IDOC reprocessing including conversion rules

with BD87 you can reprocess a IDOC, which was not properly processed because of any reasons.
For me it looks like that using BD87 conversion rules maintained for the IDOC message type are not reprocessed again. Is there any way to force the system to include the processing of conversion rules in the reprocess step.
Thanks for any help
Marita

Hi Marita,
Have you tried with the application RBDMANI2
Shylesh

Similar Messages

IDOC reprocessing with new conversion rules

Hi All,
we've created IDOCs and after the creation the conversion rules are changed. Now we want to reprocess the IDOC's and in the reprocessing we want to use the new conversion rules.
I've tried just reprocessing, I also tried WE19, but with these 2 the conversion rules seem to left untouched.
Has anyone a solution were I can reprocess making use of the new rules?
kind regards,
Pieter

Hi,
I've debugged the reprocessing of the idoc and it seems indeed I had to change the status, however not all statusses result in reprocessing of the rules. Status '29' Error in ALE Service works. So my problem is solved.
Thank you.
kind regards,
Pieter

Data records in an IDoc getting erased, when conversion rules are defined

Hello ,
We are sending IDocs of message type GLMAST & COELEM from a system(version 4.7) to another system (version 4.6B).
The segment data in the IDocs are changed using the user exit enhancement KKCD0001. The function exits used are EXIT_SAPFKCIM_001 and EXIT_SAPFKCIM_002.
If there is no conversion rule defined in the receiver system, for the segments, the IDocs are posted correctly in the receiving system. But if we define conversion rules , then the data records for all the segments for which conversion rule is defined are getting erased, and an error occurs during processing of IDocs
Please let me know what can be the the reason behind this issue..And how to solve this..
Thanks in advance,
Afsar

Issue solved

IDOC inbound conversion Rules

Hi to all,
I'm Implementing an Inbound Interface for Cost Centers using idoc message COSMAS and IDOC type COSMAS01.
I want to modify IDOC data changing the cost center code by another one stored locally in a param table (Z*).
I think the best way to do this is by creating a conversion rule in BD72 than maintain and assign to Message type. The problem is that i have to select data from the Z* Table i need two parameters from the IDOC(LogicalSystem and cost center). How can I create a custom conversion routine or something to get this data from the Z table into the IDOC field (KOSTL).
The conversion exits only have one import parameter and one export parameter.
Do anyone had one problem like this?
Thanks in advance to all.

Hi,
Please check the documentation in WE60 tcode and see if the fields are required to be passed...
Regards,
Nagaraj

Can we write code using BD79(ALE IDoc Conversion Rule)

Hi -
I had created a conversion rule that specifies for the field account group (KTOKD) on KNA1: I need to include the following logic :
if the customer number (KNA1-KUNNR) is in the range 0010000000-0019999999 or 0140000000 to 0149999999, then change the account group value to u201CSKIPu201D.
So I had created a conversion rule using BD62.
In BD79, I had set the constant to SKIP.
But where to include the following logic :
if the customer number (KNA1-KUNNR) is in the range 0010000000-0019999999 or 0140000000 to 0149999999, then change the account group value to u201CSKIPu201D.
Thanks,
Gyanaraj

Hi Shital ,
Thank U very much for replying to my question.
But when I m trying to create the same , by clicking Use general rule & specifying special conversion routine ZBLNK , it is throwing the following error "Conversion exit ZBLNK does not exist".
Please can u help me out.
Thanks,
Gyanaraj

ALE IDoc Conversion Rule or BADI

Hi,
I'm new to ALE IDoc. I have a requirement to hide some sensitive data field for the HR information when outbound the Idoc.
Example, I need to outbound the IT8 Basic Pay with payscale area etc but not with the basic pay amount. I can convert the basic pay amount to zero when the idoc is being created.
I've searched through some information and found out that there are several ways to achieve it. However, I'm not sure which one is a better way.
Is it using the Conversion Rule (BD62) or using Badi or Idoc Reduction method is better?
Kindly give me some hints as I'm very confuse of which one is the better solution.
Many thanks in advance.

No user exit is needed for conversion rule.
However, you should remember that conversion rules are applied segment fields for a particular message type. So wherever the IDoc message type is used the rule will be applied. If you want to associate the rule for any other condition in addition to message type better to go with a BADI
These are steps to create and apply a conversion rule to a message type:
1. Transaction BD62 - Create conversion rule and assign it to a IDoc segment
2. Transaction BD79 - Define the conversion rule by selecting your field and clicking display button. Once inside you can use various options like set constant to map 0 to the basic pay
3. Finally assign the conversion rule to your message type using BD55
As for BADIs, IDOC_DATA_MAPPER is also suited for your requirement, the method PROCESS, allows you to manipulate your IDoc fields whichever way you want. You get the control record, data records, using which you can restrict your manipulation to specific message type or other conditions
To above post, BADI IDOC_CREATION_CHECK should not be used for mappings/conversions as its specific purpose is to stop creation of an IDoc under required conditions

