IDOC filtering based on field

Hi all,
How to filter IDoc on the basis of field (Like if Bank id : SCB ) and then send to a file( save in local file)?

Hello,
Please refer to the below link it will help you.
Creating Idoc filter for MATMAS
BR,
Shweta

Similar Messages

Filter Idoc segment based on date in XSLT map

Hi,
In a Idoc to flat file XSLT mapping, I have a requirment to filter segment out of multiple segment occurance in HRMD_A idoc. Idoc has two date fields(actually string data, containing date in YYYYMMDD format) in the segment(end date and start date). I need to filter only one segment from multiple segments where current date falles within start and end dates (end date >= current date >= start date). Then map output fields from the filtered segment.
Its easy doing it in graphical mapping, but its difficult to use graphical mapping here as the message structure are enormous. I dont have much hands on in XSLT but think many of you have been through this kind of requirement using XSLT. So holding my hope high :). Please suggest a logic for this, will be highly appretiated.
Regards
Suman.

This functions will give you the current date:
fn:current-dateTime()     => Returns the current dateTime (with timezone)
fn:current-date()                 => Returns the current date (with timezone)
fn:current-time()                 => Returns the current time (with timezone)
To compare:
fn:compare(comp1,comp2)
fn:compare(comp1,comp2,collation)
=> Returns -1 if comp1 is less than comp2, 0 if comp1 is equal to comp2, or 1 if comp1 is greater than comp2 (according to the rules of the collation that is used)
Example: compare('ghi', 'ghi')
Result: 0
Also I suggest working with an IF condition like this:
<xsl:if test="price > 10">
        <tr>
          <td><xsl:value-of select="title"/></td>
          <td><xsl:value-of select="artist"/></td>
        </tr>
      </xsl:if>
Edited by: Kai Lerch-Baier on Apr 14, 2009 10:21 AM

Need to change the Idoc Status based on the Text in the Idoc

Hi All,
I have developed Idoc--SOAP Sync Process Scenario Using BPM and Works Perfectly.
I have used STATUS.SYSTAT01 Idoc to capture the Response that is comming from the Webservice.
I have mapped the response Text( Success or Fail) to one of the field in the Response Idoc, this is perfect.
Requirement:
1) If the Response Idoc Field receives Success Text means the Idoc Status shld be in Green Status.
2) If the Respnse Idoc Field Receives FAIL means the Idoc Status shld be in RED Status.
How can i Do this. please suggest me......
Regards

Hi Santhosh,
YES, I have to Capture the Response from Webservice in SAP R/3 by using STATUS.SYSTAT01 Idoc.
I have mapped the response from webservice to the one of the field in the Idoc.
If this field contains Success as text means the Idoc Status in We05 shld be 53 else it shld be 56
With out changing the FM code, can we use any other process to achieve this???
@ Mario
Can u please Allobarate your views more based on my requirement
Regards

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

Urgent - problem in idoc filtering

Hi Expert.
i have created my Extended idoc. for debmas06. its working fine but as i decleatred the filter in BD64 on field VKORG. Its not filtering on the value which i mention in this field.
I run the program with z- program and submitted into the BD12. from there it generate a idoc. but its not doing filtering. the filter field VKORG not exist in Zsegment that is only in standard segment.
I put those segment name in BD59 also and obhect is VKORG. still is doesn't work. any suggation abt this.
I assure i will rewarded to the appropriate answer.
Thanks

Hi!
Did I get this correct?
>
> The filter field VKORG not exist in Zsegment that is only in standard segment.
You Z-message does not contain VKORG? Then a filter for this field is not possible. You can only filter for fields included in the message. Otherwise your steps seem alright.
Regards,
Christian

IDoc number based upon sales data.

Hi Experts,
How to get the IDoc number in case I have sales document number or any other data which is being send in IDoc, any way we can get the IDoc number?
Also help me know the program to process the IDocs in background, I know the t.code bd87 is used to process the idocs, but how to process in background via a batch job.
thanx
Garima

Hi,
You may use t.code we09 to get the Idoc number based upon data,
you need to provide the information like Idoc basic type, date range etc to filter the data,
and under "Creteria for search in data records", provide the segment name, search in field and value against you are looking for a Idoc number.
Use following programs to process the IDocs in background:-
RSEOUT00 u2013 Process all selected IDocs (EDI)
RBDAPP01 u2013 Inbound Processing of IDocs Ready for Transfer
Some use full t.code for IDoc processing:-
WE60 u2013 IDoc documentation
BD87 u2013 Inbound IDoc reprocessing
BD88 u2013 Outbound IDoc reprocessing
BDM2 u2013 IDoc Trace
WE19- Testing IDoc.
regards
Vivek.

