ICloud too busy to process request to migrate from mobile me

I've been told three times today, widely separately, that "Due to demand, we can't process your request now." Anybody else have same trouble trying to migrate to the cloud after upgrading Mac OS to 10.7.2/iTunes to 10.5 and iOS to 5?

I've had the same problem, all day yesterday and all day today.
If the server farms are not strong enough to handle signups - even before people get their new iPhones, I'm not so sure I want to trust my data to the system.

Similar Messages

  • Urgent - suddenly getting lots of 'server too busy to support requests greater than 0 for this database' error 10929

    Have been using an application with no problem and no recent changes. Suddenly today (around 09:15 UK time) users started getting frequent error messages:
    Resource ID : 1 The request minimum guarantee is 0, maximum limit is 180 and the current usage for the database is 0. However the server is currently too busy to support request greater than 0 for this database.
    Server is jhzx0qn7ud.database.windows.net
    This has now continued for ~ 6 hours.

    Hello,
    Can you connect to the SQL database from the Windows Azure Management Portal and SSMS? Did you try to break the database connection and then retry request after 10 seconds?
    Please refer to the following article about this error:Resource Governance
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • What is the process of essbase migration from 6.5v to 11.1.1.3

    Hai All
    my client requirement is to migrate the essbase from 6.5 v to 11.1.1.3
    plz help for end to end process to this
    regards
    rajjj

    Hi John....
    We are trying to install EPM 11.1.1.3 ( We are trying to install only Client Components ) in server machine( Processor AMD64, OS: Windows Server 2003 32Bit) we are installing the JAVA 1.6 Also.But we double Click the InstallerTool.cmd it will open the command prompt and throws an error below and disappearing.
    "R:\essbase\\jre\win32\1.6.0\"\..\..\..\installTOOL.jar
    >
    R:essbase>endlocal
    R:essbase>pause
    Press any key to continue...
    This is an error while double click the Installertool.cmd
    If it is Java Compatibility, how can we resolve it.
    We are trying to another XP machine with the same dump it is working
    But in Windows Server machine it is not working.
    For installation of client components only, is Java 1.6 installation is required??
    Could you pls help me What is the Problem
    It will graetful appreciate to resolve it
    Thanks in Advance.........
    Edited by: 789224 on Nov 1, 2010 2:42 AM
    Edited by: 789224 on 12-Nov-2010 01:15
    Edited by: 789224 on 14-Nov-2010 20:59

  • SERVER UNWILLING TO PROCESS REQUEST. (EXCEPTION FROM HRESULT: 0X80072035)

    I'm starting to see the error during password changes or resets against AD. AD seems 'unwilling' and idm returns this error. Afterwards, subsequent updates against the accounts fail with the same error (they are also trying to push the password). Has anyone seen this before? Does anyone know what might be causing it? It is starting to make a big impact.
    Thanks,
    Jim

    I'm dealing with it now on a set of accounts that have not yet had Exchange provisioned. Default AD policy could maybe be adding bad exchange attributes to the accounts I guess.. I'll have to compare some AD objects.
    We do use the userAccountControl attribute directly for enabling and disabling, but have not pushed any value to it yet. We don't push a value when accounts are created. Only when roles disable / re-enable them.

  • Poor Processing Performance after Migration from SSRS 2005 to SSRS 2014

    Hello all,
    a customer is moving from SQL Server 2005 to SQL Server 2014 (clean install on a new machine). There are a lot of reports against an Analysis Services database. I have converted and deployed the reports. Most of them are showing a significant performance
    improvement, but some of them became very slow.
    Analyzing the report server's execution log I have discovered that the rendering time has increased very much (see picture for a specific report below - above the blue line is SSRS 2005 on an older machine, below is SSRS 2014 on a new machine).
    Do you have any hints what I can do?
    Thanks in advance and best regards,
    Gerald

    Thank you for your reply. Cumulative Update 4 has already been installed (I have just compared the installed version number with the list on
    sqlserverbuilds.blogspot.com).
    My first suspicion was also a rdl conversion problem. But as even reports with a blank page where showing this rendering performance problem I began to look at the datasets (although they are executed very fast according to the report server's
    execution log view).
    All MDX queries have been designed using the
    Analysis Services MDX Query Designer. The option for not showing empty cells is activated to supress empty rows. But this option always applies to both axes (when usings the query designer). Thus columns for measures with null values in all rows are omitted
    from the result set. When rendering a report the rsMissingFieldInDataSet-Error is shown, but in SSRS 2005 and also in the Data Tools for SQL Server 2014 this has no further impact.
    But SSRS 2014 is performing very bad in this case. If I remove the NON EMPTY clause for the columns (which only works when switching to the text query builder, so the customer is not able to modify the queries anymore) the report performance will be as expected.
    So far there're only two reports left where this does not solve the performance issue.
    During testing I have also observered the BIDS - SQL 2008 R2 Warnings not clearing-bug which can be reproduced by everyone except
    Microsoft ;)
    Regards,
    Gerald

