ICal sending multiple invites for one event

I have an mixed environment where my Mac users running OSX 10.6.4 sync with our MS Exchange 07 using Mail 4.3 and iCal 4.0.3 . Everything is syncing correctly between the two environments, but we have run in to an annoying snag.
We have multiple users that have Read/Write Access to multiple calendars. Whenever somebody creates an event on one these calendars, even if the user is not an invitee they receive an email notification. The notification is on behalf of the calendar that the event was created for. If the user is an invitee they then receive 2 invites for the same event. This only happens with users who have Read/Write access to these calendars
I have searched high and low and can not find anybody that has the same issue as I do. Any assistance or advice in how to make so that users with Read/Write access only receive notifications to events they are invited to would be greatly appreciated. Thank you all for your time!
Cheers,
Nic Young

I think I know what can help. I also support Mac users in a mixed environment, and find that being able to access a Windows machine to test settings for my iCal users is very very helpful. If you do not have one, I could also fix this one by adding the user's account to my one Mac that runs Entourage.
On a PC: set up one of the problem accounts in Outlook, then go to Tools->Options & click on the Delegates tab. Click on a Delegate name (if they all have the same permission level, you can select all), then click the Permissions button. If the delegate have "Editor" permissions, there will be a little checked box that sends the delegate copies of all those meetings. De-select it.
Lemme know if you want Entourage instructions or if that does it for you.
The real question, of course, is why are there so many Exchange functions that iCal can't touch. Grrrr....

Similar Messages

How do I set up multiple alerts for one event?

So, I'm currently using MS Exchange to sync my google calendar with my iphone5, and almost everything's working pretty nicely, events would get pushed to my phone right away as I put it on my computer. But the thing is, my phone will only alert me for the earliest alert if I had multiple alerts set up for one event on google calendar. How can I fix it? Any advice would be appreciated!

I have a similar issue with a slight twist.
I have 'My Card' setup properly, however, I do have 5 email addresses that I use and these are listed on 'My Card'. When I select the option to add an email alert on a calendar event, the app is picking up two addresses from the set of 5 and makes me pick one.
I would like to select one of the other addresses to be the default for sending out the alerts. Is there a way to do that. If it is helpful, the app is picking up 2 of the 'Work' email addresses. I don't know if the home vs work designation would make a difference.
Note: I am looking for a solution to pick one a specific address from the contact card to send out the alert email. I am NOT looking to have a discussion as to why I have 5 addresses.
Thanks

Multiple places for one event

Hi, does anybody know if it is possible to add multiple locations to one event in iPhoto? Thanks in advance.

You can only assign directly one location to each event, but each photo in the event may be assigned to an individual location. When you display the event in places you will see all the different locations.

ICal sends multiple emails for invites and updates to event attendees - HELP!

Every time I create or send an event in iCal, it sends multiple emails to each attendee (2-3 duplicate emails) with the same event. So if I have 3 event invitees, they get 3 emails each. All the emails are sent from the correct account in Apple Mail, and the calendar itself shows only one email address for each attendee, but for some reason the sent folder shows that each person was emailed 2-3 times. This is causing quite a problem for work, as any invite I send is clogging up inboxes with duplicate and triplicates for each attendee.
When I send a meeting acceptance, it only sends one reply, so I have no idea why it's duplicating or triplicating events when new ones are sent out or udpated by me. I can't delete my calendar without losing important events from clients or what not, so I'm not sure what to do.
Also notable:
I am NOT using iCloud calendars as I needed to create a calendar group and iCloud didn't support that.
My calendar is syncing to an FTP so that people in my main office can view and download my calendar as needed.
I am on a brand new (not even 2 mos old) MacBook Pro Retina 2013 model, with OS X 10.8.3
I am on Calendar 6.0
I can't change/update events on my calendar from one sub-calendar to another once they are created (though I can edit on my iPhone and resync). This is really annoying and I've posted about this before to no avail (thread here: https://discussions.apple.com/message/21646850#21646850 and here: https://discussions.apple.com/thread/3920017?start=0&tstart=0).
For now (for this thread) I'd like any help possible in getting my calendar to send just ONE email to meeting attendees when I create and/or update an event.
Thanks!

