IDAutomationHC39S font not refreshing correctly...

Hi
We are using IDAutomationHC39S font in our webi report. The font is not appearing correctly unless we go to edit mode. Once we edit the repot and run the font is displaying correctly.
Can i know how to resove this issue so that when user opening he will be able to see the correct font...
Thanks in advance..
Muthu

You may also want to search/ask in the forum specifically for PowerPoint problems:
http://www.officeformac.com/ProductForums/PowerPoint/

Similar Messages

  • Fonts not showing correctly only when on my account page on app store

    fonts not showing correctly only when on my account page on app store

    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

  • Login Window: Screen does not refresh correctly after waking 10.7.2 iMac and MacBook.

    I have a client who brought to my attention that when we wakes his iMac and MacBook after the screen dims or sleeps at login screen, that sometimes the screen does not refresh correctly and you must use the cursor to basically "clear the screen."  I have witnessed this myself and elimiated all third party products and this still happens.  I am starting to believe that is is a bug in 10.7.2.  Has anyone witnessed this or have any suggestions on how to remedy?  Thank you.

    Thanks lynque.  It turns out I did need a keychain repair, but that didn't fix the problem.  I probably should have done this earlier, but I ended up unplugging all peripherals (2 firewire + 3 USB) then powered up without issue.
    So I shut down, plugged in one at a time, and ran into the problem again after plugging in an external hard drive (WD My Book Essential).  I repaired with disk utility, but the problem remained.
    I then rebuilt the partitions with Disk Warrior, and now everything seems to work....

  • Site Index Portlet is not refreshed correctly

    I have deployed the Site Index Portlet in Portal 10.1.4, and it seems to work nicely. However, sometimes the portlet does not refresh correctly, even though other elements on the page (e.g. banner, page path) are updated. Refreshing the page with F5 in Internet Explorer 6.0 (or clicking the same link once more) refreshes the content of the portlet, but this is unacceptable for end users.
    The same problem is not possible to reproduce in Firefox 1.5. If only all end users were using Firefox . . .
    Any ideas for how to fix this for all browsers?
    -- [email protected] [Senior Principal Consultant]
    -- http://home.c2i.net/toreingolf/contact/

    My browser caching is already set to "Every visit to the page", I'm afraid.
    I was suspecting the PPE in Portal, but if that was the reason, then the problem would occur in all browsers, right? Or do you think this could be caused by how IE handles ESI?
    Interestingly, the portlet works perfectly in Firefox (the menu is even updated immediately, before the new page loads!). And in Opera, the menu doesn't show up at all! What's going on here?

  • Non-English fonts not rendering correctly in iMovie 10.0.3?

    I use xenotype Tibetan font in iMovie and it has always rendered correctly until I updated from 10.0.2 to 10.0.3. Now many of the stacked characters do not render correctly in any of the titles. Even projects that I made three months ago with 10.0.2 when opened in the new version render the font incorrectly. Is there a reason for this change? Is there any adjustment I can do? Line-height adjustment? iMovie 10.0.3 seems to be the only Mac software currently made by apple that doesn't render the font correctly.

    Hello,
    Welcome to the discussions. There have been some transition problems reported, although maybe not so many problems as you are experiencing.
    I had the black/flash with the transition cross-dissolve in one of my movies recently. I found the suggestions in this thread to resolve that: http://discussions.apple.com/message.jspa?messageID=3842119#3842119
    Have a look and see if it can help you.

  • Google fonts not displaying correctly since updating to Firefox 31.0

    Since updating to Firefox 31.0, the vast majority of Google / web fonts are not displaying correctly, including icons that are being replaced with random characters. When I view the Google web fonts page, only a few display correctly, the rest just default to a sans-serif font.
    - I've tried running in safe mode with no add-ons enabled.
    - I've tried disabling all add-ons then re-enabling one by one.
    - I've checked the tickbox in the font settings for 'Allow pages to use their own fonts' is ticked
    Any help appreciated, it's got quite frustrating now.
    Thanks, Greg

