Idoc( i have to generate two idoc

hi experts,
      i have to generate two idoc at a time from outbound .how is it possible.at that time whatever data i am sending should be same.please help me.
                                                                                thank you
with regards,
rohit

Hi Rohit,
It is not possible to generate two outbound IDocs at a time.
But you can resend/reprocess using standard program RSNAST00 for sales order/invoice/delivery IDoc for example.
What is the message type/IDoc type that you are dealing with?
Regards,
Ferry Lianto

Similar Messages

  • Reporting Services R2 log entries have stopped generating on report execution.

    Hi -
    I have a new instance of a reporting server and the log files have quit generating on report execution. 
    When the services restart this is the log file:
    rshost!rshost!8e8!01/22/2014-17:08:33:: i INFO: CLR runtime is initialized.
    rshost!rshost!8e8!01/22/2014-17:08:33:: i INFO: Derived memory configuration based on physical memory as 3931704 KB
    rshost!rshost!8e8!01/22/2014-17:08:33:: w WARN: Failed to initialize performance counters: ffffffff. Possible setup issue.
    rshost!rshost!8e8!01/22/2014-17:08:33:: e ERROR: Failed to start service, error=1063.
    We have logging turned on on the server.  Report Server Mode is Native.  Dont see anything in the application log about failed service.
    Any ideas?

    Hi dwrco,
    Have you recently install any update such as MS12-070 (KB2716440)? If so, it is a known issue for some patches for SQL Server. The reason is as follows:
    When a .NET application starts up, the .NET Framework tries to check if the Microsoft assemblies are right and have not been modified, this is done through connecting to a server that has a revocation list in internet. When the framework tries to connect
    to the server to check if it has access to internet with an elevated timeout, this makes that any other .NET application that has less timeout setting fails (such as SSIS or SSRS) with timeout error.
    For example, the error message "The request failed or the service did not respond in a timely fashion." means that the SSRS timeout is lower than the timeout of the connection to the revoke list server established by .NET Framework.
    To work around the issue, we usually use two approaches:
    Increase the value of ServicesPipeTimeout registry key of Reporting Services
    Disable generatePublisherEvidence element of ReportingServicesService.exe.config file
    For the detailed steps, please see:
    http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx 
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • Problems with EventSource generating two different types of event

