Ical subscriber will not refresh

Hello All,
I have several calendars published using my .mac account and most of the systems in my office are subscribed and are refreshing (auto or manual) and working fine. However, I have two systems that are subscribed but will not refresh and update the events.
I am getting no errors, exclamations, spinning beach ball. They just will not refresh. I even went through and re-subscribed and still nothing.
All systems are running OSX10.4.2 and the latest version of ical. All systems have full, high speed internet connections and the network is working great on them.
Thanks for the help!
Chad

Hi,
Tell me, what happens when your parents manually refresh? Do the little red exclamation marks come on?
I recently changed the password on my webDAV server, and even though my wife changed it when signing in, it worked only for one session. On a new refresh, iCal looked up the old password and the little red exclamation marks came on.
I eventually traced the problem to ‘keychain’ (/Application/Utilities/keychain access), deleted the old passwords, and re-subscribed all the relevant calendars. Now it works again...
Cheers,
Klaus

Similar Messages

Upgraded ZENworks Primary Server Will Not Refresh

Good Afternoon,
I recently upgraded our primary server from ZENworks 11.2-11.3a.
The upgrade procedure completed with no errors. However, the server will not refresh it's status in the ZENworks Control Center. Control Center continues to report the server as 11.2.0.0. The UI of the Control Center is upgraded. The agent continues to push back the next contact with server time without updating the last contact with server time
Things I have tried:
-doing a manual refresh through control center gives a "Connection Failed" error
-doing a manual refresh with zac ref completes successfully but does not update anything
-cleared the agent cache using zac cc
Any help would be appreciated.
Thank you very much!

Try the solution you find in this thread:
http://forums.novell.com/novell-prod...nt-management/
zenworks/configuration-management/zcm-11/zcm11-agent-deployment-linux/45
5516-how-recover-lost-trust-relationship-zone-configuration-between-linu
x-zcm-agent-primary-zone-server-running-same-machine.html
W. Prindl
wpico wrote:
>
>CRAIGDWILSON;2331318 Wrote:
>> This is because the Agent Service (Servers have an agent too)
>>cannot talk to the zone.
>>
>> Normally the only time this is noticed is during a "System Update",
>> since this is one of the few times the failure would be noted.
>>
>> However, the 11.3.0 Upgrade would not have relied on the agent
>>server and since you upgraded from 11.2.0, another ISO install, it
>>is quite possible there were always some issues there.
>>
>> "zac retr" might help, but it also may be wise to open an SR so
>>they can
>> see what is wrong and not just have you poking and prodding your
>>only primary.
>>
>>
>> On 8/28/2014 4:46 PM, wpico wrote:
>> >
>> > nop1983;2331309 Wrote:
>> >> wpico wrote:
>> >>
>> >>>
>> >>> Good Afternoon,
>> >>>
>> >>> I recently upgraded our primary server from ZENworks
>>11.2-11.3a. >>>
>> >>> The upgrade procedure completed with no errors. However, the
>> server
>> >>> will not refresh it's status in the ZENworks Control Center.
>> Control
>> >>> Center continues to report the server as 11.2.0.0. The UI of
>>the >>> Control Center is upgraded. The agent continues to push
>>back the next
>> >>> contact with server time without updating the last contact with
>> server
>> >>> time
>> >>>
>> >>> Things I have tried:
>> >>> -doing a manual refresh through control center gives a
>>"Connection >>> Failed" error
>> >>> -doing a manual refresh with zac ref completes successfully but
>> does
>> >>> not update anything
>> >>> -cleared the agent cache using zac cc
>> >>>
>> >>> Any help would be appreciated.
>> >>>
>> >>> Thank you very much!
>> >>
>> >> Only one server?
>> >> Sounds like the agent could have lost the trust, somehow... The
>> update
>> >> went fine?
>> >>
>> >> --
>> >> Niels
>> >> I have always liked... Cowabunga!
>> >>
>> >> If you find this post helpful, please show your appreciation by
>> clicking
>> >> on the star below.
>> >> A member must be logged in before s/he can assign reputation
>>points. >
>> > Completed with no errors, The log file was all green.
>> >
>> >
>>
>>
>> --
>> Going to Brainshare 2014?
>> http://www.brainshare.com
>> Use Registration Code "nvlcwilson" for $300 off!
>>
>>
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Technical Support Engineer
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>>human.
>
>When I run zac retr I get, "Failed to re-establish trust with zone"

The iCal upgrading will not stop and I do not know how to quit it...help!

The iCal upgrading will not stop and I do not know how to quit it...please help!

Best thing to do is post in the iCal forum:
https://discussions.apple.com/community/applications/ical

When I resume my laptop from sleep/hiberante, firefox is hung. It will prompt me with a dialog when I quit, so it is still running, but the page display is blank and will not refresh. I noticed this since about beta 7

Firefox is running when my laptop comes out of system standby, but the page that was displaying when the laptop went into sleep mode is now a white canvas that does not refresh.
The application is not hung, because I get prompted to save tabs when I quit, but for some reason, I can't prompt Firefox into refreshing the screen.
I'm running Firefox on a Thinkpad T400 which has Intel 4 series Express integrated Graphics.

This also happened if the network adapter is disabled then enabled. My computer is Windows 7 x64. Firefox needs to be killed from taskman before it will load a new instance of the application. I can also reproduce with all add-ons disabled.

