Idoc Retrigger

Hi,
I have one billing idoc with status 03 which is not having UOM picked up and thus failed in recepient's system. I want this Idoc to retrigger after adding an existing segment having relevent UOM. Kindly advice how to do that.

Hi,
If the status of the IDOC is "03" and if you want to make changes to the existing IDOC,double click on the segment that you want to change.
Click on Data Record(In menu bar)-->(Display->Change).
Enter the values that you want to change.
Save.
Status will be chnaged to "32".
Goto the T.Code SE38.Enter the program name as "RC1_IDOC_SET_STATUS".Press F8 or click on execute.
Enter this IDOC number.
Enter the current status as "32".Enter the new status as "30".
Remove the tick mark for test run.
Execute.
Reprocess this IDOC by using the T.Code BD87.
If you want to new entry to the existing segment,goto the T.Code WE20.
Enter the required values.
Save.
Regards,
Krishna.

Similar Messages

  • Retrigger an Inbound IDoc to Become an Outbound from PoSDM to ECC

    Dear PoSDM Experts,
    I'm trying to browse and search for solutions on whether retriggering the inbound IDoc to an outbound IDoc from PoSDM to ECC without changing its details and had no luck.  The scenario has no aggregation and it is merely passing through PoSDM. I understand it doesn't seem practical because we can point the IDoc directly to ECC without passing PoSDM. The full scenario is an inbound IDoc is created in PoSDM coming from PI and the same IDoc will be triggered and pushed to ECC without changing the details. Sample IDoc would be WPUUMS, WPUBON and WPUTAB.
    Please let me know if the above scenario is possible without enhancement. If it is possible, kindly provide me how I should execute it in PoSDM.
    Kind regards,
    Mark

    Hi Mark,
    Well if that is the case then I will suggest you to go with custom development.
    Create Z tables for storing Inbound IDoc data  in POS DM.
    Write FM to process your inbound IDocs in POS DM Z tables.
    Write FM to generate your outbound IDocs from POS DM Z tables.
    Thanks,
    Vikrant.

  • Retrigger failed IDOC with XML HTTP port

    Hi Friends,
    Can anyone suggest me how to retrigger failed IDOCS in we05 with XML HTTP port, any other than we19 to retrigger? I have already gone through all the links in sdn, nothing seems to work, have tried program RSMIPROACT also.
    Thanks & Regards
    Ridhima

    Hello,
    Please check the below SAP Note:
    857321 - Resending HTTP IDocs automatically in status 02
    -Rahul

  • Error in Sales Order idoc - No appropriate entry found in table ADRT

    Hello SAP Gurus,
    When I am retriggering a sales order idoc I am getting the following error message.
    No appropriate entry found in table ADRT
    How can I resolve this issue.
    Thanks,
    Narayan.

    Hello Lakshmipati,
    I have checked up the customer master. There was no communication method maintained for any of the customers.
    But even then the order idoc is triggered to our XI system.
    For the one that failed I have maintained the communication method and retriggered again. It had the same failure message.
    Any helpful thoughts is highly appreciated.
    Thanks & Regards,
    Narayan.

  • Idocs not populating the fields

    Hi
    We are using Extended Classic Scenario. After the shopping cart is approved, the PO is generated in the backend R/3. The PO is generated in the backend and the idoc is triggered which is sent to supplier.
    The problem we are facing is as below:
    There are some fields in the idocs which are not getting populated. We are using badi implementation BBP_PO_INBOUND_BADI in the backend. We have used both the methods BBP_MAP_BEFORE_BAPI
    BBP_MAP_AFTER_BAPI
    The table EKPO is getting updated but the idoc does not have the fields.
    Also when we are second time retriggering the output the idoc is having the required fields.
    Kindly advice.
    Thanks and Regards
    Manoj

    Hello,
    It looks the first generation occurs to early in the process.
    Can you should check the processing time you defined in condition records ?
    3 is too early, 4 should work because a commit work is done before. And at worst set it to 1 (selection report) and schedule a job to process the message.
    Rgds,
    Pierre

  • How to handle idoc status record.

