Ideas to manage number of hours of appointments in a week?

This is a strange request, but I'm looking for something I can use with Apple's Calendar to keep up for me how many appointments or how many hours of appointments I schedule for myself in a week at work, so that I know when I'm reaching a threshold that I have set for them.  Do any of you know of any add-on software packages to Calendar, or any ideas, to easily determine and manage this?

Hi Joanne
25,000 reports is high. I've seen a few places with more but not by many so you are right up there at the top of a small list. I'd hazard a guess to say that some of them must be redundant.
The first thing I would advise would be to get your DBA to reorg the table. This way it will have the optimum settings and the indexes will not be lop sided. Also, please make sure your DBA is gathering statistics for this table otherwise if it has been a long time the optimizer will have trouble figuring out how to get data out of it.
With regards to redundant reports that will be a little more difficult to resolve. You probably need to go through a clean up exercise and ask your users to get rid of unwanted reports. You should also check to see if any reports are owned by ex-employees. These can probably go. However, I would advise taking a backup first - just in case!
Best wishes
Michael

Similar Messages

  • Calculate number of hours per week and limit

    Hi,
    I have a list in SharePoint that manages over time.
    I need to set a limit for a user for 15 weekly hours that he can ask for OT.
    Is there a way to limit once the user passes the limit above? 
    Thanks a lot in advance

    Sum the total number of hours person worked on.
    Create a calculated column and
    http://msdn.microsoft.com/en-us/library/office/bb862071%28v=office.14%29.aspx
    Calculate the difference between two times
    To present the result in the standard time format (hours:minutes:seconds), use the subtraction operator (-) and the TEXT function. For this method to work, hours must not exceed 24, and minutes and seconds must not
    exceed 60.
    Column1
    Column2
    Formula
    Description (possible result)
    06/09/2007 10:35 AM
    06/09/2007 3:30 PM
    =TEXT([Column2]-[Column1],"h")
    Hours between two times (4)
    06/09/2007 10:35 AM
    06/09/2007 3:30 PM
    =TEXT([Column2]-[Column1],"h:mm")
    Hours and minutes between two times (4:55)
    06/09/2007 10:35 AM
    06/09/2007 3:30 PM
    =TEXT([Column2]-[Column1],"h:mm:ss")
    Hours, minutes, and seconds between two times (4:55:00) 
    If this helped you resolve your issue, please mark it Answered

  • FM to find the difference in the number of hours

    hi all,
    is there any function module to find out the difference between two time stamps on two different dates. say if an activity starts on 09/05/2007 at 11:23:24 and ends on 09/08/2008 at 14:24:26. it needs to find the number of hours between the two. for this case it should be:
    75:01:02 hours:mins:secs.
    or a FM which works in a way similar to the above functionality.

    Hi,
    Use FM SD_CALC_DURATION_FROM_DATETIME
    but this will not give the seconds difference
    Regards
    Shiva

  • Hi im having difficulty with my iphone 4s its been on charge for a number of hours and continues to flash the apple logo but will not turn on i have tried to reset but it did not help

    hi i am having difficulty with my iphone 4s it has been on charge for a number of hours but is just flashing the apple logo continuously i have tried to reset but nothing seems to work can anyone help me please

    What is a hard reset?  There is nothing in any of Apple's documentation that refers to a hard reset.
    There's a reset, a restart, and a restore.
    Please explain EXACTLY what you did.

  • How to configure JSpinner to accept number of hours (with mins and secs)