ICal server will not work

I am running a small network on a MacPro running OS X server 10.5.4 with 2 mac clients and 2 windows clients. The OS X server was installed by an apple specialist but it is still not working properly and I find it hard to believe that it is a bug is the software as it seems to be a fundamental problem which most people would have encountered.
Each user has their home directories stored on a separate drive on the server and iCal server is running. However, when a Mac client logs into the network they iCal does not work properly. It either will not show any calendars or if it does then a new event cannot be entered.
Below is an extract from the client message log from rebooting the machine. The first problems with iCal seem to occur at 1:20:48:
9/5/08 1:19:34 PM kernel npvhash=4095
9/5/08 1:19:30 PM com.apple.launchctl.System[2] fsck_hfs: Volume is journaled. No checking performed.
9/5/08 1:19:30 PM com.apple.launchctl.System[2] fsck_hfs: Use the -f option to force checking.
9/5/08 1:19:33 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
9/5/08 1:19:33 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
9/5/08 1:19:33 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
9/5/08 1:19:34 PM DirectoryService[11] Launched version 5.4 (v514.21)
9/5/08 1:19:35 PM kernel hi mem tramps at 0xffe00000
9/5/08 1:19:34 PM DirectoryService[11] Improper shutdown detected
9/5/08 1:19:35 PM kernel PAE enabled
9/5/08 1:19:34 PM kextd[10] 404 cached, 0 uncached personalities to catalog
9/5/08 1:19:35 PM kernel 64 bit mode enabled
9/5/08 1:19:35 PM kernel Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
9/5/08 1:19:35 PM kernel standard timeslicing quantum is 10000 us
9/5/08 1:19:35 PM kernel vmpagebootstrap: 508582 free pages and 15706 wired pages
9/5/08 1:19:35 PM kernel migtable_maxdispl = 79
9/5/08 1:19:35 PM kernel 91 prelinked modules
9/5/08 1:19:35 PM kernel AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
9/5/08 1:19:35 PM kernel AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
9/5/08 1:19:35 PM kernel Loading security extension com.apple.security.TMSafetyNet
9/5/08 1:19:35 PM kernel calling mpopolicyinit for TMSafetyNet
9/5/08 1:19:35 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
9/5/08 1:19:35 PM kernel Loading security extension com.apple.nke.applicationfirewall
9/5/08 1:19:35 PM kernel Loading security extension com.apple.security.seatbelt
9/5/08 1:19:35 PM kernel calling mpopolicyinit for mb
9/5/08 1:19:35 PM kernel Seatbelt MACF policy initialized
9/5/08 1:19:35 PM kernel Security policy loaded: Seatbelt Policy (mb)
9/5/08 1:19:35 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
9/5/08 1:19:35 PM kernel The Regents of the University of California. All rights reserved.
9/5/08 1:19:35 PM kernel MAC Framework successfully initialized
9/5/08 1:19:35 PM kernel using 10485 buffer headers and 4096 cluster IO buffer headers
9/5/08 1:19:35 PM kernel devfsmakenode: not ready for devices!
9/5/08 1:19:35 PM kernel IOAPIC: Version 0x20 Vectors 64:87
9/5/08 1:19:35 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
9/5/08 1:19:35 PM kernel mbinit: done
9/5/08 1:19:35 PM kernel Security auditing service present
9/5/08 1:19:35 PM kernel BSM auditing present
9/5/08 1:19:35 PM kernel rooting via boot-uuid from /chosen: 033560DC-0859-35E9-B64E-FE25488D5DD8
9/5/08 1:19:35 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
9/5/08 1:19:35 PM kernel AppleYukon2: 532111ab,00000000 sk98osx_dnet - CheckDictionaryEntry failed, expected vs. dictionary
9/5/08 1:19:35 PM kernel FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001e52fffe510454; max speed s400.
9/5/08 1:19:35 PM kernel CSRHIDTransitionDriver::start []
9/5/08 1:19:35 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/Hitachi HTS541612J9SA00 Media/IOGUIDPartitionScheme/Customer@2
9/5/08 1:19:35 PM kernel BSD root: disk0s2, major 14, minor 2
9/5/08 1:19:35 PM kernel jnl: unknown-dev: replay_journal: from: 13329408 to: 15447040 (joffset 0x11f02000)
9/5/08 1:19:35 PM kernel CSRHIDTransitionDriver::switchToHCIMode legacy
9/5/08 1:19:35 PM kernel jnl: unknown-dev: journal replay done.
9/5/08 1:19:35 PM kernel HFS: Removed 5 orphaned unlinked files or directories
9/5/08 1:19:35 PM kernel Jettisoning kernel linker.
9/5/08 1:19:35 PM kernel Resetting IOCatalogue.
9/5/08 1:19:35 PM kernel GFX0: family specific matching fails
9/5/08 1:19:35 PM kernel display: family specific matching fails
9/5/08 1:19:35 PM kernel Matching service count = 1
9/5/08 1:19:35 PM kernel Matching service count = 3
9/5/08 1:19:35 PM kernel Matching service count = 3
9/5/08 1:19:35 PM kernel Matching service count = 3
9/5/08 1:19:35 PM kernel Matching service count = 3
9/5/08 1:19:35 PM kernel Matching service count = 3
9/5/08 1:19:35 PM kernel display: family specific matching fails
9/5/08 1:19:35 PM kernel Previous Shutdown Cause: 0
9/5/08 1:19:35 PM kernel GFX0: family specific matching fails
9/5/08 1:19:35 PM kernel ath_attach: devid 0x1c
9/5/08 1:19:35 PM kernel yukon: Ethernet address 00:16:cb:ad:ea:bb
9/5/08 1:19:36 PM kernel mac 10.3 phy 6.1 radio 10.2
9/5/08 1:19:36 PM kernel USBF: 11.740 AppleUSBHubPort: Port 1 of Hub at 0x7d000000 about to terminate a busy device (IOUSBCompositeDevice) after waiting 10 seconds
9/5/08 1:19:36 PM kernel USBF: 12. 41 CSRHIDTransitionDriver[0x3dcb680](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
9/5/08 1:19:36 PM kernel CSRHIDTransitionDriver... done
9/5/08 1:19:37 PM mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[16] starting
9/5/08 1:19:38 PM configd[14] Error: No interface name for AirPort_Athr5424ab
9/5/08 1:19:38 PM configd[14] Error: ioPublishedDriverCallback() failed to initDeviceFromService()
9/5/08 1:19:38 PM fseventsd[38] event logs in /.fseventsd out of sync with volume. destroying old logs. (215919 13 231722)
9/5/08 1:19:38 PM fseventsd[38] log dir: /.fseventsd getting new uuid: 01610E3D-7144-4D13-84C5-AD0B5AA2A76F
9/5/08 1:19:44 PM rpc.statd[29] statd.notify - no notifications needed
9/5/08 1:19:45 PM bootlog[45] BOOT_TIME: 1220617164 0
9/5/08 1:19:46 PM kextd[10] writing kernel link data to /var/run/mach.sym
9/5/08 1:19:47 PM VMware Fusion 72241[58] Starting VMware Fusion:
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] VMware Fusion 72241: Starting VMware Fusion:
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmmon.kext loaded successfully
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmci.kext loaded successfully
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmioplug.kext loaded successfully
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmnet.kext loaded successfully
9/5/08 1:19:47 PM kernel vmmon: Loaded @ 0x4bcbe000: Info 0x4bccb500 Name com.vmware.kext.vmx86 Version 1.1.1fc2 build-72241 at Jan 16 2008 21:26:45
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Internet Software Consortium DHCP Server 2.0
9/5/08 1:19:47 PM kernel vmmon: Service start
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] All rights reserved.
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Please contribute if you find this software useful.
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] For info, please visit http://www.****.***/****-contrib.html
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Configured subnet: 192.168.91.0
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Setting vmnet-dhcp IP address: 192.168.91.254
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Opened:
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Recving on VNet/vmnet8/192.168.91.0
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Sending on VNet/vmnet8/192.168.91.0
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Internet Software Consortium DHCP Server 2.0
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] All rights reserved.
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Please contribute if you find this software useful.
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] For info, please visit http://www.****.***/****.html
9/5/08 1:19:47 PM kernel vmmon: Instrumenting bug 151304 without page information...
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Configured subnet: 192.168.164.0
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Setting vmnet-dhcp IP address: 192.168.164.254
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Opened:
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Recving on VNet/vmnet1/192.168.164.0
9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Sending on VNet/vmnet1/192.168.164.0
