IDOC TO HTTP Error ... Help

Hi Friends,
My scenario is sending custom IDOC's using an HTTP adapter to an external system.
there are few cases where some of the IDOC's have 25000 segment and in such cases my IDOC fails to reach the HTTP external system and it gives the below error in SXMB_MONI
I checked smq2 and the IDOC gets stuck in there and doesnt process the other small IDOC's in the same queue.
Error Message from SXMB_MONI
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please let me know as to what could be the problem . I cant restrict my IDOC segements due the nature of the requirement.
Edited by: Vijay jothimani on May 16, 2009 2:02 AM

Hi,
there are few cases where some of the IDOC's have 25000 segment and in such cases my IDOC
fails to reach the HTTP external system and it gives the below error in SXMB_MONI
If you are sure that because of message size you are getting the error then you can check the tuning guidelines mentioned in section 3.2.9 of the below document:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7
looking at the error log i would also recommend that you look at this discussion:
Error in Call Adapter
Regards,
Abhishek.

Similar Messages

I cannot fix a 404 HTTP error help please

hello i am trying to access a web address and i try using safari or firefox, and i always encounter this error :
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
Technical Information (for support personnel)
Go to Microsoft Product Support Services and perform a title search for the words HTTP and 404.
Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Web Site Setup, Common Administrative Tasks, and About Custom Error Messages.
the web address i am trying to go to is www.shoemetro.com i only have this kind of error when i tyoe this address otherwise i don't have any problem using other addresses that is kind of weird !!!
if you can help me i would appreciate.
thanks

A 404 error is a server error and can only be 'cured' by the mainatiner of that server not by you.
http://en.wikipedia.org/wiki/Link_rot
Stefan

HTTP error 0 testing not serving php pages please help

Hello everyone,
I am using DWCS3, the free version of MAMP on my MacBook Pro Leopard 10.5.6.
I have built a customer registration form with a Transitional <!DOCTYPE>. I have been following the instructions from The Essential Guide to Dreamweaver CS3, using a wizard to build a registration form, in chapter 15.
When I try to preview the form in the web browser, I get a white screen.
When I click the live data button I get an; HTTP error 0 message occured while attempting to request the file http://localhost:8888/mywebsite/page_S9INUKZB.php from the testing server.
possible reasons:
1. Files in MacHD/Applications/MAMP/htdocs/mywebsite with .php extension are not being executed by the testing server.
2. The MacHD/Applications/MAMP/htdocs/mywebsite does not map to http://localhost:8888/mywebsite URL on the testing server.
I've gone over the site definitions several times and have configured MAMP differently twice, using ports 80 and 3306 and also 8888 and 8889. The same problem has happened in both instances here is my site definition info:
Local info:
Site name: mywebsite
Local root folder: MacHD:Users:myname:Desktop:mywebsite
links relative to document: http://localhost/
Remote info:
Access: Local/Network
Remote folder: MacHD:Applications:MAMP:htdocs:mywebsite
Testing server:
Server model: PHP/MySQL
Access: Local/Network
Testing server folder: MacHD:Applications:MAMP:htdocs
URL prefix: http://localhost:8888/mywebsite/
Web sharing is turned off.
Dreamweaver/Preferences/Preview in browser/preview using temporary files is turned off, yet in my HTTP error 0 message there is a string of characters after the page name, suggesting that dreamweaver is using temporary files.
I have attached a compressed copy of the customer registration form maybe the problem is the page. I have gone round and round in circles with this and I can't seem to sort it out can somebody please help me.
Thankyou.

Hello David,
Thanks for getting back to me, sorry for the late reply, I've been away for a few days.
I have done what you suggested, and altered the links relative to document: http://localhost:8888/mywebsite/
I have also restarted dreamweaver and mamp.
Nothing has changed when I try to view the page through the browser I get a white screen and the HTTP error 0 is still displaying, With the same message as before.
I have since created a new form, connected it to my user table, and populated the table with info, and that worked.
I then added the php validating code as suggested in chapter 15, pages 481 through to 485. I've also checked the code against your example page register_user_03.php.
However when I put the page on the testing server and try to view it, all I get is a white screen, and an HTTP error 0 the testing server is not executing pages with a .php extension. Or the URL prefix isn't mapped properly.
I have also checked all my settings in MAMP and left a question on the forum but they haven't answered.
Is there a setting or connection that I need to enable in Apache? I'm stumped.
I'm hoping you might have some tricks up your sleeve.
Thanks

All website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not help

''dupe of https://support.mozilla.org/en-US/questions/928117''
all website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not helping in any ways

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.

