ICM_HTTP_CONNECTION_FAILED error in SM59

Hi,
I configured ADS and it was working fine with http service.
Now i configured SSL in Java and ABAP instances.
I need to setup SSL communication between these 2 instances.
I did configuration for that but in SM59 when i do connection test for ADS_HTTPS RFC it is giving me an error ICM_HTTP_CONNECTION_FAILED.
Please can anybody guide me with a solution.
With Regards,
Pradeep.B

Hi
Take the help from these diffferent similar threads
1.ICM_HTTP_CONNECTION_FAILED
2.ICM_HTTP_CONNECTION_FAILED and Web Services
3.Elster XI HTTP error
Best Regards
Satish kumar

Similar Messages

"ICM_HTTP_CONNECTION_FAILED" Error SUP

Hi,
I am trying to establish a connection from SAP to SUP server with transection sm59. But im getting "ICM_HTTP_CONNECTION_FAILED" error with "sr000" message no. I ping the host and port successfully.
Connection profile:
Target Host : <Host>
Path Prefix : /dcn/HttpAuthDCNServlet
Service No. 8000 (i suppose its DCN http port)
user : supAdmin
pass: s3pAdmin
what might be the problem?
Thanks for your help in advance.

Chagne the username to
supAdmin@Admin
This should allow you to complete the test successfully

ICM_HTTP_CONNECTION_FAILED error while testing HTTP RFC in ECC 6 IDES

Hi Experts,
I have ECC 6.0 IDES system - new installation. I have created client 100 which is a copy of client 000. Being an IDES system, client 800 is automatically created.
While trying to connect this system to PI 7.1, I have created one HTTP RFC (H) in client 100 giving the details of PI system which is working perfectly fine. I have maintained the SLD details as well. But on testing the same RFC on client 800, its giving me the error as ICM_HTTP_CONNECTION_FAILED. I have created the user in PI which is maintained as well.
Even If I create a new HTTP RFC connection in client 800, its giving the same error again. User in 100 & 800 is same and both having maximum authorizations. Any opinions on why I am getting the above said error in Client 800?
Thanks & Regards,
Naresh.

Hi,
SMICM Trace file gives the following log when I am testing the HTTP Connection SAP_PID from SM59 of XYZ Client 100:
[Thr 896] IcmConnConnect: direct connect to <fully qualified hostname of PI system:50000>
[Thr 896] NiHsLGetNodeAddr: found hostname '<fully qualified hostname of PI system>' in cache
[Thr 896] NiIGetNodeAddr: hostname '<fully qualified hostname of PI system>' = addr xx.yy.zzz.lmn
[Thr 896] NiIGetServNo: servicename '50000' = port C3.50/50000
And when I am testing the same connection from SM59 of XYZ Client 800, getting the following log:
[Thr 4928] NiHsLGetNodeAddr: hostname 'proxy' not found by operating system
[Thr 4928] *** WARNING => Connection request from (55/18633/1) to host: proxy, service: 8080 failed (NIEHOST_UNKNOWN)
RM-T55, U18633, 800 ADMINISTRATOR, 19:18:49, M1, W2, SM59, 3/2 [icxxconn.c 2341]
I tried to take the restart of the system but still giving the same error.
Any suggestion???
Br,
Naresh.

Getting ICM_HTTP_CONNECTION_FAILED message in SM59.....?????