    Hi expert,
    We have configure custom idoc, the status of inbound custom idoc when posting by process code is 64 (Ready to posting), How we can post with status 54, have any idea ?
    When I am using report RBDAPP01, it is in status 51 (Error),
    How I can change the idoc status with 54 (Successful).
    Please help,
    Regards,
    study sap

    hi,
    Retrigger from here
    Try with tcode BD87 For Inbound IDOCS.
    or BD88 for outbound IDOCs.
    Refer these links
    http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/idoc-status-64-1258234
    http://help.sap.com/saphelp_sm32/helpdata/en/52/16adef543311d1891c0000e8322f96/content.htm
    Cheers
    Mohinder Singh Chauhan
    Edited by: Mohinder Singh Chauhan on Jul 21, 2008 8:08 AM

  • IDOC Error Status 64

    Hi All,
                    While posting IDOC , I am getting Status 64.Please let me know how to proceed further.
    Regards
    Raghav

    Hi Raghav,
    As Idoc status 64 comes  when the IDOC is in application layer the inbound idoc is scheduled for the background job (In collect mode)...
    Try to retrigger from  tcode BD87.
    Also have a look on this
    http://help.sap.com/saphelp_gts71/helpdata/en/43/9715647c366353e10000000a11466f/frameset.htm
    what you can do is  wait for the background which is scheduled for the same or process it through
    RSMON00 report.
    Mohinder

  • Output type- Retriggering

    Hii All
    We have a output type which gets triggered when shipment is created in SAP, it triggers Create qualifier in the functional module of an idoc.
    Our requirement is that when shipment is changed this output type is re-triggered in SAP and triggers the same idoc but with he change qualifier.
    Can anyone suggest where we can do the changes so as this output type is re-triggered.
    Thanks & Regards,
    Gaurav Manocha

    Hi,
    As already mentioned by other fellow member, you just have to tick the "Multiple Issuing" button on in the output type you are using.
    If this is done, everytime you go in change mode in the shipping document, another output type will be triggered. and as expected this will create an IDOC for you.
    One word of caution in this. Even if there are no changes done, the output gets retriggered, if this button is set on. If this is ok, then you can enable this.
    Hope this helps

  • Re-triggering Idocs from SAP Communication layer

    Hi,
    Our webmethods middleware went down for 4 hours. We are trying to see if there is a quick way to retrigger Idocs from SAP for around 3000 doc (various doc, PO, SO, Delivery, Shipment etc). Trying to see if we can change the status in SAP and retrigger (without writing a program). Is there a way to do it. Any pointers would be useful.
    Thanks,
    Anand

    There is no quick way to resend IDocs that have already passed.  I worked at a client in the past that had written a custom program to change the status of an IDoc.  The report program had a similar selection screen to WE05, but current status and new status as parameters.  The program would retrieve IDocs based on the selection criteria and update EDIDC-STATUS to '30'.  You can then resend the IDocs using RSEOUT00.
    You do not need to modify EDIDS.

  • Idoc re triggring issue

    Hi friends,
    for my customer request i have given them 2 days full volume of GLPCA Line item list and corresponding Idoc list.
    Like Idoc = PCA= PCA Doc list i have given to him in an excel sheet, it's having more than 800 idocs, now customer is asking to re trigger that idoc's, Please help me on this how to re trigger that total idoc's  at a time.
    Thanks
    Sloka

    when you mean retrigger, i assume re-process...
    if thats the case, the status of the idocs matters, if its in 64 status (ready to be processed), you can use program RBDAPP01.
    If its in 51 status(Error), you can use RBDMANIN.
    let me know.

