IDOC - Delete unwanted segments and reprocess the IDOC by WE19

HI all,
I have an issue and wanted your help at this point of time.
Case - Assume that an Idoc has been rejected by system due to few bad segments. Later i dentfied that in the Idoc few segments were bad and rest are good.
If i use transaction WE19 for copying the Idoc and during selection of the segment if i delete the bad segments and copy the rest which are good. Will the Idoc be processed sucessfully with a new Idoc number so that the Bad segments i will fix it up manually in ERP. Kindly suggest. If possible let me know if any implication behind that or anything you like to add in the process to help me out.
Kindly advice me.
Regards,
Pratap
Edited by: pratap kumar on Dec 20, 2007 5:02 AM

Hi Pratap,
Which Idoc did you process. For each message type certain segments are Mandatory.
for example in WPUBON01 -->following segments are mandatory
Control Record --- Message type / Partner Type / Port / Server ID etc.....
E1WPB01        --- Date / Time / Partner Number etc...
E1WPB02        --- Article type / Article Number / Quantity etc...
E1WPB03        --- Condition Type / Amount etc...
E1WPB06        --- Payment method / Total Amount / card number etc...
In control record we will have the port / System ID etc.
If other segments are not there leave it....it will process successfully.....
To find out error segment refer Table EDID4 and correct the segment and post it.
Regards,
ManiKumaar

Similar Messages

Hi.Have organized all my songs in itunes ,deleted unwanted songs and anupdated the album artwork but it has not changed them in my itunes media folder location in the C drive.How do i change this and back them up now i have everything the way i want it ?

Hi
-I have organized all my songs in iTunes ,deleted unwanted songs and updated the album artwork but it has not changed them in my iTunes media folder location in my C Drive.
How do I update it there so it is the same as my iTunes now so i can back it all up?
Thankyou.

I solved my problem. Here's how:
1. Right click iTunes and click properties from the "Windows 8 Desktop" (or if you want to call it the 7 desktop thats fine too)
2. Select the compatibility tab.
3. Set compatibility mode to Windows 7 and click apply.
4. Open iTunes, sign into iTunes store, Turn on iTunes Match, Add your computer.
5. Close Program
6. Restart Computer

Reprocess the IDOC

Hi,
I am devloping one report which will display some idocs.My requirnment is to reprocess (like BD87) those idoc which are there in error state.So is there any function module or program which i can call in report to reprocess the idoc?Or is there any alternative way to perform the same operation.

Check out function module IDOC_INPUT, which is pretty neat. Specify the IDocs that you want to process in table parameter UNPROCESSED_IDOCS and ignore the other tables parameters IDOC_DATA and IDOC_CONTROL (can be empty when calling the function).
Cheers, harald
p.s.: Problems with reports other than BD87 is that they usually only handle a specific set of IDoc status values (e.g. RBDAPP01 is only for unprocessed IDocs in status 64 or 66, RBDMANI2 for failed IDocs in status 51, RBDAGAIE for edited IDocs in status 69, etc.) - that's why I prefer to use the function module.

I have around 2000 photos on my camera roll as back up and now i am not able to delete unwanted photos and they are not even getting synced wid d computer so what should i do now?? they are using 9 gb of the space!!!

i have around 2000 photos on my camera roll as back up and now i am not able to delete unwanted photos and they are not even getting synced wid d computer so what should i do now?? they are using 9 gb of the space!!!

Chris CA wrote:
You cannot backup photos to iCloud.
You can enable Photo Stream (in Settings > iCloud) but only for 30 days and only a max of 1000 photos.
Then what does this mean? It was copied from the kb article that I posted above.
Reducing the size of your Camera Roll backup
If you take lots of photos and videos with your iOS device, you may notice your Camera Roll takes up most of your iCloud Storage backup. To check the size of the Camera Roll backup on your device:
On your Home Screen, tap Settings.
Tap iCloud.
Tap Storage & Backup.
Tap Manage Storage.
In the Backups section, tap your device.
In the Backup Options section, the backup size is displayed under Camera Roll.
To reduce the size of your Camera Roll backup, save your photos and videos locally to your computer with iTunes, and then manually back up your iOS device. If you want to keep your photos and videos on your iOS device, you can turn off Camera Roll in Backup (see the "Deleting backups and turning off Backup for your Device" section above) orpurchase additional storage.

PE 13: What is the best way to cut out an unwanted segment and leave a fade-out/fade-in overlap? Without multi-track overlaps?

I have a long video segment and want to remove unwanted segments and replace them with fade-in/fade-out transitions. I know that I can do this between two separate video tracks by fading out Video 1 and fading in Video 2 and having the two tracks overlap during the transition. Is there an easy way to do this on the same track? The way I've done this before is to cut out the unwanted segment, then move the two segments to separate tracks and overlap them.
To compound the problem, I have a separate audio track for the wireless microphone I'm wearing. I need to pull that into the fade transitions. So that's Video 1 and Audio 1 with Narration, all cut at the same time with overlapping fade-out/fade-in in the fewest steps. Can Premiere Elements 13 handle that?

billsbayou
Add On...I am weighing the merits of applying an audio transition directly below the video transition. Considering Crossfade's Constant Gain or Constant Power with a forced alignment of Between Clips. According to Adobe documentation
Adobe Premiere Elements Help | Applying transitions to clips
Adobe Premiere Elements includes two audio transitions in the Crossfade category: Constant Power and Constant Gain. Though both provide fades, they differ slightly. Constant Power creates a smoother-sounding fade, while Constant Gain, though mathematically linear, often sounds abrupt.
ATR

Reprocessing the idoc

hi ,
i am not able to reprocess the idoc when the satus is 62 on the inbound side....
how to reprocess the idoc.
what is the program to reprocess the idoc....

hi shyam,
u can first test the inbound idoc using we19, which is a testing tool. To reprocess an idoc u have to go to BD87.
first of all check status code of the idoc at different stages. so that u can track the problem.
Regards...
Arun.
Reward points if useful.

