IDOC -- File (Multi-Mapping )

Hi Guys,
iam working on an IDOC --> File scenario.
I had used a multimapping to split the source file into three target files and for creating those three files i had used three differemt Inbound MI and Three different Comm Channels. The file is getting created in the designated directory but the data is not getting written.
Iam using NFS file system for this.
The message Monitoring is also showing that everything is getting processed with some bytes of data written into the file. Iam not able to find what is not working in this case.....
Can anyone tell me why the data is not getting written in the created file.
Any suggestion is appreciated.
Regards,
Kittu.

Hi Kittu,
1. Please check in SXMB_MONI if 'Call Adapter' is happening.
Check the payload here and see if payload is correct.
After this if the file is not written then check on the File content conversion.
Regards
Vijaya

Similar Messages

Regarding RFC to FILE - Multi Mapping

Hii
I am doing BAPI/RFC to File Asynchronous Scenario. The data is being Pushed from SAP via BAPI/RFC. For testing, I am sending the data form Test tool of RWB.
I am sending single BAPI/RFC with 3 PO, in the target I should get 3 files generated. I am using Multi Mapping. I am using Dynamic configuration for Filename and created UDF. My target filename should be Process_Order_%y%y%y%y%M%M%d%d%H%H%m%m%s%s
I had Mapped the UDF to the root node.
In the SXMB_MONI, I am able to see 3 files getting created. But in the target folder I am getting onlly 1 file with the 3rd PO content and the file name is correct. The first 2 PO's are missing.
When I testted the same with out UDF using Add timestamp in the File Adapter, i am able to get 3 files generated.
Any Inputs would be appreciated.
Regards,
Varun
Edited by: Varun Reddy on Jul 2, 2009 10:20 AM

But in the target folder I am getting onlly 1 file with the 3rd PO content and the file name is correct. The first 2 PO's are missing.
When I testted the same with out UDF using Add timestamp in the File Adapter, i am able to get 3 files generated
The files are not missing but the 1 and 2 files are getting overwritten by the 3 file........what is the name that is generated for the files by the UDF....i doubt it is the same name...and hence this is happening....
Whereas when you are using the Timestamp option you are getting all the files since the names are different......so that means you have to make some change in the file names so that you get all the three files....else there doesn't seem to be any workaround...
Regards,
Abhishek.

Multi mapping.. is it possible File to Idoc & FIle .. its urgent?????

Hi All,
File to Idoc & File.
I need to pick the file and i need to do multi mapping, so that from the file we can generate
one idoc which has to go to SAP and
one acknowledgment's file and sent back to partner.
Based on the below blog, looks like we can't use Idoc adapter when the target message is Idoc using Multi mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Can anyone suggest me how i can achieve this scenario without using BPM.??
Regards
Seema.

Hi,
The Multi mapping is possible without BPM but not for IDOC as its not part of Java Stack. IDOC adapter is on ABAP stack.
As Raj have suggested,
You could create two different Mappings one for file to IDOC and another for file to file as an acknowledgment.
In Receiver determination you need to use multiple receivers as IDOC --R/3 receiver and the File receiver system.
It will create the IDOC as well as push the acknowledgment to file also.
But incase if you get any problem with sending the IDOC then also you will get successful acknowledgment via file. So directly there will not be any relation between these IDOC and File receivers as an delivery recipt of IDOC.
Here either you have to use the IDOC acknowledgment feature or BPM or Alert notification to get the exact notification about the IDOC posting to receiver system.
Please refer below links
1. IDOC acknowledgment
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
How to Handle Acknowledgments for IDoc (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
IDOC acknowledgements
2. BPM
File to IDOC with BPM
File to idoc with BPM
Problem in BPM implementation
Use Aleaud in BPM
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
3. Alert Notification
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
Thanks
Swarup

Multi Mapping Base Runtime Exception

Hi all
Im getting a Base Runtime Excecption in Multi mapping. My scenario is File to IDocs.
when i test the message is IR its successful. However while testing End to end im getting Base Runtime excception.
Any pointers to this
--Keerthi

Hi Abhishek,
I tested from ID-Tools-Test configuration
Its stopping at the Interface Detarmination&Mapping step. Now the Base Runtime exception is gone. Geeting a new error"Messages in multi-message format can only be sent to one Adapter Engine".
According to the forum i've removed the Messages and Message 1 tag and tested.. But still the same error.
My scenario is File to IDOCs using multi -mapping. I've changes the occurece to unbounded.. Used Enhanced Receiver determination..All my configuration seems perfect Also in SXMB_MONI multiple messages as desired are present under 'Message Branch According to Receiver List'
But the error "Messages in multi-message format can only be sent to one Adapter Engine" is still there
--Keerthi