HTTP Error 404 - Help

When trying to run interMedias clipboard I receive the following error "HTTP Error 404"
"The Web server cannot find the file or script asked for"
I have checked the installation and it seems that the dll will not load.
Any help on this will be greatly appreciated.
Thank you
null

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HELP! Why am I getting HTTP ERROR: 404 when trying to download CS3?

I am trying to download CS3 Design Premium from Adobe because I lost my installation discs and need to reinstall.
The link to download CS3 Design Premium English is broken and gives the following error:
HTTP ERROR: 404 /support/downloads/dlm/main.jsp
RequestURI=/support/downloads/dlm/main.jsp
Any help out there?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

(Pleeeeeeez HELP) HTTP Error 404

I installed Business Object Enterprise XI using a fresh installation (using IIS ASP.NET as WCA) and I can not open anything. All pages gives me HTTP Error 404.
I added aspnet_isapi.dll to the allowed extensions in IIS. I have .Net framework 2.0 installed on the server & IE 6.0 SP2. I'm not sure if this installation will install another framework and use it.
PLEASE PLEASE PLEASE HELP.

For top level URLs (such as www.isp.com), the first possibility is that the request for your site URL has been directed to a Web server that thinks it never had any pages for your Web site. This is possible if DNS entries are fundamentally corrupt, or if your Web server has corrupt internal records. The second possibility is that the Web server once hosted the Web site, but now no longer does so and can not or will not provide a redirection to another computer which now hosts the site. If your site is completely dead - now effectively nowhere to be found on the Internet - then the 404 message makes sense. However if your site has recently moved, then an 404 message may also be triggered. This is also a DNS issue, because the old Web server should no longer be accessed at all - as soon as global DNS entries are updated, only your new Web server should be accessed.
For low-level URLs (such as www.isp.com/products/list.html), this error can indicate a broken link. You can see this easily by trying the URL in a Web browser. Most browsers give a very clear '404 - Not Found' message.
Provided that your Web site is still to be found somewhere on the Internet, 404 errors should be rare. For top level URLs, they typically occur only when there is some change to how your site is hosted and accessed, and even these typically disappear within a week or two once the Internet catches up with the changes you have made. For low-level URLs, the solution is almost always to fix your Web pages so that the broken hypertext link is corrected.
Could it also be the webuser account access rights?

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

IDOC-- XI-- HTTP (non-sap) 403 Forbidden

Hi guys,
When I execute my scenario IDOC>XI>HTTP (non-sap) URL address Asynchr. The receiver receives the message correctly
but in my XI monitoring the message stands in error mode.
At first sight this is not a big problem because the receiver receives the message correctly
but it would be nice if the message would stand in processed succesfully.
The error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>403</SAP:P1>
<SAP:P2>Forbidden</SAP:P2>
<SAP:P3>Service Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 403 reason Forbidden explanation Service Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please don't redirect me to an old topic because I have read all topics and none of them could help me. :s
TIA
Message was edited by: Peter Delve

Hi,
this is the describtion of W3ORG:
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
May contact web admin.
Regards
Matt

HTTP Error

Hi, In one of my idoc to file scenario I am getting the below error in SXMB_MONI,
Please can someone help me to troubleshoot it.
HTTP response contains status code 503 with the description Service Unavailable Error while sending by HTTP (error code: 503, error text: Service Unavailable
regards
Reema

Hi,
503 Service unavailable
this is because of the server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
you can go for the possible solution as mentioned below:
Because of J2EE application com.sap.aii.af.ms.app not active
1. Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine.
2. The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
3. Refer SAP Note 803145,807000,791655
4. In Visual Admin, check if all the required services are running and start them, else restart the Java Stack in the XI server.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi /people/vinoth.murugaiyan/blog/2007/08/06/how-to-the-change-the-application-stopped-message
http://help.sap.com/saphelp_nw04/helpdata/en/64/351941edd5ef23e10000000a155106/frameset.htm
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 17, 2008 4:05 AM

IDOC---JDBC scenario error: "INTERNAL" HTTP_RESP_STATUS_CODE_NOT_OK

i have a IDOC-XI--JDBC scenario,
the scenario fails at the Call Adpater Pipeline step............giving following error:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error when sending using HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
pls help me.....
Message was edited by:
sudeep dhar

but this error occurs after few message pass successfully.....
means at an interval this error happens...then again few messgae pass successfully,
This is the error which i get in MONI:
ERROR_CATEGORY: INTERNAL
ERROR_ID: HTTP_RESP_STATUS_CODE_NOT_OK
and in the pipeline step i can see the error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error when sending using HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