    Hi everybody,
    i was trying to connect an EventSource (capable of generating two different event types: a MapEventType and a TupleEventType) to two CQL processors through two separate channels, each one dedicated to its event type:
    ASSEMBLY:
    <?xml version="1.0" encoding="UTF-8"?>
    <beans ....>
         <wlevs:event-type-repository>
              <wlevs:event-type type-name="testMapEvent">
                   <wlevs:metadata>
                        <entry key="message" value="java.lang.String"/>
                        <entry key="date" value="java.util.Date" />
                        <entry key="list" value="java.util.List" />                    
                   </wlevs:metadata>
              </wlevs:event-type>
              <wlevs:event-type type-name="testTupleEvent">
    <wlevs:properties>
    <wlevs:property name="t_message" type="char" length="4000" />
    <wlevs:property name="t_date" type="timestamp"/>
    <wlevs:property name="t_list" type="object"/>
    </wlevs:properties>
              </wlevs:event-type>
         </wlevs:event-type-repository>
         <wlevs:adapter id="input" class="com.bea.wlevs.adapter.example.types.TestAdapter">
         <wlevs:instance-property name="eventTypeName" value="testMapEvent"/>
         </wlevs:adapter>
         <bean id="output" class="com.bea.wlevs.example.types.TestOutputBean" />
    <wlevs:channel id="inputChannelTuple" event-type="testTupleEvent">
    <wlevs:listener ref="testProcessorTuple" />
    <wlevs:source ref="input" />
    </wlevs:channel>
         <wlevs:channel id="inputChannelMap" event-type="testMapEvent">
              <wlevs:listener ref="testProcessorMap" />
              <wlevs:source ref="input" />
         </wlevs:channel>
         <wlevs:processor id="testProcessorMap" />
    <wlevs:processor id="testProcessorTuple" />
         <wlevs:channel id="outputChannelMap" event-type="testMapEvent">
              <wlevs:listener ref="output" />
              <wlevs:source ref="testProcessorMap" />
         </wlevs:channel>
         <wlevs:channel id="outputChannelTuple" event-type="testTupleEvent">
              <wlevs:listener ref="output" />
              <wlevs:source ref="testProcessorTuple" />
         </wlevs:channel>
    </beans>
    JAVA:
    The com.bea.wlevs.adapter.example.types.TestAdapter class is a simple RunnableBean generating "testMapEvent"s like this:
    +public void run() {+
    +... bla bla bla ...+
    +while(true) {+
    Object event = createEvent();
    +if(event != null) {+
    eventSender.sendInsertEvent(event);
    +}+
    +}+
    +}+
    +private Object createEvent() {+
    Object obj = eventType.createEvent();
    EventProperty p;
    p = eventType.getProperty("message");
    p.setValue(obj, "Evento #" seqNum); // seqNum is a int+
    p = eventType.getProperty("date");
    p.setValue(obj, new Date());
    p = eventType.getProperty("list");
    p.setValue(obj, nipotini); // nipotini is a List<String>
    return obj;
    +}+
    CONFIG:
    +<?xml version="1.0" encoding="UTF-8"?>+
    +<n1:config xmlns:n1="http://www.bea.com/ns/wlevs/config/application">+
    +<processor>+
    +<name>testProcessorMap</name>+
    +<rules>+
    +<query id="testRuleMap">+
    +<![CDATA[ select message, date, list from inputChannelMap ]]>+
    +</query>+
    +</rules>+
    +</processor>+
    +<processor>+
    +<name>testProcessorTuple</name>+
    +<rules>+
    +<query id="testRuleTuple">+
    +<![CDATA[ select t_message, t_date, t_list from inputChannelTuple ]]>+
    +</query>+
    +</rules>+
    +</processor>+
    +</n1:config>+
    Seems like the events cannot make it beyond the CQL processors:
    +<15-dic-2010 20.11.34 CET> <Error> <CQLProcessor> <BEA-000000> <Failed to set property [t_message] of event type [testTu+
    +pleEvent]. Cause = [t_message] is not a property of event type [testMapEvent]>+
    +<15-dic-2010 20.11.34 CET> <Warning> <Ede> <BEA-000000> <Exception for 'testMapEvent{message=Evento #14, list=[QUI, QUO,+
    +QUA], date=Wed Dec 15 20:11:34 CET 2010}' raised by listener = com.oracle.cep.processor.cql.impl.CQLEventReceiver@aa882+
    +7+
    +com.bea.wlevs.ede.api.EventProcessingException: Internal error processing event [testMapEvent{message=Evento #14, list=[+
    +QUI, QUO, QUA], date=Wed Dec 15 20:11:34 CET 2010}] = Failed to set property [t_message] of event type [testTupleEvent].+
    +Cause = [t_message] is not a property of event type [testMapEvent]+
    at com.oracle.cep.processor.cql.impl.CQLEventReceiver.sendToEngine(CQLEventReceiver.java:389)
    at com.oracle.cep.processor.cql.impl.CQLEventReceiver.onInsertEvent(CQLEventReceiver.java:248)
    at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEventToListener(EventSenderImpl.java:360)
    at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEvent(EventSenderImpl.java:331)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.eventstore.recplay.RecordPlaySendEventInterceptor.sendInsertEvent(RecordPlaySendEventIntercepto
    r.java:159)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.eventinspector.EventInspectInterceptor.sendInsertEvent(EventInspectInterceptor.java:132)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.monitor.internal.MonitorSendEventInterceptor.sendInsertEvent(MonitorSendEventInterceptor.java:4
