server postfix/smtpd[1579]: warning: support for restriction "checkrelaydomains" will be removed from Postfix; use "rejectunauthdestination" instead
    Mar 16 12:33:08 server postfix/smtpd[1579]: warning: restriction `rejectnon_fqdnsender' after `checkrelaydomains' is ignored
    So, can anyone recommend a way I can polish up my restrictions to allow these % addresses without opening myself up for anything dangerous?
    Side question: I placed `rejectnon_fqdnsender' after rejectunauthdestination destination because I didn't want to bother checking the sender unless I confirmed the recipient was at my server. Does that comment that it doesn't work after checkrelaydomains, mean that it also doesn't get processed after rejectunauthdestination?
    MacBook   Mac OS X (10.4.8)  

    However, I added "allowpercenthack = no" to main.cf
    and that seemed to allow postfix to not attempt to
    process it itself and let my application do the
    work.
    However, if I now send mail now to my server (from
    another server) destined to
    user%[email protected], I (and my
    log) gets:
    Hardly ever had a need for this, but if I remember correctly you will need to set:
    allowuntrustedrouting = yes
    in main.cf
    (No need for allowpercenthack (I think))
    or you could create a hash table before rejectunauthdestination to return OK based on your needed patterns.
    I think the first method will work though.
    Side question: I placed `rejectnon_fqdnsender'
    after rejectunauthdestination destination because I
    didn't want to bother checking the sender unless I
    confirmed the recipient was at my server. Does that
    comment that it doesn't work after
    checkrelaydomains, mean that it also doesn't get
    processed after
    checkrelaydomains is deprecated
    You can place rejectnon_fqdnsender anywhere you like or even omit it, but I don't see why you would have to.

  • Error when using using email address used for HP Store when signing up for ePrint

    When signing up for ePrint I had to use a different email address to my usual because:
    1) ePrint kept saying that my email address was already in use, or pswd was incorrect
    2) When checking it wasn't the passord - using forgotten pwd (as I hadn't yet signed up for ePrint - surprised if this) then after entering same email I got a message saying the correct account was needed before the forgotten pwd function would work (catch22). I would have at least expected an email to come through regarding pwd to that email - mine or not.
    I've now had to use another email address to register for ePrint, which is annoying.
    Any assistance to re-align to one email (and maintain integrity) greatly appreciated.
    Thanks

    Hi msmale,
    Do you have a Snapfish account? If so, (or even if you’re not sure) try logging in with the Snapfish icon below the Sign in Button. If you do not know your Snapfish password, you can select “forgot password” and an email will be sent to you to reset your password. Once you reset your password, go back in to the ePrint Center and try to sign in with this new information.
    I was an HP employee.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • MDM 3.0: error when deleting a Standard Address

    Hi,
    when loading delections in MDM 3.0, the function module BUPA_ADDRESS_REMOVE can't delete addresses if in the table BUT021_FS the field XDFADU is = 'X'.
    This means that I can't delete a Standard Address.
    Do you know how can I by-pass this problem?
    I need to delete those addresses.
    Thanks in advance.
    Fabrizio Rubino

    Hi Fabrizio,
    first of all this is a correct behaviour of the SAP Business Partner (BP). The address handling is designed in a way, that you cannot delete a default address if a BP already had one. The question is what do you want to do with the addresses? Do you want to delete all addresses of a BP? Then the answer is that this is not possible (at least it is not possible without modifying SAP code). If you want to replace the standard address, the sollution is to import the new standard address first, change the "is standard address" flag and then delete the old one.
    Kind regards
    Michael

  • Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

    Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
    I open the remote power shell to the exchange server 2013.
    Issue the following commands and getting the following error.
    $mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
    At line:1 char:27
    + $mailbox.EmailAddresses -= <<<<  "eum:50004;phone-context=telExt5digits.lync5.com"
        + CategoryInfo          : InvalidOperation: (op_Subtraction:String) [], RuntimeException
        + FullyQualifiedErrorId : MethodNotFoundHelp!