IDOC to HTTP tutorial and vice versa

Hello all,
I am a beginner in PI and I have just configured my first IDOC to file scenario. I am looking to implement an IDOC to HTTP scenario where I create an order in ERP 2004 and the order is sent as an XML file via PI into a suppliers website. I am trying to find a tutorial on how to do that but after looking here in SDN and in google, I couldn't find something helpful. There are plenty of file to idoc and idoc to file tutorials, but not an idoc to http .
Could you please provide me with some links or some information on where I can start with that. I am also interested on the reverse, i.e. HTTP to IDOC: The supplier sends the invoice in XML format through PI and I receive it in my ERP 2004 system as an IDOC
Many thanks
Andreas

Hey folks!
We have a PI 7.31 SPS5 Java-only installation here and are using the module IDOCFlatToXmlConvertor. For single IDocs with one line for the EDC_DC40 header and the others for the IDoc payload the conversion works. But when we want to process multiple IDocs from the same type within one file, we see this error in the log:
Module Exception 'com.sap.aii.af.idoc.exception.IDOCModuleException: No data segments for DOCNUM = ' found, cause: <null>
Are there any requirements how the multiple IDocs have to be structured within the file?
Best regards
Heinrich
Update:
I found out that the module wants each record to contain the corresponding DOCNUM to find the matching records. The non-SAP sender system normally does not set this value. Is there a way to "convince" the module to convert the IDocs nevertheless?

HTTP Error 405 - The HTTP verb used to access this page is not .....

Goodmorning,
I've installed BO XI R3 SP4 on a 2k3-server with IIS 6.0. I wanted to configurate the SSO. After changing the web.config file and restart of the IIS , I get the following error :
HTTP Error 405 - The HTTP verb used to access this page is not allowed.
Internet Information Services (IIS)
The frame where you normally are using for authentication has this error, the frame around is normal.
Hope someony can help, thx in advance

I can't fin a upload button , so the file in plain text gepasted
Hope it is readable :
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2012-02-29 12:19:21
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/logon.aspx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/res/schema.blue/default.css.ashx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/js/utils.js.ashx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/js/helpSystem.js.ashx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logon.pattern 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/listing/blank.aspx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logo 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/logon/logon.aspx parameter=logonService 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 POST /PlatformServices/Shared/Logon/Logon.aspx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 405 0 1
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/logon.aspx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/res/schema.blue/default.css.ashx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/js/utils.js.ashx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/js/helpSystem.js.ashx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/listing/blank.aspx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logon.pattern 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logo 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/logon/logon.aspx parameter=logonService 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 POST /PlatformServices/Shared/Logon/Logon.aspx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 405 0 1
2012-02-29 12:33:17 W3SVC1 10.13.0.119 OPTIONS /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 200 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
Thx in advance for your reply

HTTP Error 500.0 with CF 9 & IIS 7.5 32 bit enabled web app

Hello !
I have recently installed CF 9 64 bit on Windows Server 2008 Standard Edition R2 with IIS 7.5. I have just set the 'Enable 32 bit applications' option on the application pool settings to 'true' for one of the sites as I have some web pages that make use of a 32 bit COM DLL. I originally had this option set to 'false' and all of the web pages in my site were being served fine with the exception of the ones making use of the 32 bit COM DLL.
The details on the error message from IIS are as follows:
HTTP Error 500.0 - Internal Server Error
Detailed Error Information:
Module: IsapiModule
Notification: ExecuteRequestHandler
Handler: AboMapperCustom-75500
Error Code: 0x800700c1
Most Likely causes:
IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application.
The authenticated user does not have permission to use this DLL.
The request is mapped to a managed handler but the .NET Extensibility Feature is not installed.
Things you can try:
Ensure that the NTFS permissions for the web.config file are correct and allow access to the Web server's machine account.
Check the event logs to see if any additional information was logged.
Verify the permissions for the DLL.
Install the .NET Extensibility feature if the request is mapped to a managed handler.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
I am not sure if the error is permissions related or not.
1. How do I rectify this error and still keep the 'Enable 32 application' option turned on so I can call a 32 bit COM DLL ?
2. In general, can the 64 bit version of CF 9 even invoke 32 bit COM DLL's on IIS 7.5 or should this only be done with the 32 bit version of CF 9 ?
I would appreciate any help.
Thank you.