Error wile Outbinding of the message in multi mapping

HI
I have a scenario SIEBEL->XI->R/3
the data from siebel system is send through web services
in xi this data is mapped into 2 IDOCS using multi mapping .
I tested the scenario and i am getting the following error .
<b><SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Messages in multi-message format can only be sent to one Adapter Engine</SAP:Stack>
</b>
Can some one help with this issue
Thanks
Nikhil

Nikhil,
For IDOC bundling, take a look at this blog and note no : 814393.
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Regards,
Bhavesh

XI Configuration Design questions with multi-mapping message mapping object

Hello,
I'm having trouble designing a particular scenario for multi-mapping. Currently i'm working with a Vendor create and change. BPM is not being used.
This is what i need:
I need a CREMDM04 to turn into one or multiple ADRMAS/CREMAS IDocs and potentially a CLFMAS IDoc based on the values in the inbound CREMDM04 IDoc.
This is what i currently have:
A CREMDM04 inbound idoc is multi-mapped to a CREMDM03 (1...9999), another CREMDM03 (0...9999), and a CLFMAS01 (0...9999). At a minimum only the first CREMDM03 IDoc will be created and at a maximum all three will be created. The parameters on creating the second CREMDM03 IDoc and the CLFMAS01 IDoc are based on the values in the inbound CREMDM04 IDoc, whereas the first CREMDM03 IDoc will always be created and the values will just be converted/mapped from the inbound CREMDM04 IDoc. This multi-mapping is currently set-up via a graphical message map and works successfully in the test-tab of the mapping object. It has a main message and has sub-messages which are the IDocs. Im mapping the CREMDM04 to a CREMDM03 to then map it through an ABAP-Class and then to an XSL where the CREMDM03 inbound structure is expected to split into ADRMAS and CREMAS Outbound IDocs for Vendor Create/Change in the remote R/3 systems.
After the graphical map we have a necessary ABAP Class call that calls a BAPI to the remote system. This ABAP Class must come after the graphical map since the parameter for the BAPI is based on a converted value from the graphical multi-map.
After the ABAP Class call there is finally an XSL message split the CREMDM IDoc into an ADRMAS and CREMAS IDoc. There need to be two interface mappings (one per ADRMAS and CREMAS) since the ABAP classes and XSLs are specific to the ADRMAS and CREMAS.
The CLFMAS IDoc can go directly to the remote system, but since its within this one multi-map, Im not sure if is possible? Im not sure if it will fail once it tries entering the XSL mapping (this is the standard CREMDM message split offered from SAP).
There are three interface mapping scenarios I can think of, but cannot get to work:
CREMDM04 to ADRMAS02
CREMDM04 to CREMAS03
CREMDM04 to CLFMAS01
Currently I have the Interface Mapping structured as follows: (I cannot get this to activate as it appears it does not work)
Multi-Mapping ==> ABAP Class Call ==> Standard XSL Message Split
How should i design the interface mapping objects and the configuration objects for this scenario?
Any help is appreciated and I definitely will reward points (no need to include it in your response).

Hi,
I suggest you may use multiple steps interface mapping. It's composited with 3 message mappings as step by step.
Mapping 1: One to one mapping. For the output schema, use a composition schema which includes those 3 IDOCs you want.
Mappign 2: ABAP Mapping. I am not sure the ABAP class you mentioned is an ABAP mapping or not. If it does, That's ok. If not,
call that ABAP class in your ABAP mapping and do corresponding change for your message. Return back the same structure as output.
Mapping 3: One to multiple mapping to split the message.
So basically as interface mapping, it's one to multiple mapping. And internally, you have 3 steps to realize the mapping.
And as my experience, for both one to multiple message mapping & multiple steps interface mapping, it works well in my project. And
in ID, you have to configure it via "advance" function in receiver determination or interface determination.
Let me know if any confusion.
Thanks
Nick

IDoc Package to File using Multi Mapping urjent

Hi Experts,
I have a scenario where PI 7.1 need to receive IDocs in a package and should send three files to target system. I am using multi mapping concept here, where i have created one message mapping, one operation mapping with three interfaces specified in it. I am getting the error "Inbound interface found several times (for same sender and receiver) for the outbound interface" .