    Now for an answer - your remote session doesn't have the same object you have on the server itself.  Notice it says this is an array list, not a ProxyAddressCollection.  If you need to work around this, you'll need to massage the addresses another
    way that the system will accept.  I'd try the following:
    $NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
    See what you get in the $NewAddresses variable when you do this.

  • Error when starting Firefox 3.6. "Javascript Application error. Invalid username/password combination. If you continue to get this error, try entering your email address as your username." Any suggestions on what to look for to resolve this?

    When starting Mozilla Firefox 3.6, I get an error window which opens up additionally overtop my browser windows stating:
    "Javascript Application"
    followed with :
    "Invalid username/password combination. If you continue to get this error, try entering your email address as your username."
    Obviously it is happening with one of my email addresses/usernames & password combinations of which I know the username for (which I choose not to post here) and I'm not sure where to begin looking for a resolution to this problem.

    I was able to resolve this by disabling (under Tools - Add-ons) Yahoo! Mail Notifier
    Hope this helps some of you also!

  • Error when running software on computers w/o GPIB interface card

    I'm writing some simple GPIB I/O software using the VISA libraries and I'm getting an error when I run the program on a computer that doesn't have a GPIB card. The error is "The application failed to initialize properly (0xc0000142). Click on OK..." The program runs and works fine on the machine that is hooked up to GPIB devices, but I would like to be able to use my laptop for development. I've installed version 2.3 of NI-488.2, so all the required dll libraries are there.
    Thanks in advance,
    Jeff

    Unless you're using all IVI drivers, there is no built in simulation mode. As long as you make calls to VISA that expect a GPIB board, you'll get errors. Even if you had a gpib board, if you write your code correctly, you would also get errors when the board doesn't find an instrument to write to or read from. The only solution is for you to write your own simulation code. Encapsultate your write/read functions with case statements that skip the driver calls and return simulated data.

  • I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

  • Secondary methods : Error when starting submethod

    Hi,
    I have designed a workflow for payment request : For the approver i am displaying  the document in edit mode thorough standard method .I am calling that method ( Edit method ) in the secondary method of the decision tab( METHODS tab)  .But i am getting the error "Error when starting submethod " whenver i execute the workitem.I am working ECC 6.0 .
    Please can anyone help in getting this solved .
    regards
    Paveee.

    The answer is simple: You need to co-operate with someone who has wide authorizations. It is impossible to solve a problem when you don't even have authorization to check what went wrong. I would suggest contacting your Basis team/person.
    <i>Message was edited by Kjetil Kilhavn:</i>
    But on an entirely different note, you haven't really shared information that could tell anyone what the problem is. I'm suspecting you are using a customer-specific object type, and that the problem is in your solution, rather than authorizations. The reason I am suspecting this is that experience shows most errors are in customer-specific coding (i.e. my code) and not in SAP's own code

  • When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server.  When I send to e-mail from another address, I get back an error saying the e-mail address is unknown.  My e-mail has worked fine for years until

    When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server.  When I send to e-mail from another address, I get back an error saying the e-mail address is unknown.  My e-mail has worked fine for years until yesterday.  HELP!

    The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
    If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid.  (This is the way I'm reading your question.)
    If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance.  If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements.  (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
    An email account setup is specific to an email provider, unfortunately.   If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

  • Error when updating customer Address

    Hi All,
    I am getting follwong error when using API hz_location_v2pub.update_location to update customer location
    The address cannot be validated because no geography mapping exists for this country. Please contact your system administrator.
    Any idea how to resolve it ? I have looked into Note 549057.1 in metalink and it doesn't work for us.
    We have done following setup with Regard to address(location)
    Flexfield : Address/Receivables
    Context Code : IRELAND
    Name : Ireland Address Style
    Segments: Address1,Address2,City & County.
    We havn't touched any other part of TCA. Do we need to do anything extra here?
    Many thanks for your valuable feedback.

    Hi
    Can you review and perform the following the steps as mentioned in the following note:
    Cannot Create new Customer in Release 12 - Error "The address cannot be validated because no geography mapping exists for this country" [ID 549057.1]
    Hope this helps.
    Thanks
    Manish Jain.

Maybe you are looking for