    +79)+
    at com.bea.wlevs.channel.impl.ChannelImpl.onInsertEvent(ChannelImpl.java:439)
    at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEventToListener(EventSenderImpl.java:360)
    at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEvent(EventSenderImpl.java:331)
    at com.bea.wlevs.ede.impl.EventSourceEventSenderImpl.sendInsertEvent(EventSourceEventSenderImpl.java:85)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.eventstore.recplay.RecordPlaySendEventInterceptor.sendInsertEvent(RecordPlaySendEventIntercepto
    r.java:159)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.eventinspector.EventInspectInterceptor.sendInsertEvent(EventInspectInterceptor.java:132)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.monitor.internal.MonitorSendEventInterceptor.sendInsertEvent(MonitorSendEventInterceptor.java:4
    +79)+
    at com.bea.wlevs.adapter.example.types.TestAdapter.run(TestAdapter.java:33)
    at com.bea.wlevs.adapter.example.types.TestAdapter$$FastClassByCGLIB$$89b675c7.invoke(<generated>)
    at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:149)
    at org.springframework.aop.framework.Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:70
    +0)+
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.wlevs.ede.impl.EventManagerAccessorProxy.invoke(EventManagerAccessorProxy.java:30)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.wlevs.ede.impl.EventBeanProxy.invoke(EventBeanProxy.java:38)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:635)
    at com.bea.wlevs.adapter.example.types.TestAdapter$$EnhancerByCGLIB$$16190560.run(<generated>)
    at com.bea.wlevs.spring.RunnableBeanPostProcessor$RunnableWrapper.run(RunnableBeanPostProcessor.java:117)
    at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:196)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    +Caused By: com.bea.wlevs.ede.api.EventPropertyException: Failed to set property [t_message] of event type [testTupleEven+
    +t]. Cause = [t_message] is not a property of event type [testMapEvent]+
    at com.oracle.cep.processor.cql.impl.TupleValueUtils.raiseEventPropertyException(TupleValueUtils.java:153)
    at com.oracle.cep.processor.cql.impl.TupleValueUtils.projectEvent(TupleValueUtils.java:90)
    at com.oracle.cep.processor.cql.impl.TupleValueUtils.compareAndProjectEvent(TupleValueUtils.java:48)
    at com.oracle.cep.processor.cql.impl.CQLEventReceiver.sendToEngine(CQLEventReceiver.java:337)
    at com.oracle.cep.processor.cql.impl.CQLEventReceiver.onInsertEvent(CQLEventReceiver.java:248)
    at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEventToListener(EventSenderImpl.java:360)
    at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEvent(EventSenderImpl.java:331)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.eventstore.recplay.RecordPlaySendEventInterceptor.sendInsertEvent(RecordPlaySendEventIntercepto
    r.java:159)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.eventinspector.EventInspectInterceptor.sendInsertEvent(EventInspectInterceptor.java:132)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.monitor.internal.MonitorSendEventInterceptor.sendInsertEvent(MonitorSendEventInterceptor.java:4
    +79)+
    at com.bea.wlevs.channel.impl.ChannelImpl.onInsertEvent(ChannelImpl.java:439)
    at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEventToListener(EventSenderImpl.java:360)
    at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEvent(EventSenderImpl.java:331)
    at com.bea.wlevs.ede.impl.EventSourceEventSenderImpl.sendInsertEvent(EventSourceEventSenderImpl.java:85)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.eventstore.recplay.RecordPlaySendEventInterceptor.sendInsertEvent(RecordPlaySendEventIntercepto
    r.java:159)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.eventinspector.EventInspectInterceptor.sendInsertEvent(EventInspectInterceptor.java:132)
    at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
    at com.bea.wlevs.monitor.internal.MonitorSendEventInterceptor.sendInsertEvent(MonitorSendEventInterceptor.java:4
    +79)+
    at com.bea.wlevs.adapter.example.types.TestAdapter.run(TestAdapter.java:33)
    at com.bea.wlevs.adapter.example.types.TestAdapter$$FastClassByCGLIB$$89b675c7.invoke(<generated>)
    at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:149)
    at org.springframework.aop.framework.Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:70
    +0)+
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.wlevs.ede.impl.EventManagerAccessorProxy.invoke(EventManagerAccessorProxy.java:30)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.wlevs.ede.impl.EventBeanProxy.invoke(EventBeanProxy.java:38)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:635)
    at com.bea.wlevs.adapter.example.types.TestAdapter$$EnhancerByCGLIB$$16190560.run(<generated>)
    at com.bea.wlevs.spring.RunnableBeanPostProcessor$RunnableWrapper.run(RunnableBeanPostProcessor.java:117)
    at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:196)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    +>+
    Can anybody help me figuring out what's wrong?
    Thank you in advance!

