ICal delegation failing after upgrade from Snow Leopard to Lion

I've just upgraded our Snow Leopard server to run Lion Server.
I have a problem with iCal Server.
Individual calendars work OK: can be accessed from iCal / iThings and so on, and via web interface.  But calendar delegation doesn't.
If I open Accounts / Preferences / Delegation from any version of iCal / Calendar I get this error:
In the server calendar server error log I see the following:
[twext.web2.dav.method.report_expand#error] Error reading property (u'http://calendarserver.org/ns/', u'calendar-proxy-read-for') for resource /principals/__uids__/BCDF1D53-4447-40A2-A035-B30F6E2EEDE4/: <StatusResponse 403 Unable to list properties: /Volumes/StorageHD/Library/Server/Calendar and Contacts/Documents>
Anyone got any ideas what is going on and / or how to fix?
Thanks in advance for any help available.

OK - Fixed it. 
Turns out the cure is to use the Webcal Interface to re-create the delegations.  A bit tedious, but doing this presumably forces a rewrite of the file that previously cannot be accessed.  Means you need to set up the delegation again for each account - but this at least is an improvement over not being able to do anything at all.
Once fixed, delegation works just fine.
Hope this helps someone else solve the issue etc.

Similar Messages

  • After upgrade from snow leopard to lion, where is application front row?

    After upgrade from snow leopard to lion, where is application front row? i realize it when to use my remote. any one knows about this matter?

    OK - Fixed it. 
    Turns out the cure is to use the Webcal Interface to re-create the delegations.  A bit tedious, but doing this presumably forces a rewrite of the file that previously cannot be accessed.  Means you need to set up the delegation again for each account - but this at least is an improvement over not being able to do anything at all.
    Once fixed, delegation works just fine.
    Hope this helps someone else solve the issue etc.

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • After upgrading from snow leopard to lion, mail stuck in upgrade mode?

    How do I get the upgrade to STOP so I can try to open Mail again without having to trash the application. Or is that the only way? and then how do I get the Mail application? Thanks for any help!

    Go get a powered USB hub and try that. Lion may have issued a fix for devices drawing too much power, by cutting them off.

  • After upgrading from Snow Leopard to Mountain Lion, the text preference, Middle Eastern, causes Photoshop CS6 to slow down.  Can this be fixed?

    After upgrading from Snow Leopard to Mountain Lion, and setting the text preference, Middle Eastern, causes Photoshop CS6 to slow down.  Can this be fixed?

    I'm Win, not Mac, but I do have a couple saved messages
    Mac 10.8.3 Bug w/Encore and BluRay http://forums.adobe.com/thread/1198709
    -create folder not ISO http://forums.adobe.com/thread/1216127

  • System freezes when attempting to upgrade from Snow Leopard to Lion

    I hope someone can help me out there.  I have downloaded the Lion upgrade install program and built an install disk on my jump drive using Lion Diskmaker 2.0.2, but when I tried to upgrade from Snow Leopard to Lion using the jump drive, the install freezes at 24% and I cannot reboot or anything.  It just keeps coming back to the install screen.  Any suggestions?

    This could be due to a number of causes. If you have the Lion installer application, then I suggest you put it in your Downloads folder. Now do this:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    When you've done the above you should now double-click on the Lion installer application in your Applications folder. When prompted click on the Install button. Note that you will not use the flash drive you made as you shouldn't need it. And, this will avoid any issues with a bad flash drive installer.

  • I am new to mac's and have upgrade from Snow Leopard to Lion but......

    I am new to mac's and have upgrade from Snow Leopard to Lion but not all my application will work. Is it save to reinstall using original snow leopard dvd and does it wipe all my other application like apature? I am in a panic over this, any help!!
    I came across this online and i want to know is it safe to do this:
    Backup your User folders to an external drive. This should preserve your documents, photos, music, etc. If you store those things in locations not in the User folder, make sure to copy those over too.
    Insert the Snow Leopard disc. Restart your Mac and hold down C to boot to your DVD drive.
    Go to Utilities in the menu bar once the installer pops up and select “Disk Utility.”
    Find the drive in the sidebar where Lion is installed, select it and navigate to the Partition tab.
    Click on the drop down menu under Partition Layout and select “1 Partition.” Hit Apply.
    Now navigate to the Erase tab and make sure “Mac OS Extended (Journaled)” is selected, then hit Erase to delete all data on the drive.
    Quit Disk Utility to get back to the Snow Leopard installer and proceed with the install.
    Restore your User folder and documents from your backup.
    Run Software Update to get everything current, install your apps from your original install media and update those as well.
    if any one can help me that would be great, thanks Mike

