IDOC adapter Retry interval

Hi
I am doing File-IDOC scenario.
For each 5 min there will be new file coming to the FTP folder..sender File adapter needs to pick the file and send as IDOC to R/3.
Each file consist of multiple lines..so i am using IDOC bundling..so for each file i am sending aroung 50 IDOCs at a time toR/3..
I am using BPM for this scenario...( i know we can do this without BPM also...but i have to use BPM..)
if R/3 system is down...then i am waiting for 2 min..and through deadline branch i am canceling the process...assuming that receiver system is down..and throughing alert to support team to intimate the same...
Each adapter is having default Retry interwal...if that adapter fails to send to the receiver...by default it will try for 3 time..with time interwal gap of 5min(i think) between each retry..
For each 5 min i will get a new file...so i have mentioned 2 min for deadline branch...
what happens if the IDOC adapter succeded in seconed attemt.(i mean after 5min) to send to receiver (here R/3)..?
--> i am sending alert to support team...but IDOC has sent succefully..which should not happen..so either we have to decrease the IDOC retry interwal or need to increase the deadline branch inerwal...
Questions:
What's the default retry interwal for IDOC adapter??
Can we decrease IDOC retry interwal time as normal file adapter in Visual admin..??
if i increase the Deadline branch time interwal...it will keep on trying to send first file..so waiting status..if sencond file comes after 5 min...it will also wait status..will there be any problem...??
Thanks
Murali

>>What's the default retry interwal for IDOC adapter??
Can we decrease IDOC retry interwal time as normal file adapter in Visual admin..??
No. Idoc adapter is not part of Java stack and hence you cant alter any idoc adapter settings in VA.
When the Idoc adapter fails, the message fails in SXMB_MONI unlike other adapters which pass through SXMB_MONI.
So, incase of Idoc adapter the restart depends on the reprocessing the error messages in SXMB_MONI.
Usually the report to restart errror messages in SXMB_MONI is scheduled as a background job.
You need to check for that. But in most cases, the interval is a few hours rather than minutes.
Jai

Similar Messages

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

XI Business content for MDM - Syntax error in IDOC adapter

Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Generated ADRMAS IDOC is
 <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
 <IDOC BEGIN="1">
 
 <EDI_DC40 SEGMENT="1"/>
 <xsl:apply-templates select="."/>
 </IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveen

Moorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen

Error using IDOC adapter

Hi All,
I'am trying to run the following scenario:
FILE --> XI --> IDOC (r/3).
Data is read and mapped towards an internal format. Then a mapping from the internal format to MATMAS_BAPI01 is done.
I disabled EDI_DC40 and did the needed mappings.
When I execute the scenario I get the following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>MSGGUID CA9DC2E01F1211DA9EED000D56B9D8A6: Control record must start with tag EDI_DC40, not E1BPMATHEAD</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: MSGGUID CA9DC2E01F1211DA9EED000D56B9D8A6: Control record must start with tag EDI_DC40, not E1BPMATHEAD</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I expected that the XI system would automaticly fill in the needed info in EDI_DC40.
Does anyone has an idea what is going wrong?
Kind regards
Message was edited by: Geert Wouters

hi,
most probably your idoc message
has a wrong format
when you import your new idoc to integration repository
does it have EDI_DC40 at the beggining?
BTW
try without disabling the edi_dc40
you cna also have a look at my weblog:
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
Regards,
michal
Message was edited by: Michal Krawczyk

Value for Retry Interval in Sender File Communication Channel

Hi All,
I am trying to set Retry Interval for File Adpter as null as per Help.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm</a>
But I am getting error in Communication channel/Adapter Monitoring as invlaid configuration. How to specify null value as described.
Thanks in advance.
Regards,
Sudharshan

Hi Michal,
I am trying this option to solve the problem in following thread.
Problem with Sender File Content Conversion Communication Channel
0 is considered to be a valid Configuration, but I dont know whether it is equivalent to null that they are describing.
Regards,
Sudharshan