IDOC Filtering

Hi ,
I have a Requirement on the Field Level IDOC Filterring.
The Query Goes as Follows, this is and( OUTBOUND FLOW):
In the MATMAS IDOC, with Segment : E1MARCM, Filed PERKZ ='5', then this idoc should not trigger.
Please let me know is ther any Filtering where the PERKZ = 5 then the IDOC should not Trigger.
Note : I dont want to write any user exits or Program for this.
Thanks in Advance.
Regards,
Praveen Kalwa

Hi ,
I have a Requirement on the Field Level IDOC Filterring.
The Query Goes as Follows, this is and( OUTBOUND FLOW):
In the MATMAS IDOC, with Segment : E1MARCM, Filed PERKZ ='5', then this idoc should not trigger.
Please let me know is ther any Filtering where the PERKZ = 5 then the IDOC should not Trigger.
Note : I dont want to write any user exits or Program for this.
Thanks in Advance.
Regards,
Praveen Kalwa

Material Search based on field - Document in ECC 6.0

Hi All,
Need one help
In Material Master Basic Data 2, we have one field : Document under Drawing details.
In 4.6C, there was option to find list of materials based on field Document : inside Tab Material by Old Material Number
But on ECC 6.0 this field Document is not available in any of the search options.
I want to find all the materials against Document in ECC 6.0.
Please help me out on this.
Thanks in advance,
Regards,
Ravi Davda

HI Ravi,
May be some note to be updated , Check in OSS
Thanks
bala

How to create Formula based value field in COPA

Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh R

The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas

GR based IV field in PO

Hi,
We would like to make GR based IV field set as mandatory during PO create transaction.
Can we do this change at any time. Our company is using SAP since 2 years , now we want to make this field mandatory(default to check and display only).
How this will affect
1) Is this change apply for existing POs
2) Is this only applicable for new POs created after this change.
3) Is there any impact for the process
4) What are the precautions that need to take if we want to make this field as mandatory.
Please advise
Thanks
Udaya

Hi Udaya,
I would suggest you to post this question in the ECC section. PO creation is done in the ECC R/3 system.
Regarding PO GR based field. If you make it mandatory in ECC, it should only impact the new PO's. This is configuration setting which will be done by MM consultants. Consult your MM consultant.
Thanks
Srikanth

IDOC Number based on the output type

Hi,
I have a special requirement where in I need to find the IDOC number generated from the output type .
I have the NAST details and the Invoice number and need to find the IDOC generated for the particular NAST entry.
Is there any table or FM which gives this information in SAP.
Please let me know.
Regards
Praneeth

All,
Solved myself.
Used FM WFMC_PROTOCOL_GET to get the IDOC number based on the NAST value.
Regards
Praneeth

Jms message filtering with multiple fields

Hi
Can anybody please tell me how to do message filtering with multiple fields. i using jdeveloper11.1.1.4.0 , soa11g suite and weblogic 10.3.
previously i used JMSType property for one field filtering.
and is it possible to invoke jms adapter with our own properties (adding property to jms).
thanks,
Sourbh

thanks atheek
i worked with the same and it helped me a lot i can share one more link that will help.
http://forums.oracle.com/forums/thread.jspa?messageID=9650255&#9650255
Regards,
Sourbh.

Content filters based on Group Best Practice

What is best practice for Content filters based on Group.
What we wanna accomplish.
We have few groups but i'll make an example on two.
We have one group that have allowed "Media" and another group that have allowed "Exe".
What is best practice if one user is in both group.
How would you do Content filtering?
I dont see in Content filtering condition
if (Envelope Recipient does not mach group) then Block.
Is the best way to create first?
If (attachment.type="Media") then (insert header="sometext);
and after in Content filter below
if (Envelope Recipient) and (Header does not contain "sometext") then Block.

Hi,
I understand that I will have to use BPM. What is the best way?

Why do I have to select "continue allowing" every time I visit certain sites in order to be able to type into flash based form fields?

Why do I have to select "continue allowing" every time I visit certain sites in order to be able to type into flash based form fields?
See attached image for reference to what button I am referring to. Until i hit the "continue allowing" button I can not type into the form fields. I have tried removing and reinstalling flash. refreshing firefox, and clearing cache and cookies, and deleting the permissions.sqlite file. Nothing has worked. This issue just started happening a few days ago. Please let me know what I might be able to do to fix this.

That full page including the form is a Flash object.
I didn't see this doorhanger opening when I tried the URL in a new profile.
Did you previously created an exception or is the default selected if you check the permissions for the Flash plugin?
You can inspect and manage the permissions for the domain in the currently selected tab:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
You can go to the Permissions tab (Tools > Page Info > Permissions)
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

IDOC filtering for VLO2N PGI interface

Hello everyone,
we have an outbound interface online. An idoc is generated on PGI in VL02N (Interface ART_DVT).
We have another outbound interface which generates an IDOC for deliveries (Interface ART_OUT).
Both these interfaces update a table in a third party system.
As per my current requirement, the PGI interface should be triggered only for deliveries for which ART_OUT has been triggered.
The ART_DVT interface is being triggered via message control NACE.
Message Type : DELINF
Basic Type : DELVRY05
Whenever ART_OUT is triggered, a z-table gets updated in SAP with the necessary details.
I think I can check here before triggering the ART_DVT interface if i could use an user-exit in VL02N.
Any help is appreciated.
Thanks in advance.
Regards,
Xineohpi

Can someone atleast tell me if there is an user-exit or badi using which i can restrict the PGI idoc generation based on some check or if the message control execution part can be restricted..
in dire need of help......
Regards,
Xineohpi

IDOC filtering based on field

Similar Messages

Maybe you are looking for