IDOC --BPM--IDOC AND FILE

Hi Experts,
My scenario is idoc to idoc and file through BPM.
so I hve one integration process and 2 receiver.The prob is frm IP it is pointing to only file not to IDOC
1) 1 sender agreement
2) 3 receiver determination
3) 3 interface determination
please help me out..

Why are you using BPM for this?it is not good design.
If you want to still use bpm then
1)1 receive step,
2)2 transformations steps(if or are executing Operation mapping in IP).
3)2 send steps.
check your BPM design and monitor Integration process work flow.
Regards,
Raj

Similar Messages

  • IDOC - BPM - IDOC  Error --no sender or receiver interface definition found

    I have an integration scenario, IDOC - BPM - IDOC. SAP will send ACC_GL_POSTING IDOC to XI, a BPM will start and then the BPM will send an IDOC to another SAP system.
    I have read instructions on weblogs:
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    The scenario has been successfully tested in the Test Configuration Tool. However, when I try send IDOC from the source, I received the message below in the trace.
      <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
      <Trace level="3" type="T">Processing mode is</Trace>
      <Trace level="3" type="T">created BPE proxy for message B45CB0079DFA814BAD22CD1ED64CA6AB</Trace>
      <Trace level="1" type="B" name="interface activity determination">
      <Trace level="1" type="T">Version 000</Trace>
      <Trace level="1" type="T">Message status 000</Trace>
      <Trace level="1" type="T">Interface action INIT</Trace>
      <Trace level="1" type="T">(must be INIT for a new determination)</Trace>
      <Trace level="1" type="T">start CHECK_INTERFACE</Trace>
      <Trace level="1" type="T">--start sender interface action determination</Trace>
      <Trace level="1" type="T">select interface ACC_GL_POSTING.ACC_GL_POSTING01*</Trace>
      <Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
      <Trace level="1" type="T">no interface found</Trace>
      <Trace level="1" type="T">--start receiver interface action determination</Trace>
      <Trace level="1" type="T">Loop 0000000001</Trace>
      <Trace level="1" type="T">select interface ACC_GL_POSTING_abs*</Trace>
      <Trace level="1" type="T">select interface namespace http://summaryFinancial.sap.dominofoods.com</Trace>
      <Trace level="1" type="T">no interface found</Trace>
      <Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
      <Trace level="1" type="T">Hence set action to DEL</Trace>
      <Trace level="1" type="T">end CHECK_INTERFACE</Trace>
      <Trace level="1" type="T">Set interface action DEL into MAST</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA" />
      <Trace level="3" type="T">inserted message into pipeline PE_ADAPTER</Trace>
      <Trace level="1" type="Timestamp">2007-04-30T18:32:30Z EST qRFC raised on XBQO$PE_WS91000003</Trace>
      </Trace>
    Thanks,
    Sergio

    Rajeev,
    The source system in the receiver determination is connected to R3. Other IDOCs are coming across the XI system.
    Below is some trace information in the Receiver Determination.
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Start without given receiver</Trace>
      <Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
      <Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
      <Trace level="2" type="T">...valid Receiver w/o Condition: - IP_GeneralLedger</Trace>
      <Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
      <Trace level="2" type="T">Number of Receivers:1</Trace>
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) IP_GeneralLedger ACC_GL_POSTING_abs</Trace>
      <Trace level="2" type="T">...valid InbIf without Condition: ACC_GL_POSTING_abs</Trace>
      <Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
    Thanks,
    Sergio

  • Idoc - BPM - Idoc

    Hi,
    My Scenario is as below:
    An Idoc is sent from ERP to XI. based on a value in a specific segment, It has to call a Web Service. The outcome of Web Service has to be put into another segment of idoc and send the Idoc to CRM.
    I have done configuration in such a way that Idoc from ERP goes directly to CRM. This is working properly.
    Now I have to use BPM to model the above process instead of Idoc directly going from ERP to CRM.
    Can any one help me of how I should start this scenario in BPM. What is the first step in modelling this using BPM.
    Thanks,
    Prasanna