Hi,
Please make occurence of the message type in message mapping as 0..unbounded.
Also in operation mapping the occurence of inbound interface as 0..unbounded.
Also now in configuration-->interface determination... access the new operation mapping.... u will c the occurence as 0..unbounded. Refresh the cache ad execute it once more...
Let us know the result...
Babu
Edited by: hlbabu123 on Apr 3, 2010 1:16 PM

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
<i>CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only</i>
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

Multi-mapping for ibound IDOC

Hi! All
It would be of great help if you provide your suggestions on:
Mapping one XML source file to 6 IDOC receivers, 2 of them are of the same type and 4 are distinct idoc types.
I tried multi-mapping and received the following error:
"Messages in multi-message format can only be sent to one Adapter Engine"
Looks like IDOC adapter does not support multi mapping...
Can you please suggest any other option apart from using BPM(since it consumes lot of resources).
Thanks a lot!!
Regards,
Patrick

Hey
its not possible to do Multimapping over IDOC's without BPM.
other way around can be to do a single -single scenario,suppose u have 6 IDOC's to post then u need to design 6 different scenarios for them.
without BPM you cant do multimapping for IDOC or HTTP
Thanx
Aamir
Message was edited by:
Aamir Suhail

Multi-Mapping without BPM (Multiples IDoc To one EDI output?)

Hi all,
We are currently working for a client that want us to create, based on a multiple IDoc (an idoc that contains data of more than one idoc) only one output
Meaning that we have to do a mapping that based in this multiple input generates only one output that cointains all that data in only one flat file
example:
Idoc: PERX2002.PAYTEXT generates an EDI 820 with this structure:
LIST
/S_ISA (first input)
/S_ISA (second input)
At this moment we tried to use "Collect IDoc" option in SAP, and as seen in other blogs we changed the ocurrency of the message mapping to "0.unbounded", but when we release several idocs (WE14) we only get multiples output files (3 idoc collected and released give us 3 different edi files) instead only one edi file with all the data gathered together as ISA segments
In this required process possible???
Thanks in advance

As you can see in the following pics..
http://img201.imageshack.us/img201/8352/process1xz1.jpg
http://img244.imageshack.us/img244/4954/processvc9.jpg
i already made those changes, the multi-mapping is set, and also the option for collecting the IDocs and the "enhanced" option in the Integration Directory, but when i release all the idocs i still get multiple outputs (2 files), instead one file with all the gathered data
Could someone tell me if i'm missing some step?
Thanks for your time
Edited by: Alexis Alanis on Jan 7, 2008 7:24 PM

Multi Mapping - Receiver IDOC & Mail with BPM

Hi,
Is it possible to use BPM with Multi Mapping for IDOC & Mail receivers sent parallely..
Appreciate your help ..
Thanks,
vasanth.

Hi Michal,
Thanks Michal,
We are using PI 7.1, Our Scope to do File to IDOC & Mail scenario in between we have to do RFC Lookups..
Could you pls guide me thru the steps fo BPM,
1 SA -> OB to AA
2 ID -> OB to AA & AA to Recv
3.RD -> OB to AA & AA to Recv
4.RA -> AA to IB & AA to IB
Correct me if i'm wrong..
Clarification : Is there is any way out to implement this scenario with out BPM.
We already implemented this scenario with 2 MM & 2 OM, Scenario works fine...but we have to use 1 Mapping..
Appreciate your help in advance..
Thanks,
vasanth.

Multi Mapping without BPM (JMS 2 IDoc)

Hi,
i have a JMS-Query where it is necessary to map the given data to two different IDoc Types.
Therefore i have to mappings in two different namespaces. Is it possible to use these insde of the interface Mapping?! Or does the target types have to be in one mapping and one namespace?!
Can i use context objects?!
Please guide me! br, Jens

HI,
Ingeneral multi mapping in IM , we can use , to do it it should satisfies accordingly .. i mean see the below link
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Multiple message mappings in one integration scenario
With context object , we can route based on condition , this will be used in interface determination with condition , to this condition , we can use Context object, but it should be configured in MI.
Regards
Chilla

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022     Source = SI_file_split_out
u2022     Target = SI_file_split_in
u2022     Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022     Source system to BPM using interface SI_File_Abs_source
u2022     BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022     from source system to BPM
u2022     Sender interface: SI_File_Split_Out
u2022     Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022     Commu. Component: Source System
u2022     Using interface: SI_File_Abs_source
u2022     Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022     Sender Communication Component: BPM
u2022     Receiver Communication Component: Target System
u2022     Receiver Interface: SI_File_Split_In
u2022     Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
      Message1
           MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

Multi-Mapping in IDOC without using BPM ?

Hi ,
Please check ..
Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards
PS

Solved .. Thx every one .
Approache Used :
1. Created mapping with Change signature on target Message type(idoc) with 1..N Occurence.
2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

Multi mapping and File Content Conversion

Hi,
I've created a similar interface to the the one in this blog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
In the Config, I receive a CSV and use FCC in the File Adapter to build the XML file. Because of the multimapping, XI adds the following to my Message Mapping
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
Do I need to add this XML to the FCC??

No,you dont need to add extra tags.
Those tags are only for XI internal processing.
Thanx
Aamir

IDOC -- File (Multi-Mapping )

Similar Messages

Maybe you are looking for