Hi,
I have set all the SSL and ICM related parameters in the instance profile. I have activated the HTTPS on 18040 port. also i have installed the SSL ceertificate in strust.
but im still getting the ICM_HTTP_CONNECTION_FAILED when trying to test the connection in SM59.
Any suggestions like what to look for ??
Thanks
Sourav

Hi Sourav,
Just refer this blogs, hope this should help you out.
INTEGRATION_DIRECTORY_HMI: Connection fails
ICM_HTTP_CONNECTION_FAILED
SAF - ICM_HTTP_CONNECTION_FAILED
HTTP adapter setup
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Process Integration (PI) & SOA Middleware
Or just refresh your cache
https://websmp201.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Or You should check whether the HTTP service is working on your system.
transaction smicm -> goto -> services. check the entry for HTTP. If necessary, a restart of the J2EE server might help.
Also check the http adapter is active.
transaction sicf -> default_host->sap->xi->adapter_plain
This should solve your problem,
Reward if useful.
Thanks
Younus

WSPUBLISH : ICM_HTTP_CONNECTION_FAILED error when publishing webservice

Dear Friends,
We are trying to publish a webservice via tcode WSPUBLISH.
The first step regarding the service registry and service port is successful.
The following error occurs in step 2 :
Error retrieving Services Registry (SR) version information.
DETAIL:
    SOAP:1,023 SRT: Processing error in Internet Communication Framework:
    ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
The logical port has been created and the 'test connection" via SM59 is also successful.
Prior to WSPBLISH, the SOAMANAGER and WSPARAM steps have been followed as per SAP help documentation.
Please suggest how to resolve this issue.
Regards,
TS