IDOC adapter and number of tRFC records

We have idoc inbound scenario file -> XI -> idoc -> R/3.
For each file record an IDOC is created.
Can somebody explain, why only one tRFC record is created containing all IDOCs? Can you influence with interface config how many tRFC records are created? Does settings ' exactly once ' / ' exactly once in order ' have something to do with how many tRFC entries are created?
We faced a situation with our interface scenario that file unexpectedly contained huge number of records causing huge number of idocs generated in XI. However only one tRFC entry was created that contained all idocs. As consequence the receiving system had performance problems and the tRFC call had to be cancelled.
As workaround we splitted the source file in file adapter to interval of 1000recs, thus causing multiple tRFC records created and performance was ok in background system.
Is XI trying to keep IDOCs created out of each incoming message in one "LUW" and send them alltogether in one tRFC call to R/3? Or is there a config parameter that each created IDOC could be sent independent of other idocs still to be created?
br: Kimmo

Kimmo,
There will be one TRFC call per message from XI.
The whole input file is treated as a XI message.
The Receiver IDOC Adapter call the SAP system via ONE TRFC call and posts the message.
By mentioning Exactly Once in the Receiver Idoc Adapter Communication Channel, XI guarantees the delivery of that message.
One way is to split the file into multiple Messages.
You can do this via BPM. But this is not advisable for large files.
We had the same problem for very large files.
We used XI to just pass through the file from Source system and post as file in the Application Server of SAP.
We defined a LSMW project for Periodic Processing, which would take this file and post as Idocs in the SAP System.
Our Scenario
File -> XI -> File.
In the Receiver File Adapter, use the Execute Operating System Command to trigger event sapevt in the SAP system.
You can define events for Background jobs.
So when XI posts the file in the Application server of SAP, XI will trigger the background event defined in the Communication Channel.
The LSMW project which has been scheduled to listen to this background event will kick off.
Hope this helps.

Receiver IDOC adapter - RFC_NO_Authority

Scenario:
EDI (Sender File adapter)-->PI7.11-(Receiver IDOC adapter)---->ECC
Went thru receiver determination, Interface determination, message split, request message mapping, Technical routing and then got stuck at call Adapter stage. Below is the error:
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Runtime error RFC_NO_AUTHORITY has occurred</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error: Runtime error RFC_NO_AUTHORITY has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Is there any step that I may have missed after I created the receiver IDOC Channel?
Could you please shed some light here?

Please, search SDN before posting....
check these link: Runtime error RFC_NO_AUTHORITY has occurred in SM58
What its error?

