Identical ID in two or more dimensions encountered during transport issue.
Hi there,
we encountered an issue WHEN having members IDENTICAL ID in two or more dimensions. Example:
ACCOUNT Dim; member 1000 = Cash
MATERIAL Dim: member 1000 = Plastic Cup
When in a report, we are showing only ACCOUNT members in the rows (hardcoded). for the 1000 member we have to specifiy ACCOUNT:1000 for the correct account and description to appear. - When not specifiying the dimensionname before the account then 'for whatever reason' the MATERIAL member will be display and used in report.
Here is the problem! - When we transport the report, whith hardcoded ACCOUNT:1000 celll from SB to our DEV environment, then the report does NOT work appropriatly anymore! ... this is the case as the DEV environment does NOT have a member 1000 in the MATERIAL dimension. Hence the differenetiation or hardcoding is not needed. However in addition to not needed the transported Report is NOT working anymore due to that exact same. - One once we go in DEV to remove the 'ACCOUNT:' before 1000, then the correct discription and values are refreshed, before (ACCOUNT:1000) it does not refresh with values.
How come? How to handle this inconsistancy? --- When hardcoding ACCOUNT:1000 in dimension set where numerous dimension have the 1000 member, the report works. - However same report, in an environment without identical members in numerous dimension, the report does NOT work.
Any suggestions?
Hi,
Interesting. This only happens when you are not using an expansion. This looks like a bug, as the members "ACCOUNT:1000" and "1000" should be treated exactly the same in your scenario. You should probably open a message with SAP.
One workaround you can use to guarantee that the report works in all systems is to use an =EVMBR("APPNAME","ACCOUNT:1000") function in your row/column-key range instead of hardcoding "ACCOUNT:1000" directly into the cell. You will have to format the cell where you do this as "General" instead of "Text" before Excel will evaluate the formula.
Hopefully that works for you as well,
Ethan
Similar Messages
-
Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller
Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....
To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian -
Error in Muse : Object UID:U6875 has two (or more) owners: U3633 and U3165
I encoured this error when I wanted to save my work on a Muse site:
"Object UID:U6875 has two (or more) owners: U3633 and U3165"
I just want to tell that since I have upgraded Muse in 2014.3, I had lost all my add ons, and followed the instructions about uninstall and re-install them, but nothing happened, and I have re-install them manually.
I'am working on a very important project and this failure is a very great problem for me.
Thank' for help !When you launch Muse, is it prompting you as to whether or not you want to "recover unsaved changes?"
Have you made a large number of changes to your file since the first time you encountered this error? If not, say "No" to recovery. You'll lose all the changes you've made since the last time the file saved without any error, but from there you'll be back up and running. (The problem that triggers this error is in the unsaved changes in the Muse temp files. The underlying cause of this error has been fixed in 2014.3.1, but if your attempting to recover changes made using 2014.3.0 you'll continue to encounter this error.)
If you've made a large number of changes, you can send us your .muse file and the "Recovery" folder found in:
Mac: "~/Library/Preferences/com.adobe.AdobeMuseCC.2014.3/Local Store" (copy and paste into the Go > Go To Folder dialog in the Finder)
Windows: "%appdata%/com.adobe.AdobeMuseCC.2014.3/Local Store" (copy and paste into a file explorer window)
In both cases above, include everything between the quotes (including the tilde ~ on the Mac) in the copy/paste, but not the quotes themselves.
We can attempt to fold your unsaved changes into your .muse file, repair the damage that's part of the Recovery data, and return the file to you. Depending on the scope of the changes and the damage, it may take a few days.
You could send the files to [email protected] along with a link to this thread. If the files are larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (If you use a service, please include your return e-mail address in the body of the message, since not all services include it in the sharing invite they send.) -
Load balancing two or more Web Provider instaces
Is it possible to balance the load between
two or more Web Provider instaces?
I think that HTTPSession exists between
Parallel Page Engine (PPE) and
the Web Provider instance.
Is it correct?
If so, how can I achive load balancing of
Web Providers?Ok, we tested successfully in our environment and here are the details:
Scenario:
1) One Management Server and two Publishing Servers
2) Publishing Servers are load balanced in F5 (VIP Address)
3) Publishing Servers use Custom App pool identity (Application Pools-->AppVPublishing)
4) App-V 5 Clients use the VIP address in the registry for Publishing Server name and URL
Steps on SQL Side:
1) Obtain the Object SID of the Custom App Pool Identity (ADSI Edit)
2) Login to SQL Server as Admin and launch SQL Mgmt Studio
3) Select App-V 5 DB and expand tables and select 'dbo.PublishingServers'
4) Right click the above table-->edit top 200 Rows'
5) Replace 'Sid' with the one obtained in Step 1
6) File-->Save All
App-V Mgmt Console and Clients
1) Add new packages
2) From any App-V client-->Sync Publishing Server
3) From any browser-->http://<VIP address>:889
4) Make sure all changes on Mgmt Console are reflecting on the Clients
Thanks to Greg who put us in right direction even though scenario is bit different. Also thanks to Chuck Timon from MS App-V team for testing with me.