Hi Juan,
The dev_icm trace is attached below. The authorization checks are failing when attempting to signon to ICM via the SAP MMC. I have tried quite a few options for the user. What is the right user id to use?
trc file: "dev_icm", trc level: 1, release: "700"
sysno      00
sid        J2E
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    235
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        3668
[Thr 3664] Thu Mar 11 15:01:18 2010
[Thr 3664] TRACE FILE TRUNCATED
[Thr 3664] started security log to file dev_icm_sec
[Thr 3664] ICM running on: SAPx64.ritam.com
[Thr 3664] MtxInit: 30001 0 2
[Thr 3664] IcmInit: listening to admin port: 64998
[Thr 3664] Thu Mar 11 15:01:19 2010
[Thr 3664] DpSysAdmExtCreate: ABAP is active
[Thr 3664] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
[Thr 3664] DpShMCreate: sizeof(wp_adm)          29792     (1752)
[Thr 3664] DpShMCreate: sizeof(tm_adm)          5912704     (29416)
[Thr 3664] DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
[Thr 3664] DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
[Thr 3664] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
[Thr 3664] DpShMCreate: sizeof(comm_adm)          552080     (1088)
[Thr 3664] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
[Thr 3664] DpShMCreate: sizeof(slock_adm)          0     (104)
[Thr 3664] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
[Thr 3664] DpShMCreate: sizeof(file_adm)          0     (72)
[Thr 3664] DpShMCreate: sizeof(vmc_adm)          0     (1864)
[Thr 3664] DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
[Thr 3664] DpShMCreate: sizeof(gw_adm)     48
[Thr 3664] DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000001D40050, size: 6614144)
[Thr 3664] DpShMCreate: allocated sys_adm at 0000000001D40050
[Thr 3664] DpShMCreate: allocated wp_adm at 0000000001D42270
[Thr 3664] DpShMCreate: allocated tm_adm_list at 0000000001D496D0
[Thr 3664] DpShMCreate: allocated tm_adm at 0000000001D49730
[Thr 3664] DpShMCreate: allocated wp_ca_adm at 00000000022ECFB0
[Thr 3664] DpShMCreate: allocated appc_ca_adm at 00000000022F2DB0
[Thr 3664] DpShMCreate: allocated comm_adm at 00000000022F4CF0
[Thr 3664] DpShMCreate: system runs without slock table
[Thr 3664] DpShMCreate: system runs without file table
[Thr 3664] DpShMCreate: allocated vmc_adm_list at 000000000237B980
[Thr 3664] DpShMCreate: allocated gw_adm at 000000000237BA00
[Thr 3664] DpShMCreate: system runs without vmc_adm
[Thr 3664] DpShMCreate: allocated ca_info at 000000000237BA30
[Thr 3140] IcmProxyWatchDog: proxy watchdog started
[Thr 3664] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[Thr 3664] IcmCreateWorkerThreads: created worker thread 0
[Thr 3664] IcmCreateWorkerThreads: created worker thread 1
[Thr 3664] IcmCreateWorkerThreads: created worker thread 2
[Thr 3664] IcmCreateWorkerThreads: created worker thread 3
[Thr 3664] IcmCreateWorkerThreads: created worker thread 4
[Thr 3664] IcmCreateWorkerThreads: created worker thread 5
[Thr 3664] IcmCreateWorkerThreads: created worker thread 6
[Thr 3664] IcmCreateWorkerThreads: created worker thread 7
[Thr 3664] IcmCreateWorkerThreads: created worker thread 8
[Thr 3664] IcmCreateWorkerThreads: created worker thread 9
[Thr 3192] IcmWatchDogThread: watchdog started
[Thr 3200] *** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject not set => do not trust any intermediary
X.509 cert data will be removed from header [http_plg.c   743]
[Thr 3200] Thu Mar 11 15:01:20 2010
[Thr 3200] ISC: created 400 MB disk cache.
[Thr 3200] ISC: created 50 MB memory cache.
[Thr 3200] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
[Thr 3200] HttpExtractArchive: files from archive D:\usr\sap\J2E\DVEBMGS00\exe/icmadmin.SAR in directory D:/usr/sap/J2E/DVEBMGS00/data/icmanroot are up to date
