ICals on OS X & iOS display different time for same event

I am in UTC+8 time zone. My boss is in UTC-5 time zone. I have set up sync service on my MBA and iPhone iCals with my company's MS Exchange Server.
I have a weekly meeting invitation from my boss, my MBA iCal displays this meeting on 10:30pm which is wrong, while my iPhone and MS Server displays 9:30pm which is corret - the meeting takes places on 9:30pm my time.
All my other iCal events are fine on both devices, only this weekly event displays different time. I have taken with MBA and iPhone to travel around the world over the past half year and switched time zones on them, but they are all set to adjust time zones automatically, and they are with most up-to-date system. Why does MBA iCal displays wrong time? Can I adjust it? This problem exisits on Lion and now also on M Lion.
Thanks for everyone's attention and help in advance!

Try using floating time zones. It helped for me.

Similar Messages

Display different level for same hierarchy value in BO 4.0

Hi Expert,
I have one question for Webi for BO 4.0
We have one hierarchy in BW side and we hope to display differet level in same report for different column
For example, column A is for level 6. column B is for level 7.
Do you know how to releaze this in Webi side?
In the 3.X version, we have different dimension for different level.
But now in BO 4, it has been combined into one\
Thanks and best regards
Alex yang

Hi,
You can still do this in BI 4.0, if you use the old 'legacy' MDX OLAP.unv from Universe Designer tool .
Yes, with the BICS connection, you are getting a native hierarchy, as it would be displayed in an OLAP environment.
Cheers,
H

How to display different Time Statement forms in ITS service PZ04

Hi all,
I am working on a underlyinge R/3 4.7 system and are working with standalone ITS and ESS 50.4. I am posting this question to find out if any of you has experience with my problem.
The business wishes to use the ITS transation PZ04 standard and wish to be able to display different Time Statement forms in the transaction through customized variants for the report(RPTEDT00) that the PZ04 transaction executes. In the IMG it is posted that one variant has to be created called HRESS_TEDT00 and this works, but restricts the PZ04 transaction to always be called with this variant and therebye the same Time Statement form every time.
I then by debugging found that the underlying ABAP code processed from SAP standard has a variable VARIANT that is hardcode to = HRESS_TEDT00.
The question is: Is there anyway to setup the PZ04 transaction so that it can be dynamic decided which variant should be used, f.ex. from persons subarea from infotype 0001?
Looking forward to here if anybody can help.
Regards,
Allan Brauer

hi allan,
cud u plz help me how to sort out this problem actually in mu company the same scenario is here need to be display pe51 form instead of standard hrforms.....
plz help me how will i replace this "hrforms with pe51"..

My calendar on my iphone displays different times than with icloud on my computer. How can I fix that?, My calendar on my iphone displays different times than with icloud on my computer. How can I fix that?

When I add an event to my calendar on my iPhone, it displays the correct time for the event. If I add it on icloud on my computer, it displays an hour later on my phone. How do I fix this?

iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

How to display different fonts in same indicator in labVIEW

hi
i want to know how to display different fonts in same string indicator at run time in labVIEW 8.2
Regards
Abhishek Verma

Hi ABHI VERMA,
see this http://digital.ni.com/public.nsf/allkb/6BD344ACA4DEE20A8625692700737E16
Mike

How do you display total time for playlist in Itunes 11

how do you display total time for playlist in Itunes 11

"I can see the total time in my playlist on the computer but not on my device??"
I have just posted a question asking the same!
Did you have any joy?

How to display different icon, for different node of jtree

Hi All,
How to display different icon, for different node of jtree

you haven't responded to my last post here: [http://forums.sun.com/thread.jspa?threadID=5323190&messageID=10382676#10382676|http://forums.sun.com/thread.jspa?threadID=5323190&messageID=10382676#10382676]

How do i display different tooltip for different parts of an image

I have a .jpg image that i would like to display different tooltips for depending in where the mouse pointer is in the image.
Any help is appreciated.