  • IDOC  failure

    Hi All,
             Can any one help me ,there are 3 idoc documents failure .
    Issue :
    1.8547850 Balance not zero: 1,105.61 debits: 6,503.60 credits: 7,609.21
    2 and 3 also same as the above
    How can i resolve this issue. Please help me.
    Thanks
    RL

    Hi,
    Run T-code WE05 with the 'Idoc Number' or 'created on 'on the selection.
    On the display, if you click on the error Idoc, it will display 3 sets --> control recs, data records and status.
    You can find the error description by clicking on the red numbers inside the 'Status'.
    The Data records will show you details of each segment of the Idoc i.e. account number, amount etc. You will have to analyse these and determine which segment has the wrong values. Check all the debit values and all the credit values on these segments. Then you can determine which value is going wrong.
    If you are testing in Staging, you can re-trigger the failed Idoc by using T-code we19. Using this t-code, you can modify segment values of a failed IDoc and re-trigger it to see if it posts.
    However this T-code (we19) is only a test tool and should not be used in the Production envirnoment as New documents actually get posted.
    In the production environment, you would have to fix the problem in the outbound or inbound interface and then retrigger the entire end to end process.
    Please let me know if this helps.
    Thanks,
    Uma

  • Sample files for inbound IDOC's( EDI)

    Hi All,
    I am trying to get idoc's into system using EDI , wanted sample files for inbound idocs using EDI.
    If someone could send the files please.
    rgds
    Ajay Sharma

    HI,
    Here one sample file.U need to change the sender/receiver ID's accordingly to the setup at ur EDI subsystem.This 850 i/b file will create an ORDERS idoc in SAP.
    ISA³00³          ³00³          ³01³006906614GE    ³01³040986076      ³060714³0640³U³00401³000012157³1³P³>~
    GS³PO³006906614GE³040986076³20060714³0640³5008³X³004010~
    ST³850³020700691~
    BEG³00³NE³020700691³³20060714~
    N1³BS³ABC PHOENIX DIVISION³11³RA0290837~
    N1³SU³³11³II7930501~
    PO1³1³12³EA³123.45³³ND³0469520260~
    PO1³2³24³EA³190.23³³ND³0469520211~
    CTT³2~
    SE³8³020700691~
    ST³850³057796284~
    BEG³00³NE³057796284³³20060714~
    N1³BS³ABC RALEIGH DIVISION³11³RA0289036~
    N1³SU³³11³II7930501~
    PO1³1³48³EA³61.72³³ND³0469520230~
    PO1³2³12³EA³123.45³³ND³0469520260~
    PO1³3³6³EA³190.23³³ND³0469520211~
    CTT³3~
    SE³9³057796284~
    GE³2³5008~
    IEA³1³000012157~
    Also u can check in the system and find some ORDERS
    idocs and u can retrigger that from WE19.
    reward if helpfulll
    ram

  • Reliable retriggering in A2A scenarios  ( SAP-NonSAP and  NonSAP - NonSAP )

    Hi all,
    I need advise on 2 A2A scenarios we have :
    1. SAP ( IDoc ) - Third party application ( Soap service). We configfured changepointers to trigger masterdata Idoc transfer and
    Issues : If the receiver SOAP service cannot update the data in its base systems because of
    some fuctional reasons like locking ( with a response field like status = 'Locked ').
    What is the best design to do a reliable retrigger of transfer ?
    2. Third party application ( Soap service) - Third party application ( Soap service).
    Issues : If the receiver SOAP service cannot update the data in its base system because of some fuctional reasons like locking ( with a response field like status = 'Locked ').
    What is the best design to do a reliable retrigger of transfer ?
    Thanks and best regards,
    Anisha.