Here is the info:
http://helpx.adobe.com/coldfusion/kb/coldfusion-security-hotfix-apsb12-15.html
See notes section 5
CF9.0.2 came out with apsb12-15 applied.
Difference with CF10 is you can use CFadmin to change postparamlimit setting.
Cheers, Carl.

Oracle epm 11.1.2.2 http error

I installed (personal installation) and configured 11.1.2.2. Installation was successful. Configuration only partly successful as most of the errors point to http error and unable log on to workspace. It brings up a java.net error.
Can you help please?

( Apr 4, 2013 5:12:40 PM ) Configuration tasks state test successfully completed.
( Apr 4, 2013 5:12:40 PM ) - passed: Validating that configuration tasks have been completed
( Apr 4, 2013 5:12:40 PM ) DB Connectivity test for repository successfully completed.
( Apr 4, 2013 5:12:40 PM ) - passed: Checking connection to database jdbc:oracle:thin:@RATNAP01:1521:FUSION
( Apr 4, 2013 5:12:43 PM ) Web Applications check failed.
( Apr 4, 2013 5:12:43 PM ) - failed: Availability of Web application context http://RATNAP01:9000/aif/faces/setup/Main.jspx
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
( Apr 4, 2013 5:12:43 PM ) - failed: Availability of Web application context http://RATNAP01:9000/oracle-epm-erpi-webservices/RuleService
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
( Apr 4, 2013 5:12:49 PM ) External Providers check successfully completed.
( Apr 4, 2013 5:12:49 PM ) - passed: Check Native Directory external authentication provider configuration
( Apr 4, 2013 5:12:53 PM ) Login check failed.
( Apr 4, 2013 5:12:53 PM ) - failed: Checking availability of login http://RATNAP01:9000/interop/logon
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code: 404
( Apr 4, 2013 5:12:58 PM ) Missed registry links check successfully completed.
( Apr 4, 2013 5:12:58 PM ) - passed: Checking that all components in the registry have a link to host
( Apr 4, 2013 5:12:58 PM ) Datasource entries existence successfully completed.
( Apr 4, 2013 5:12:58 PM ) - passed: Checking if datasource property exists in the registry
( Apr 4, 2013 5:12:58 PM ) Datasource entries existence failed.
( Apr 4, 2013 5:12:59 PM ) Datasource entries existence successfully completed.
( Apr 4, 2013 5:12:59 PM ) - passed: Checking if datasource property exists in the registry
( Apr 4, 2013 5:13:00 PM ) Datasource entries existence failed.
( Apr 4, 2013 5:13:02 PM ) Web Server Registry check successfully completed.
( Apr 4, 2013 5:13:02 PM ) - passed: Checking if Web Server linked to the all Web Applications
( Apr 4, 2013 5:13:02 PM ) Shared library targeting test failed.
( Apr 4, 2013 5:13:13 PM ) Checking if registry database compy with taxonomy. successfully completed.
( Apr 4, 2013 5:13:13 PM ) - passed: All components comply with registry taxonomy.
( Apr 4, 2013 5:13:13 PM ) System path variable length test successfully completed.
( Apr 4, 2013 5:13:13 PM ) - passed: Checking whether system path variable length exceeds 2,000
( Apr 4, 2013 5:13:13 PM ) CSS Status Check failed.
( Apr 4, 2013 5:13:13 PM ) - failed: Validating that CSS has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=CSS
( Apr 4, 2013 5:13:14 PM ) CES Status Check failed.
( Apr 4, 2013 5:13:14 PM ) - failed: Validating that CES has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=CES
( Apr 4, 2013 5:13:14 PM ) Audit Status Check failed.
( Apr 4, 2013 5:13:14 PM ) - failed: Validating that Audit has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=AUDIT
( Apr 4, 2013 5:13:14 PM ) LCM Status Check failed.
( Apr 4, 2013 5:13:14 PM ) - failed: Validating that LCM has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=LCM
( Apr 4, 2013 5:13:15 PM ) HUB Status Check failed.
( Apr 4, 2013 5:13:15 PM ) - failed: Validating that HUB has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=HUB
( Apr 4, 2013 5:13:15 PM ) Registry Status Check failed.
( Apr 4, 2013 5:13:15 PM ) - failed: Validating that Registry has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=REGISTRY
( Apr 4, 2013 5:13:15 PM ) Product registry component test successfully completed.