9/5/08 1:19:47 PM kernel vmmon: Fast clock thread started.
9/5/08 1:19:47 PM kernel vmmon: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
9/5/08 1:19:47 PM kernel vmmon: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
9/5/08 1:19:47 PM kernel vmmon: Module initialized.
9/5/08 1:19:47 PM kernel vmmon: Registering for power state changes
9/5/08 1:19:47 PM kernel vmci: Initializing module.
9/5/08 1:19:47 PM kernel vmci: VMCI: Driver initialized.
9/5/08 1:19:47 PM kernel vmci: Module initialized.
9/5/08 1:19:47 PM kernel vmnet: Initializing module (version 1.1.1fc2, build-72241).
9/5/08 1:19:47 PM kernel vmnet: VMNet_Start allocated gOSMallocTag
9/5/08 1:19:47 PM kernel vmnet: Module initialized.
9/5/08 1:19:47 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x43b8100.
9/5/08 1:19:47 PM kernel vmnet: VMNetConnect: returning port 0x43b8100
9/5/08 1:19:47 PM kernel vmnet: Hub 8 does not exist, allocating memory.
9/5/08 1:19:47 PM kernel vmnet: Allocated hub 0x445d800 for hubNum 8.
9/5/08 1:19:47 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:e5:c6:b8
9/5/08 1:19:47 PM kernel vmnet: Hub 8
9/5/08 1:19:47 PM kernel vmnet: Port 0
9/5/08 1:19:47 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x4480e00.
9/5/08 1:19:47 PM kernel vmnet: VMNetConnect: returning port 0x4480e00
9/5/08 1:19:47 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:e4:8c:c0
9/5/08 1:19:47 PM kernel vmnet: Hub 8
9/5/08 1:19:47 PM kernel vmnet: Port 0
9/5/08 1:19:47 PM kernel vmnet: Port 1
9/5/08 1:19:47 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x4480c00.
9/5/08 1:19:47 PM kernel vmnet: VMNetConnect: returning port 0x4480c00
9/5/08 1:19:47 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:ff:08:cc
9/5/08 1:19:47 PM kernel vmnet: Hub 8
9/5/08 1:19:47 PM kernel vmnet: Port 0
9/5/08 1:19:47 PM kernel vmnet: Port 1
9/5/08 1:19:47 PM kernel vmnet: Port 2
9/5/08 1:19:47 PM kernel vmnet: VNetUserIfFree: freeing userIf at 0x4480c00.
9/5/08 1:19:47 PM kernel vmnet: netif-vmnet8: Adding protocol 2.
9/5/08 1:19:47 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x4480a00.
9/5/08 1:19:47 PM kernel vmnet: VMNetConnect: returning port 0x4480a00
9/5/08 1:19:47 PM kernel vmnet: Hub 1 does not exist, allocating memory.
9/5/08 1:19:47 PM kernel vmnet: Allocated hub 0x448b800 for hubNum 1.
9/5/08 1:19:47 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:eb:03:38
9/5/08 1:19:48 PM kernel vmnet: Hub 1
9/5/08 1:19:48 PM kernel vmnet: Port 0
9/5/08 1:19:48 PM kernel vmnet: VNetUserIfFree: freeing userIf at 0x4480a00.
9/5/08 1:19:48 PM kernel vmnet: netif-vmnet1: Adding protocol 2.
9/5/08 1:19:48 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x4480800.
9/5/08 1:19:48 PM kernel vmnet: VMNetConnect: returning port 0x4480800
9/5/08 1:19:48 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:f3:c2:e0
9/5/08 1:19:48 PM kernel vmnet: Hub 1
9/5/08 1:19:48 PM kernel vmnet: Port 0
9/5/08 1:19:48 PM kernel vmnet: Port 1
9/5/08 1:19:48 PM /usr/sbin/ocspd[85] starting
9/5/08 1:19:48 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[33] Login Window Application Started
9/5/08 1:19:48 PM /System/Library/CoreServices/rapserver.app/Contents/MacOS/rapserverd[25] RAP: Starting, pid=25
9/5/08 1:19:48 PM /System/Library/CoreServices/rapserver.app/Contents/MacOS/rapserverd[25] RAP: Started, pid=25, port=4073
9/5/08 1:19:50 PM kernel AirPort_Athr5424ab: Ethernet address 00:1c:b3:b2:46:95
9/5/08 1:19:51 PM kernel display: Not usable
9/5/08 1:19:50 PM mDNSResponder[16] Adding registration domain paul\.dyson.members.mac.com.
9/5/08 1:19:50 PM mDNSResponder[16] Adding registration domain paul\.dyson.members.mac.com.
9/5/08 1:19:51 PM configd[14] setting hostname to "Media-Mac-mini.local"
9/5/08 1:19:51 PM airportd[90] No networks found on channels remembered for belkin54g
9/5/08 1:19:51 PM airportd[90] Could not find "belkin54g"
9/5/08 1:19:51 PM airportd[90] Could not find any preferred networks; trying broadcast requests..
9/5/08 1:19:51 PM ARDAgent [96] ******ARDAgent Launched******
9/5/08 1:19:51 PM loginwindow[33] Login Window Started Security Agent
9/5/08 1:19:52 PM mDNSResponder[16] registerserviceinstance: domain paul\.dyson.members.mac.com. already registered
9/5/08 1:19:53 PM ARDAgent [96] ******ARDAgent Ready******
9/5/08 1:19:54 PM airportd[90] Broadcast requests also failed..
9/5/08 1:19:55 PM com.apple.SystemStarter[27] iCal Server Launched!
9/5/08 1:19:55 PM org.ntp.ntpd[24] Error : nodename nor servname provided, or not known
9/5/08 1:19:55 PM ntpdate[108] can't find host time.euro.apple.com
9/5/08 1:19:55 PM com.apple.SystemStarter[27] Loading VirusBarrier Service
9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: extension /Library/StartupItems/VirusBarrier/VirusBarrierService.kext appears to be loadable
9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: loading extension /Library/StartupItems/VirusBarrier/VirusBarrierService.kext
9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: /Library/StartupItems/VirusBarrier/VirusBarrierService.kext loaded successfully
9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: sending personalities to kernel:
9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: from extension /Library/StartupItems/VirusBarrier/VirusBarrierService.kext:
9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: ScannerService
9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: sending 1 personality to the kernel
9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: matching started for /Library/StartupItems/VirusBarrier/VirusBarrierService.kext
9/5/08 1:19:55 PM ntpdate[108] no servers can be used, exiting
9/5/08 1:19:55 PM airportd[90] Probing highest ranked networks via directed scan..
9/5/08 1:19:58 PM kernel AirPort: Link Up on en1
9/5/08 1:20:03 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x496af00.
9/5/08 1:20:03 PM kernel vmnet: VMNetConnect: returning port 0x496af00
9/5/08 1:20:03 PM kernel vmnet: Hub 0 does not exist, allocating memory.
9/5/08 1:20:03 PM kernel vmnet: Allocated hub 0x496b000 for hubNum 0.
9/5/08 1:20:03 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:ef:00:58
9/5/08 1:20:03 PM kernel vmnet: Hub 0
9/5/08 1:20:03 PM kernel vmnet: Port 0
9/5/08 1:20:03 PM kernel vmnet: bridge-en1: got dev 0x3dc8004
9/5/08 1:20:03 PM kernel vmnet: bridge-en1: wireless interface detected.
9/5/08 1:20:03 PM kernel vmnet: bridge-en1: up
9/5/08 1:20:03 PM kernel vmnet: bridge-en1: attached
9/5/08 1:20:03 PM kernel vmnet: VNetUserIfFree: freeing userIf at 0x496af00.
9/5/08 1:20:05 PM kernel AppleYukon2: error - 2 Pair Downshift detected
9/5/08 1:20:05 PM kernel AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - SKDRV_DOWNSHIFTDET
9/5/08 1:20:05 PM kernel AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
9/5/08 1:20:06 PM kernel vmnet: bridge-en1: interface en is going DOWN
9/5/08 1:20:06 PM airportd[90] Error: Apple80211Associate() failed -6
9/5/08 1:20:07 PM kernel vmnet: VMNetDisconnect called for port 0x4968000
9/5/08 1:20:07 PM kernel vmnet: bridge-en1: filter detached
9/5/08 1:20:07 PM kernel vmnet: bridge-en1: down
9/5/08 1:20:07 PM kernel vmnet: bridge-en1: detached
9/5/08 1:20:07 PM kernel vmnet: Freeing hub at 0x496b000.
9/5/08 1:20:07 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x496aa00.
9/5/08 1:20:07 PM kernel vmnet: VMNetConnect: returning port 0x496aa00
9/5/08 1:20:07 PM kernel vmnet: Hub 0 does not exist, allocating memory.
9/5/08 1:20:07 PM kernel vmnet: Allocated hub 0x496b000 for hubNum 0.
9/5/08 1:20:07 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:ff:a5:00
9/5/08 1:20:07 PM kernel vmnet: Hub 0
9/5/08 1:20:07 PM kernel vmnet: Port 0
9/5/08 1:20:07 PM kernel vmnet: bridge-en0: got dev 0x42b0204
9/5/08 1:20:07 PM kernel vmnet: bridge-en0: up
9/5/08 1:20:07 PM kernel vmnet: bridge-en0: attached
9/5/08 1:20:07 PM kernel vmnet: VNetUserIfFree: freeing userIf at 0x496aa00.
9/5/08 1:20:08 PM mDNSResponderHelper[89] "/etc/racoon/remote/anonymous.conf" looks familiar, will overwrite
9/5/08 1:20:08 PM mDNSResponderHelper[89] racoon (pid=125) started
9/5/08 1:20:10 PM com.apple.KerberosAutoConfig[127] Kerberos configuration is up to date
9/5/08 1:20:12 PM mDNSResponder[16] registerserviceinstance: domain paul\.dyson.members.mac.com. already registered
9/5/08 1:20:12 PM com.apple.KerberosAutoConfig[128] Kerberos configuration is up to date
9/5/08 1:20:12 PM com.apple.KerberosAutoConfig[129] Kerberos configuration is up to date
9/5/08 1:20:26 PM kernel AFP_VFS afpfs_mount: /Network/Servers/server.kennedydyson.co.uk/Volumes/Data/Users, pid 100