    Hello Chris,
    Wondering if you've found a solution for this.
    I was thinking you could make a web app that used the jQuery dialog, then let the client just put an individual web app item on the home page when they want to have the pop up.
    This way it is more like one type of modal window and the client can show whatever they want when they want, and turn it off by removing the module.
    You can place the module inside a content holder so they do not mess up any template or page content.
    Hope this helps,
    Chad Smith | http://bcgurus.com/Business-Catalyst-Templates for only $7

  • I am using an NI PCI 6024 E board device for an analog output application. Can I generate two independent waveforms, one on each analog output channel?

    I am using an NI PCI 6024 E board device for an analog output application. Can I generate two independent waveforms, one on each analog output channel? In attach I send a example of my vi to control one chanel, but i need to control both but with diferent waveforms.
    Is the vi correctly programed to this propose?

    Yes you should be able to do that. look at the signal generation examples shipped with LabView
    You can create a 2 D array, with each row representing a wave form per channel. The number of points of the wave form (per row of the 2 D array) represent the number of points in the output buffer
    The wave forms can have different amplitudes/shapes, and therefore they are independent in this sense.
    However, you need to set the update rate,which is the same for both channels. The update rate together with number of points per buffer determines the frequency of the wave forms. This means the two wave forms will have the same frequency.
    To have different frequencies, you need to have say, on wave form with one cycle per buffer, and the other waveform have 2 cycles
    per buffer. in a case like that the frequency of the second channels is twice that of the first channel, and so on
    The two wave forms are then not truly independent, they may have different amplitudtes/shapes, but related in frequency.

  • Generate two xml reports from same execution

    I need to generate a summary report and detail report from the same execution.
    Detail report will record all the steps marked as Record result
    Summary report to record only the steps that are of type Pass/Fail, Numeric Limit Test, MultiNumeric Limit Test and String test.
    So far I have been able to generate two detail report from same execution and can save each report in separate folder.
    How to get the data for summary versus detail report from the running sequence?
    CLD,CTD
    Solved!
    Go to Solution.
    Attachments:
    ReportFolders.JPG ‏115 KB

    Thanks for the approach. 
    I have created a sequence which recursively looks through the Parameters.MainSequenceResults and if StepType is one of the Test Types then displays in summary report. 
    On the summary report I also wanted to get the name of the subsequcenCall if that subsequence call contained a valid TestType for summary report. For example if subsequenceCall step has a Action and String type. I wanted it to display as shown in Image1.jpg below. Currently it displays as shown in Image2.jpg.
    Attached is the recursive sequence that I am using. 
    CLD,CTD
    Attachments:
    GenerateSummaryReport.seq ‏8 KB
    Image1.jpg ‏35 KB
    Image2.JPG ‏140 KB

  • Can i generate two sinus to delay in phase in continue with the ni 6052E PCI

    I want use the daq ni 6052 E in sinus generator
    Channel 1 sin(x)
    Channel 2 sin(x+pi/4)
    continus generation without hole
    How must I do
    do it exist a VI
    can you send me
    Thank you

    Greetings,
    Below is a link to a LabVIEW example that should accomplish the task you have described:
    Generating Sine Waves Continuously on Two Analog Output Channels
    Good luck with your application.
    Spencer S.

  • Generate two different pulses or more continuous​ly with a PCI -6602

    I have a PCI-6602 and Labview 8.0. I need to create a complex wavefrom output  and I don't know how to create this waveform with the 6602, I know that I can create this pulse format by using the Agilent Pulse Generator  but I would like to use the National Instruments. If somebody has an idea about how many counters and the physical connections that I need, also about how can I use labview to generate a complex waveform output.
    I've attached the waveform that I need to generate continously and I hope that I can use the PCI-6602 for this purpose.
    Attachments:
    Pulse format.doc ‏24 KB