Modified idoc values are not reflecting in the IDOC display (ie we02)

Hello Team
I wrote one inbound interface for posting GR by using the IDOC MBGMCR03. In the inbound FM, i wrote some code for retrieving some data and mapping to its relevant fields of the segments. It is working fine but when i see the idoc values in WE02/WE05, i am not able to see the values which i have added in the FM. so please suggest me how to get the values in the IDOC display.
Regds
Raj

Hello Team
Thanks for your replies. Let me put my question in this way to you.
In the inbound FM (ie idoc_input_mbgmcr), i have fetched some values from SAP by using the values which came from PI to that IDOC through mapping. what ever the values i have fetched from SAP in inbound FM, i have mapped them to the relevent segments and finally the complete structure i have passed to BAPI, where it will post GR. All these things are working fine, idoc is also getting successfull.
But when i go and see the successfull idoc values, it is not showing the values which i have mapped in inbound FM. Now i want those values in that Final idoc.
So pls check and suggest.
Regards
Rj

HT1918 i can not change the address from USA to Canada so i live in Canada now How can i do that? or if i can not change How can i delete an account and make the new account by use the same email address?

because i can not use the Canadian card to redeem in my account from USA. should i delete an account and create the new one that should valid in Canada by using the same email address? or what should i do? (i really want to use my recent email)

Hi Kazmania89,
Welcome to the Support Communities!
If you require additional assistance with this, click on the link below for guidance:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Once you are able to gain access to the old Apple ID, this article may be helpful:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device? 
First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
Mac: iTunes for Mac: How to copy purchases between computers
PC: iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch.
Cheers,
- Judy

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a relat

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a related point in the video?

take have to take turns
and you have to disable one and enable the other manually

How could we delete transport request and task(the released one)

Hello
We have a released transport task(not request). Transport request is not released.
How could we delete transport request and task(the released one). Namely we would not like to transport it to production

Hi, never delete directly in table.
There are more tables which depends each other...
Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
Using program: RDDIT076 and changing status.

OFI_AP_4 Delete all data and REINIT the load to FIAP ODS and Cube

Hi bw GURUS I need a quick help, I have requirement to Delete all data and REINIT the load to FIAP ODS and Cube i have data source ofi_ap_4, please tell me what should i do as i know LO extraction but whats is the transaction code to run the set job for FIAP like for Purchasing I have OLI3BW now tell me what will be the steps to reinit the load to fiap ods and cube.
i know this much as below
Delete the data from cube and ODS
Delete the Init in Cube AND ods NOW reinit i mean load the init, but now problem is before doing that i need to run the set up job or tell me what are the steps please
its very important since i am doing in production
thanks
Soniya

You are right by your approach to update from PSA to ODS as u have wrritten before. Just got to PSA tree select the PSA request and choose update Immediatly or scedule for update.
(and if u have 0FI_GL_4 but u r not using it ..it is fine. I was telling that in case u have that and you are trying to use somethin with 0FI_AP_4)

Larry63 Jun 12, 2012 8:54 AM Subject: My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct? iPad I have this question too (0) Categories: Mail

Larry63
Jun 12, 2012 8:54 AM
Subject:
My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct?
iPad
I have this question too (0) Categories: Mail and Address book

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

TS3276 My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct?

Subject:
My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct?

Maybe ask someone in the Apple iPad forum. This is the Snow Leopard forum.

I deleted my files and emptied the trash. can i get the files back?

I deleted my files and emptied the trash. Can I get my files back?

Maybe...
If you have a removable battery, remove the battery and the power.
If not, hold down the power button until the screen goes back and you are forced to restart the Mac entirely from the power button (do not respond to any shut down window.
Either way, files may reappear in the trash, or where they were located.
If not, you'll probably need a data recovery program*:
http://www.macmaps.com/backup.html

Reprocess the IDOC without using BD87

Can I reprocess an idoc through a zreport in the background. can i use the program behind BD87 and use a submit statement?
But BD87 genertes an output from which you have pick your idoc and reprocess it manually.
Thanks,
krishna.

hi ,
See the status of the record and process the below program using Submit report by passing Idoc number
Program RBDMANI2 for status 51 & 52
Program RBDAPP01 for status 64 ,66
Program RBDAGAIE for status 32 and 69 (Edited IDocs)
Program RBDSYNER for status 26
Program RSEOUT00 for status 30
re-process IDocs failing in 29 status, use program RBDAGAIN.
Prabhudas

IDOC - Delete unwanted segments and reprocess the IDOC by WE19

Similar Messages

Maybe you are looking for