    I'm having a problem trying to figure out a simple way to enable a JSpinner to do allow the input in this format:
    n hours : n minutes : n seconds
    ex: 100 : 0 : 0, 1:59:59, 25:30:00
    Where n hours could be from 0-n (not restricted by 24 hours) and minutes and seconds are, of course, < 60. That is, I can enter number of hours, not a date, or a specific time in a day.
    I'm thinking the only way to do this is with a custom spinner model and custom editor? Or is there a simple way I can make the date model in spinner to allow me to do this?
    Thanks

    import java.awt.*;
    import javax.swing.*;
    import java.util.*;
    public class Test2 extends JFrame {
      public Test2() {
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        Container content = getContentPane();
        content.setLayout(new FlowLayout());
        content.add(new MySpinner());
        setSize(300, 300);
        setVisible(true);
      public static void main(String args[]) { new Test2(); }
    class MySpinner extends JSpinner {
      public MySpinner() {
        setModel(new SpinnerDateModel(
          new GregorianCalendar(2004,0,1,0,0,0).getTime(),
          null, null, Calendar.DAY_OF_YEAR));
        setEditor(new DateEditor(this,"HH:mm:ss"));
    }???

  • I want to convert number to hours in oracle 10 like this.

    Dear All
    Some can help me
    I want to convert below MS-SQL query in oracle 10g. please help me.
    for eg:
    Select numasdate,
    Cast(numasdate / 60 as Varchar) + ' hours ' +
    Cast(numasdate % 60 as Varchar) + ' minutes'
    as [TotalHoursAndMinutes]
    From
    #SampleTable
    Output:
    9436 157 hours 16 minutes
    537 8 hours 57 minutes
    9323 155 hours 23 minutes
    12525 208 hours 45 minutes
    Edited by: Parwez on Jan 1, 2013 5:33 AM

    I want to convert number to hours in oracle 10g like this.
    537 8 hours 57 minutes
    9436 157 hours 16 minutes
    12525 208 hours 45 minutesTry this...
    Ranit>> with xx as(
      2      SELECT 537 num from dual UNION ALL
      3       SELECT 9436 num from dual UNION ALL
      4       SELECT 12525 num from dual
      5  )
      6  select
      7       num,
      8       FLOOR(num/60)||' hrs' as "hrs",
      9       MOD(num,60)||' minutes' as "minutes",
    10       FLOOR(num/60)||' hrs  '||MOD(num,60)||' minutes' as "Hours.Mins"
    11  from xx;
           NUM hrs                                          minutes                                          Hours.Mins                                                                                                        
           537 8 hrs                                        57 minutes                                       8 hrs  57 minutes                                                                                                 
          9436 157 hrs                                      16 minutes                                       157 hrs  16 minutes                                                                                               
         12525 208 hrs                                      45 minutes                                       208 hrs  45 minutes                                                                                                Edited by: ranit B on Jan 1, 2013 6:51 PM
    --- Hey John... I just did it and saw your hint now !!!

  • Confirmation error - Number of hours recorded  exceeds target hours 0,00

    Hello Friends,
    I am getting one error in service confirmation . Service confirmation did not go through R/3 properly.
    Also how system checks recorded hours against target hours ?
    We can find recorded hours in Actual duration column but where we can see targeted hours?
    Error message is described below , can you pl let me know what should I do to fix it.
    An error has occured in the system KRP810 while copying the document
    Number of hours recorded 57,00 exceeds target hours 0,00 (Notification W LR 206)
    Amount field has zero value in CO Document (Notification E 000)
    Updating could not be completed (Notification E S& 150)
    Pl advice.
    Nitin

    need to replace confirmation

  • How to calculate number of hour for projects

    Hello Experts
    I got a table which has all the information about employee. I need to find the number of hours an employee worked on a project. Let say employee ‘ABC’ worked on 2 different projects. I need to find out how many hours he worked on each project. In my table I’ve
    employee_id, employee_name, proj_startdate, proj_enddate, finishtime fields.
    Can please somebody show me how I can find out the hours?
    Thanks a lot in advance

    it's useless...
    but you need to add a field 'project_id', if an employee works for multiple projects..
    furthermore, you can also add a field named like 'working_hours' into your table...
    your table new structure, let's say the table name is employee
    employee_id, employee_name, project_id, proj_start_date, proj_end_date, working_hours
    then you can use the below codes to update it and make your data be more clear...
    UPDATE employee a
    SET a.working_hours = (SELECT (proj_end_date-proj_start_date)*24 FROM employee b
    WHERE a.employee_id = b.employee_id
    AND a.project_id = b.project_id);
    BUT, you have to add a constraint on your table to make the fields(employee_id, project_id) be unique