Reduced message type - Idoc without conversion rules

Hi Friends,
Am facing a strange situation while converting the Material Master data from 4.7b to ECC using BD21 transaction with reduced custom message type. I have reduced the standard msg type MATMAS05 using BD53 for the required field mapping both systems and I written the code using the exit EXIT_SAPLMV01_002 based on client req.
The situation is that sometimes IDocs are failing and the error shows that some fields which I have not selected in E1MARAM segment of the reduced msg type are populated with some values(ex: zeroes-0, slash-/,spaces)
Note: Conversion rules are not needed for this scenario.
Please help me out how to get rid of this '/ ' or spaces which appear for unselected fields in outbound Idoc using reduced message type ?
Thanks
Saravanan

Hi,
Please check the documentation in WE60 tcode and see if the fields are required to be passed...
Regards,
Nagaraj

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

Conversion rule in ALE/IDocs

Hi,
   I have a requirement to make use of conversion rules in ALE/IDocs.
   For a particular field, I need to concatenate the values of two other fields in the IDOC segment
   and populate the value. The other direct options like setting a constant or changing a field's value
   work fine.
   But I was not able to figure out how to implement this option. Does anyone have an idea?
Regards,
Sudeep

Hi sudeep
Could you let me know the exact steps you did to create the conversion rule for idocs.
Thanks in Advance

Idoc Conversion rule, Change pointers and Filters

Hi Experts,
Please any one can help me out, i need material or clear picture about Idoc Conversion rule, Change pointers and Filters where we can use these concepts what is the befit for these concepts.
Thanks in advance,
Ramesh.

Hi,
Check this link. It has got some of the tutorials you are looking for.
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Cheers
VJ

BD79 Idoc Conversion Rule

Hi,
I have a requirement where I have a Inbound Idoc which has two segments say E1EDP03 and E1EDP20. Both are date fields.
now I want to map date from E1EDP03 if Qualif is Z01 to E1EDP20 using conversion rule.
E1EDP03 (Qualif. Z01) - DATUM -
>>> E1EDP20-EDATU
Is it possible to do this using conversion rule?
Thanks,

Hi Shital ,
Thank U very much for replying to my question.
But when I m trying to create the same , by clicking Use general rule & specifying special conversion routine ZBLNK , it is throwing the following error "Conversion exit ZBLNK does not exist".
Please can u help me out.
Thanks,
Gyanaraj

Idoc conversion rule

Hi,
What is idoc conversion rule? Why we need this?
While upgrading from 4.7 to ECC 6.0 what all precautions need to be taken for the existing standard idocs and custom idocs in the system.
Thanks & Regards,
Soumya.

Hi,
ALE allows the user to perform an SAP transaction in the sending system, after-which the following steps occur:
1 or more communication IDocs (intermediate documents: container for the application data) are created in the sending system database. An ALE distribution model, that needs to have been configured, determines which systems the IDocs are to be sent
These communication IDocs, that contain the relevant application data of the transaction that was performed, are then passed to the ALE communication layer
This layer performs an RFC call, using the port definition and an RFC destination determined through the customer model
The IDocs are then transferred to the respective receiving systems. These could be SAP R/3, R/2 or external systems
If the receiving system is an SAP system then:
In the case of master data distribution the same transaction that was performed on the sending system is again performed on the receiving system with the data contained in the IDoc. This allows the data to go through the SAP checks before posting occurs
In the case of transaction scenarios the relevant data is passed to the respective transactions in order to load the required application document. Eg. A PO is loaded on the sending side, yet a SO is created on the receiving system
Master data has another difference:
It can be set up in such a way that any changes made to specific fields in master data tables can automatically trigger off the ALE distribution process for that particular master data object
If a master data object is created or changed on a sending system and distributed to another system the respective transaction is used to either create or change that respective master data object on the receiving system
In general, if standard SAP can't perform the task required then neither can ALE. It doesn't add functionality, it merely decouples it and allows you to distribute it onto other remote systems.
The Detail as described by SAP
In the output processing one of the function modules of the application creates an IDoc, the so-called master IDoc. This IDoc is sent to the ALE layer where the following processing steps are applied:
Outbound processing
Receiver determination
An IDoc is similar to a normal letter in that it has a sender and a receiver. If the receiver has not been explicitly identified by the application, then the ALE layer uses the customer distribution model to help determine the receivers for the message.
The ALE layer can find out from the model whether any distributed systems should receive the message and, if so, then how many. The result may be that one, several or no receivers at all are found.
For each of the distributed systems that have been ascertained to be receiver systems, the data that is specified by the filter objects in the customer distribution model is selected from the master IDoc. This data is then used to fill an IDoc, and the appropriate system is entered as receiver.
Data selection
Segment filtering
Individual segments can be deleted from the IDoc before dispatch by selecting Functions for the IDoc processing -> Settings for filtering in ALE Customizing. The appropriate setting depends on the sending and receiving logical R/3 System.
Field conversion
Receiver-specific field conversions are defined under Functions for the IDoc processing -> Conversions.
General rules can be specified for field conversions; these are important for converting data fields to exchange information between R/2 and R/3 Systems. For example, the field "plant" can be converted from a 2-character field to a 4-character field.
The conversion is done using general EIS conversion tools (Executive Information System).
Version change
SAP ensures that ALE functions between different R/3 System releases. By changing the IDoc format you can convert message types of different R/3 releases. SAP Development use the following rules when converting existing message types:
Fields may be appended to a segment type;
Segments can be added;
ALE Customizing keeps a record of which version of each message type is in use for each receiver. The correct version of the communication IDoc is created in the ALE output.
The resulting IDocs (it is possible that several IDocs could be created in the receiver determination) are referred to as communication IDocs and are stored in the database. The dispatch control then decides which of these IDocs should be sent immediately. These are passed to the communications layer and are sent either using the transactional Remote Function Call (RFC) or via file interfaces (e.g. for EDI).
If an error occurs in the ALE layer, the IDoc containing the error is stored and a workflow is created. The ALE administrator can use this workflow to process the error.
Inbound processing
After an IDoc has been successfully transmitted to another system, inbound processing is carried out in the receiver system, involving the following steps in the ALE layer:
Segment filtering
Segment filtering functions the same way in inbound processing as in outbound processing.
Field conversion
Specific field conversions are defined in ALE Customizing.
The conversion itself is performed using general conversion tools from the EIS area (Executive Information System).
Generalized rules can be defined. The ALE implementation guide describes how the conversion rules can be specified.
One set of rules is created for each IDoc segment and rules are defined for each segment field.
The rules for converting data fields from an R/2-specific format to an R/3 format can be defined in this way. An example of this R/2 - R/3 conversion is the conversion of the plant field from a 2 character field to a 4 character field.
Data transfer to the application
Input control
When the IDocs have been written to the database, they can be imported by the receiver application.
IDocs can be passed to the application either immediately on arrival or can follow in batch.
You can post an inbound IDoc in three ways:
by calling a function module directly: A function is called that imports the IDoc directly. An error workflow will be started only if an error occurs.
by starting a SAP Business Workflow. A workflow is the sequence of steps to post an IDoc.
by starting a work item A single step performs the IDoc posting.
The standard inbound processing setting is that ALE calls a function module directly. For information about SAP Business Workflow alternatives refer to the online help for ALE programming.