[Thr 3200] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=1, flags=4101) for /sap/admin:0
[Thr 3200] CsiInit(): Initializing the Content Scan Interface
[Thr 3200]            PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
[Thr 3200] CsiInit(): CSA_LIB = "D:\usr\sap\J2E\DVEBMGS00\exe\sapcsa.dll"
[Thr 3200] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=2, flags=12293) for /:0
[Thr 3200] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=3, flags=4101) for /:0
[Thr 3200] HttpSubHandlerAdd: Added handler HttpJ2EEHandler(slot=4, flags=1077253) for /:0
[Thr 3200] Started service 8000 for protocol HTTP on host "SAPx64.ritam.com"(on all adapters) (processing timeout=60, keep_alive_timeout=30)
[Thr 3200] Thu Mar 11 15:01:25 2010
[Thr 3200] IcmNetCheck: network check passed without detecting problems
[Thr 3128] Thu Mar 11 15:02:20 2010
[Thr 3128] *** WARNING => IcmCallAllSchedules: Schedule func 1 already running - avoid recursion [icxxsched.c 430]
[Thr 3156] Thu Mar 11 15:02:29 2010
[Thr 3156] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (rc=500)- please check node in TA sicf [icxxman.c    2245]
[Thr 3664] Thu Mar 11 15:02:33 2010
[Thr 3664] HttpSAPR3SetParam: switch j2ee http port from to: 50000
[Thr 3664] HttpSAPR3SetParam: switch j2ee https port from to: 50001
[Thr 3664] Thu Mar 11 15:05:06 2010
[Thr 3664] HttpSAPR3SetParam: Switched j2ee status to: 1
[Thr 3152] Thu Mar 11 15:15:05 2010
[Thr 3152] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
[Thr 3152] *** ERROR => HttpAdmHandleReq: authorization failed for user: j2ee_admin [http_adm.cpp 1035]
[Thr 3132] Thu Mar 11 15:15:17 2010
[Thr 3132] *** ERROR => HttpAdmHandleReq: authorization failed for user: sapuser [http_adm.cpp 1035]
[Thr 3180] Thu Mar 11 15:15:29 2010
[Thr 3180] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm_admin [http_adm.cpp 1035]
[Thr 3160] Thu Mar 11 15:15:50 2010
[Thr 3160] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
[Thr 3160] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm_admin [http_adm.cpp 1035]
[Thr 3180] Thu Mar 11 15:17:16 2010
[Thr 3180] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
[Thr 3180] *** ERROR => HttpAdmHandleReq: authorization failed for user: icmadmin [http_adm.cpp 1035]
[Thr 3156] Thu Mar 11 15:17:30 2010
[Thr 3156] *** ERROR => HttpAdmHandleReq: authorization failed for user: icmadmin [http_adm.cpp 1035]
[Thr 3128] Thu Mar 11 15:18:06 2010
[Thr 3128] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
[Thr 3128] *** ERROR => HttpAdmHandleReq: authorization failed for user: webadm [http_adm.cpp 1035]
[Thr 3160] Thu Mar 11 15:18:13 2010
[Thr 3160] *** ERROR => HttpAdmHandleReq: authorization failed for user: webadm [http_adm.cpp 1035]
[Thr 3152] Thu Mar 11 15:18:25 2010
[Thr 3152] *** ERROR => HttpAdmHandleReq: authorization failed for user: http_admin [http_adm.cpp 1035]
[Thr 3128] Thu Mar 11 15:20:04 2010
[Thr 3128] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
[Thr 3128] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm admin [http_adm.cpp 1035]
[Thr 3124] Thu Mar 11 15:20:15 2010
[Thr 3124] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm_adm [http_adm.cpp 1035]
[Thr 3152] Thu Mar 11 15:20:17 2010
[Thr 3152] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm_adm [http_adm.cpp 1035]
[Thr 3132] Thu Mar 11 15:20:29 2010
[Thr 3132] *** ERROR => HttpAdmHandleReq: authorization failed for user: icmadm [http_adm.cpp 1035]
[Thr 3180] Thu Mar 11 15:20:39 2010
[Thr 3180] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
[Thr 3180] *** ERROR => HttpAdmHandleReq: authorization failed for user: admin [http_adm.cpp 1035]
Regards,
TS