    This is a duplicate post, for the main post please see:
    NI Discussion Forums: How to generate two diferent pulses and re-trigger such pulses continously
    Regards,
    Dan King

  • How do I generate two finite pulse trains using counters on PXI-6251

    I'm trying to use Counter 0 and Counter 1 on the PXI-6251 to generate two finite pulse trains.  But, I get this error:   "The specified resource is reserved. The operation could not be completed as specified."  See attached example.
    Inside the disabled box is what I'd like to run on both counters.  I stripped things down to creating the task, starting, and stopping.  I then started to add things to see what my problem was.  The timing VI seems to be what causes me issues but I don't know why. 
    My end objective is two identical pulse trains with one delayed by 5us, which I figured would be easy to do in the initial delay.  I tried both in a single task and as separate tasks with no avail.
    Attachments:
    2_counter_outputs.vi ‏32 KB

    Hi SirMutt,
    Creating a finite pulse train requires
    two counters. What’s really happening is that one counter is creating a
    continuous pulse train while the other counter applies a finite pulse to “window”
    the pulse.
    What you want to do is correlated DIO. I’ve
    done a search on our website for “correlated DIO” and have come up with a few
    resources. Hopefully that will help you get started.
    Digital Output and Pulse Generation
    Performing Correlated Digital IO with an M Series Device in LabVIEW
    M Series Hardware-Time DIO with Counter Clock Generation
    Mark E.
    Precision DC Product Support Engineer
    National Instruments
    Digital Multimeters (DMMs) and LCR Meters
    Programmable Power Supplies and Source Measure Units

  • VF11- It's generating two documents

    Hi Guru's
    When I am creating cancel invoice with VF11 it's generating two accounting documents, one related to credit memo another one it's getting automatically that is excise accounting document, but i canceled excise invoice with using J1IH before doing VF11 transaction. but GL it's showing two accounting documents related to excise. Please help me where I have to control this settings.
    regards
    dnr

    This is standard behaviour of SAP when you commercial invoice, it will create 2 accounting entries even though it had made an accounting document when you cancel the excise Invoice thr J1iH.
    There are 2 possible solution for this issue.
    Now pass an entry directly in Fi for the excess accounting document generated,.
    Secondly SAP has released a note which prevent the creation of 2 accounting document.
    You can search for that note , or else i will let you know the note number by 2mmrow.
    Regards
    Prashant

  • Generat two signals at the same time and reading voltage

    Hii
    i have try to generate two signals at the same time and read voltage from another port on the board(not have to be at the same time), i have not alot of expriens in labview
    and i based my code of example(http://zone.ni.com/devzone/cda/epd/p/id/5197) from yours site and try to suit to my needs
    now my problem is when i generat the 2 signals(that work perfect) i canot read voltage from another port on my CB-68LP
    i can not find the problem  and make it over i hope there is away to figer out and fix it.
    i have two cards 6229, and two CB-68LP board.
    labview 8.5.
    my code is look like this - http://img142.imageshack.us/my.php?image=scrennshot2no2.png
    (this works perfect).
    and this is my code after suit to my need - http://img183.imageshack.us/my.php?image=scrennshotfl5.png,there is  error exception at  the right side.
    the exception-
    Possible reason(s):
    Specified route cannot be satisfied, because it requires resources that are currently in use by another route.
    Property: RefClk.Src
    Source Device: Dev1
    Source Terminal: 10MHzRefClock
    Required Resources in Use by
    Task Name: _unnamedTask<0>
    Source Device: Dev1
    Source Terminal: None
    Destination Device: Dev1
    Destination Terminal: RefClock
    Task Name: _unnamedTask<1>
    eyal

    sorry...
    The AO tasks is very important they will be synchronize ,it is very importent the two tasks will start at the same time
    and after it run at synchronize mode i will need to make reading of voltage
    i gust try to make simulation of machin (i give that machin AO and reading from it voltage that all)
    first of all i make the two signals(synchronize signals).
    and after it i will need to reading voltage.
    i can make two signals synchronize together.
    i can make reading voltage
    but i can't make two signals synchronize together with reading voltage
    it throw to me this error message.
    i am looking for away to figer this out.
    thank's for any help 
    eyal
    Attachments:
    test11.vi ‏130 KB

  • I seem to have at least two, and maybe four, iCloud accounts, across my iPhone, my iPad and my MacBook Pro. Can I combine them into one iCloud account?