  • How to calculate Number of Hours between 2 dates

    Hi,
    I have a Column in a table of datatype DATE i.e. Update_Date. Now How do I calculate number of hours passed starting from this date entered in the Update_Date column to SYSDATE. e.g. if the date in column is 2-FEB-2009 and the sysdate is 2/2/2009 2:07:40 AM it should give me 24. How can I get this number of hours.
    Update_Date - Sysdate = Number of Hours.
    Thanks

    When you subtract two dates in Oracle, you get a difference in terms of days. Just multiply that by 24 to get hours.
    SELECT (sysdate - update_date) days,
           (sysdate - update_date) * 24 hours
      FROM your_tableThat said, it is not obvious how your example works. You state
    if the date in column is 2-FEB-2009 and the sysdate is 2/2/2009 2:07:40 AM it should give me 24Since both dates are on February 2, 2009, the only difference is in the time component. If we assume that the time component of the UPDATE_DATE value is midnight since it is not specified, there is a little more than 2 hours of difference between the two dates. How is it that you determine there are 24 hours of difference?
    Justin
    Edited by: Justin Cave on Feb 2, 2009 10:39 AM

  • Count number of hours between dates excluding holidays/weekends

    Hello all
    I havent worked with dates extensively and was recently asked to create a report where Im looking for the number of hours between two dates only counting business days.
    So for example I have data as follows
    Created 2011-03-30 15:00:00
    Processed 2011-03-30 15:03:46
    Fulfilled 2011-04-01 17:25:02
    Mailed     2011-04-01 17:45:00
    For a total of looking from the CREATED and MAILED dates
    50 hours 45 minutes
    Im also trying to exclude weekends and holidays, i was reading around and was actually able to also find a table of dates where I have the main date, HOLIDAY_IND column and WEEKDAY_IND column
    So the calender table i have looks similar to
    CALENDER_DATE HOLIDAY_IND WEEKDAY_IND
    2011-03-31 Y Y
    2011-04-01 N Y
    2011-04-02 N N
    Im really quite stumped as to where to begin
    I was thinking of trying to write it with PL/SQL but i dont have the proper user access to create procedures/functions, so looks like straight up SQL
    Any help appreciated!

    Hi,
    Depeneding on your data and your requirements, you can do something like this:
    SELECT     created_DATE,
    ,     mailed_date
    ,     24 * ( (mailed_date - created_date)
                SELECT  COUNT (*)
                FROM        table_o_dates
                WHERE    main_date > created_date
                AND        main_date < TRUNC (mailed_date)
                AND        (   holiday_ind = 'Y'
                         OR  weekday_ind = 'N'
               )               AS hours_between       
    FROM     table_x
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using.
    What do you want to do if created_date or mailed_date is not a work day? Include examples in you data and results.

  • Assignment between network , activity , person , planned number of hours

    Hi
    In CJ20N , we are doing person assignment against activity
    Against activity , in internal tab , we are entering the planned no of hours in the field Work
    Similarly , against each person , we enter the splitted time
    I need to know , in which Table , we can find the relationship between network , activity , person , planned number of hours (at that person level)
    rgds
    sandeep

    Hi Sandeep ,
    AFVC, table for activity
    KBED, table for main capacity.
    KBEZ, for Split
    KPER, person assignment of each period.
    There is a correction report ZKBED_DEL of note 542941, You get more details of the relationships of the tables above, if you view (or debug) the codes.
    Kind regards,
    Zhenbo

  • Delete rows older than given number of hours

    Hi,
    I have a table student which contains the following columns
    ID Number(5)
    Name varchar2(20)
    Strt_Time timestamp(6)
    Strt_time is the timestamp when the particular row is inserted in the table.
    I need a query to delete all the rows inserted before given particular number of hours.
    For Example. If i pass the input paramter as 2 all the rows inserted before 2 hours from now should get deleted.