Idoc Conversion Rules

Hi all,
Good Morning Friends. I am looking for proper documentation which can help me to understand the concept of <b>Idoc conversion rules</b>. I search a lot in help.sap.com and also google resources, but couldn't figure out any. I am very much interested in comprehending this concept from quite a long time. Can anyone help me to find out good doc's on this concept. If you have any documents you can plz forward them to <b>[email protected]</b>.
Any kind of help will be appreciated and will be awarded points without failing.
Have a nice day !!
Thanks and Regards,
Varun.

HI Ferry LIanto,
Thanks for your immediate reply. I have gone through this. I also want to learn the theoritical aspects behind this concept. Is there any documentation available in help.sap.com regarding this or are there any other resources available to learn this very much in detail ? I have tried rigorously, but couldnt trace any. If possible can you please help me in this regard ?
Thanks and Regards,
Varun.
Message was edited by: varun sonu

IDOC to EDI Conversion

Hi, I am New to EDI-IDocs,We have a requirement over here to send the iDocs from SAP to Non-SAP sys(JCAPS).
Need step-by-step details to convert the iDoc to EDI format.
Helpfull Answers will b Rewarded.
Regards
Giridhar Reddy

Hi,
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
u2022 Create a Customer Distribution Model (CDM);
u2022 Add appropriate message types and filters to the CDM;
u2022 Generate outbound partner profiles;
u2022 Distribute the CDM to the receiving systems; and
u2022 Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC u2013 Creating IDoc Type from Change Pointers
RSEOUT00 u2013 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
There are two filtering in IDoc.
Segment Filtering:
Segment filtering can be achieved using T/Code BD56. Here you can suppress a whole segment irrespective of data inside it . You have to give Message Type / Sender Prrtner / Receiver Partner.
Data Filtering:
Data filtering can be done in dustribution model (BD64) where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Please check this link for more information.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Regards,
Shiva Kumar

Conversion rule executed in sender and receiver system?

Hello experts,
I want to send an Idoc from one SAP system to another.
Both systems are in the same transport line.
In the sender system I want to execute a field conversion. There
Therefore I maintained BD62 (Define Conversion Rule), BD55 (activate Conversion Rule for Sender/Receiver combination) and BD79 (Specifie Conversion).
The mapping works perfectly.
The creation of the IDoc and the field conversion work perfectly.
But I get an error in the receiver system.
It seems that this system also tries to execute the fieldmapping, because it has the same BD55 (sender/receiver) settings.
The conversion rule itself does not exist in the receiver system, as these settings are not contained in a transport request.
What is the correct way? Can I customize BD55 not to generate a transport request and maintain this setting only in the relevant system?
Or do I need to maintain BD79 and BD62 also manually in the receiver system?
any hints
Barbara

Hi Barbara,
you have to maintain BD79 and BD62 manually in all receiver Systems.
Kind regards
Werner

IDOC reprocessing including conversion rules

Similar Messages

Maybe you are looking for