Id no coincide con IMEI, id no coincide con IMEI

el ID no coinciden Con El ID de manzana, ya Cambien claves

hola yo tambien necesito mrecuperar contraseña de icloud y es diferente a la de apple ,

Similar Messages

No me coincide la hora toma de datos con la hora PC

Hola a todos.
Tengo una duda y es que no sé porqúe no me coincide la hora con la que la gráfica almacena un dato con la hora en la que el dato es guardado en el PC debería ser cada 0,5s y hay valores que casi son de 0,46s entre dato y dato.
Adjunto una imagen y el -vi.
Por cierto ¿porqué no me carga el número de etapa y siempre marca 0?
Gracias por vuestra ayuda.

Hola nanoalberto.
Creo que el problema puede venir por cómo esta el flujo de tu programa.
LabVIEW sigue el flujo de datos para controlar la ejecución. Es decir, las funciones solo estan restringidas por el órden en el que requieren datos, por lo que la manera en que cableas el VI afecta en que órden se ejecuta. Al agregar variables locales para conectar datos, como esta en tu programa, rompes ese flujo de datos, por lo que puede que la parte derecha de tu código se ejecute antes de la parte izquierda y lea datos un poco anteriores.
Un buen primer paso es que en todas las variables locales que tienes, las cambies por un cable directo, como pongo a continuación.
Esta liga te puede ser de interes: http://www.ni.com/white-paper/7517/en/
Espero esto te sea de utilidad.
Aldo H
Ingenieria de Aplicaciones
Adjuntos:
1.PNG ‏27 KB
2.PNG ‏24 KB

El país en el que se adquirió esta tarjeta no coincide con el país de su ID de Adobe

That´s the sentence that apears when I introduce the validation code my brother bought me from the UUEE, I´m in Spain.
Thanks!!

Thank you Rajshree!
Do you know what can I do?
Regards!!
El 10/03/2014, a las 19:39, Rajshree <[email protected]> escribió:
Re: El país en el que se adquirió esta tarjeta no coincide con el país de su ID de Adobe
created by Rajshree in Adobe Creative Cloud - View the full discussion
Hi Noemyh,
Welcome to Adobe Forum,
The Adobe ID is from New York, USA where as you are in Spain. The Creative Cloud is suspended status.
Regards,
Rajshree
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6196407#6196407
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6196407#6196407
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6196407#6196407. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Perchè la data delle applicazioni scaricate non coincide con il giorno in cui io l'ho fatto?

la data delle applicazioni non corrisponde al giorno in cui io le ho scaricate
sono io a non capire? c'è una spiegazione? o il mio mac deve essere regolato?
grazie

La sola cosa disastrosa che leggo è il tuo commento.
In primis dovresti conoscere la differenza tra la garanzia legale del rivenditore e quella del produttore: nel caso di Apple la garanzia limitata di un anno va ad AGGIUNGERSI a quella legale del rivenditore.
Continuo:
-hai pagato per parlare con un numero verde? Il numero per l'assistenza è totalmente gratuito, quindi spiegami che numero hai chiamato.
-dici che l'iPad non funziona, però non aggiorni il sistema operativo perché la tua autorità si sostituisce a quella di chi lancia i nuovi aggiornamenti. E paghi per farti dire che iOS va aggiornato. Sei bravo.
-iOS 7 fa schifo? Deduco quanto poco sai utilizzare gli oggetti che hai acquistato al meglio delle loro potenzialità, figuriamoci se sei in grado di giudicarle.
Per il futuro ti consiglio di leggere i termini e le condizioni d'uso dei prodotti che acquisti.
Nel caso del tuo iPad avresti trovato tutto qui:
http://www.apple.com/legal/warranty/products/ipad-italian.html
avresti avuto così modo di informarti su cosa acquisti, anzichè lamentarti in seguito.
P.S. "Alterazioni del software"? Semplicemente i software si aggiornano, migliorano, cambiano.
Se non vuoi essere schiavo di alcun sistema operativo torna al Nokia 3330.

La hora en el salvapantallas no coincide con el restactugulo y esta entrecortada.

Quisiera saber porqué mi Mac Book Pro, en el salvapatallas no encaja en el rectangulo de la hora ,que aparece descentrado de su rectangulo y entrecortado.. Deberé ir a mi tienda apple para que me lo corrigan..