    You can do a font test to see if you can identify corrupted font(s).
    *http://browserspy.dk/fonts-flash.php?detail=1
    You can try different default fonts and temporarily disable website fonts to test the selected default font.
    *Tools > Options > Content : Fonts & Colors > Advanced
    *[ ] "Allow pages to choose their own fonts, instead of my selections above"
    You can check for problems with preferences.
    You can check the <b>gfx.downloadable_fonts.enabled</b> pref on the <b>about:config</b> page and make sure that it is set to true (if necessary double-click the line to toggle its value).
    Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences
    Create a new profile as a test to check if your current profile is causing the problem.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
    *http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

  • Flash Animation: Font Not Displaying Correctly

    Hi all!
    I am having a problem with a Flash animation in Captivate that seems like it should be an easy fix, but I can't seem to figure it out.
    I have a very simple Flash animation that I developed in CS5. It previews in Flash perfectly, play correctly in Flash Player, but when I insert it into Captivate 4 the fonts do not display correctly. Capital letters are missing as well as other letters.
    It's not a matter of AS2 vs. AS3 as I have already tested that. It also is not a frame rate or version issue as I have confirmed they are the same rates and the same version.
    Can anyone shed any light? Anyone else had this same problem? Any guidance or suggestions would be much appreciated.
    Thanks!
    Daniel
    Screen shot:

    Hi dmendoza2,
    Did you embed your fonts into the flash animation?  Make sure all characters necessary are embedded.
    Jim Leichliter

  • EPub FXL - fonts not diplayed correctly

    Any idea why fonts are not displayed correctly in an ePub FXL if the paragraph style is set to world-ready composer? But they are embedded in the Fonts folder...

    Hi Anne-Marie,
    Thank you for your answer.
    Does it mean that Adobe world ready composer is not build for western script ?
    Adobe Help Site mentions the following:
    "Adobe World-Ready composers enable you to create content in middle-eastern languages.
    You can type in, and mix between, Arabic, Hebrew, English, French, German, Russian, and other Latin languages."
    InDesign Help | Arabic and Hebrew features | CC, CS6

  • Embedded fonts not displaying Correctly

    I have exported a 100+ page document from InDesign CS5.5 All fonts not in the system fonts are displaying as Minion Pro.
    The fonts are listed as embedded (subset) and the fonts allow for embedding.
    View the original discussion as necessary in InDesign forum, http://forums.adobe.com/message/4126902#4126902
    The incorrect display seen in Reader 8.3 and AA Pro 9.4.7
    I have toggled Use Local Fonts without change.

    I'm not doing anything to scale the movieClip.  I press CMD and enter and thats what comes out.  When I CMD + I zoom in and thats the second picture.
    Regarding font embedding, I've enabled linkage and created a new class of it in my AS3 class file.  Is there anything else I should do?
    Oh..may be worth mentioning, all the text is actually Label components. 

  • Why are TypeKit fonts not displaying correctly in Pages (iWork)?

    I have just subscribed to TypeKit and am experiencing highly peculiar behavior from the two fonts I’m using in Pages (iWork): Basically, fonts in my document don’t respond appropriately to requested changes in style. For example, if I increase the point size by one point using the the formatting commands built into Pages, the font drops a point size. I’ve had the same experience using the kerning command, where the kerning decreases when I have set it to increase. (So far, the only fonts I’ve been using have been Futura PT and Proxima Nova.)
    Look at the example in the screenshot: “FEATURED EXPERT” on the top line shows in Pages as being 24pt Futura PT Book. However, “SOLO,” a few lines down, which is definitely displaying as smaller, shows as 25pt Futura PT
    In a potentially related issue, when I reopened this same document today, text boxes were suddenly too small for the text (again in Futura PT and Proxima Nova). It was as though Pages was suddenly reading those two fonts differently.
    I have had no issues with other (non-TypeKit) fonts in the same document.
    Anyone else experiencing anything similar? Any suggested fixes? I'm reluctant to unsync/resync the two affected fonts (the only ones I have sync'd to date) because I don't want to wreck the document!

