LMS will not refresh after course is closed

Hello,
I am hoping someone can give me insight into what might be causeing this problem.
I have a number of courses uploaded to both a staging site and a live site. We recently made a few changes to a course which I thought were quite minor and I uploaded the new scorm files to the LMS staging site for testing.
The changes were:
the continue button on the Quiz Review slide has always had the text "exit" instead of "continue" but I recently changed the colour from grey to red.
the message that a user received when they pass the quiz is different
The old courses worked on both sites as follows:
If a course was started and a user quite part way through the course the LMS would say resume course when the user logged back in.
If the course was failed then the user would see retake on the LMS when they logged back in and could then retake the course.
If the user passed the course, it was moved from an "In Progress" area on the LMS to a "Completed" area on the LMS automatically.
Since I made the relatively minor changes to the courses, they will no longer move unless you choose to refresh the page. All courses that have not been updated still work as they should which is what leads me to believe it is not a LMS issue but rather the scorm file issue.
I am using Captivate 7 and have recently updated all my Adobe products so I should have the most recent version of the software. I am wondering if something has changed with how Captivate creates Scorm files?
Also under Reporting/advanced LMS for the courses I have selected Send data on every slide and Set exit to normal after completion (these have always been the settings)
Scorm files are SCORM 2004
Any input would be very much appreciated.

Hi Rod,
I could be wrong but I don't think that is the issue.
The updated courses are only on the staging site as we do not transfered them until they are tested. Only those courses that have been recently updated are not working properly but I know that the correct course is being loaded as the button on the Quiz Review is now red. Yesterday I did a test on the live site and uploaded one of the updated courses to see if the problem persisted on the live site. Same problem was on the live site. When I removed this undated course and reverted back to the original the problem went away. It seems it is definitely an issue with the newly updated course.
The courses were oringinaly created using Captivate 6 but then saved in Cativate 7 months ago as I have been using it since if first came out. The original files that were working were created in Captivate 7.
Thanks

Similar Messages

The iPhone installed Stock App will not refresh and I've closed it down and rebooted and it's still froze up

Why does the installed iPhone Stock app keep freezing up and how do you fix ?

Hi there,
If you are experiencing issues with the applications that came installed on the device, I would recommend taking a look at steps 4 and 5 in the article below.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
If you continue to experience issues the application, then you may need to restore the iOS software on your device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
-Griff W.

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

HT1338 Aperture will not open after update? What do I do?

Aperture will not open after I updated. What do I do?

Mgoss, quit the installer or App Store/Software Update (depending on what you're using to update) and restart your machine. With Aperture closed, drag the Aperture application to the trash, then reinstall Aperture from your original media and, if necessary, update again.

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

Leonie,
Fisrt let me thank you for your reply and assistance! So here is the problem with so more detail...I was not sure I was going to get any replies ; )
I restored from a time machine back up.
History of Failure:
I was trying to launch Aperture when the kernal panic occured. My computer had been closed, and asleep and the battery was dead. I plugged in charger and it was restoring/waking up after being asleep/shutting down from dead battery. I launched Aperture from the dock and as soon as it opened the kernal panic occured. After that the computer would not turn on. It would try to boot then it would shut off. I even tried to safe boot to no avail. I went to the Apple store and they told me that the only thing I could do was restore whole computer from back up. So thats what I did.
Since then my previous aperture library: "2011" will not open. I have created a new aperture library "2012", and it runs fine. I have added new photos for about the past month...no problems.
When I launch aperture with 2012 library then try to switch libraries, I get the following prompt: "The selected library is from an older version of Aperture and requires a relaunch to switch." I choose "Relaunch" and I get the following warning prompt: "There was an error opening the database for the library “~/Pictures/Aperture Library 20111.aplibrary”." The only option is "Quit"
Both libraries are version 3.2.3
Computer stats: 3.06 GHz Core 2 Duo, 8 GB 1067 MHz DDR3 RAM, OS X 10.6.8
I have tried to launch aperture troubleshooting by holding option+command from both the aperture icon and from the library file, neither will launch the troubleshooting feature.
I am ok with computers, but not a whiz (mechanical engineer)...to me it seems as though there is a corrupt path or file or some sort of "check" that is failing, becuase the failure occurs so fast after trying to launch aperture. Maybe that doesn't make any sense but just a thought.
I hope that you may be able to provide some insight. Thank you again for you time and I hope that you have a nice day!
Mike

Will Not Copy After Being Idle

THIS IS A COPYING ISSUE!!! After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print. I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem. Consequently, we purchased a new HP 5740 printer The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work. If you then turned the printer off and immediately turned it back on, it would copy. Again, Comcast reiterated it was a printer problem. I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer. After hooking up the second HP 5740, the same problems with copying occurred. I returned the second HP 5740 to the dealer for a refund and left town for three months. We recently returned and purchased a HP ENVY 7645 printer from another dealer. We are having the same issues with this printer as we had with the two previous HP 5740 printers. I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician. The installation occurred today and we are still experiencing exactly the same problem. The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy. He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem. DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

Hi @lamoso,
Welcome to the HP Forums!
I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
Let's see what happens after giving these two steps a try!
Thank you for posting!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours and

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.

Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen

Ipod touch will not sync after new itunes update

Ipod touch 4th generation will not sync after I updated the new itunes. Actually after I updated to the new itunes it deleted all my music from my ipod and refuses to reload. If someone could please help me that would be completely appreciated. I tried trying to sync each song individually but it didn't help (before it stopped syncing), then it stopped syncing, even though I have it hooked up it brings everything that I have on my ipod up but it won't do anything.

When I tried the first time it asked me if i wanted it to stop syncing and to restore. It gave the choices of yes and cancel, i didn't click either because the option box went away and it just stopped restoring on its own. I did the store again and now it is asking if i want to set up as a new ipod or to restore to Andrea's ipod. Should I set up as new?
Thank you Espeon for the article

Ipod touch 5th gen will not sync after windows 8.1 update

ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Mac Mini will not boot after Security Update 2008-007

Hello,
A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

Hi Arkku , and a warm welcome to the forums!
I'd certainly give Sig's advice a try first.
If that should fail...
applesetupdone...
This was Posted by: JoseAranda at September 9, 2006 3:48 AM
"OK, restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy Enter
/sbin/mount -uaw Enter
rm /var/db/.applesetupdone Enter
# The rm command is the remove command which deletes the file.
# Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
reboot Enter
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
end of posted by: JoseAranda"
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

Upgraded ZENworks Primary Server Will Not Refresh

Good Afternoon,
I recently upgraded our primary server from ZENworks 11.2-11.3a.
The upgrade procedure completed with no errors. However, the server will not refresh it's status in the ZENworks Control Center. Control Center continues to report the server as 11.2.0.0. The UI of the Control Center is upgraded. The agent continues to push back the next contact with server time without updating the last contact with server time
Things I have tried:
-doing a manual refresh through control center gives a "Connection Failed" error
-doing a manual refresh with zac ref completes successfully but does not update anything
-cleared the agent cache using zac cc
Any help would be appreciated.
Thank you very much!

Try the solution you find in this thread:
http://forums.novell.com/novell-prod...nt-management/
zenworks/configuration-management/zcm-11/zcm11-agent-deployment-linux/45
5516-how-recover-lost-trust-relationship-zone-configuration-between-linu
x-zcm-agent-primary-zone-server-running-same-machine.html
W. Prindl
wpico wrote:
>
>CRAIGDWILSON;2331318 Wrote:
>> This is because the Agent Service (Servers have an agent too)
>>cannot talk to the zone.
>>
>> Normally the only time this is noticed is during a "System Update",
>> since this is one of the few times the failure would be noted.
>>
>> However, the 11.3.0 Upgrade would not have relied on the agent
>>server and since you upgraded from 11.2.0, another ISO install, it
>>is quite possible there were always some issues there.
>>
>> "zac retr" might help, but it also may be wise to open an SR so
>>they can
>> see what is wrong and not just have you poking and prodding your
>>only primary.
>>
>>
>> On 8/28/2014 4:46 PM, wpico wrote:
>> >
>> > nop1983;2331309 Wrote:
>> >> wpico wrote:
>> >>
>> >>>
>> >>> Good Afternoon,
>> >>>
>> >>> I recently upgraded our primary server from ZENworks
>>11.2-11.3a. >>>
>> >>> The upgrade procedure completed with no errors. However, the
>> server
>> >>> will not refresh it's status in the ZENworks Control Center.
>> Control
>> >>> Center continues to report the server as 11.2.0.0. The UI of
>>the >>> Control Center is upgraded. The agent continues to push
>>back the next
>> >>> contact with server time without updating the last contact with
>> server
>> >>> time
>> >>>
>> >>> Things I have tried:
>> >>> -doing a manual refresh through control center gives a
>>"Connection >>> Failed" error
>> >>> -doing a manual refresh with zac ref completes successfully but
>> does
>> >>> not update anything
>> >>> -cleared the agent cache using zac cc
>> >>>
>> >>> Any help would be appreciated.
>> >>>
>> >>> Thank you very much!
>> >>
>> >> Only one server?
>> >> Sounds like the agent could have lost the trust, somehow... The
>> update
>> >> went fine?
>> >>
>> >> --
>> >> Niels
>> >> I have always liked... Cowabunga!
>> >>
>> >> If you find this post helpful, please show your appreciation by
>> clicking
>> >> on the star below.
>> >> A member must be logged in before s/he can assign reputation
>>points. >
>> > Completed with no errors, The log file was all green.
>> >
>> >
>>
>>
>> --
>> Going to Brainshare 2014?
>> http://www.brainshare.com
>> Use Registration Code "nvlcwilson" for $300 off!
>>
>>
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Technical Support Engineer
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>>human.
>
>When I run zac retr I get, "Failed to re-establish trust with zone"

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

LMS will not refresh after course is closed

Similar Messages

Maybe you are looking for