I edited the button template in the app.xaml so all my buttons have transparent properties for all the trigger properties and the setter properties since in this instance i have no other use for the button.
<Application x:Class="Application"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
StartupUri="MainWindow.xaml">
<Application.Resources>
<Style TargetType="{x:Type Button}">
<Setter Property="FocusVisualStyle">
<Setter.Value>
<Style>
<Setter Property="Control.Template">
<Setter.Value>
<ControlTemplate>
<Rectangle Margin="2" SnapsToDevicePixels="True" Stroke="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}" StrokeThickness="1" StrokeDashArray="1 2"/>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Setter.Value>
</Setter>
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="Transparent"/>
<Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
<Setter Property="BorderThickness" Value="1"/>
<Setter Property="HorizontalContentAlignment" Value="Center"/>
<Setter Property="VerticalContentAlignment" Value="Center"/>
<Setter Property="Padding" Value="1"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type Button}">
<Border x:Name="border" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" SnapsToDevicePixels="True">
<ContentPresenter x:Name="contentPresenter" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" ContentStringFormat="{TemplateBinding ContentStringFormat}" Focusable="False" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" Margin="{TemplateBinding Padding}" RecognizesAccessKey="True" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" VerticalAlignment="{TemplateBinding VerticalContentAlignment}"/>
</Border>
<ControlTemplate.Triggers>
<Trigger Property="IsDefaulted" Value="True">
<Setter Property="BorderBrush" TargetName="border" Value="{DynamicResource {x:Static SystemColors.HighlightBrushKey}}"/>
</Trigger>
<Trigger Property="IsMouseOver" Value="True">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
</Trigger>
<Trigger Property="IsPressed" Value="True">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
</Trigger>
<Trigger Property="ToggleButton.IsChecked" Value="True">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
</Trigger>
<Trigger Property="IsEnabled" Value="False">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
<Setter Property="TextElement.Foreground" TargetName="contentPresenter" Value="#FF838383"/>
</Trigger>
</ControlTemplate.Triggers>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Application.Resources>
</Application>

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

Need to display different colors for Actuals and forecasting values in WAD

Hi Gurus,
My requirement in the report is, I need to display different colors for particular values like Actuals(say value type 10) and for forecasting values(say value type 20) , and data will uploaded from flat file.
Scenario : If I upload the data for March Month, I receive actual values upto March(Jan to March month) and from April to Dec(Forecast values with value type 20), Every month I will be getting file and similarly for subsequent months, i will get current month actual values and forwarding months forecasting values,
Now , my requirement is, When ever i execute the Report, Say if i execute for April Month, Upto April( Jan to April for actual values should be displayed in one color) and from May to Dec ( forecast values should be displayed in different color).
I had tried with following options like exceptions and could not display , as it runs based on key figure values where as my requiremnet is based on the CALMONTH , i need to show different colors for both actual and forecast values.
Kindly, help me out from this,
Thanks

Hi,
it is not necesseary that you need to do that in WAD , you can do the same in BEx platform, Since WAD is build above the bex reports. so automatially any changes done in Report will be replicated in WAD
Go for Exceptions in Bex. Give some range for Actuals and Forcasting at the creation of the exception.
if you do those changes in BEX automatically it will replicate in the WAD.
for more information please read this link
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
hope this will solve your problem.
Santosh

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

How to Maintain two different prices for same material in different qty?

Dear all,
How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
(Vendor is supplying quantities in 2 different batches & also in different prices)
Expecting valuable reply.
Jeyakanthan

In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
In info record it is not possible to have different prices for the same period, except for scales.
so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