    Hi
    Go through this link for reciever IDoc Adapter
    <b>http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/content.htm</b>
    And this is a link of Problem Analysis Guide <b>Sending an IDoc through XI Failed</b>
    <b>http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm</b>
    Hope it help
    Regards
    Arpit Seth

  • IDOC-BPM-FILE scenario ERRORS

    Hi gurus,
    I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
    but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
    this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
    I have a data type DT_FILE for writing to the file.
    I have interfaces:
    si_oa_iorder(outbound asynchronous interface for file)
    si_aa_iorder(abstract asynchronous interface for idoc)
    si_aa_file( abstract asynchronous interface for file)
    si_ia_file (inbound asynchronous interface for file)
    I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
    I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
    (( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
    My IP is very simple with just a 'recv step' having container element of  type si_aa_iorder and 'send step' having container element of  type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
    I have created Configuration objects like
    Business System for file receiver
    Business component for Idoc sender with adapter specific details set
    Communication channels for Idoc and file adapters
    No sender agreement as it is Idoc communication
    Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
    2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
    2 interface determinations , one from si_oa_iorder of  BC_idoc_send  to IP and other from si_aa_file  of IP to file recv system.
    This is my setup and this fails....
    My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
    please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
    Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
    Regards
    Jhansi

    Hello,
    I am trying to implement one pi scenario :
    File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
    The web service that I call works file from wsnavigator. I have created all the design and configuration objects
    needed for the scenario.
    I place a file with following contents:
    <?xml version="1.0" encoding="utf-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
      <SOAP-ENV:Body>
        <pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
         <pns:name1>ajeet</pns:name1>
          <pns:name2>phadnis</pns:name2>
        </pns:GetSetNameWS>
      </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    When I look at the process monitor I get this:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Determination
      -->
    - <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
      <SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    I have no clue about this error. Can you help me with this ?
    If yes I can send you more details, if you liked 
    Hoping to get help from you,
    Cheers,
    Ajeet Phadnis

  • Idoc-bpm-file scenario

    Hi gurus,
    I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
    but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
    this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
    I have a data type DT_FILE for writing to the file.
    I have interfaces:
    si_oa_iorder(outbound asynchronous interface for file)
    si_aa_iorder(abstract asynchronous interface for idoc)
    si_aa_file( abstract asynchronous interface for file)
    si_ia_file (inbound asynchronous interface for file)
    I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
    I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
    (( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
    My IP is very simple with just a 'recv step' having container element of  type si_aa_iorder and 'send step' having container element of  type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
    I have created Configuration objects like
    Business System for file receiver
    Business component for Idoc sender with adapter specific details set
    Communication channels for Idoc and file adapters
    No sender agreement as it is Idoc communication
    Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
    2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
    2 interface determinations , one from si_oa_iorder of  BC_idoc_send  to IP and other from si_aa_file  of IP to file recv system.
    This is my setup and this fails....
    My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
    please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
    Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
    Regards
    Jhansi

    Firstly, you said you are not using any Switch, then how are you specifying the condition ?
    Secondly, your interface is not dependent on the BPM, its dependent on the configuration. BPM is a representation on how the interface works in step-by-step manner.
    So, while checking the condition order type = 'PM01', you must be using the Switch, i believe, which has to options Branch1 and Branch Oherwise. Branch1 means when the condition is TRUE and BranchOtherwise is when condition is FALSE.
    If you can let me know the condition statement that you have given in the Switch, I can try to tell you more.
    -Sid