ICM_HTTP_CONNECTION_FAILED Error 400

Hello All,
i have one synchronous interface on production system.
it was running fine till now.
But on Sunday we got around 1000 messages in SMQ2.
they all are in same queue.
But now same interface is running successfully....... (through another queue)
Now how can resend these 1000 messages?
1st message is in Automatic restart mode & has error:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
Remaining messages are in scheduled Mode.
Its urgent...Plz help.
Thanks,
Maheshwari.

Hi Maheshwari,
Statuses such as HOLDING or FAILED usually happen only for delivery semantics EOIO (exactly once in order) or BE (best effort means Asynchronous). TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue. This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>/<PROTOCOL>
The MS returns HTTP 200 to the Integration Server only if this was executed successfully. In this example scenario, status TO_BE_DELIVERED should not appear since we assume that the IS has called the servlet successfully.
The status is updated from TO_BE_DELIVERED to DELIVERING when the message has popped out of the receive queue and the event handler lookup was successful, so there is a small gap where TO_BE_DELIVERED could remain in the message monitor, although it was delivered from IS successfully.
if you face Blocked Queues (SYSFAIL), Incoming Messages are blocked then follow the steps
1.) Go to SMQ2 (qRFC monitor) and execute
2.) If there is a queue not moving, double click on queues til you see the status. SYSFAIL due to error move to the right to see the error text
If error is due to cache not refreshed:
1.) Go to transaction SXI_CACHE and check if CACHE is not up to date In this case, CACHE contents are up-to-date.
2.) If CACHE is not up to date, click Refresh before refreshing the cache just in case someone else already did it. If still not up to date, click Start Delta Cache Refresh in XI Runtime Cache.
If CACHE is already up to date as seen above, proceed to next steps.
3.) Then, go back to SMQ2. Unlock the queue that is in SYSFAIL. To do this:
a.) Choose the queue that is in SYSFAIL.
b.) Click unlock icon
4.) Then, double click in the queue name til you go to the user.
5.) Double click on the user to go to the message in error
6.) Select the one in error
7.) Click restart and refresh to see if the message will be processed successful.
If error text is due to JCo failure (Java connector)
When J2EE is already up, do the following:
1.) Just go inside the queue in error til you go to the user.
2.) Double click on the user to go to the message in error.
3.) Click/Choose the message in error (just going to the right for the error message, it is JCo failure related)
4.) Restart the message (retaining the trace level)
6.) Check for the status of the XML if it is now processed.
7.) Then, click F3 or back til you go back to the queue in SYSFAIL.
8.) Then, reset status of the LUW of the queue in SYSFAIL.
After that, it could be seen that queues are now in RUNNING status.
Go to SM59 and create a RFC destination with the connection type G and service no as 80 and website name in the target host field and approipriate path prefix in path prefix field.
Ex:https://www.sdn.sap.com/sdn/collaboration.sdn should be in target host and /sdn/collaboration.sdn in path prefix.
check in R/3:
SCIF: Is the service sap/xi/engine activated?
SU01: Is user XIAFUSER not blocked and has suitable rights?
Also refer these threads ;
INTEGRATION_DIRECTORY_HMI: Connection fails
ICM_HTTP_CONNECTION_FAILED
SAF - ICM_HTTP_CONNECTION_FAILED
HTTP adapter setup
Answer by Wolfgang Janzen
SSL certificates not visible while RFC destination creation
ICM_HTTP_SSL_ERROR
Please can you check if this is of any help.
ICM_HTTP_SSL_ERROR
HTTP-ADAPTER with HTTPS = ICM_HTTP_SSL_ERROR
SSL: Client Certificate
SSL: Client Certificate
Check out this SAP Note- 824554 and OSS Note 554174 SAP Note- 852688
Thread
To Be Delivered
XI : How to Re-Process failed XI Messages Automatically
Regards,
Vinod.

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon              Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program sapfallback not registered
Error Details     LOCATION: SAP-Gateway on host filip / sapgw00
Error Details     DETAIL: TP sapfallback not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1483
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1694
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Mar 31 02:44:35 2009
Error Details     VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

Error in SM59 TCP/IP connection after kernel upgrade to 215..

Hi
We recently upgraded our kernel to patch 215(NW 7.0)..
We built the kernel by first taking the entire kernel stack( level 201) and then patched it with dw, enserver, lib_dbsl, tp, r3trans, r3inlpgm, saposcol with level = 215 except for lib_dbsl, which is 214 and enserver which is 207...
After the upgrade to this new level, we have a SM59 TCP/IP connection which calls an RPG program located in /qsys.lib/..(start on application server radio option), which has stopped working...
Now this RFC doesn't work anymore...
When we test it, it shows us the following:
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host sapdev.ny..... / sapgw00
Error Details     DETAIL: no connect of TP /qsys.lib/rtcimo.lib/RFC000.pgm from host sapdev.ny.....
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1537
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6255
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Aug 18 23:09:46 2009
Error Details     VERSION: 2
We have another system in which tp is at patch 169 and it works fine...
Looks like something changed with the kernel/tp patch...
doesn't show anything in the sm21 log..in the work process log for dev_rd..
MtxInit: -2 0 0
Mon Aug 17 16:00:47 2009
GwDpInit: attached to gw_adm at 70000008059bae0
DpSetProcessPriority: Run priority for gwrd adjusted to 12
Tue Aug 18 14:35:09 2009
ERROR => GwISearchPartner: timeout, partner LU: >%%SAPGUI%%<, TP: >saphttp< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: %%SAPGUI%%, conv ID: 22575469 [gwr3cpic.c   6225]
Tue Aug 18 17:25:25 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny....., conv ID: 32824524 [gwr3cpic.c   6225]
Tue Aug 18 17:29:30 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, conv ID: 33074744 [gwr3cpic.c   6225]
Tue Aug 18 17:40:29 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, conv ID: 33722803 [gwr3cpic.c   6225]
Tue Aug 18 22:52:39 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
Tue Aug 18 22:52:40 2009
ERROR => GwISearchPartner: HOST: sapdev.ny......, , conv ID: 52504488 [gwr3cpic.c   6225]
Tue Aug 18 23:09:46 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, , conv ID: 53534925 [gwr3cpic.c   6225]
Has anyone seen anything like this??
Please let us know..
Thanks
sap ques...
Edited by: sap ques on Aug 19, 2009 5:23 AM
Edited by: sap ques on Aug 19, 2009 5:25 AM