( Apr 4, 2013 5:13:15 PM ) - passed: Checking if product has only one product node in registry.
( Apr 4, 2013 5:13:18 PM ) Product registry component test failed.
( Apr 4, 2013 5:13:25 PM ) EPMA DimensionServer Server Configuration successfully completed.
( Apr 4, 2013 5:13:25 PM ) - passed: Validating EPMA Dimension Server hyperion-bpma-server startup... Successful...
( Apr 4, 2013 5:13:34 PM ) Check EPMA services individually failed.
( Apr 4, 2013 5:13:34 PM ) - failed: Validating whether jobmanager service is available.
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code: 500
( Apr 4, 2013 5:13:35 PM ) Essbase Studio Server failed.
( Apr 4, 2013 5:13:35 PM ) - failed: Validating Essbase Studio Server connection
Error:api.CPException.networkError
( Apr 4, 2013 5:13:40 PM ) Financial Management Web Service access test successfully completed.
( Apr 4, 2013 5:13:40 PM ) - passed: Checking accessibility of Web services on http://RATNAP01:80/HSFWebServices/HSFWebService.asmx.
( Apr 4, 2013 5:13:40 PM ) Check if the Interactive Reporting Product (INTERACTIVE_REPORTING_PRODUCT) component exists. successfully completed.
( Apr 4, 2013 5:13:40 PM ) - passed: Found: 1.
( Apr 4, 2013 5:13:41 PM ) Check if IR BI Services are available. successfully completed.
( Apr 4, 2013 5:13:41 PM ) - passed: All IR BI Services are available: IRBI_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:41 PM ) Check if IR Job Services are available. successfully completed.
( Apr 4, 2013 5:13:41 PM ) - passed: All IR Job Services are available: IRJOB_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:41 PM ) Check if IR DAS Services are available. successfully completed.
( Apr 4, 2013 5:13:41 PM ) - passed: All IR DAS Services are available: IRDAS_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:41 PM ) Check if IR Log Services are available. successfully completed.
( Apr 4, 2013 5:13:41 PM ) - passed: All IR Log Services are available: IRLOG_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:42 PM ) Check if the Reporting and Analysis Setup (RA_SETUP) component exists. successfully completed.
( Apr 4, 2013 5:13:42 PM ) - passed: Found: 1.
( Apr 4, 2013 5:13:42 PM ) Check if all required RAF properties exist under the Reporting and Analysis Setup component. successfully completed.
( Apr 4, 2013 5:13:42 PM ) - passed: All required properties exist.
( Apr 4, 2013 5:13:42 PM ) Check if the Agent Module (AGENT_MODULE) components exist. successfully completed.
( Apr 4, 2013 5:13:42 PM ) - passed: Found: 5.
( Apr 4, 2013 5:13:43 PM ) Check if the Reporting and Analysis Service (RA_SERVICE) components exist. successfully completed.
( Apr 4, 2013 5:13:43 PM ) - passed: Found: 20.
( Apr 4, 2013 5:13:43 PM ) Check if the Agent (AGENT) components exist. successfully completed.
( Apr 4, 2013 5:13:43 PM ) - passed: Found: 1. Hosts for the components: RATNAP01.
( Apr 4, 2013 5:13:43 PM ) Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists. successfully completed.
( Apr 4, 2013 5:13:43 PM ) - passed: Found: 1.
( Apr 4, 2013 5:13:43 PM ) Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist. successfully completed.
( Apr 4, 2013 5:13:43 PM ) - passed: Found: 1. Hosts for the components: RATNAP01.
( Apr 4, 2013 5:13:44 PM ) Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT. successfully completed.
( Apr 4, 2013 5:13:44 PM ) - passed: Data in Registry and database are consistent.
( Apr 4, 2013 5:13:45 PM ) Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS). successfully completed.
( Apr 4, 2013 5:13:45 PM ) - passed: Data in Registry and database are consistent.
( Apr 4, 2013 5:13:45 PM ) Check if all required RAF properties exist under the RAF Logical Web App component. successfully completed.
( Apr 4, 2013 5:13:45 PM ) - passed: All required properties exist.
( Apr 4, 2013 5:13:45 PM ) Check if all required Workspace configuration files exist under the RAF Logical Web App component. successfully completed.
( Apr 4, 2013 5:13:45 PM ) - passed: All required files exist.
( Apr 4, 2013 5:13:46 PM ) Check if Agents are available. successfully completed.
( Apr 4, 2013 5:13:46 PM ) - passed: All Agents are available: Agent on ratnap01.