    Thanks, Christopher. After I posted my original question, I did come to realize that it was Helvetica not Future PT showing. Here’s what happened, and here’s why I still need some guidance…
    The document dropped Future PT because when my wifi signal dropped, the Creative Cloud app displayed this error symbol (see graphic) in my menu bar.
    At that point, my computer could no longer access my TypeKit fonts and the document reverted to the system's Helvetica default.
    This was not an isolated incident.
    If I turn wifi off manually, there is no issue and CC continues to operate in the background as it should, with TypeKit fonts still available.
    However, if the wifi drops out on its own, I get the above error symbol and I then lose access to my TypeKit fonts. Very rarely, the CC app will self-correct when the signal is restored. More often than not, I must quit the CC app and relaunch it in order to get things back to normal.
    This doesn’t strike me as normal behavior Have you ever encountered anything like it? Do you know of  a fix that will allow the CC app to self-correct when the wifi signal is restored?
    Any assistance will be appreciated! 
    Thanks!
    P.S. TypeKit troubleshooting doesn’t address this particular issue.

  • Korean font not displaying correctly. Internationalization Issue

    Hello,
    I'm not sure if this is an internationalization issue but I have an Adobe Air project that isn't displaying Korean correctly. I basically have created a MovieClip in Flash CC with a textfield child. When this movieclip is instanced in Air, it's text is dynamically assigned from a web service. The font used works fine except for Korean so we had to switch fonts when using Korean text. This is where things get interesting. If I try to programmatically change the textformat.font to use the Korean font, the font switches but just the Korean characters aren't supported. However if I set the textfield's font to the Korean one in Flash CC, everything displays fine. The font is embedding the same in both instances and is including 'All' characters.
    I'm not sure if this is a bug or if I have to add a flag for Korean support somewheres in the build settings. I've created work around for now which has two textfields, one with the font we need and one for korean only. As the data from the webservice is parsed it detects for Korean characters in the string and if it finds them it makes sure the Korean textfield is used. Kind of a dirty way to do it but it doesn't seem to like changing the font family around.
    Anyone else notice this?

    It's the latest AIR 15 SDK with the Flex framework.swc and framework_fb.swf added for binding support
    I overwrote the code since it was only a couple lines but here's what I was doing for the way that broke
    var tf : TextFormate = this._sknPageShield.pageName.getTextFormat();
    tf.font = "Arial Unicode MS";
    this._sknPageShield.pageName.setTextFormat(tf);
    The font changes because english characters showed up, however even though I click embed all fonts, korean characters do not display. I have to set the font on the textfield using the Flash CC tools and it works fine.

  • Font Not Appearing Correctly

    I've had a font collection Mrs. Eaves for years. It works fine in every application. It is suddenly, for a reason I cannot fathom, not working with pages. Some of the fonts in the collection display the wrong characters. The font files are on the fonts folders, every other application I've tried displays them fine. I've tried trashing and reinstalling the fonts. I've cleaned caches. I've repaired permissions. What else can I do? This font is very important for my work.