Now going back to see if we can test this using DSR method on F5 which we tested successfully with App-V 4.6 SP1 earlier. If anyone tested DSR (F5) in App-V 5, please let me know.
Thanks
Raj Yarlagadda
I have - 2 publishing servers listed under this "edit top 200 rows" you want to modify the SID of the publishing
servers computer accounts to the Custom App Pool Identity's SID ? you can't have the same SID
listed for both? -
Flatten two (or more) transparent PNG images (32 bit)
Hello
How to flatten two (or more) transparent (32 bit) PNG images.
The result must be also a transparent (32 bit) PNG image.
Solved!
Go to Solution.Since you aren't really doing any alpha blending and just a simple mask I would do the following.
The Picture to Pixmap VI, as you discovered, wipes out the mask, but you can restore it by simply OR-ing the two image masks. I assume the two pictures have the same dimensions for simplicity, there are tricks if this isn't the case.
I have also added a Version 8 (I hope) VI since that seems to be what you are using.
Attachments:
FlattenPNG.png 176 KB
FlattenPNGv8.vi 161 KB -
Billing Comparison on quantities when two or more time slice in bill doc.
I our project for commercial customer consumption history of past six years is normalized to create a monthly consumption base line (calendar months) this base line is maintained as installation fact and while billing execution this is used to calculate billing base line
E.g
Jan consumption base line u2013 100000 KWH
Feb Consumption base line u2013 90000 KWH
Billing period is 15 Jan u2013 15 Feb
Billing base line is calculated by prorating Jan and Feb consumption base line
((100000/31) X 17 ) + (( 90000/28) X 15) = 103053
Periodic consumption is compared with billing base line and if
A. Consumption is more than billing base line
Excess consumption is billed to produce debit $ amount in bill doc
E.g Billing base line 103053, Periodic consumption 110000
Excess consumption = 110000 u2013 103053 = 6947 KWH
6947 X price = Debit $ amount
B. Consumption is less than billing base line
Difference between billing base line and consumption is billed to produce credit $ amount in bill doc
E.g Billing base line 103053, Periodic consumption 90000
Difference = 103053 - 90000 = 13053 KWH
13053 X ( -Price) = Credit $ amount
Comparison between Billing base line and Consumption is done using standard variant IF01
The problem occurs when bill document has two or more time slice due to price change or change in facts like factor at rate category facts. If for one time slice consumption is more than billing base line and for other time slice consumption is less than billing base line.
Variant IF01 does not take into account time slice but it compares quantities considering whole billing period.
E.G Billing period is 25 Jan u2013 25 Feb
Price changes on 20 Feb
Billing base line 25 Jan to 19 Feb u2013 50000
20 Feb to 25 Feb u2013 20000
Billing base line for complete billing period 50000 + 20000 = 70000
Consumption (prorated by SAP) 25 Jan to 19 Feb u2013 56000
20 Feb to 25 Feb u2013 18000
Total consumption for billing period 56000 + 18000 = 74000
Consumption is more than billing base line for 25 Jan to 19 Feb time period and consumption is less than billing base line for 20 Feb to 25 Feb time period but since for complete billing period consumption (74000)is more than billing base line (70000) and this comparison is done by IF01. Control in schema flows to rate which calculate the Debit $ amount for both the time slice which results incorrect calculation of bill amount
Has anybody encountered similar scenario before. Is there a way out so that individual comparison is carried out for each time slice to pass control to correct rate in schema.
Thanks
AmitHi,
You can use variant quanti02 to determine the difference between the periodic consumption and base consuption.
first, you calculate the positive difference only ( periodic consumption - base period) by selecting variant control 2 - Negative differences are not updated. You store this into a new QUANT operand called QPLUSDIFF
then you do the same quanti02 to determine the negative difference, but first you detemine it as positive difference between base consumption and periodic consumption) and multiply the result with factor -1 with quanti09 and store it into a new QUANT operand called QNEGDIFF
Then you have your negative and positive differences and you can bill them with the corresponding prices in subsequent steps.
Hope this helps,
Daniel Toba
http://www.sap-isu.net -
Did you know how to link the text in two or more text boxes?
Did anyone know how to link the text in two or more text boxes in Pages 5.0? Thanks for your answer.
Qualcuno sa come collegare il testo in due o più caselle di testo nella versione 5.0 di Pages. Grazie per le vostre risposte.It's just one of the many, many features that have been eliminated or changed. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done. -
Can I use two or more Apple ID accounts on the new Apple TV? Everyone in my family has a seperate account.
Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))
-
Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks
mannyace wrote:
Thanks for the response.
So I basically won't run into any trouble? I
There should be no issues. Its designed to work like that. You don't change Apple IDs just because you get a new device.
mannyace wrote:
Thanks for the response.
Is there any chance that the phones can fall out of sync?
Unlikely. But nothing is impossible. Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
mannyace wrote:
Thanks for the response.