I have the same issue. Did you get a resolution to this? Whenever I add a new person to the meeting invite iCal always resends the entire invite...it should just send the invite to newly added participants.

Syncing ical creates multiple entries for same event

I'm sure this is common. I cal sync creates multiple enties for the same event. Any way to work around this?
Also, duplicate calendars are on the Iphone (2 for inbox) can one be deleted?

I think I know what can help. I also support Mac users in a mixed environment, and find that being able to access a Windows machine to test settings for my iCal users is very very helpful. If you do not have one, I could also fix this one by adding the user's account to my one Mac that runs Entourage.
On a PC: set up one of the problem accounts in Outlook, then go to Tools->Options & click on the Delegates tab. Click on a Delegate name (if they all have the same permission level, you can select all), then click the Permissions button. If the delegate have "Editor" permissions, there will be a little checked box that sends the delegate copies of all those meetings. De-select it.
Lemme know if you want Entourage instructions or if that does it for you.
The real question, of course, is why are there so many Exchange functions that iCal can't touch. Grrrr....

Users sends multiple emails for one email to be received

I have a user who states that she has to send multiple emails to a customer before she one is able to get through. She doesn't receive a bounce back from them. I recently suggested she remove an images from the emails, we have a corporate logo
that can be used in our signatures, as many of her customers are government and I figured they may be blocking the emails for this reason. Nothing seems to have helped and she still seems to be having the issue. This also occurs sometimes for some
of her customers and other times with others, so it doesn't seem specific to the customer. I have repaired Office and run a virus scan, the scan came up with minimal malware and removed it.

Hi,
Please follow these steps to create a test email in Outlook and send out:
1. Open Outlook, click New Email.
2. In the new window, edit To and Subject fields.
3. Click OPTION, check Request a Delivery Receipt.
4. Then click Send to send the test message.
Please check whether the test message is listed in the Sent Items folder or not. Also waiting for the Delivery Report of this message.
Thanks,
Winnie Liang
TechNet Community Support

ICal in Mavericks - Still sending multiple invites for adding additional invitees

So is there an answer to this problem?
How do I add people to a meeting without sending out a mass update to all the prior invitees?
Similarly, on my iphone I have accidentally held down the invite and dragged it to a new time...it immediately auto-sends out a new invite...then when I moved it back, it sent out another invite. So the poor attendees get like 3 re-invites to the same meeting for a simple mistake on my side that they should never see.
WHERE IS THE OPTION ASKING "WOULD YOU LIKE TO RESEND THIS TO ALL CURRENT ATTENDEES?" (with a yes and no check box)

iCal
http://www.apple.com/support/ical

SharePoint 2013 - SPD Custom Workflow keeps sending multiple emails for a single Task

I have a workflow triggering on List item created only. There are multiple stages in the work flow and in each stage a single task is assigned to a group of people. Currently group is only having one user i.e. my own test user with a valid email address.
Workflow was running fine for first 5 runs but now it keeps sending multiple emails for each task multiple times and runs very slow. I have only single workflow in development server with 24GB RAM.
Enabling the Workflow log in Event viewer does not show any error or warnings. The only clue I see is WorkFlowManager Database table "DebugTrace" having multiple entries showing that WF is trying to send same email multiple times with failed attempts,
but in reality emails are being delivered as well.
http://server/site/_vti_bin/client.svc/sp.utilities.utility.SendEmail Retry sending email in xx.xx.xx Status: HTTPRetrying
http://server/site/_vti_bin/client.svc/sp.utilities.utility.SendEmail Retry sending email in xx.xx.xx Status: HTTPFailed
I could not get the exact phrase as I don't have direct access to development machine at work.
Any help or guidance will be highly appreciated.

Yes, I have on-premise SP site, and here is the actual log I see in DebugTraces table.
Message              Level     Name    Category
Attempt 1 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
No Status Code>'.              2              HttpRequestFailed          Http
Attempt 2 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:06.
2              HttpRequestRetrying     Http
Attempt 2 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
No Status Code>'.              2              HttpRequestFailed          Http
Attempt 3 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:07.
2              HttpRequestRetrying     Http
Attempt 3 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
No Status Code>'.              2              HttpRequestFailed          Http
Attempt 4 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:09.
2              HttpRequestRetrying     Http
Attempt 4 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
No Status Code>'.              2              HttpRequestFailed          Http
Attempt 5 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:13.
2              HttpRequestRetrying     Http

Can I send multiple photos on one e mail.