9/5/08 1:20:28 PM loginwindow[33] Login Window - Returned from Security Agent
9/5/08 1:20:28 PM loginwindow[33] USER_PROCESS: 33 console
9/5/08 1:20:29 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[97]) Exited: Terminated
9/5/08 1:20:29 PM com.apple.launchd[133] (0x103c10.AppleVNCServer[101]) Failed to add kevent for PID 101. Will unload at MIG return
9/5/08 1:20:29 PM com.apple.familycontrols[132] ** [User findUserByID:1038 searchParent:NO] returned nil
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[148] ** [User findUserByID:1038 searchParent:NO] returned nil
9/5/08 1:20:29 PM com.apple.familycontrols[132] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d: option requires an argument -- n
9/5/08 1:20:29 PM com.apple.familycontrols[132] 'Unknown argument given
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] 'Unknown argument given
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] Usage: /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k start -p <port> -n <username>
9/5/08 1:20:29 PM com.apple.familycontrols[132] Usage: /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k start -p <port> -n <username>
9/5/08 1:20:29 PM com.apple.familycontrols[132] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k stop
9/5/08 1:20:29 PM com.apple.familycontrols[132] Options:
9/5/08 1:20:29 PM com.apple.familycontrols[132] [-X]: do not detach from console
9/5/08 1:20:29 PM com.apple.familycontrols[132] [-v]: verbose
9/5/08 1:20:29 PM com.apple.familycontrols[132] [-l]: create log file
9/5/08 1:20:29 PM com.apple.familycontrols[132] Private:
9/5/08 1:20:29 PM com.apple.familycontrols[132] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k socket <socket_fd> <logfile_fd> -n <username>
9/5/08 1:20:29 PM com.apple.familycontrols[132] ** abnormal termination of /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d (returned: 1)
9/5/08 1:20:29 PM com.apple.familycontrols[132] ** httpsproxystart failed r:1
9/5/08 1:20:31 PM com.apple.launchd[133] (com.apple.ReportPanic[155]) Exited with exit code: 1
9/5/08 1:20:30 PM airportd[90] No networks found on channels remembered for belkin54g
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k stop
9/5/08 1:20:30 PM airportd[90] Could not find "belkin54g"
9/5/08 1:20:31 PM ReportPanic[155] Reading panic log failed with error: Error Domain=NSCocoaErrorDomain Code=257 UserInfo=0x107570 "The file “2008-07-29-160619.panic” could not be opened because you do not have appropriate access privileges."
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] Options:
9/5/08 1:20:30 PM airportd[90] Could not find any preferred networks; trying broadcast requests..
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] [-X]: do not detach from console
9/5/08 1:20:33 PM airportd[90] Broadcast requests also failed..
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] [-v]: verbose
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] [-l]: create log file
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] Private:
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k socket <socket_fd> <logfile_fd> -n <username>
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[148] ** abnormal termination of /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d (returned: 1)
9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[148] ** httpsproxystart failed r:1
9/5/08 1:20:30 PM ARDAgent [154] ******ARDAgent Launched******
9/5/08 1:20:31 PM mDNSResponder[16] registerserviceinstance: domain paul\.dyson.members.mac.com. already registered
9/5/08 1:20:31 PM ARDAgent [154] ******ARDAgent Ready******
9/5/08 1:20:34 PM airportd[90] Probing highest ranked networks via directed scan..
9/5/08 1:20:37 PM kernel AirPort: Link Up on en1
9/5/08 1:20:38 PM Dock[165] _DESCRegisterDockExtraClient failed 268435459
9/5/08 1:20:39 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021C:B3FF:FEB2:4695); network traffic reduction measures in effect
9/5/08 1:20:42 PM /System/Library/CoreServices/coreservicesd[83] SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(medialocal's Public Folder) returned -14135
9/5/08 1:20:42 PM /System/Library/CoreServices/coreservicesd[83] SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Paul Admin's Public Folder) returned -14135
9/5/08 1:20:43 PM com.apple.KerberosAutoConfig[183] Kerberos configuration is up to date
9/5/08 1:20:44 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.35.3); network traffic reduction measures in effect
9/5/08 1:20:45 PM airportd[90] Error: Apple80211Associate() failed -6
9/5/08 1:20:46 PM kernel AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
9/5/08 1:20:46 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.35.3); network traffic reduction measures in effect
9/5/08 1:20:46 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021C:B3FF:FEB2:4695); network traffic reduction measures in effect
9/5/08 1:20:46 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.35.3); network traffic reduction measures in effect
9/5/08 1:20:48 PM com.apple.familycontrols[132] ** trying to launch apache with but no username given
9/5/08 1:20:48 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[148] ** trying to launch apache with but no username given
9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper 2008-09-05 13:20:48.022 iCalExternalSync[185:10b] WARNING: restore save failed: Error Domain=NSCocoaErrorDomain Code=134030 UserInfo=0x175c10 "An error occurred while saving." {
9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper NSUnderlyingException = Fetching maximum primary key failed;
9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper }
9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper 2008-09-05 13:20:48.041 iCalExternalSync[185:10b] WARNING: CalCalendarStore: restore failed: Error Domain=CalCalendarStorePersistenceErrorDomain Code=1 UserInfo=0x176b00 "Failed to rebuild the iCal database."
9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper {
9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper NSLocalizedDescription = "Failed to rebuild the iCal database.";
9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper NSLocalizedRecoverySuggestion = "An error occurred while saving.";
9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper }
9/5/08 1:20:48 PM iCalExternalSync[185] WARNING: restore save failed: Error Domain=NSCocoaErrorDomain Code=134030 UserInfo=0x175c10 "An error occurred while saving." {
NSUnderlyingException = Fetching maximum primary key failed;
9/5/08 1:20:49 PM com.apple.KerberosAutoConfig[188] Kerberos configuration is up to date
9/5/08 1:20:48 PM iCalExternalSync[185] WARNING: CalCalendarStore: restore failed: Error Domain=CalCalendarStorePersistenceErrorDomain Code=1 UserInfo=0x176b00 "Failed to rebuild the iCal database."
NSLocalizedDescription = "Failed to rebuild the iCal database.";
NSLocalizedRecoverySuggestion = "An error occurred while saving.";
9/5/08 1:20:50 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.35.3); network traffic reduction measures in effect
9/5/08 1:20:50 PM mDNSResponder[16] SendResponses: No active interface to send: 04 17 Media\032Mac\032mini.device-info.tcp.local. TXT model=Macmini2,1
9/5/08 1:20:53 PM [0x0-0x14014].SoftwareUpdateCheck[192] SoftwareUpdateCheck: non-admin user
9/5/08 1:20:54 PM com.apple.launchd[133] ([0x0-0x14014].SoftwareUpdateCheck[192]) Exited with exit code: 102
9/5/08 1:20:54 PM com.apple.KerberosAutoConfig[215] Kerberos configuration is up to date
9/5/08 1:20:56 PM com.apple.familycontrols[132] ** [User findUserByID:1038 searchParent:NO] returned nil
9/5/08 1:20:56 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[220] ** [User findUserByID:1038 searchParent:NO] returned nil
9/5/08 1:20:56 PM com.apple.familycontrols[132] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d: option requires an argument -- n
9/5/08 1:20:56 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[223] 'Unknown argument given
9/5/08 1:20:56 PM com.apple.familycontrols[132] 'Unknown argument given
9/5/08 1:20:56 PM com.apple.familycontrols[132] Usage: /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k start -p <port> -n <username>
Once loaded iCal does not respond and a "force quit" is the only option.
I have looked at the logs in Server Admin and I can't seem to see any problems at about the same time.
I would be grateful if someone could let me know whether this is a bug with the software or whether there is a solution. For the time being, the mac users are having to use portable home directories in order to allow them to use iCal.
<Edited by Moderator>