If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
Images, can be transferred either through Photo Stream
My Photo Stream FAQ - Apple Support
Or any Cloud service you want such as Dropbox, or One Drive.
mannyace wrote:
Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important. -
How can I make a server differ between two or more clients?
How can I make a server differ between two or more clients?
The clients can connect and talk to the server fine, but how can I make the server talk to one, two or all clients? i.e. what would be a good way to implement this?
Currently, the server listens for connections like this:
while (listening) {
try {
new ServerThread(this, serverSocket.accept()).start();
I guess one way would be to add the ServerThreads to a Hashtable with the client ID as key, and then get the ServerThread with the proper client ID, but this seems unnecessary complicated. Any ideas?Complicated was perhaps the wrong word, I should have
written something like it doesn't "feel" right. Or is
this a common and good way to solve communication
between a server and multiple clients?Thats pretty much how I do it. I normally use an array or ArrayList of Sockets instead of HashTable, with [0] being the first player etc.... Then you can communicate with exactly who you want. If you want to send bytes to all of them, just send the same thing to each socket individually (or is there a better way to do this?). -
How to show two or more PDF in one PDF-Reader / Concatenate PDF-Files
Hi,
I want to show two or more PDF files in one PDF reader window or to concatenate two or mor PDF files to one file.
We use WD4A and ADS.
Have someone an idea to solve this without an external program?
Thx in advance
JürgenWe have done this successfully a few times using WDA - it wasn't easy - it took us 2 full weeks to figure it out, so i need to get full points for this one!
It's going to much easier to do this if you start a brand new WDA. If not, you'll have to re-do all your Context Node navigations within your methods.
The first thing you need to do is to define your Context properly:
You need a top level Node defined as 1:1 cardinality (as with all PDF development)
Next, you need another Container Node 1:n cardinality (this holds the collection of content nodes)
Finally, you have your PDF Content Node 1:n cardinality - This holds each instance of your PDF form
In our scenario, we are passed in a list of Project Numbers. We need to generate a PDF sheet for each project in the same PDF session.
pseudo code - i'm leaving out some of the unnessary details
Loop through the project number table.
ADD 1 TO v_cnt.
* navigate from <TOP> to <PDF_CONTAINER> via lead selection
lo_nd_pdf_container = lo_nd_top->get_child_node( name = wd_this->wdctx_pdf_container ).
* This is the Important Part - we check to see if there is an element where index = v_cnt
* If not, we create one where we can store the new set of data
* get element via lead selection
lo_el_pdf_container = lo_nd_pdf_container->get_element( index = v_cnt ).
IF lo_el_pdf_container IS INITIAL.
lo_el_pdf_container = lo_nd_pdf_container->create_element( ).
lo_nd_pdf_container->bind_element( new_item = lo_el_pdf_container
set_initial_elements = ' ' ).
ENDIF.
lo_nd_ideasheet_data = lo_el_pdf_container->get_child_node( 'IDEASHEET_DATA' ).
lo_el_ideasheet_data = lo_nd_ideasheet_data->get_element( index = 1 ).
* fill all the data then bind the structure
Select * from XXX into lt_XXX
where project_number = lt_project-project_number.
* Move Data to appropriate fields/tables
* Bind the info back to the element
lo_el_ideasheet_data->set_static_attributes( static_attributes =
ls_ideasheet_data ).
Endloop. -
How do you combine two or more movie clips into one movie clip in iMovie '09
how do you combine two or more movie clips into one movie clip in iMovie '09
First create an iMovie project. Then drag the clips (or portions of clips) that you need into the project.
When finished, use the SHARE menu to share the project. -
Is there a way to work with two or more app at the same time on iPhone or iPad
Is there a way to work with two or more app at the same time on iPhone or iPad?
What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.
-
How can I use TopLink for querys that have two and more tables?
I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
Thank you for see and answer this question.You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
Zev.
check out oracle.toplink.expressions.Expression in the 10.1.3 API
Maybe you are looking for
-
How to maintain serial no for sales order created by BAPI
Hi all, We are using BAPI for creating sales order "BAP_SALESORDERDAT2" but we are not able to assign Serial number while using this BAPI. Is there any function modul, BAPI, or workarround available to solve this problem. Or how to maintain Serial nu
-
Hi guys! I just got some new components for my computer but it seems like I can't use the power or reset buttons anymore (I press power and reset on my case and nothing happens). I am sure I connected them correctly but when I press them nothing happ
-
Does anyone know whether there's a terminal command to make all applications remember/use the last directory/path where I last saved a file? For example, let's say there are (10) ten PDF's on a website, and I want to use Preview.app to open and save
-
How do i remove the purchased apps on the list where you go to app store-updates-purchased
well i downloaded an app im not supposed too and i want to delete before anybody sees it so thats why am asking here pease help me
-
ORA-02095 how to change db_domain
I tried with scope=spfile and failed (Release 10.2.0.5.0). Any Idea why ? SQL> alter system set db_domain=my.new.domain scope=spfile; alter system set db_domain=my.new.domain scope=spfile ERROR at line 1: ORA-02095: specified initialization parameter