This error may be due to kernel patch level. You can try some other patch level. If you can raise an OSS message with SAP, they can tell you exactly which Kernel patch will solve your problem.

ICM_HTTP_CONNECTION_FAILED error in file to proxy??

Hi
In my file to proxy,
i am maintaining one Http RFC destination..intest Connection i am getting 500 as status.
two TCP/IP destinations LCRSAPRFC and SAPSLDAPI.
i am maintaing values in SPROXSET table.
in SLDAPICUST also.
and in SXMB_ADM i configuerd Integration engine.
but i am getting error in sxmb_moni
SAP:P4></![CDATA[>
<SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://dcexi0605.aaaa.com:8030/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://dcexi0605.aaaa.com:8030/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://dcexi0605.aaaa.com:8030/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br><hr><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed Feb 28 12:28:10 2007 </td></tr> <tr><td>Module:</td><td>icxxconn_mt.c</td></tr> <tr><td>Line:</td><td>2121</td></tr> <tr><td>Server:</td><td>ciBGX30_BGX_30</td></tr> <tr><td>Detail:</td><td>Connection request from (42/31087/0) to host: dcesssss08.aaaa.biz, service: 8010 failed (NIECONN_REFUSED) AP-T42, U31087, 100 SOA_AAA, M2B-36-D-1787, 12:28:10, M0, W2, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack><b>Error when receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</b></SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
please guide me where i did mistake
regards
Ram

hi friends..
now i am getting HTTP_RESP_STATUS_CODE_NOT_OK HTTP response contains status code 403 with the description Forbidden Error when sending by HTTP (error code: 403, error text: Forbidden)
i maintaind in RZ10 the values.intially port is 8100 , now i changed it 8000
in sxmb_adm..
corresponding Integarion server:
http://hostname:8030/sap/xi/engine?type=entry
the same value is maintained in Sproxset table also
in SMICM -Services Http services port is 8000
please suggest me
regards
Ram

Connection error in SM59

Hi,
we have written a script with multiple parameters.when ever we will try to execute the Script with the parameters it is working fine.
but whenever we will executing it through the transaction SM49 we are getting the below error.
error details:
connecting to server....
connection denied#
connection denied#
connection closed
can anybody let us know how can we execute the script with multiple parameters through Transaction SM49.
Regards,
Vishal

you can debug this at sm59.
1. Go to "RFC" and delete Trace.
2. execute your Sm59 check
3. Go to "RFC" and view Trace.
maybe it´s helpful.

ICM_HTTP_CONNECTION_FAILED message in SM59 (ABAP Proxy Connection)

Hi All,
Recently, i got a problem with our XI server, suddently the ABAP proxy connectiont to XI from another SAP server was failed. i was check from sm59 the HTTP connection return me ICM_HTTP_CONNECTION_FAILED.
i already check the port and calling this link http://demokl:8001/sap/XI/engine?type=entry from the other server it is working fine. but still got problem from SM59.
Please help.
Regards
Fernand

Hi jagadish,
These are my parameters :
Connection Type = (H) HTTP Connection to ABAP System
Target host = demokl (hostname)
Path Prefix = /sap/XI/engine?type=entry
Service       = 8001
Language   = EN
Client        = 300
User          = PIAPPLUSER
Previously was working fine, but suddently go problem. but i was trying to create HTTP connection from XI Box itself it is working fine but from others box didn't work.
i have check the port it is open.
Please help
Regards
Fernand