Different View for same document library on a Wiki Page

Hi,
I am developing a Provided hosted app which have a functionality to create a document library with two Views. Also we need to show this document library in a wiki page with two different views.
I am using CSOM (C#). I am able to create the document library and the two views programmatically. But when I add the document library in the wiki page the default view (All Documents) is shown for both the web parts. There is an hidden view created with
the WebPartDefinition from the xml provided through code.
Through CSOM we are able make a View as default with the link below.
http://sharepoint.stackexchange.com/questions/90433/add-document-library-xsltlistviewwebpart-using-csom-or-web-services
In my case both the webparts will get the same view, where I need different view for same document library in a wiki page.
Also I tried to update the web parts with the following code.
string viewString = @"<View Name='{0}' MobileView='TRUE' Type='HTML' Url='/SitePages/Home.aspx' Level='1' BaseViewID='1' ContentTypeID='0x' ImageUrl='/_layouts/15/images/dlicon.png?rev=23' >
<Query><Where><Eq><FieldRef Name='KeyDocument'/><Value Type='Boolean'>1</Value></Eq></Where></Query>
<ViewFields><FieldRef Name='FileLeafRef'/><FieldRef Name='DocumentOwner'/><FieldRef Name='Modified'/>
<FieldRef Name='_UIVersionString'/><FieldRef Name='Editor'/></ViewFields>
<RowLimit Paged='TRUE'>30</RowLimit><JSLink>clienttemplates.js</JSLink><XslLink Default='TRUE'>main.xsl</XslLink>
<Toolbar Type='Standard'/></View>";
WebPartDefinition wpd = wpfound.FirstOrDefault();
string formattedstring = String.Format(viewString, wpd.Id);
wpd.WebPart.Properties["XmlDefinition"] = formattedstring;
wpd.SaveWebPartChanges();
web.Context.ExecuteQuery();
I created two views (viewString) as shown above.
The above code did not throw error, but it did not update the web part.
Please advise how to move forward.

Hi Samir,
When we click outside of the list view webpart on a webpart page (or allitems.aspx page) with containing multiple webparts, the list view webpart will lose the focus, and the selected items will be deselected, this is by design.
You can look at the following article with using the approach/workaround of Javascript to prevent the specified list view webpart from losing focus.
http://sharepoint.stackexchange.com/questions/44360/list-view-loses-focus-when-additional-webpart-added-to-page
//Set focus on our list web part
var webPart = document.getElementById('WebPartWPQ1');
WpClick({target: webPart});
//Prevent it from losing focus
SP.Ribbon.WebPartComponent.$3_1.deselectWebPartAndZone = function() { };
Thanks
Daniel Yang
TechNet Community Support

How to make Different Price for same product in one Sale Order

How can i customizing my system?
I need to sale for different price same product A in one sale order. And price condition type cant be manually. i can separate them by position. for ex. in first position: product A is one price and in 2nd product A with discount. i tried to do it by changing a price group for 2nd position to determinate a discount condition but it generates invoice split.
Someone have any suggestions?

Hi
you can have it automatically determined after some custo and using userexit_pricing_prepare_tkomp in MV45AFZZ and RV60AFZZ.
The idea is to use ítem category field (PSTYV) as a part of pricing data to determine different prices for same material by changing manually ítem category when creating a sales order
- you'll need to create a new ítem category copied from the one you´re using and do all assignments
- add field PSTYV, if not there, to pricing field catalog. This thread has an example on how to and coding required for userexits
http://scn.sap.com/thread/1693234
- Adjust your pricing sequence as per new table
- Maintain specific prices in new table for materials with this new ítem category
Finally, when creating a sales order change, when required, default ítem category by new one to get specific price for material.
Regards,
JM

Folder is empty on second computer. I have installed adobe CC on two different computers for same account so I can work at two different places. I uploaded files to it yesterday and I can't find it on the CC folder on second computer. What can I do?

I have installed adobe CC on two different computers for same account so I can work at two different places. I uploaded files to it yesterday and I can't find it on the CC folder on second computer. What can I do?

Hi DeafScientist,
Please try the below mentioned links.
Creative Cloud Help | Browse, sync, and manage assets
Error: "Unable to sync files"
Creative Cloud File Sync | Known issues
Kindly revert if you are unable to sync files.
Thanks,
Atul Saini

ICals on OS X & iOS display different time for same event

Similar Messages

Maybe you are looking for