Receiver Idoc adapter - issue

Hi,
I need to send an IDoc (CRMXIF_ORDER_SAVE_M01) to SAP CRM. The trouble occur when having/wanting to use/send only the segments that apply to release 620.
In order to do that I have in my receiver IDoc adapter specified the value '620' in the Segment Version part.
As soon as having done this my IDocs fail in the adapter giving me the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E101CRMXIF_ACTIVITY_X', segmentnumber '000001' not correct in structure CRMXIF_ORDER_SAVE_M01</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E101CRMXIF_ACTIVITY_X', segmentnumber '000001' not correct in structure CRMXIF_ORDER_SAVE_M01</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The segment specified in the above corresponds to the very fist sub-segment to the main segment (BUSTRANS). So if removing that segment the error jumps to the next segment (which would then be the first sub-segment).
Should be noted that I have no trouble sending IDocs if I've either not specified a Segment version (meaning latest version is automatically used) or if I explicitly request the latest by entering the latest segment release (700 in my case).
<Trace level="1" type="T">Convert one IDoc</Trace>
<Trace level="2" type="T">Convert Control Record</Trace>
<Trace level="2" type="T">Convert Data Records</Trace>
<Trace level="3" type="T">Segment= E101CRMXIF_BUSTRANS</Trace>
<Trace level="2" type="T">Ignore unknown Segment E101CRMXIF_BUSTRANS</Trace>
<Trace level="2" type="T">Ignore segment field: APPL_SNAME</Trace>
<Trace level="2" type="T">Ignore segment field: OBJECT_TASK</Trace>
<Trace level="2" type="T">Ignore segment field: OBJECT_GUID</Trace>
<Trace level="2" type="T">Ignore segment field: OBJECT_ID</Trace>
<Trace level="2" type="T">Ignore segment field: PROCESS_TYPE</Trace>
<Trace level="2" type="T">Ignore segment field: OBJECT_TYPE</Trace>
<Trace level="2" type="T">Ignore segment field: POSTING_DATE</Trace>
<Trace level="2" type="T">Ignore segment field: DESCR_LANGUAGE</Trace>
<Trace level="2" type="T">Ignore segment field: DESCR_LANGUAGE_ISO</Trace>
<Trace level="2" type="T">Ignore segment field: LOGICAL_SYSTEM</Trace>
<Trace level="2" type="T">Ignore segment field: CRM_RELEASE</Trace>
<Trace level="2" type="T">Ignore segment field: CLIENT</Trace>
<Trace level="2" type="T">Ignore segment field: CREATED_AT</Trace>
<Trace level="2" type="T">Ignore segment field: CREATED_BY</Trace>
<Trace level="2" type="T">Ignore segment field: CHANGED_AT</Trace>
<Trace level="2" type="T">Ignore segment field: CHANGED_BY</Trace>
<Trace level="2" type="T">Ignore segment field: LOCAL_TIMEZONE</Trace>
<Trace level="2" type="T">Ignore segment field: OBJECT_ID_OK</Trace>
<Trace level="2" type="T">Ignore segment field: HIGHEST_ITEM_NO</Trace>
<Trace level="2" type="T">Ignore segment field: CRM_CHANGED_AT</Trace>
<Trace level="2" type="T">Ignore segment field: CALC_SCHEMA</Trace>
<Trace level="2" type="T">Ignore segment field: SCENARIO</Trace>
<Trace level="2" type="T">Ignore segment field: VALID_FROM_EXT</Trace>
<Trace level="2" type="T">Ignore segment field: VERIFY_DATE</Trace>
<Trace level="3" type="T">Segment= E101CRMXIF_ACTIVITY_X</Trace>
<Trace level="3" type="T">Segment= E101CRMXIF_ACTIVITY</Trace>
<Trace level="3" type="T">Segment= E101CRMXIF_ADDRESS</Trace>
<Trace level="3" type="T">Segment= E103CRMXIF_ADDRESS</Trace>
<Trace level="3" type="T">Segment= E107CRMXIF_ADDRESS</Trace>
<Trace level="2" type="T">Ignore unknown Segment E107CRMXIF_ADDRESS</Trace>
<Trace level="3" type="T">Segment= E101CRMXIF_ADDRESS_F</Trace>
<Trace level="3" type="T">Segment= E101CRMXIF_ACT_REASON</Trace>
<Trace level="3" type="T">Segment= E101CRMXIF_ACT_REASON_F</Trace>
Hope someone can help me so that I can succesfully limit the segment version used when sending Idocs.
Best regards,
Daniel

Hi,
Thanks for your quick reply.
The funny thing is that even if a try to post the exact same idoc (except for the EDI part) that I have received from CRM it still fails in XI with the before mentioned error.
But to answer your questions:
1. I'm not using java mapping but traditional message mapping (meta-data are up-to-date and structure is newly loaded).
2. No blank segments are being created
3. All segments have value 1 or blank (using blank works fine for me, that is when not trying to limit Segment version. But using 1 makes no difference)
Best Regards,
Daniel

Receiver IDOC adapter - IDOC_ADAPTER" ATTRIBUTE_IDOC_METADATA

Scenario:
EDI (Sender File adapter)-->PI7.11-(Receiver IDOC adapter)---->ECC
I'm getting an error (below) at the Call Adapter stage:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>I::000</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error: I::000</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Then I went to IDX2 and deleted the IDOC (in this case, ORDERS05) and tried to create the IDOC again, but I get a pop up window with
I::000
and thus the IDOC can't get recreated.
Need to mention that both PI and ECC enviroments that I'm working in are sandboxes (XS1400 and RS1400) that are copies of our Development environment (XD1400 and RD1400).
Can someone please shed some light?

Hi,
Addition to the above
Check the port name you are mentioned in the receiver idoc adapter it should not be with client no...
it should be only SAPSID..(SID is your system name..)
HTH
Rajesh

Reciever idoc adapter Determination error

Hi,
I have scenario File-XI-R/3.I am using Idoc adapter to send data to R/3.
I am getting Reciever determination error.I have done all the steps according to the below weblog.
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
When I test my steps in configuration with test tool it is succesfull but give me error at runtime.
Below is error description.
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Plz help me out if any one has some idea abt it.
Thanx
Rekha

Hi Rekha,
The End Point Type for your scenario should be an IDoc Adapter with parameters from your RFC destination in SM59.
The most common reason for this error is:
1. An error in configuration of sender adapter/proxy: wrong sender business system or namespace or interface name. Look, all this information you must put manually so be carefull on typos (one wrong or ommited letter and you can spend hours looking what is wrong). Copy (from Repository) and paste procedure is strongly recommended.
2. An error in Directory (Endpoint Configuration). Be careful to specified the correct host and port!!!
Hope this helps.
Regards
Suraj