    I'm curious that this is not automatically possible since, even under the old Type1 PS font tables glyphs were named as well as just given a number.
    There is a first principle in information technology: You can automatically audit whether or not a data structure is present, but you cannot automatically audit whether its meaning is correct or incorrect.
    (Among other things, this iprinciple is stated in the patent for heuristics to reclaim character information which Adobe has licenced from PDFLib for PDF/A.)
    The simple set theory at the basis of this is that Interpress and PostScript were both designed as glyph encoding models and not as character encoding models.
    Harrington and Buckley in their 1988 to Interpress explain that the design allows several character sets with incompatible constitutencies to be imaged simultaneously.
    For the RIP to process and draw glyphs it has to have an identification scheme of sorts, and that scheme could not be a character encoding prior to ISO-IEC 10646-1:1993.
    PostScript glyph identifiers were initially regulated by Adobe and Linotype, but whether or not you could get from the glyph identifiers back to the character information was of no importance because the character information was not unified and thus could not in principle serve as support for an internationalised search architecture.
    In 1989 when Warnock announced in the New York Times that the aim was to distribute a document world wide in wholly digital form, the commercial and mathematical challenge was to turn Adobe glyph names into a surrogate character superset. This way incompatible character constitutencies could index into the surrogate superset and character information recovered.
    In 1991 when Warnock announed in the New York Times that search support was to arrive in Carousel, the Adobe Type 1 Specification and the Apple TrueType 1 Specification had already been published in the summer of 1991, and the Apple and Microsoft had already made it clear that the OS market wanted a character encoding model instead of a glyph encoding model.
    From there it went to bits, Adobe pressing for more and more type designers to move to the Type 1 format in order to try as best as possible to maintain control of the glyph identifiers, Apple and Microsoft pressing in the opposite direction where in the intelligent font model character codes and public and font-independent while glyph codes are private and font-dependent.
    By April 1992 when FOGRA Forschungsgesellschaft Druck in München held a conference on the direction of development in professional prepress, Adobe in a telecommunications appearance claimed that 16,000 products were already on the market in the Type 1 font program dictionary format and that Carousel was imminent in 1993 (per online article by Chief Editor Kurt Wolf of Deutsche Drucker).
    The problem with this is that the PostScript interpreter has no information (none at all) about the source character set, it only has information about the glyph identifiers in the Type 1 font program dictionary. It doesn't need the characters in any case, because they were not consistent identifiers until Adobe adopted UTF16 short character identifiers as glyph identifiers in 1998.
    In my opinion, the technical writing for all this was terrible from the beginning, those who tried from the outside were not given half a chance, and what came out from inside was not but waffling at best (and at worst it was deliberate disinformation).
    /hh

  • Fonts not displaying correctly in my .ipa file

    Hello Forum People!
    Been searching around for the following answer but nothing seems to be jumping out.
    I'm just in the process of testing my first Developer App .ipa file and the fonts don't seem to be loading correctly. The article pages and standard pages and not HTML content. I thought the fonts are embedded similar to a PDF, is this not correct?
    When was I doing my testing via the adobe viewer app the fonts seem fine. Now that I've created all my certificates and gone through the whole process the fonts don't seem to display when viewing the .ipa file using the DPS App builder. The font in question is Bryant Pro.
    Anyone got any ideas?

    Can you explain a little more about @font-face and how do I include the font files with the folio?
    When inside the folio, I went to 'Create App...' inside the folio builder side menu.
    At the minute I just use suitcase to store my fonts and open the fonts i need when working on a print or dps job.
    Can you point me in the direction of a tutorial which might talk about this more detail? What page does it dicuss fonts inside the 'Step_by_step_guide_to_dps_se.pdf'

  • Fonts not displaying correctly in Muse, working fine on upload. HELP! Working on Muse CC 2014, Mac OSX 10.9.4

    Hello!
    In Muse, my fonts are displaying incorrectly, when uploaded the fonts are correct. I am guessing this is a system issue. First time I have had this problem since making the jump to CC 2014 and it is making designing painful . I've updated everything, dumped and reinstalled the web fonts, restarted, cleared PRAM and scratched my head a bunch. I also tried to find a font cache to dump but could not locate it...any thoughts would be greatly appreciated. Thanks Musers! - Andrew

    Re: Source Sans Pro not displaying in 'Design' mode
    This did the trick for me. Thanks D Dog!

  • Symbol font not displayed correctly in WebHelp output

    I have TCS 2. I have a character format that uses the Symbol font. It displays correctly in FM and in the RH Design Editor. But in the WebHelp output, the Symbol font displays as Arial. What did I do wrong?

    Hi,
    What browser are you using? Most probably, your browser does not support the symbol font out of the box and therefore defaults back to Arial. My guess is that it will work on IE, but not on other browsers. This is because Symbol isn't a default web font.
    To overcome this, you must use the @font-face rule in your css and provide the font file as a baggage file in your project. For more info on @font-face, see: http://www.font-face.com/.
    Greet,
    Willam

Maybe you are looking for