Hi
I've not long ago spotted it. It is a longish log. I would sort out that problem anyway because it can't be good for that user.
What needs to happen is a sampling of a the log server side when the problems occur for the clients. It would be a good idea if you posted a little more about how the server is configured. Are you using Server Preferences to administer the Server by any chance? What is the result of issuing this command from terminal:
sudo changeip -checkhostname
Post the result. Did the apple engineer configure internal DNS & DHCP Services to accommodate the web and ical services? Is the web service running? Are you using virtual domains? Are the client macs using the Server to resolve DNS?
As you can see lots of questions. If you are using Server Preferences then I'm going to have to stop trying to assist you. Please don't think there is anything wrong with your server because you are using the application, because there is not. Neither is there anything wrong with the choices made by the original guy. It's just I don't deal with anything other than Advanced. I have little knowledge of Server Preferences. Please don't be tempted to 'convert' to Advanced thinking it may 'improve' matters. It's just as likely it will make things worse.
Consider getting the original guy back in and having him do it for you again. Who knows you may find things will go a lot smoother this time?
Tony

Photoshop CS4 will not refresh or update view

Hello,
My Photoshop CS4 will not update / refresh the viewport after any change to the layers or settings. The view will only refresh if the view is changed, such as the hand or zoom tool. This makes Photoshop nearly usesless. Did some looking around the net and have seen a few responses to situations similar to this but none of them are regarding a Mac. This is my work computer so you can understand my frustration.
Hardware Overview:
Model Name:    Mac Pro
Model Identifier:    MacPro4,1
Processor Name:    Quad-Core Intel Xeon
Processor Speed:    2.66 GHz
Number Of Processors:    1
Total Number Of Cores:    4
Memory:    6 GB
NVIDIA GeForce GT 120:
Chipset Model:    NVIDIA GeForce GT 120
VRAM (Total):    512 MB
Vendor:    NVIDIA (0x10de)
LED Cinema Display:
Resolution:    1920 x 1200
Depth:    32-Bit Color
Core Image:    Hardware Accelerated
Main Display:    Yes
Mirror:    Off
Online:    Yes
Quartz Extreme:    Supported
Rotation:    Supported
Connection Type:    DisplayPort
Any ideas on how I can solve this would be greatly appreciated, I need to use PS on a daily basis here and this is killing me to be unable to use it.
Thanks,
Isaac
Designer at The University of Texas at Dallas

DesignbyIsaac wrote:
NVIDIA GeForce GT 120:
Chipset Model:    NVIDIA GeForce GT 120
VRAM (Total):    512 MB
Vendor:    NVIDIA (0x10de)
I do not see that card in the list of supported cards:
http://kb2.adobe.com/cps/405/kb405711.html
Mac OS graphics display cards We tested the below cards on Mac OS 10.5.4 and 10.4.11.
The following cards were tested only on Mac OS 10.5.4: 8800GT, iMac 8800 GS, and 8600M.
      MACTEL iMac 8800 GS 512 MB
      MACTEL 8800 GT 512 MB
      MACTEL Radeon x1900 512MB
      MACTEL nVidia Quadrofx 4500 512MB
      MACTEL nVidia 8600M 256MB
      PPC nVidia 7800 256MB
      MACTEL ATI HD 2600 MAC 256MB
      17" MACTEL iMac x1600 128MB
      Macbook Air intel GMA X3100
Note: Due to technical issues we enable OpenGL for the 7300GT, but we had to disable Advanced Drawing and 3D Acceleration.