  • Help - 'server too busy' errors suddenly occurring all over the place

    Have been using an application with no problem and no recent changes. Suddenly today (around 09:15 UK time) users started getting frequent error messages:
    Resource ID : 1 The request minimum guarantee is 0, maximum limit is 180 and the current usage for the database is 0. However the server is currently too busy to support request greater than 0 for this database.
    Server is jhzx0qn7ud.database.windows.net
    This has now continued for ~ 6 hours.

    Hi,
    Resource ID: 1. The %s minimum guarantee is %d, maximum limit is %d and the current usage for the database is %d. However, the server is currently too busy to support requests greater than %d for this database. See http://go.microsoft.com/fwlink/?LinkId=267637
    for assistance. Otherwise, please try again later.
    See the page: http://msdn.microsoft.com/en-us/library/windowsazure/dn338078.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/1541.windows-azure-sql-database-connection-management.aspx

  • AOL server too busy for iChat

    Greetings,
    I've created a new AOL account so I can access/use iChat. @mac.com account is no longer valid for use with iChat - I presume.
    Now I'm receiving AOL server too busy, try again in a few minutes - which has been going on all morning. Are there other "free" iChat alternatives that are better?
    Thanks!

    Hi,
    Resource ID: 1. The %s minimum guarantee is %d, maximum limit is %d and the current usage for the database is %d. However, the server is currently too busy to support requests greater than %d for this database. See http://go.microsoft.com/fwlink/?LinkId=267637
    for assistance. Otherwise, please try again later.
    See the page: http://msdn.microsoft.com/en-us/library/windowsazure/dn338078.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/1541.windows-azure-sql-database-connection-management.aspx

  • Migrated from MobileMe to iCloud. Sync works, but Find My ... reports no location, even though Location Services shows ON.

    I upgraded my iPhone and iPad to IOS5, migrated from mobile.me to iCloud, and deleted my mobile.me account from my devices under "Mail, Contacts, Calendars." My user name and password were different between mobile.me and the Apple Store account, so I used my Apple Store ID to activate iCloud.
    All syncing now works fine, but Find My iPhone reports "Location Services disabled." That is true for both my iPhone and iPad. Nevertheless, Find My iPhone is still able to send a message or sound to my devices, even though it cannot locate them.
    Find My iPhone is switched ON under the iCloud account on both devices, and is ON under Location Services. The only way I can get Find My iPhone to locate my devices is to re-enable mobile.me, but that is no solution since the mobile.me service is scheduled to end next year.
    Can you help unravel this for me?

    I think I solved it!  Remove the Ubiquity folder from ~/Library/Application Support/
    OSX will create a new one and locations services will work perfectly!  Well, it worked for me!
    I love using exclamation points!!!

  • Migrate from WD Java to WD ABAP in ESS Trips and Expenses

    Hi
    I got request to migrate from from Java to ABAP fof ESS trips and expenses. Could someone please give me a link to the documentation or any existing blogs?
    thanks

    bump...

  • I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

    I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

    You should call Apple but you should get an email from Apple. I got one a few minutes ago and this is what they said about AppleCare+ :
    Thank you for your recent iPhone 5 purchase at the Apple Store.
    We would like to let you know that every iPhone comes with one year of hardware repair coverage through its limited warranty and up to 90 days of complimentary support. AppleCare+ for iPhone extends your coverage to two years from the original purchase date of your iPhone and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee.
    We noticed you weren't given the opportunity to add AppleCare+ to your iPhone. If you would like to extend your coverage for only $99, please reply to this email by September 21st.
    After that date, if you would still like to purchase AppleCare+ within the first thirty days of receiving your iPhone, you can call AppleCare at 800-MY-IPHONE or visit an Apple Retail Store.
    Thank you for shopping with Apple.
    Sincerely,
    Apple Online Store Team

  • Can't migrate from mobileme to icloud

    I've been trying to migrate in the UK for over a week, but the 'servers are too busy'. Anyone else managed?can't migrate to icloud

    I am having the same problems to.  Contacted Apple Support they recommended logging out of Mobile ME then emptying the cache in Safari and logging back in thne ry to migrate.  This never worked.  They then recommended trying Firefox to make the migration.  This never worked.  Still get servers too busy message.
    Still unresolved.