Estimados,
OJO con ejecutar los procesos REESTABLECER pues estos procesos solo deben ser ejecutados si algún consultor de Soporte SAP lo autoriza.
lo que corresponde en estos casos, es:
a) ingresar el problema en Soporte SAP a través del canal de soporte SAP formal, lo cual no es este FORO.
b) ver junto a estos consultores la forma de resolver el problema.
Imaginen que en vez de resolver el problema lo empeoras, alli si tendrás problemas.
saludos

Hola el problema con mi ordenador es que cambie mi contraseña y ahora no coincide no se como restaurar esto ayúdenme?

desde hace ya varios dias no puedo ingrasar a mi ordenador pues me pide el usuario y contraseña alguien sabe como recuperarlo

If your iCloud ID is correct but you put the wrong ID in your phone, sign out of iCloud on your phone by going to Settings>iCloud and clicking 'Delete account'. Then sign in with the correct ID.
If your iCloud ID is incorrect you must create a new iCloud account with the correct ID.
Si su iCloud ID es correcta pero puso el ID mal en su teléfono, la sesión de iCloud en su teléfono, vaya a Ajustes> iCloud y haciendo clic en "Eliminar cuenta". Luego inicia sesión con el ID correcto.
Si su iCloud ID es incorrecto debe crear una nueva cuenta de iCloud con el codigo correcto.
(Translation by Google)

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoyi

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
== This happened ==
Every time Firefox opened
== possibly when the most recent updates were installed, a few days ago

Thanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source.

How to Create Multiple Calendar Exceptions Which Occasionally Coincide

Ok so here's my situation
I have a group of schedules that currently have technical work and routine meetings and I am working in Project Standard 2010. I am not a fan of including meetings in technical schedules especially the recurring variety that represent informal tag-ups.
However, the team that is working the actual schedule has a significant portion of their work day captured by meetings. They want to be able to resource level, but they have to also be able to show the impact of their meeting obligations on their
ability to complete technical work.
So originally I was going to have these meetings entered as recurring events in the schedule; their periodicities were various. Some meetings were daily, some weekly, some monthly. But it became clear to me that this approach was going to become
unsustainable. With schedules that extend out a full calendar year, the daily and weekly meetings in particular became voluminous numbering in the thousands; in some cases representing 2/3 of all the schedule activities.
This makes timely tacking, updating, and statusing of these schedules un-achievable. I searched on the web and was given a clever suggestion: to create a resource calendar with recurring exceptions that represented meeting obligations for a resource.
I liked the idea but there was a problem. When I was testing the idea I wanted to see what would happen if a resource had multiple exceptions (representing multiple meetings) that coincided on the same day. Would Project recognize all of the
exceptions? So I created a resource named "Bob" and gave him
-a daily exception with a work day defined from 9:00-12:00 and 1:00-5:00 (to represent an 8:00 hourly meeting)
-a weekly exception with a work day defined from 8:00-12:00 and 1:00-4:00 (to represent a 4:00 hourly meeting)
-a monthly exception with a work day defined from 8:00-11:00 and 1:00-5:00 (to represent an 11:00 hourly meeting)
I ensured that the weekly and monthly exceptions happened on Mondays, and then I found a Monday were all 3 exceptions would be in effect. I schedule an activity to begin on the date, and then applied Bob to that activity. Then I went to the Resource
Usage view to Bob's hours, and instead of reflecting that Bob could only do 5 hours of work, it showed that Bob could do 7 hours of work.
It appeared that Project 2010 would only honor one exception at a time, and it appeared to do it in a hierarchy... first daily exceptions, then monthly exceptions, then weekly exceptions. Is that simply how it works in Project 2010? Can only
one exception be honored at a time? And if there are coinciding exceptions, does Project 2010 start with the daily exception first?

Guillaume,
Most people who have familiarity with scheduling agree with John, you, and myself; that the attempt to schedule, track,
status, and update routine meetings is probably ill-advised. I thought about doing something a long the lines of what you are suggesting (if for no other reason because it would make my life easier) to just reduce their percentage availability.
I may ultimately present that also as an alternative. My solution right now is to create exceptions to the
exception. Meaning: If I have a daily, weekly, and monthly exception, then I consider my daily meeting to be "The Exception" (because it has the highest frequency of occurrence), and my weekly and monthly meetings are exceptions to "The Exception". On
the days when a weekly and/or monthly meeting coincide with a daily meeting, I just add all of their outages together and create an exception to "The Exception" on that day. Theoretically this should work, I was just hoping for a more elegant solution.
I was hoping someone would say, "oh yeah, you just go to options and select 'Merge Exceptions' and you're good to go".

Is there a way to undo "autofill" so that all the songs, artists, albums, etc on my iPod touch 4th gen coincide/are synchronized again?

I don't know if you can help me, but I erroneously clicked on "auto fill" under the "on this ipod" category of the itunes screen that's located on my desktop. As a result, all the songs, albums, artists, etc., are now out of sync, don't coincide with one another, and when I touch a song to play on my ipod touch (fourth generation) it flips to a different artist/song and plays it automatically. Is there any way I can undo this, and if so, how? This occurred while I was purchasing/downloading music onto my iPod, and the usb cord was plugged into the modem at the time. Any suggestions/advice offered to solve this problem would be much appreciated.

- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music

Have keyframes in effect controls window coincide with main time line

Hello,
Is there any way I can have the time line in my effects control window coincide with my main time line ?
Example, I add keyframes along my main time line, but any time I wish to edit them, I need to scrub my effect controls window timeline to get to that
spot that coincides on the main time line. I'm just wondering how I can have both time lines show the same area at the same time.
So if I'm at the end of my time line, and add a keyframe, and then wish to just scrub or move my cursor to the beginning of my main time line, the
time line in the upper window ( effects control window ) does not reflect the area of the main time line I am currently at, I need to actually click the time time
line ( main time line ) in order to "refresh" the upper effect control window time line.
Thanks for any advice,
Dave.

Hi Jim,
that's what I mean, thanks for info. I guess this isn't a popular want from users, I just thought it would be neat if we could do this, it's not a big deal, but I thought
I would ask. Thanks for the informatiion - at least I know now.
Dave
JSS1138 wrote:
I think he wants the CTI of the Effects pane to match the CTI of the sequence. If one moves, the other moves as well.
In CS4 this happens by default. Has that changed for CS5?

When will Apple have the color catagories options in their calendar, to coincide with Outlook ?

When will Apple have color options for Calendar catagories available ? To coincide with Outlook ?

Just us users here. Nobody knows what Apple is going to do, or when they might or might not do it.

Inlay of city congested traffic coinciding with video co-pilots Metro 3-D Plug-In?

Any Suggestions on how best to inlay a city nightscene (traffic flow etc. aerial view) w 3-D MetroPI (also coinciding with 3-Ds if necessary). In other words the city scape is set and inlayed in an environment, having troubles on how best to approach inlaying congestive city traffic in relation with the city layout. Making it seem more relatistic. Any suggestions would be greatly appreaciated and I'm always open for advice or technical questions as well. Just jumping in to these forums for the first time. saude e paz..

For the benefit of those unfamiliar with what you're talking about, the name of the Video Copilot plugin is Element 3D. You are referring to a package of preset 3D textured city buildings for that plugin called Metropolitan.
Beyond that, I'm not really clear on your goal, like Rick. Do you want to comp Element 3D components into live footage of traffic? (Sounds very difficult).
Do you want to create 3D traffic components to add to the Element 3D scene? (Not impossible, but it will mean getting some good quality 3D car models with textures, then incorporating them into your project, either within one iteration of Element 3D, or onto a second layer who's Element objects don't intersect with the first.)
Element 3D can do some amazing and impressive stuff, but can be surprisingly limited when it comes to working with multiple 3D models in one space.

The serial number doesn't coincide.

The purchased day is March 27, 2013
serial number doesn't coincide.

What serial number?
There is no serial number for Creative Cloud apps.

GAX springboard bundle: what is it? It is something that console is telling me is loading on my phone. Usually at startup. It coincides with ubiquity container items

GAX springboard bundle: what is it? It is something that console is telling me is loading on my phone. Usually at startup. It coincides with ubiquity container items

This can be caused by clearing the cookies via [[Clear Recent History]].<br />
* Firefox/Tools > Options > Privacy > Firefox will: "Use custom settings for history" > [X] Clear history when Firefox closes > Settings
You can try to exclude the cookies to test that.<br />
You can let all cookies expire when you close Firefox to remove unwanted cookies and keep the ones with an allow exception.
* Tools > Options > Privacy > Cookies: "Keep until": "I close Firefox"
If you use [[Clear Recent History]] to clear the cookies when you close Firefox then Firefox also tries to clear the cookies from plugins like Flash and starts a plugin-container process for each plugin and possibly for each cookie (?) and that can add extra time if there are a lot of cookies to remove and also can cause an unresponsive script error to appear.

¿Como Bloquear un Iphone con el Imei?

Hola, quisiera saber como bloquear mi Iphone 4 robado por Imei para poder al menos joderle al ladron de M.... u otra forma de joderle al ladron
gracias y saludos
< Edited by Host >

Hola AngelDark, lo que necesitas
utilizar es un property node con la propiedad de disable, como mencionas.
En el diagrama de bloques,
da click derecho sobre el botón que quieres deshabilitar
En el menú selecciona
Create>>Property Node>> Disable
El nodo cámbialo a
escribir, y ya puedes decidir si tu botón va a estar habilitado, deshabilitado
o deshabilitado y en gris.
Saludos
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Id no coincide con IMEI, id no coincide con IMEI

Similar Messages

Maybe you are looking for