Spry Data Set will not Refresh with New Data?

I'm using the Dreamweaver CS4 "Spry Data Set" Wizard and created the following layout on one of my pages:
In the wizard, under "Specify a Data Source", I chose "HTML", and selected my cfm page that has a simple Table with the datasource below:
<cfparam name="URL.id_com" default="1">
<cfquery name="rsTickets" datasource="Ctickets">
SELECT ticketNum, ticketType, ticketDate, acctNum, firstName, lastName, businessName, city, status, owner, ticketDetails
FROM tickets
WHERE acctNum = <cfqueryparam value="#URL.id_com#" cfsqltype="cf_sql_numeric">
</cfquery>
When I display the page in IE8, The Spry Master/Detail page will not filter my records based on the URL parameter?
(Note: All my other "Non-Spry" datasets filter fine by the URL)
Question: How do I make the Spry data "Refresh" or "Re-run the query" so the data filters properly?
Thanks,
jlig

Ben, Thanks for the reply..
Here is my Source Data page which I created & selected in the Spry Data Wizard: http://cerberus.clearwave.com/jerry/Spry2.jpg
(this page takes my query, filtered by the URL Acct field and makes a simple table to feed the Spry Wizard)
- In the Spry Data Wizard, I selected the file and it properly found the table data: http://cerberus.clearwave.com/jerry/Spry3.jpg
- Then I clicked Next and changed a few of the field types: http://cerberus.clearwave.com/jerry/Spry4.jpg
- Next I chose Master-Detail and used the Acct field to be the Master : http://cerberus.clearwave.com/jerry/Spry5.jpg
- Lastly, I open up the webpage, click on the Tickets Spry Tab: http://cerberus.clearwave.com/jerry/Spry6.jpg
As you can see in the picture on this page: http://cerberus.clearwave.com/jerry/Spry6.jpg, the URL parameter is = 3902 which is the Acct number
being passed from the previous page in my application. (Ex..http://192.168.1.77/COE/salespipeline_mi.cfm?id_com=3902)
The first one is correct, but once I move to a different Acct number the Spry data will not update to reflect the correct Tickets?
Once I move to say, Acct 4413, the Spry Tickets Tab does not change or update to reflect this Acct's tickets?
(see link--> http://cerberus.clearwave.com/jerry/Spry7.jpg)
Here is my code listing for the Tabbed Webpage: http://cerberus.clearwave.com/jerry/Spry8.txt (see images 6 & 7)
It seems like I'm missing some kind of "Trigger" or "Requery" or "Refresh" that "Re-runs" the Source Data page (http://cerberus.clearwave.com/jerry/Spry2.jpg)..?
Thanks again,
jlig

UIX form will not refresh data within session

I have some UIX forms to view a table, they displays data fine but when the underling table data changes (from another user session or an update trigger from different table) the forms will not show refreshed data, unless I delete my browser session cookie. Is there a simple way to fix this, and cause data to be reloaded each time its displayed? I'm using JDeveloper 10.1.2
Thanks, Craig Smith
Message was edited by:
user503876
Message was edited by:
user503876

Dear Sir...
in the struts page flow diagram
1- create a data action
2- drag the execute method from the viewobject methods and drop it on the data action
3- draw a page forward from the data action to your data page
4- finally ad a refresh link in your page which links to your data action
now each time you click the refresh button on your page, the execution will go to the data action, where the execute method is executed (the data is refreshed) and then the control goes back to your page.
best regards

SkillBuilders modal plugin - Reports will not refresh

Hi all,
I'm attempting to use the SkillBuilders Modal Page 2.0.0 plugin, everything seems to work except the refreshing of the reports. When clicking on the links the modal page opens, I can make changes, and after clicking on "apply changes" the modal box closes and I am back at the originating page, however the reports have not refreshed. If I manually refresh the page or the reports - the reports change as expected. I believe my problem is in the Auto Close Dynamic action, but I can't seem to find it. There isn't any errors displayed in the error console either. Any suggestions? Thanks in advance
SkilBuilders Modal Page 2.0.0 plugin
Apex version 4.2.1.00.08
Theme 26 - Productivity Applications
Page has 3 reports - 2 classic and 1 IR.
Each report has a link with the class "edit-link"
Dynamic action (Edit Clicked) is set up with:
Event: click
Selection Type: jQuery Selector
jQuery Selector: a.edit-link
Condition: No Condition
Event Scope: Static
True Actions settings are:
URL Location: Attribute of Triggering Element
Attribute Name: href
Auto-close On Element Selector: section#uSuccessMessage
Dynamic action (Modal Page Auto Close) is set up with:
Event: Auto Close [SkillBuilders Modal Page (2.0.0)]
Selection Type: DOM Object
DOM Object: document
Condition: No Condition
Event Scope: Static
3 True Actions settings are:
Action: Refresh
Selection Type: Region
Region: "Name of Region"
Thanks
Wayne

Hi Wayne,
You've got a job on trying to refresh a classic report using the standard dynamic action, it's not as straightforward as simply selecting the region.
The fastest way to achieve this (unless you MUST have AJAX refreshing of reports) is to change the action of the Auto Close event to Submit Page.
It's quick and dirty - but it works.
Hope this helps, cheers, Pete