Question About IDOC ADAPTER

I test a scenario as file->xi->IDOC->R/3
and another scenario as R/3->IDOC->XI-file
i think, it should be two Communication channel
to R/3,one is Receiver another is Sender
But when i create the channel ,after select the adapter
tyep as IDOC, i can not select the Channel as a Sender
Can only set it as a Receiver
why?
and when i test the first scenario , the flowing error
appers(my test idoc message is 'CREMAS03':
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>I:IDOC_ADAPTER:209 66609E10320A11D9ABCB000F1F6BBAD1 E1LFA1M</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Fehler: I:IDOC_ADAPTER:209 66609E10320A11D9ABCB000F1F6BBAD1 E1LFA1M</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
all of setting seems fine.

The IDOC adapter does not need a sender channel, as all information the XI needs are stored in the message itself. Sender channels are requested mostly for polling adapters like file of jdbc. HTTP-, RFC-, IDOC- and XI-adapter do not need a sender channel (see manual for further details).
The error message seem not to be translated in your system. Here is the message text:
"MSGGUID &1: Control record must start with tag EDI_DC40, not &2"
So in the payload there is no control record for the IDOC.
Check in your IDOC receiver channel, if the checkbox "Apply Control Record Values from Payload" is marked. If so, uncheck it. That should help.
Regards
Stefan

IDoc Adapter throws error

We are trying to send data to SAPR/3 47 IDES using IDoc Adapter.
the data is sent to XI from SQL database thro JDBC adapter and then to R/3 thro IDoc adapter.
All this is in Asynchronous mode and at no point we chose synchronous (IDoc adapter does not suppost Asynchronous process right).
But we are getting the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>B7685EB2-42F1-554B-80CC-6ADFC86C7975</SAP:MessageId>
<SAP:RefToMessageId>35A42550-81F9-11D9-AFC7-00C09F450580</SAP:RefToMessageId>
<SAP:TimeSent>2005-02-18T22:05:33Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>S70_812</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">DEBMAS.DEBMAS04</SAP:Interface>
</SAP:Sender>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_BE_NOT_SUPP</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Only asynchronous processing supported for IDoc adapter outbound processing</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
We are not sure where from this synchronous is being picked?
Please advise.
Thanks,
Bhaskar and Anil

In the Processing Parameters section of the JDBC adapter, make sure you have Exactly Once (Asynchronous) selected.

ATTRIBUTE _ WRONG _ INTF error in idoc adapter

hai
iam creating file to idoc scenario in that
iam copying the CREMAS in to XSD file
and chenge the occurence of name1
filed.
and this xsd file iam using at reciving side interface
my reciver adapter is idoc adapter
sender adapter is file adapter
when i configure this
iam getting this error
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>CRMAS_IF</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface CRMAS_IF</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
so pls any body can help me
what is this error

hai
THANKS FOR UR HELP
NOW IAM GETTING THIS KID OF ERROR
WHAT IS THIS IAM NOT UNDER SANDING
During the application mapping com/sap/xi/tf/_cr_mp_03_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformation
iam trying to vreate multi ple segments at reciver side for one field .at that time iam getting this error
i changed the occurs of that filed to unbouned .
is it need to change the idoc structure at r3 system also ?
can any body help me pls
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_cr_mp_03_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_cr_mp_03_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

How many times does the JDBC sender adapter retry ?

Hi All,
How many times does the JDBC sender adapter retry in the ' Retry Interval' specified .
I know that it retries after the time specified in the ' retry interval' , but if it again fails after the first retry will it retry again and again .And while doing it will it block the next Select query which should get executed.
Thanks & Regards,
Rahul

Hi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM

'number of retries allowed & retry interval in seconds' does not working

Hi Guys,
Is there a way to schedule a report to run,and if the report job fail for whatever reason, retry the job again immediately, and automatically?
I've tried use 'number of retries allowed' and 'retry interval in seconds', but it doesn't work.
Is there any setup that we missed?
note:
i can receive notification [failed/success] through email without any problem..

Hi,
I think, for adapter engine, you can do it in Visual Admin.
Refer this blog-
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Regards,
Moorthy

IDOC adapter Retry interval

Similar Messages

Maybe you are looking for