ICM_HTTP_CONNECTION_FAILED Error

Hi,
I am trying CRM Mobile Sales With SUP.
the device is registered but data not flowing to device. when checked in subscription monitering i am getting below error .
Exception occurred due to http communication failure SDOE_ESDMA
14.09.2011 08:38:15 400 - ICM_HTTP_CONNECTION_FAILED -
Queue also blocked in SMQ2 with same error.
I checked the below thread
Exception occurred due to http communication failure
and tried the following.
1)telnet from DOE to SUP successful u2013 on port 8000
2)telnet from SUP to DOE successful u2013 port 8000
3)firewall is disabled in SUP .
4) Also checkd the enteries for hostname and IP adress in table SDOE_WSE_HOST . Enteries are present in the table.
Kindly let me know the solution.
Regards,
Kanagaraj.

No. we are not using proxy.
Regards,
Kanagaraj

ICM_HTTP_CONNECTION_FAILED Error while executing WebService

Hi,
Can anybody tell me why i am getting the error while i am trying to execute the webservice which i have created via se80.
<?xml version="1.0" encoding="utf-8" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<SYSTEMFAULT href="#o103" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_AI_SYSTEM_FAULT id="o103">
- <CX_ROOT>
<TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>306</PROGID>
<CONTID>993</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_AI_SYSTEM_FAULT>
<CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>
<CODE>SOAP:1.023</CODE>
<b> <ERRORTEXT>SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")</ERRORTEXT></b>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
</asx:heap>
</asx:abap>

Arpit,
I am pretty sure that you have a network issue. Your ICM/ICF is up an running. Receives a request from your client program (the one using your proxy class), tries to connect to the URL you specified and fails to receive an answer.
It's like calling a URL in your browser and not receiving an answer. So, if it's not the proxy, you maybe have a firewall issue, a nameserver issue or something in this area.
If you had a different problem, say you misspelled the service name or something you would get another error like CONNECTIONREFUSED or something.
I'd investigate network issues.
regards,
anton

ICM_HTTP_CONNECTION_FAILED error on http receive method

Hi,
I am trying to read a XML via http. I have developed a code referencing this blog:
/people/rashid.javed/blog/2007/03/11/cricket-world-cup-http-client-and-simple-transformations
When http receive method is executed it gives me an error.
On executiong of: CALL METHOD client->receive it gives error:
code:    400 message: ICM_HTTP_CONNECTION_FAILED
I treid changing host and buf in code below both to http://www.google.com to rule out the possibility of bad url. Also tried setting time out to 500 in send method. Still no luck.
ICM trace shows following:
Thr 4864] *** WARNING => Connection request from (16/6462/1) to host: http://www.google.com/, service: 80 failed (NIEHOST_UNKNO
How do I solve this error, please give me some tips.
I was looking forum for this issue but was not able to find a solution.
Here is complete code:
DATA: client TYPE REF TO if_http_client.
DATA: host TYPE string.
* DATA: proxyh TYPE string VALUE 'IfYouHave.Proxy.com',
*      proxyp TYPE string VALUE '8080'.
DATA: buff TYPE string,
      respd TYPE string.
DATA: subrc TYPE sysubrc.
CALL METHOD cl_http_client=>create
EXPORTING
    host               = 'http://www.google.com/ig/api'
*    SERVICE            =
*    proxy_host         = proxyh
*    proxy_service      = proxyp
*    SCHEME             = SCHEMETYPE_HTTP
*    SSL_ID             =
*    SAP_USERNAME       =
*    SAP_CLIENT         =
IMPORTING
    client             = client
EXCEPTIONS
    argument_not_found = 1
    plugin_not_active = 2
    internal_error     = 3
    OTHERS             = 4
IF sy-subrc <> 0.
WRITE:/ ' cl_http_client=>create, subrc = ', sy-subrc.
EXIT.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
buff = 'GET'.
CALL METHOD client->request->set_header_field
    EXPORTING
      name = '~request_method'
      value = buff.
buff = 'http://www.google.com/ig/api?weather=21218&hl=en'.
cl_http_utility=>set_request_uri( request = client->request
                                    uri     = buff ).
subrc = cl_http_utility=>get_last_error( ).
IF subrc <> 0.
    WRITE: / 'Wrong URI format'.
    EXIT.
ENDIF.
ENDIF.
CALL METHOD client->send
* EXPORTING
*    TIMEOUT                    = CO_TIMEOUT_DEFAULT
EXCEPTIONS
    http_communication_failure = 1
    http_invalid_state         = 2
    http_processing_failed     = 3
    http_invalid_timeout       = 4
    OTHERS                     = 5
IF sy-subrc <> 0.
CALL METHOD client->get_last_error
    IMPORTING
      code    = subrc
      MESSAGE = buff.
WRITE: / 'communication_error( send )',
         / 'code: ', subrc, 'message: ', buff.
EXIT.
ENDIF.
CALL METHOD client->receive
EXCEPTIONS
    http_communication_failure = 1
    http_invalid_state         = 2
    http_processing_failed     = 3
    OTHERS                     = 4.
IF sy-subrc <> 0.
CALL METHOD client->get_last_error
    IMPORTING
      code    = subrc
      MESSAGE = buff.
FORMAT COLOR COL_BACKGROUND.
WRITE: / 'communication_error( receive )',
         / 'code: ', subrc, 'message: ', buff.
WRITE: / 'communication_error'.
EXIT.
ENDIF.
respd = client->response->get_cdata( ).
WRITE:/ respd.
Thanks in advance,
CD
Edited by: CD on Feb 19, 2009 1:46 PM