Cascading LOV in af:table will not refresh correctly

Jdeveloper version 11.1.1.5.0
I have spent quite a bit of time trying to understand why 2-level cascading LOV won't work in a particular situaion. I still haven't been able to fix it and so I turn to the ADF gurus on this forum.
Here's the scenario:
1. I have a ViewObject called AdjustDeltaValuesView. This VO contains attributes from its entity. It also has transient attributes called CategoryId and CodeId.
2. There is LOV defined for CategoryId for VO CodeCategoryMasterView
3. There is LOV defined for CodeId for LimitedCodeMasterView.
3. View Criteria is created for LimitedCodeMasterView which sets a bind variable value from CodeCategoryMasterView.CodeCategoryId.
4. I have wired all the LOVs correctly and it is working properly in ADF BC tester.
5. In the UI, I have dropped AdjustDeltaValuesView data control as ADF Table where CategoryId and CodeId are displaying as af:selectOneChoice.
6. CategoryId has autoSubmit=true and CodeId has partialTrigger set to component ID of CategoryId.
7. The LOV inside editable af:table is working fine except one scenario that when user selects same categoryId from the category LOV in the second row, the CodeId LOV will not populate.
Here's the code snippet of jspx:
        <af:table value="#{bindings.AdjustDeltaValuesView1.collectionModel}"
                  var="row" rows="#{bindings.AdjustDeltaValuesView1.rangeSize}"
                  emptyText="#{bindings.AdjustDeltaValuesView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                  fetchSize="#{bindings.AdjustDeltaValuesView1.rangeSize}"
                  rowBandingInterval="0"
                  selectedRowKeys="#{bindings.AdjustDeltaValuesView1.collectionModel.selectedRow}"
                  selectionListener="#{bindings.AdjustDeltaValuesView1.collectionModel.makeCurrent}"
                  rowSelection="single" id="t1" editingMode="editAll"
                  rendered="false">
          <af:column sortProperty="CategoryId" sortable="false"
                     headerText="#{bindings.AdjustDeltaValuesView11.hints.CategoryId.label}"
                     id="c25">
            <af:selectOneChoice value="#{row.bindings.CategoryId.inputValue}"
                                label="#{row.bindings.CategoryId.label}"
                                required="#{bindings.AdjustDeltaValuesView11.hints.CategoryId.mandatory}"
                                shortDesc="#{bindings.AdjustDeltaValuesView11.hints.CategoryId.tooltip}"
                                id="soc3" autoSubmit="true">
              <f:selectItems value="#{row.bindings.CategoryId.items}" id="si3"/>
            </af:selectOneChoice>
          </af:column>
          <af:column sortProperty="CodeId" sortable="false"
                     headerText="#{bindings.AdjustDeltaValuesView11.hints.CodeId.label}"
                     id="c27">
            <af:selectOneChoice value="#{row.bindings.CodeId.inputValue}"
                                label="#{row.bindings.CodeId.label}"
                                required="#{bindings.AdjustDeltaValuesView11.hints.CodeId.mandatory}"
                                shortDesc="#{bindings.AdjustDeltaValuesView11.hints.CodeId.tooltip}"
                                id="soc4" partialTriggers="soc3">
              <f:selectItems value="#{row.bindings.CodeId.items}" id="si4"/>
            </af:selectOneChoice>
          </af:column>For example, where it DOES NOT Work
1. User selects Category A from dropdown from the first row.
2. code Id dropdown populates with corresponding values in the list based on CategoryId user selected.
3. user selects Code X from the dropdown.
4. User selects Category A from the dropdown from the second row.
5. PROBLEM: In the second row, Code Id dropdown does not populate. Code dropdown is empty.
Where it works:
1. User selects Category A from dropdown from the first row.
2. code Id dropdown populates with corresponding values in the list based on CategoryId user selected.
3. User selects Category A from the dropdown from the second row.
4. In the second row, Code Id dropdown populates correctly.
Where it works:
1. User selects Category A from dropdown from the first row.
2. code Id dropdown populates with corresponding values in the list based on CategoryId user selected.
3. user selects Code X from the dropdown.
4. User selects Category B from the dropdown from the second row.
5. In the second row, Code Id dropdown populates correctly.
Has anyone come across this scenario? It's a very weird problem.
I hope I have explained this well. If it's not clear please let me know.
Edited by: Shah23 on Jan 14, 2013 6:42 PM
Edited by: Shah23 on Jan 15, 2013 9:09 AM

Hi,
Always mention your JDev version.
Try modifying your VOs as explained in this blog and see if it works fine : https://blogs.oracle.com/aramamoo/entry/how_to_create_multi_level
-Arun

ITunes 11.3.1 will not refresh subscribed podcasts

A week ago iTunes just stopped downloading any podcast that I am subscribed to. If I go to the podcast section of the iTunes Store, find a podcast that I am already subscribed to and click the download an episode, everything works fine. It's just that iTunes refuses to refresh any podcasts. This is not iTunes saying that I haven't listened to a podcast in a while would I like to resume; this is I select a podcast, ask it to refresh and nothing happens. Same if I ask iTunes to refresh all podcasts.

I have a similar issue. When I attempt to refresh a podcast subscription, iTunes stops working. I recently updated to version 11.3.1.2. Any ideas?

LMS will not refresh after course is closed

Hello,
I am hoping someone can give me insight into what might be causeing this problem.
I have a number of courses uploaded to both a staging site and a live site. We recently made a few changes to a course which I thought were quite minor and I uploaded the new scorm files to the LMS staging site for testing.
The changes were:
the continue button on the Quiz Review slide has always had the text "exit" instead of "continue" but I recently changed the colour from grey to red.
the message that a user received when they pass the quiz is different
The old courses worked on both sites as follows:
If a course was started and a user quite part way through the course the LMS would say resume course when the user logged back in.
If the course was failed then the user would see retake on the LMS when they logged back in and could then retake the course.
If the user passed the course, it was moved from an "In Progress" area on the LMS to a "Completed" area on the LMS automatically.
Since I made the relatively minor changes to the courses, they will no longer move unless you choose to refresh the page. All courses that have not been updated still work as they should which is what leads me to believe it is not a LMS issue but rather the scorm file issue.
I am using Captivate 7 and have recently updated all my Adobe products so I should have the most recent version of the software. I am wondering if something has changed with how Captivate creates Scorm files?
Also under Reporting/advanced LMS for the courses I have selected Send data on every slide and Set exit to normal after completion (these have always been the settings)
Scorm files are SCORM 2004
Any input would be very much appreciated.

Hi Rod,
I could be wrong but I don't think that is the issue.
The updated courses are only on the staging site as we do not transfered them until they are tested. Only those courses that have been recently updated are not working properly but I know that the correct course is being loaded as the button on the Quiz Review is now red. Yesterday I did a test on the live site and uploaded one of the updated courses to see if the problem persisted on the live site. Same problem was on the live site. When I removed this undated course and reverted back to the original the problem went away. It seems it is definitely an issue with the newly updated course.
The courses were oringinaly created using Captivate 6 but then saved in Cativate 7 months ago as I have been using it since if first came out. The original files that were working were created in Captivate 7.
Thanks

ITunes 10.7 - will not refresh podcasts as of November 8

Previously, it would refresh (download new episodes) of all podcasts fine. It has been set to update every hour and have not had problems with it. Since yesterday (November 8) it stopped checking every hour (new podcasts have been released, but not downloaded by iTunes). If I manually attempt to refresh, a circle with dashes (not a solid circle) shows up to the left of each subscribed podcast but there is no indication that it is actually checking for any (do not see network traffic either when watching via tcpdump). Trying to get individual podcasts to update has the same result.
Any recommendations or known solutions for this problem?