  • Webaccess Document Access "Unable to process request. ..."

    GW 8.02 HP3
    Webaccess Agent Version 8.0.3 (11/30/2012)
    NW 6.5 SP3 fully patched - mta/poa/gwia/webaccess all on single box
    We're trying to allow documents within a limited set of shared folders to be viewed over webaccess. We have also given the user full rights specifically to both the shared folders and the documents. In the full Win Client 8.03 build 105538 the user can open the documents fine.
    However, trying to open any of the docs in web access return the error below:
    "Unable to process request. Please contact your system administrator."
    If you go to the documents tab in webaccess and search, then open the document from the results it works fine, but still fails from the shared folder.
    I've found a couple of TIDs regarding the error message, the first (7004454) is fixed by adding missing Spell Checker lines in the webacc.cfg file, all of ours are present.
    The 2nd (7007416) https://www.novell.com/support/kb/doc.php?id=7007416 says that hyphens "-" are not supported in domain names, I'm assuming this means internet domain names like [email protected]
    Is this correct!? Our domain has a hyphen in it and the 'fix' suggested is completely and utterly out of the question, all documents (over 10,000 of them) would be renumbered rendering all our document number tracking useless.
    Is this bug present in gw2012/2014? We were planning to migrate to OES Linux and upgrade to 2012 this summer but haven't scheduled this work as yet.
    Mark.

    In article <[email protected]>,
    MarkDissington wrote:
    > The 2nd (7007416) https://www.novell.com/support/kb/doc.php?id=7007416
    > says that hyphens "-" are not supported in domain names, I'm assuming
    > this means internet domain names like [email protected]
    >
    No, it is clearly for the GroupWise domains, so hopefully you didn't
    use hyphens in those too.
    Andy of
    KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please
    show your appreciation by clicking on the star below. Thanks!

  • Won't sell item at Store # 145 Heath Ohio. Said too busy to call Corporate

    On 12/13/14 around 7:30pm went to Best Buy Store # 145 Heath, Ohio. After looking to see what Amiibo's they had. I see they had one Diddy Kong on a hang tag(later confirmed it was actual Diddy Kong with SKU and price of 12.99 hang tag location). I went to check out and once the cashier scanned it for purchase a message on the register said can't be sold. She tried again and same thing. She called someone from gaming and he went to confirm where in store came from and then came back and said shouldn't be a problem. He tried scanning it himself and same thing. He went over to customer service and looked it up. He came back and said didn't see a reason can't be sold. He said will talk with the store manager and be right back. He came back and said the manager said can't be sold. He asked if still wanted it, I could talk with the manager myself. I said yes still want to purchase it. He went over the mic around his neck and said the customer wants to speak with the manager.
    Then a guy came to the front. He said was the manager (Jeramaha, sorry on spelling), he said as said before can't be sold. I asked why not, he first said was recalled and needs to be sent back. After asking why on shelf then, then said might not be entered in system correctly or something of that order and will need to be checked on with Corporate. He said for me to check back tomorrow. I told him over a hour drive away so just can't stop in to see why tomorrow. I said would you call Corporate now then. He said we are too busy to do that. I said what do you mean too busy. He repeated too busy but would put my name on it and hold it for me to pick it up tomorrow, so did that and he  attached my info to it. I said again hour away. He said it would be here for me then. I asked for his business card, he asked why. I said will need to contact Corporate then myself. He said why, can't sell something that can't be sold. I said, it's now not that. It's all the different reasons and not willing to check. He then said can get a store card on my way out at the desk at entrance
    I went to that desk(it's the security check desk). I asked a guy that was there for the card, he handed me a store card and asked why wanted it. I said the manager over there didn't have one. He said no I'm the manager and asked what's wrong. I told him trying to buy a item and they said can't sell it. He said let's go see why not. He went and got the item and then took me over to customer service. He went and looked on the computer and said can't be sold until 12/17 because it's not released yet. I asked why on shelf, said put out by mistake. I asked him why that guy told me to come back tomorrow to buy it, even knew over hour drive. He said don't know why he would do that, since can't be sold. I pointed to my info tag he put on it. He didn't say anything on that. I said that would be a wasted trip, he said good thing didn't do it. He proceeded to tell me can't be sold until then and didn't offer to hold it. I was dissappointed with that and then took my info tag back and left.
    Now wanted to add as too why posting on here:
    The first guy that represented himself as the manager had a Geek Squad shirt on and seem to just make up different reasons as to why not. That's why asked for him to check with Corporate.
    The response of too busy to call Corporate. To show how not busy that store was. There was two registers open and not once did they have me step away or take another customer. That's because all of that time with them checking on it, they didn't have any customers to ring out. The other lady at the next register wasn't even busy that she added that someone earlier came up with one and it wouldn't ring up. Even if too busy which wasn't the case, I feel should still do it for customer service.
    Then to tell the customer that recalled and will be sent back. Then a couple minutes later offer to take my info and hold it for me to pick up the next day. That makes no sense and made me feel, just making up as they go.
    Also to represent as the manager and wasn't, doesn't help. I don't even know if the other one was either, since he had a coat on.
    If something was put out by mistake that's fine. But to tell a cutomer will hold it and come back the next day to buy it and knowing they have over hour drive without knowing for sure could even be sold then. That's just wrong.
    Now as to the availability of this Diddy Kong Amiibo. Went to Gamestop right around the corner(right after leaving Best Buy 12/13) to check if they had it. They did, but sold the two that they had. The manager there named Ash said they are available to be sold and just hard to find, since so few sent to stores.