  • BPM Collect Pattern:File to IDoc

    Hi,
    My scenario is File to Idoc. An invoice excel file will be sent by the vendor.The excel has a built in macro, which converts the excel to a csv file and file is placed in a file share server.
    *Logic of Macro: *
    There will be a button in the excel file containing macro. In one excel file there would be multiple invoices that contains different number of item lines, The macro checks the u2018Invoice Numberu2019, lines with the same invoice number will be saved in one CSV file. So for example a excel file contains 5 invoices, when press the button that contains the macro, there will be 5 CSV files created under the same path, each CSV file contains one invoiceu2019s information.
      After this I have to post the Inovices in to SAP using an IDoc.
    So, I am using BPM collect pattern to achieve this. In the collect pattern,  I see a correlation defined on one of the source fields,  What does correlation exaclty do in my  case. Let's say I have defined a correlation on Source field called Invoice number.
    BTW I am using FCC on the filed adapter to change the CSV(Invoice) to xml
    Thanks,
    Kiran

    Hi
    to use Xpath for your receiver det. ref these blogs;
    a combination of logics should help you in this case ...
    Customise your 'XPATH' Expressions in Receiver Determination
    XPath to show the path (Multiple Receivers)
    File to Multiple IDocs (XSLT Mapping)
    Try removing BPM from ur scenario.
    1:n could be achieved without BPM
    Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
    Regards,
    Suryanarayana

  • BPM: Multiple IDOC collect into one file

    Hi
    I have done collecting multiple IDOCs of same type into one file using BPM
    I have used the following blog which is collecting different types of IDOCs.
    IDOCs (Multiple Types) Collection in BPM
    But i have done collecting of IDOCs which are same type.
    Source side it is showing successful and its reaching to BPM also . But in target i am not getting any file. Could any one please help me how to check where exactly I am failing.
    Thanks & Regards
    Sowmya

    Check whether the Outbound Status is successful or not in sxm_moni. Is there any message created from Integration Process to receiver File system.
    Check this
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a22ce8-8e72-2b10-3fba-e9511c6f0b8b
    Regards,
    Prateek

  • IDOC- BPM- File - Acknowledgements

    The Scenario is to send IDocs from SAP through BPM to a file system. I want an acknowledgement to be sent back to SAP system incase of any error while writing the file. To simulate an error, I am giving an unauthorized file path. I have enabled application acknowledgements in the send step of BPM. I receive a negative acknowledgment from the File system to BPM saying unauthorized. But the acknowledgement from BPM to SAP system has the status 'Waiting for an acknowledgement' and the status of IDOC in SAP is still '03'.
    Please note that in case of successful message, the acknowledgement is sent all the way back to SAP and the status of IDOC is set to '41' from '03'.

    Vinoda, Are you sure the file system is sending you an Application acknowledgement ? To receieve an application acknowledgement in your send step, the receiver Business System should be capable of sending an acknowledgement back, i doubt whether a file system is capable of doing it, unless you have designed a clever mechanism of doing this. was just curious...
    Thanks
    Saravana

  • Maximum size of XML files and number of IDocs for IDoc receiver adapter

    Hi Guys,
    We have an XML file to IDoc scenario where XI picks up an XML file with multiple Customer records in it, it does a simple mapping and creates one DEBMAS06 IDoc per record in the XML file. All IDocs are sent in a single file in XML-IDOC format to IDoc adapter which then posts the separate DEBMAS IDocs to R/3.
    a) What is the maximum size of XML files that XI can handle with mapping involved ?
    b) What is the maximum number of IDocs in a single file that the receiver IDoc adapter can handle ?
    The first time this interface runs almost 200,000 Customer records will be exported in one XML file.
    Thank you.

    Hi,
    Well it is difficult to find out the  maximum Size of xml messgaes that can be processed by XI and also Maximum number idocs an recevier Idoc adapter can handle.
    This totally depends on your production system loads and the limits can be set totally on trail & error basis..
    In my heavy loaded production system, i found out that the maximum size of the successfull messages after processing by XI is around 75 MB (seen in transaction SXMB_MONI). Whereas messages with size around 100 MB went into error.
    I havent encounter any such limits with respect to Idocs.
    I would suggest that you divide your data into smaller chunks and sent it part by part instead of sending it all once since you data size is huge.
    You can vary your batch size as per your system load.
    Regards,
    - Deepak.