As the title says. Is it possible to send multiple photos on one e mail and if so how?
Many thanks.

There isn't an option for it.

Can you have multiple users for one account?

Can you have multiple users for one account? if so how do you set it up.
We are using it for our department and it would be great to see who created what form instead of it being all one name.

Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
More information on how to share :
http://forums.adobe.com/docs/DOC-2462
Information on how to copy a forms to a different account :
http://forums.adobe.com/docs/DOC-1390
Hope this helps
Gen

How do i scan multiple pages for one attachment

I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to send multiple data for a single element

Hi All,
I have a requirement where I have to send multiple data for single element per single transaction. For example
Id details
1 abcd
1 efgh
1 def
Now, when I am selecting this ID from database, I have to get all the details in a single xsd like
<id>1</id>
---><details>abcd</details>
<details>efgh</details>
<details>def</details>
Thanks

Hi,
The following XSLT...
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:template match="/">
<xsl:variable name="root" select="/"/>
<root>
<xsl:for-each select="distinct-values(/root/entry/id)">
<xsl:variable name="id" select="."/>
<entry>
<id><xsl:value-of select="$id"/></id>
<xsl:for-each select="$root/root/entry[id = $id]">
<details><xsl:value-of select="details"/></details>
</xsl:for-each>
</entry>
</xsl:for-each>
</root>
</xsl:template>
</xsl:stylesheet>Will work for a document like this...
<root>
<entry>
<id>1</id>
<details>detail1</details>
</entry>
<entry>
<id>1</id>
<details>detail2</details>
</entry>
<entry>
<id>2</id>
<details>detail3</details>
</entry>
</root>Hope this helps...
Cheers,
Vlad

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

Not Working-LexicalParamater used to send multiple values with one prameter

Hi,
I am calling a reportname.rdf from the web(using apache webserver and url as follows:
http://localhost/cgi-bin/rwcgi60.exe?server=reportservername&report=acctActivity.rdf&userid=bizsystest/[email protected]&destype=cache&desformat=pdf&placeholdercolumnname='2,3,4'&docid=2
I have to send multiple values for fundid.
To accomplish this,
I created a placeholder column and initialized the value '0' and type taken as character(even though datatype of this column is number).
In sql query
select table1.c1, table2.c2 from table1, table2, table3, table4 where table1.cl in (&placeholdercolumname)
and table1.c2 = table2.c2(+)
and table3.doccode = :docid
From Web, URL contains the placeholdercolumnnmae='2,3,4'
Still its taking the value zero and output is generating.
Its not taking my newvalues ('2,3,4') in IN parameter.
I donot know the reason, where exactly is wrong.
Please help me to resolve.
2. My Second Issue:
Is there anyway, can we hide all key/value parameters send through the URL not visible to endusers
like servername, database userid and password and configure some where, so system can pickup each time when I run report.
Please help me to resolve.
Thanks,
Usha.

Hi Usha,
First of all, I assume that the place holder column you have specified is a UserParameter which you have specified on the command line. I don't think there is any direct way of doing that.
I created a placeholder column and initialized the value '0' and type taken as character(even though datatype of this column is number). If I infer correctly from what you are saying, you can't mix and match the datatypes of the columns, you can't define the parameter as a number and pass characters. I suggest you declare your parameter as a character with sufficient width to hold your LOV and then process them convert them to numbers.
Another suggestion is try replacing your "Placeholder" with another query construct.
For your Second issue,
You can use the Key-Map file Oracle Reports provides for the Web client. Please refer to
<ORACLE_HOME>\Report60\server\cgicmd.dat.
In the cgicmd.dat,you can alias your entire commandline with a single key and use that key in your URL.
Regards
Oracle Reports Team.

ICal sending multiple invites for one event

Similar Messages

Maybe you are looking for