    Hello VanMan1987,
    Admittedly, the release dates and the coordination around Nintendo amiibo figures has been a bit of a challenge, to say the least. With release dates changing and there being so many different figures, it’s clear to me that some of our stores may have not been in a position to be able to speak confidently on what was going on with them, including putting figures out that aren’t yet able to be sold. What’s more clear to me is that your issue isn’t so much with the amiibo figures themselves, but how this whole situation was handled by the associates at the store. I sincerely apologize for the frustration you’ve endured here and I can’t thank you enough for sharing your experience in such great detail.
    We’ve received quite a bit of feedback in regards to the amiibo releases and we’ve been sharing this feedback with our gaming teams here at the Corporate Campus. However, I’m going to go one step further here and share your concerns directly with the leadership team at Store #145 in Heath, Ohio. If there was any misrepresentation going on, this is greatly frowned upon and there is absolutely no reason we should be misleading our customers and giving a false illusion of authority. While most of our associates should be able to assist with your issue, there are times a manager is needed and a manager is exactly what you should get when requesting one. I apologize further if you experienced otherwise.
    Lastly, I do apologize for the delay in response here. As you acknowledged, we’re a bit behind due to a higher Holiday volume and I regret that this gives the impression that we’re disregarding the situation. I absolutely assure you that’s not the case!
    If you still need any assistance here, please feel free to let me know.
    Sincerely,
    Brian|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Payment Process Request Status Report - Add Invoice Distribution Section

    Hi,
    I posted this in the E-Business Financial forum, but I think this is the right forum to seek for an answer to my question.
    In R12.1.3, I need to add Invoice Distribution details into "Payment Process Request Status Report" report. I know that function "Get_Docline_Ext_Agg" in package "IBY_FD_EXTRACT_EXT_PUB" needs to be extended, but I do not know how to do it when it involves adding a new level of records into the XML, assuming that an invoice line can have multiple distribution entries, the function return could not simply be an aggregate value but instead needs to be a collection of records, so I can loop throug them in the RTF tempalte using for-each statement.
    Please let me know if this makes sense and/or if you had to deal with a similar issue.
    Thanks,
    Sinan

    Hi,
    Is this the right forum to post this question?
    I would appreciate any comments.
    Thanks,
    Sinan

  • Request to post Icloud not working locations. for 2 days almost from Ventura CA. I think they are not being truthful about th eamount of folks affected!

    request to post Icloud not working locations. for 2 days almost from Ventura CA. I think they are not being truthful about the percentage of folks affected!
    and what's with the minimalist response? We're working on it for 2 days? You can do beter than that for exsisting loyal customers can't you?

    I just spoke to a Support person with Apple.  I got the same answer, "We Don't Know", "but they are working on it...Blah, Blah.  I too live in Ventura, and have been without email since yesterday approx. 3:00 pm.
    The guy said, it's the same if you brought your computer into the shop.  We have to determine if it's hardware, or software, then fix the problem.
    Well, What about a BACK UP SERVER?  No real answer to that one.  Just, "Thanks, for your Patience."
    This really blows!!!

Maybe you are looking for