  • BPM Idoc collection without calling the mapping in BPM

    Hi Expert,
    I have an IDOC to file scenario in which source side I have to collect multiple IDOC and map it to a single file .I am achieving it through BPM . at present I am using one multimapping and calling this mapping in the BPM under transformation step its working  fine  but due to some constraint  , Now I want to achieve it using BPM but without calling the Mapping in the BPM i.e I don't want to use Transformation step in the BPM. Is it possible ????
    Regards,
    Saurabh

    Hi Saurabh,
    If that is the case it is preferable to collect the IDocs in ECC and then send them to XI at one go.
    Cheers !
    Lokesh

  • IDOC-XI-Webservice-XI-FIle

    Hi,
    I am doing IDOC-XI-Webservice-XI-FIle,
    I am using Asyn-synch bridge.
    While I am creating Synch_ABS ( IDOC & File ) it is showing that u cannot create interface with IDOC & non IDOC,
    How should i proceed the scdenario.
    Regards,
    Jayasimha Jangam

    Hey,
        Create a request structure for webservice
        Create a response structure for webservice.
        Create a Structure for file.
         Map the idoc with the webservice request structure.
         Map the webservice response structure with the file structure.
       Abstract asynchronous interface:- Idoc
       Abstract synchronous interface
                   Request:- request webservice
                   Response:- response webservice
    Abstract asynchronous interface:- file
      BPM design
    Receive step:- abstract asynchronous interface
    Transformation step:- mapping between Idoc and webservice request
    Send step:- abstract synchronous interface
    Transformation step:- mapping between Webservice response and file
    Send step:- abstract asynchronousp:- file
    regards,
         Milan

  • HR - XI - External System: one IDOC to multiple XML Files

    Hi,
    I have a scenario where I need, out of one HRMD_A07 IDOC send multiple XML files:
    The IDOC and the XML files can the Master data for many employee (IDOC has max of 200 as of SAP, external system, max of 1000).
    The IDOC will be generated with change pointers with all the needed filters (I can add/remove if needed).
    My goal is to generate 3 types of XML files:
    - 1 for the persons (containing basic info like name, firstname, persnr,etc)
    - 1 for the various unit (with basic info of unit like number, description & name)
    - 1 for the links between persons and units (this person is linked with that unit)
    The structures of the 3 XML files are know and can be imported via XSD definition.
    Do I need to use BPM for doing so or is there a way to do that with simple mapping?
    If BPM is needed, as I new to that, if you have a link to a begginer guide, fell free to send it
    Cheers,
    greg

    hi,
      For your scenario there is no need of BPM.
      In message mapping select the message tag.
      In the target add 3 message types.
      Just map the fields.Go to Interface mapping add the 3 message in the target.
      Get the mapping.
      In ID sender agreement,Receiver Determination is same.
      In Interface Determination select extended.Get the mapping.
      Create 3 Receiver agreement for each Receiver.
    Regards,
    Prakasu

  • Sending multiple IDocs (all in single file) to FTP via XI

    Hi All,
    We have a requirement as below where we are looking for various feasible solutions.
    The requirement is to collect multiple IDocs in ERP (2000-5000 in number) per day (either Flat File or XML) and needs to be sent as a single File (which has all these IDocs) to FTP Server via XI.
    BPM is not allowed to use and we are working on PI 7.0, so IDoc packaging is also not applicable. There is no mapping required, we need to just route them to FTP from ERP System.
    Looking forward for various solutions.
    Regards,
    N. Jayanth Kumar.

    Hi,
         Using the XML file port at R/3 to collect the Idocs would be a feasible solution. Also, as Sunil as already pointed out, you can configure this as a pass through interface, which will improve your overall processing time.
    Another solution can be to pass the Idocs to PI and then use the append mode in the receiver file adapter to collect the days idoc into a single file.
    To append only idocs for a particular day, try using dynamic filename, where file would have the date in it. This way, only Idocs for a particular day would be appended.
    Regards

  • R3(Idoc) - XI -JDBC,DB2 / File

    My Scenario is to get Idoc from R3 and based on a value in the payload I need to query DB2 Database on AS400/DB2 system before sending all these details to File System. Can someone please explain me steps involved to complete this scenario.
    Thanks a lot.