    Hi Anisha,
    1. Do you recommend to use SMQR or a manual retry in case of error on receiver ?
    SMQR of coz.
    2. If error is transmitted back by ALEAUD - will ALE retransfer automatically?
    Yes
    3. For a non-SAP to non-SAP Synchronous A2A scenario - if the error handling cannot be done by the applications - how can we have best reliable retriggers from XI ?
    You cant retrigger synchronous scenrios, coz the sending application is waiting for the response before going on with the programm. The Message MUST fail, may be becoz of an error response, may be becoz of timeout.
    Regards,
    Udo

  • Logical System in IDOC-XI scenario

    Hi,
         I need help to understand few things in IDOC-XI scenario, could any one help me in this regard.
        we use Adapter specific identifiers to map services, we have following type of identifiers 1) Sys.ID & Client No.  2) Logical System. 
    my questions are
    a) Are we use Logical System in B to B scenario ?
    b) Are we use LS in reference to the SAP system or Non SAP system ? if a non SAP system....how a non SAP system send an IDOC and why a non SAP system receive an IDOC ( conversion is possible in XI ) ?
    Thanks and Regards
    Mahesh.

    Hay Kumar,
    Logical systems can also be used for SAp sytems wich are not installed yet as a virtuall placeholder.
    a) yes. if on of your business is a non sap system or a propritery system that you developed yuo'll ue LS.
    b) non SAP system can send and recieve IDOCs. so it's possiable to get an IDOC from a system and turn it into an RFC for SAP or get an IDOC from an SAP system and then turn it into something else for another system.
    Have a Good One,
    Uri Lifshitz.

  • IDoc not received in MII

    Hi All, 
    I am using SAP MII 12.1.5 Build 87. 
    I am facing problem with iDoc Listner we have configured iDoc Listner properly in SAP ERP, SAP NW and in SAP MII. 
    We are able to send iDoc from SAP but we are not able to receive same in MII. 
    Port and iDoc Server is giving status connected previously it was working fine in SAP MII 12.1.5 Build 83. 
    Following are the log details for SAP MII Logger as well as SAP NW Log. 
    SAP NW Log: 
    Error processing JRA IDOC message  
    SAP MII Log: 
    Error processing JRA IDOC message  
    Error processing JRA IDOC message [server=xxx, client=xxx]  
    [EXCEPTION]
    java.lang.NullPointerException
    at com.sap.xmii.ejb.JRAListenerBean.onMessage(JRAListenerBean.java:130)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MessageListenerType.invoke(Interceptors_MessageListenerType.java:110)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Lock.invoke(Interceptors_Lock.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    at com.sap.engine.services.ejb3.runtime.impl.MDBProxyInvocationHandler.invoke(MDBProxyInvocationHandler.java:77)
    at $Proxy943.onMessage(Unknown Source)
    at com.sap.mw.jco.jra.idoc.JRAIDocExtension$IDocMessageHandler.onMessage(JRAIDocExtension.java:72)
    at com.sap.mw.jco.jra.JRA$ReaderThread.sendDirectToMdb(JRA.java:6641)
    at com.sap.mw.jco.jra.JRA$ReaderThread.sendAsynchRequest(JRA.java:6601)
    at com.sap.mw.jco.jra.JRA$ReaderThread.handleRequest(JRA.java:6771)
    at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:989)
    at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:967)
    at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:142)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:2927)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2659)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2478)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2362)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2207)
    at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:259)
    at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:322)
    at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:220)
    at com.sap.mw.jco.jra.JRA$ReaderThread.run(JRA.java:7260)
    at com.sap.engine.services.connector.jca15.work.TaskImpl.run(TaskImpl.java:255)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
    at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    Please help me out on this issue.                                         
    Regards,
    Manoj Bilthare
    Edited by: Manoj Bilthare on May 19, 2010 12:57 PM

    Hi Manoj,
    Once you have configured your Listener have you checked pressing the update button and i dont want to ask you which version of NW SP you have installed as you said it was working for you with Build 83, but nevertheless NW SP Level should not be not less than SP3.
    If this doesn't help you,please try  restarting your server again.
    How about the credential editor have you configured this as well?
    Regards,
    Sudhir Kumar
    Edited by: Sudhir Kumar Shambana on May 19, 2010 10:46 AM

Maybe you are looking for