    Before you do that why not do this first:
    Repair the Hard Drive and Permissions
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    If this doesn't help, then you can proceed to reinstall Snow Leopard as follows:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    This will erase the drive so be sure to backup your files before doing this.

  • I've just upgraded from Snow Leopard to Lion. Installation seemed to go OK but on rebooting it is asking where the System Events app is.  What is it and where is it located?

    I've just upgraded from Snow Leopard to Lion. The installation seemed to go OK but on rebooting it is asking where the System Events app is.  What is it and where is it located?
    Thanks

    If the dialogue appeared once, and you cancelled once, the dialogue may reappear when you next log in. For more certainty I suggest a restart of the operating system, then a log in.
    If you like: immediately after the problem is worked around, open the Console utility to see whether — amongst its view of all messages — there is an obvious sign of what caused the dialogue to appear. (If you see nothing obvious, don't waste too much time looking.)

  • I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram.  Will I be able to run Lighroom 5 if I upgrade from Snow Leopard to Lion?

    I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram.  Will I be able to run Lightroom 5 okay if I upgrade from Snow Leopard to Lion?  What will happen to the applications that aren't 64-bit compatible?  Also the Eye-one Display 2 colorimeter to calibrate the monitor will not run on Lion, so that will be an expensive upgrade to an i1DisplayPro. Is the upgrade important enough to offset the expense?  I have an Epson R2000 printer.  Will there be problems with the drivers if I upgrade to Lion?  It would be great to hear from other mac users who are also photographers and who print their own photos.    

    Before upgrading to Lion be sure to read this link:
    https://discussions.apple.com/docs/DOC-6271
    Adobe lists these requirements:
    http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
    Looking at http://www.everymac.com/ even the earliest 2008 iMac was fully 64 bit, even though Boot Camp doesn't support 64 bit Windows on that machine.

  • Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

    Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

    My existing movies are all the following types straight from FinalCut
    Apple Intermediate Codec, 1920 × 1080, Millions
    16-bit Integer (Little Endian), Stereo, 48.000 kHz
    This particular movie is 6.66 Gb
    The new Quicktime player in OS Mavericks converts these to the following format:
    Apple ProRes 422, 1920 x 1080
    Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
    And a movie size of 6.48 Gb
    Please, please can someone tell me why?

  • Mail issues when upgrading from Snow Leopard to Lion

    Hello,
    I'm hoping someone out there may be able to answer this question or offer some advice. I am being prompted by Apple to move over to iCloud which requires me upgrading from Snow Leopard to Lion. I am extremely reluctant to do this as I have heard of problems when migrating to Lion, especially with Mail. I presently have over 30,000 emails in my inbox. These mails are divided into a multitude of folders all on my mac. I have a mac email account along with other non Apple email accounts (POP) on my Mac. These emails and the folder structure are fundamental to my work so losing any emails or even the folder structure would be disastrous for me. I have of course made a backup (2 in fact) but do like the idea of trying to rebuild everything from scratch. Any advice would be greatly welcomed. Thanks.

    I'm no expert but at the moment I just woudn't do it as there appears to be lots of unexplained problems with mail and Lion. I have been a Mac user from the earliest days and have never ever had the kinds of problems I am currently having to work around since installing Lion. I wish I had stayed with Snow Leopard.

  • ICal Duplicate Events After Upgrading to Snow Leopard

    After upgrading to Snow Leopard, I noticed almost all my Events were duplicated. The Duplicates were collected from all calendars and are in one of the Calendars (Paul Events). Strangely a new Calendar (Paul Events 2) was created, but deleting this Calendar did not help. Additionally a previously deleted Calendar from months ago was re installed.
    I have a MobileMe account that syncs automatically.
    Did this happen to anyone else. I am still developing a solution to get rid of the duplicate events, but don't have one yet.