    Hi,
    Here's one way:
    DELETE  student
    WHERE     strt_time < SYSTIMESTAMP - INTERVAL '2' HOUR
    ;Or, if you're getting a NUMBER parameter like :num_hours, then
    DELETE  student
    WHERE     strt_time < SYSTIMESTAMP - NUMTODSINTERVAL (:num_hours, 'HOUR')
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and the results you want from that data.
    In the case of a DML operation (such as DELETE) the sample data should show what the tables are like before the DML, and the results will be the contents of the changed table after the DML.
    Explain, using specific examples, how you get those results from that data.
    If your results depend on the current time and/or parammeters, then give a couple of different examples using the same sample data. For example "If I run this at 11:00 on January 3, 2013, with :num_hours=12, then the table should be left with ... but if I run it at 13:00 on January 3, 2013, with :num_hours= 24, then I should get ..."
    Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
    See the forum FAQ {message:id=9360002}

  • "number" to "hours" format

    Hello experts,
    i wonder is there any way to make a calculation for converting number (ex. 6,68) to HH:MI:SS format (6":"0,68*60":"00). I gave up with TRUNC or MOD.
    Thanks

    Hi,
    If tnum is the number of hours, so 1.5 is 1hour 30mins then you can use:
    TO_CHAR(TRUNC(ROUND(TO_NUMBER(tnum) * 3600)/3600), 'fmTM9')
    ||':'||TO_CHAR(ABS(MOD(TRUNC(ROUND(TO_NUMBER(tnum) * 3600)/60),60)),'fm00')
    ||':'||TO_CHAR(ABS(MOD(ROUND(TO_NUMBER(tnum) * 3600),60)),'fm00') Rod West

  • Subtracting two timestamps and showing the number of hours between them.

    Hello Folks,
    What I have is two tables, each of them has a timestamp column. I want to do a select with a join that will show a column with the number of hours between the two times.
    (I have added the columns as timestamp(0) since I have no need for the decimals)
    Here's what I have:
    table one name: conc_test
    table one info:
    P_DATE-------JOB_NO-----MIX---POUR_NO----AMB_T---CONC_T--SLUMP---AIR---DENSITY---CYL_CAST_TIME
    09-MAR-10---9-12-796-----80----100309A------2.5--------16----------135------2.5----2501-------09-MAR-10 10.00.00 AM
    table two name: rls_break
    table two info:
    JOB_NO----POUR_NO-----CYL_ID----SPEC_STR---STR----MIX---BREAK_D_T
    9-12-796---100309A----100309A1------20-----------27-----80----10-MAR-10 07.15.00 AM
    (I put the --- between the columns so it would be more legible for forum reading, fyi)
    This is what I was trying to do:
    select
    rls_break.cyl_id "Cylinder ID",
    rls_break.mix "Mix",
    trunc(rls_break.break_d_t-conc_test.cyl_cast_time) "Age",
    rls_break.spec_str "Specified Strength",
    rls_break.str "Specimen Strength"
    from rls_break inner join conc_test on rls_break.pour_no = conc_test.pour_no
    where pour_no = '100309A';
    I want the "Age" column to show the total number of hours between the cast time (column cyl_cast_time from conc_test) and the break time (column break_d_t from rls_break)
    Thank's for any and all help.

    (I put the --- between the columns so it would be more legible for forum reading, fyi)Please put the tag before and after your examples.
    See: http://forums.oracle.com/forums/help.jspa for more information reagarding tags. (scroll a bit down)
    I want the "Age" column to show the total number of hours between the cast time (column cyl_cast_time from conc_test) and the break time (column
    break_d_t from rls_break)
    Do a search on 'NUMTODSINTERVAL' or 'time difference' on this forum, you'll find many related examples.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Get number of hours between two dates and two hours using factory calendar

    Hello all,
    I have the following requirement: I need to calculate the number of hours between two dates and two hours (start date- finish date and start hour-finish hour) or timestamps using a factory calendar. I must program it on CRM environment.
    Does anybody know a function module that makes it?
    Thanks in advance.
    Carmen

    Please check function module DURATION_DETERMINE.
    - April King

Maybe you are looking for