Same problem here... seems to be a problem on Apple's podcast library. AppleTV is not showing new podcasts either.

An iCal calendar will not stay deleted.

I used to use Entourage but it kept duplicating all my appointments on all my devices so I got rid of it and just started using iCal and it seems to have corrected all the duplicate appointments.
But on my iMac there is still an Entourage calendar appearing in my list of calendars in iCal. There are no appointments in the Entourage calendar. It's listed under "on my mac" and I have deselected it and when I try to delete the Entourage calendar from my iMac iCal, it reappears instantly with a "Microsoft Error Reporting" message "Microsoft sync services has encountered a problem and needs to close. We are sorry for the inconvenience." AND the Entourage calendar reappears and is checked again!
My 2 iPhones and iPad have iCal set as the default calendar.
Suggestions?

Greetings,
Ensure you have turned off iCal syncing within the Entourage program. That is what adds the Entourage calendar to iCal in the first place. It is inside Entourage under Entourage > Preferences.
If that is already taken care of:
First make an iCal backup, File > Export > Archive.
Remove the following to the trash and restart your computer:
Home > Library > Caches
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
If the issue persists reset your sync history: http://docs.info.apple.com/article.html?path=iSync/3.1/en/9247.html
Hope that helps.

Excel Pivot (molap) will not refresh from an SSAS box that is not part of the Farm

I have spent hours trying to get this working going through many links. One of the best ones is this.
http://whitepages.unlimitedviz.com/2010/12/connecting-to-cubes-and-external-data-with-excel-in-sharepoint/
However even after doing all of this it is still not working. Here is my set up. I have a sharepoint 2013. I am trying to connect to my DW SSAS server that is on a different domain and not part of the farm. Everything else seems to
work but excel. I have power view connecting and creating great reports with refesh working perfect. I have performance point working. I have Reporting Services working. We installed adventureworks on the local SSAS farm version and
excel is working with this and refreshed just fine. I can ceate and excel report and save it to sharepoint but when I open it I get the famous error.
An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh:
I can open in excel and then refresh all from excel and all works fine. I do not want my users to have to go through this. They should be able to use excel in sharepoint. Any ideas on what I am missing. I have tried to follow exactly
what the link above says but still not working.
Ken Craig

The first article is checking to make sure power pivot is installed and local ssas is running. This could not be an issue since like I mentioned I can create a Excel report to the local farm version of ssas and it opens and refreshed fine. That
would mean that power pivot is installed and the services are running right:)?
The second article I have done over and over and I am pretty sure this works. Again I can export to excel and it works just fine meaning my Data source is valid right? yes I have chosen "none" as well.
The third article talks about the different viewers. Mine is using
xlviewer.aspx so I would assume this is not the issue.
Here is what I am seeing in the logs but I am not sure what they are saying. I used uls view somewhat like you would profiler. I started it tried to open excel and then stopped it. Below are logs that look like they pertain to this action.
ConnectionManager.GetConnection: Failed to create new connection, exception=Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException: Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass8.<CreateConnection>b__5()
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsTrustedSubsystem.TryExecuteImpersonated(ExecuteImpersonatedMethod method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials, ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId), sessionId=1.V23.297S76/z2k/Evl+S78bqiKj14.5.en-US5.en-US36.5a800c6f-758b-44e2-a092-e592f15e09771.A1.N,
connectionString=Provider=MSOLAP.5;Integrated Security=SSPI;Persist Security Info=True;Data Source=BIL-BIRSTDB\ASADMIN;Initial Catalog=Ecomm OLAP pool count=0
ConnectionManager.GetConnection: Caught an exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException: Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass8.<CreateConnection>b__5()
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsTrustedSubsystem.TryExecuteImpersonated(ExecuteImpersonatedMethod method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials, ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnectionAndAddToList(ConnectionRequest connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Boolean auditConnection, Int32 keyLcid, ConnectionKey
connectionKey, AutoReaderWriterLock autoPoolLock, Connection& connection, ConnectionList& connectionList)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.GetConnection(ConnectionRequest connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Int64 privateConnectionId, Boolean auditConnection)
Refresh failed for 'BIL-BIRSTDB_ASADMIN Ecomm OLAP Report' in the workbook 'http://eagleviewportal/BusinessIntelligenceCenter/Templates/Ecomm Report Power Pivot Default.xlsx'. [Session: 1.V23.297S76/z2k/Evl+S78bqiKj14.5.en-US5.en-US36.5a800c6f-758b-44e2-a092-e592f15e09771.A1.N
User: 0#.w|hqeagleview\ken.craig]
ExternalSource.ValidateConnection: Unable to get a connection: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException: Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass8.<CreateConnection>b__5()
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsTrustedSubsystem.TryExecuteImpersonated(ExecuteImpersonatedMethod method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials, ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnectionAndAddToList(ConnectionRequest connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Boolean auditConnection, Int32 keyLcid, ConnectionKey
connectionKey, AutoReaderWriterLock autoPoolLock, Connection& connection, ConnectionList& connectionList)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.GetConnection(ConnectionRequest connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Int64 privateConnectionId, Boolean auditConnection)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.TryGetValidatedConnection(Request request, ConnectionRequest connectionRequest, ExternalDataScenario scenario, Credentials credentials, ExtendedConnectionInfo extendedConnectionInfo, Int64
privateConnectionId, Boolean shouldReportFailure, Connection& connectionOut). sessionId=1.V23.297S76/z2k/Evl+S78bqiKj14.5.en-US5.en-US36.5a800c6f-758b-44e2-a092-e592f15e09771.A1.N, externalSource=BIL-BIRSTDB_ASADMIN Ecomm OLAP Report
ExternalDataUtility.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException'
was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String connectionName, ExtendedConnectionInfo extendedConnInfo, Boolean& shouldReportFailure)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalDataUtility.GetExtendedConnectionInfo(IExternalDataObject extObject, ConnectionInfoManager connectionInfoManager, Request request, Int32 externalSourceIndex, Boolean ignoreErrors, ExternalDataScenario
scenario, Exception& lastException, Boolean& shouldReportFailure)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.GetConnection(ExternalKey externalKey, Int32 externalSourceIndex, ExternalQueryKey externalQueryKey, ConnectionRequest connectionRequest, Int64 privateConnectionId, ExternalDataScenario scenario,
Boolean prepare), Data Connection Name: BIL-BIRSTDB_ASADMIN Ecomm OLAP Report, SessionId: 1.V23.297S76/z2k/Evl+S78bqiKj14.5.en-US5.en-US36.5a800c6f-758b-44e2-a092-e592f15e09771.A1.N, UserId: 0#.w|hqeagleview\ken.craig
Ken Craig

Ical subscriber will not refresh

Similar Messages

Maybe you are looking for