    A lot of Duplicate Events, too.
    After the Snow Leopard upgrade, performed 10/19/09, and the immediate update to OSX 10.6.1, I wanted to sync my iPod Touch 2G.
    I was notified I had 67 iCal events to add, and 18 more modified events (85 total -- (a lot of birthdays). All were duplicates. I didn't sync. Is there any way to delete them?
    Also, over the past 18 months of MBP ownership, my alarms for each event have increased to about 8 (they sound once, but I have to clear each of them on my computer screen), And my Contact notes, have doubled+ (as if Copy + Paste were used), with many spaces, and some of the information lost.
    I was hoping for a Contacts & Calendar that would match the stability of my retired Windows Mobile Dell Axim X50v, before it took a virus, spread it to my Gateway desktop, completely destroying it (the desktop is NO MORE (couldn't be fixed) and I've retired the Axim).
    What is the solution?

  • Macbook Pro keeps on rebooting after upgrade from Snow Leopard to Mavericks.

    After I upgraded from Snow Leopard to Mavericks, my early 2010 MBP keeps on rebooting after 30 secs when it's connected to LAN/WIFI. But when it's not connected to any internet source it works fine. Please help.

    After I upgraded from Snow Leopard to Mavericks, my early 2010 MBP keeps on rebooting after 30 secs when it's connected to LAN/WIFI. But when it's not connected to any internet source it works fine. Please help.

  • Mail folders missing after upgrading from snow leopard to mavericks.

    I seem to have lost my mail folders after the upgrade from Snow Leopard to Mavericks.
    Are they hidden? if not is there any way to recover them from TimeMachine?
    thanks

    sorry, I found them: by clicking "On my Mac" - show.

  • Print booklet fails after upgrade to Snow Leopard

    After upgrading to Snow Leopard I had to reinstall the driver for my HP 4000N printer. Now all of my booklets print with the right side truncated in the middle as if the paper were 8-1/2 x 8-1/2 instead of 11 inches wide. The InDesign preview shows it correctly. It printed fine yesterday in OS X 10.5, InDesign CS3. Does anyone have advice?

    I did a clean install of Snow Leopard on a new disk and InDesign has the same problem of clipping a landscape layout booklet.
    I bought a new HP Laserjet and it has the same problem.
    I downloaded a trial version of InDesign CS5 on the new system with the new printer and it has the same problem.
    InDesign just thinks the paper is only 8-1/2" wide in the Print Booklet procedure and it clips the printing at 8-1/2". It will print a normal landscape page fine. It shows the Preview of the booklet correctly. I can save the booklet as a PostScript file and Preview will print it fine. I've been printing the same booklet under 10.5 for several years without problem.
    InDesign just won't print the booklet correclty under Snow Leopard.

Maybe you are looking for

  • Same issue, can't sync mail to iCloud.

    unable to sync Mail with iCloud even after following all support options available online. 

  • Is this a bug for CTI Toolkit Agent desktop (Version 7.5.10510)

    Hi, Today I have found a strange thing with CTI Toolkit Agent desktop (Version 7.5.10510). One agent is logged in on CTI Toolkit agent desktop with his Agent ID (5101) to an extension 999111. Then from other PC another agent is also able to login on

  • Drop Shadow Not Usable

    I'm new to Illustrator and trying to simply just add a drop shadow to some various texts. It would seem to me that when you enter text, all you would have to do is highlight and the drop shadow option should be functional. However, that's not the cas

  • Please Help.SAP BOBJ Requirement-WEBI

    Hi Users, I have a requirement from my client. Current situation is that we have data load happening from flat files to R/3 Tables and then we Universe as SEMANTIC layer on these tables on which we have build WEBI reports. Now Client wants to build I

  • IPad can't view photos from Aperture?

    I'm not new at any of this but can't for the life of me figure this one out.... I might take this post to the Aperture discussions, but it involves the iPad. so I want to try this community as well. I imported my images, ran my workflow and went to s