Check this link..
[HTTP client code 400 reason ICM_HTTP_CONNECTION_FAILED;

"ICM_HTTP_CONNECTION_FAILED" error for cross catalog search

We are running SRM 7.0 SP 08.
I have set up the external web services to access multiple external product catalogs to create shopping carts. These individual catalogs work fine for SC creation. (BTW, we removed the parameter for HOOK_URL as it seems to be not required starting SRM7).
However, when we are trying to run "cross catalog search", either from SC creation wizard or from normal SC creation screen, the popup window would appear with search in progress, but always return no result with detail message: "ICM_HTTP_CONNECTION_FAILED" for all catalogs.
I have debugged the scenario, and the error seems to be from FM /SAPSRM/PDO_CCS_BCKGRSEARCH, which is called in a background task. The statement that got the error is the following, with return code 1.
    CALL METHOD lv_res_client->receive
      EXCEPTIONS
        http_communication_failure = 1
        http_invalid_state         = 2
        http_processing_failed     = 3
        OTHERS                     = 4.
Could you shed some light as to what might have been the problem?
Thanks for your help.

We are running SRM 7.0 SP 08.
I have set up the external web services to access multiple external product catalogs to create shopping carts. These individual catalogs work fine for SC creation. (BTW, we removed the parameter for HOOK_URL as it seems to be not required starting SRM7).
However, when we are trying to run "cross catalog search", either from SC creation wizard or from normal SC creation screen, the popup window would appear with search in progress, but always return no result with detail message: "ICM_HTTP_CONNECTION_FAILED" for all catalogs.
I have debugged the scenario, and the error seems to be from FM /SAPSRM/PDO_CCS_BCKGRSEARCH, which is called in a background task. The statement that got the error is the following, with return code 1.
    CALL METHOD lv_res_client->receive
      EXCEPTIONS
        http_communication_failure = 1
        http_invalid_state         = 2
        http_processing_failed     = 3
        OTHERS                     = 4.
Could you shed some light as to what might have been the problem?
Thanks for your help.

ICM_HTTP_CONNECTION_FAILED error in SM59

Similar Messages

Maybe you are looking for