    I seem to have at least two, and maybe four, iCloud accounts, across my iPhone, my iPad and my MacBook Pro. Can I combine them into one iCloud account? I have been able to log into what appears to be three of the four iCloud accounts I have. Two of them seem to be remarkably similar, and one appears to be only for my MacBook.I think I know which one my iPhone is backing up to, as I successfully restored from a back-up last week. The fourth iCloud account I can't access via password or security questions. Any advice would be much appreciated.
    Thanks.
    Cheers,
    Aaron
    Melbourne, Australia

    You cannot merge accounts.

  • TS3899 I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) acco

    I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) account. I get the error message "A copy has been placed in your Outbox. The sender address "name"@tiscali.co.uk was rejected by the server".

    Hi apmichael,
    If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Regards,
    - Brenden

  • How can I Generate two different reports from single execution of Test cases in NI teststand

    Hi,
    My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
    Solved!
    Go to Solution.

    Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
    The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property. 
    Also, be aware that step's post-expression is not executed in case of error in the step.
    Sergey Kolbunov
    CLA, CTD
    Attachments:
    SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

  • I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??

    I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??
    And is there any way to sync all my purchases and accounts to just have one... It is a bit stupid that you dont even get a list of something of what account you may of used, or some kind of hint, so you could log on to the right account. I am really stuck ...
    Please Advise......

    You can't merge accounts. But you can check your purchase history:
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers
              http://support.apple.com/kb/HT2727
    Also, what may seem stupid to you... may be a protection of privacy to others.

  • I buy all of our movies on our apple TV that is associated with my apple ID. I want to put a movie on my wife's new iPad but it gives me a 90 day warning that she won't be able to download anything. Do we really have to buy two copies of the same movie?

    I buy all of our movies on our apple TV that is associated with my apple ID. I want to put a movie on my wife's new iPad but it gives me a 90 day warning that she won't be able to download anything. Do we really have to buy two copies of the same movie? There has to be a way for one family to share movies on all of our devices.

    Ahh, thank you! What a pain in the neck. I figure I must have been signed into his account at some other point in time, maybe after... watching a movie..? [Though, that'd be the iTunes store, right? Not the App Store.] Anyway, some situation must've occured where I absentmindedly updated and iPhoto is now tied up with his account.
    I'll go ahead and contact support to see if they can get me sorted. I suppose I can just ask him for his password, but.. oh, you know, it's a temporary solution and I guess I was just hoping to easily get iPhoto properly associated with myself again. Thank you!

Maybe you are looking for

  • Free goods cost

    Hello experts, If the cost of free goods is not transferred to ordered goods (i.e. saleable goods), how to settle the cost of free goods? For e.g. buy 10 pc of A then get extra 1 pc of A. This extra 1 pc of A is free of charge. When post goods issue

  • How do you put a back up system on a firewire external drive?

    I was taking my new MacBook in to the genius bar to diagnose a possible defective USB port. I wanted to clone the entire hard drive to an external drive for a backup. To do that, one must start up from the external drive. I tried to install a startup

  • Can we connect from Portal to MaxDB with the trial version of SAPNetWeaver?

    I’ve installed SAP NetWeaver Developer Workplace SR2 (trial version) with the following components: •     SAP Web Application Server Java 7.00 (J2EE Engine) •     MaxDB 7.6.00.34 database + Database Manager and SQL Studio •     SAP Enterprise Portal

  • Post extra goods recieved with 501 movement type

    Hello experts, I have a requirement that after PO, at the time of MIGO if extra quantity is received from vendor then that extra quantity should automatically get posted in background with movement type 501 and the actual quantity will work as normal

  • What class needs to be imported when you use loadVars?

    Does anyone know what class you need to import to get this working? var my_lv:LoadVars = new LoadVars(); my_lv.onData = function(src:String) { if (src == undefined) { trace("Error loading content."); return; content_ta.text = src; my_lv.load("content