    Hi Ram,
    After calling DB2, do you need to get any data from the DB2 and then send it to File ? Is this is the Requirement?
    Then you can go with BPM and like this
    <i>Recieve the Idoc Message
    Send the Query to the DB2 sycnrnously
    After receiving the Response send the message into File system.</i>
    the bpm flow will be something/similar like this-
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    Regards,
    Moorthy

  • IDoc to JDBC  and JDBC to IDoc Scenario

    Dear All,
    I am working on IDoc to JDBC and JDBC to IDoc Scenario.
    I have to send Idoc from SAP to Non SAP system(.NET application) i almost configured in XI but still i don't know when my INTEGRATION will INVOKE how my data will proceed from IDOC to Oracle database(Through JDBC) and in case of revese how and when Data flow will start.
    Does anyone have completed STEP by STEP scenario document for this?
    How my Idoc will sent to XI?
    How XI will pick up data from IDoc?
    How XI will Convert data to JDBC and UPDATE in Oracle Database?
    And i reverse case(JDBC to IDoc) when my INTEGRATION will INVOKE?
    Where and When i can watch my process and data?
    How can i test the whole integration?
    I AM GETTING ERROR WHILE TESTING CONFIGURATION IN Integration Directory "Error while refreshing the XI runtime cache" and when i check this in SXI_CACHE  it gives me error
    "Unable to refresh cache "NO_BUSINESS_SYSTEM"
    "Error during last refresh to cache"LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
    Please solve all the above problems i will reward u points
    thanks,
    RP

    Hi,
    While we working on IDOC to JDBC interface..
    We have to deploy JDBC Drivers?
    Go through this links,
    /people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
    To install JDBC driver follow the how to guide.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
    Configuration of JDBC Adapter for SQL Server
    JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
    Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
    UserID and Password.
    If the connection is not working find the correct port number.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
    JDBC- X I -  R/3 Scenario
    /people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    Please check the driver path as mentioned below.
    JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
    Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
    No JDBC driver required.
    Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
    follow this thread
    Re: Problem when connecting to MS Access through JDBC Adapter.
    SAP Note 850116 has details
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    Configuring the Sender JDBC Adapter
    http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
    Configuring the Receiver JDBC Adapter
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
    Idoc Reveiver adapter..
    http://help.sap.com/saphelp_erp2004/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
    Thanks,
    Satya Kumar
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    Edited by: SATYA KUMAR AKKARABOYANA on May 8, 2008 5:51 PM

Maybe you are looking for

  • How to handle multiple developers

    Hello, our company is getting into SAP to prepare an abap-objects course. As we are working with about three people on one AS installation, we wanted to use different users to login and not BCUSER for everyone. The problem is, that those other users

  • Correlation ID after installing SP12

    Hi, does any correlation ID exist after installing Support Package 12? Thanks for your answer. Regards Stefan

  • Where find tools to import images tiff, jpeg, gif, bmp, etc.

    Hi, im trying to import images to my raster tables, but can't find some tool to do this, Somebody knows some? Mapviewer support view images in format TIFF? What formats support importFrom tool of PL/SQL?

  • Tnsping.exe using 90% of my CPU time . HOW TO SOLVE IT?

    Hi, While im runnning my application which is using Oracle 10.1 release database(OS Windows XP) tnsping.exe is using 90% of CPU Shocked (while i check in Task Manager).Please help me to resolve this problem. With Regards SUVIN PRATHAB www.sceneworks.

  • IDVD and PDF and readable letter types

    Hi, Am working on a iDVD project. I have a MS Word text in a pdf pulled into iDVD via iPhoto. But text in iDVD gives poor reading results, the text shows fuzzy. Futura 14, I have been trying with some other fonts, but still poor results Anybody any e