( Apr 4, 2013 5:13:46 PM ) Check if RAF Services are available. successfully completed.
( Apr 4, 2013 5:13:46 PM ) - passed: All RAF Services are available: RAF_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:47 PM ) Check if Repository data folder exists. successfully completed.
( Apr 4, 2013 5:13:47 PM ) - passed: Data file locations are valid.
( Apr 4, 2013 5:13:48 PM ) Check if Job Factory data folder exists. successfully completed.
( Apr 4, 2013 5:13:48 PM ) - passed: Data file locations are valid.
( Apr 4, 2013 5:13:49 PM ) Check if Service Broker data folder exists. successfully completed.
( Apr 4, 2013 5:13:49 PM ) - passed: Data file locations are valid.
( Apr 4, 2013 5:13:50 PM ) Check if Event Server data folder exists. successfully completed.
( Apr 4, 2013 5:13:50 PM ) - passed: Data file locations are valid.
( Apr 4, 2013 5:13:50 PM ) Check if every Agent is associated with some Agent Module(s). successfully completed.
( Apr 4, 2013 5:13:50 PM ) - passed: Every Agent is associated with some Agent Module(s).
( Apr 4, 2013 5:13:51 PM ) Check if every Reporting and Analysis Service is associated with some Agent Module. successfully completed.
( Apr 4, 2013 5:13:51 PM ) - passed: Every Reporting and Analysis Service is associated with some Agent Module.
( Apr 4, 2013 5:13:52 PM ) Check if every Agent Module is associated with some Agent. successfully completed.
( Apr 4, 2013 5:13:52 PM ) - passed: Every Agent Module is associated with some Agent.
( Apr 4, 2013 5:13:52 PM ) Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s). successfully completed.
( Apr 4, 2013 5:13:52 PM ) - passed: Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
( Apr 4, 2013 5:13:53 PM ) Check if Agent Modules and corresponding Agents belong to the same host. successfully completed.
( Apr 4, 2013 5:13:53 PM ) - passed: Agent Modules and corresponding Agents belong to the same host.
( Apr 4, 2013 5:13:56 PM ) Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host. successfully completed.
( Apr 4, 2013 5:13:56 PM ) - passed: Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
( Apr 4, 2013 5:13:57 PM ) Check the possibility to login on Web Analysis Server. failed.
( Apr 4, 2013 5:13:57 PM ) - failed: An error occurred while running the check.
Error:An error occurred while running the check.
( Apr 4, 2013 5:13:57 PM ) Check connectivity between Web Analysis Server and Essbase Server. failed.
( Apr 4, 2013 5:13:57 PM ) - failed: An error occurred while running the check.
Error:An error occurred while running the check.
( Apr 4, 2013 5:13:58 PM ) Check connectivity between Web Analysis Server and Financial Management Server. failed.
( Apr 4, 2013 5:13:58 PM ) - failed: An error occurred while running the check.
Error:An error occurred while running the check.
( Apr 4, 2013 5:14:20 PM ) External repository access test successfully completed.
( Apr 4, 2013 5:14:20 PM ) - passed: Launch external checker with next command: C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat FetchCategory ****** localhost 6800 /Sample Content
( Apr 4, 2013 5:14:36 PM ) External login test for IR successfully completed.
( Apr 4, 2013 5:14:36 PM ) - passed: Launch external checker with next command: C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat PingBQService ****** localhost 6800
( Apr 4, 2013 5:14:36 PM ) Financial Management Application Server Configuration successfully completed.
( Apr 4, 2013 5:14:36 PM ) - passed: Validating Financial Management Server registration Successful...
( Apr 4, 2013 5:14:50 PM ) Financial Management Service Validation failed.
( Apr 4, 2013 5:14:50 PM ) - failed: Verify that the Financial Management service is working.
Error:EPMVLD-01024: The Financial Management service check failed: ERROR: Unable to CreateApplicationCAS
( Apr 4, 2013 5:14:52 PM ) Financial Management Web Server successfully completed.
( Apr 4, 2013 5:14:52 PM ) - passed: Validating Financial Management Web application connection Successful...
( Apr 4, 2013 5:14:54 PM ) SmartView Provider successfully completed.
( Apr 4, 2013 5:14:54 PM ) - passed: Validating Financial Management SmartView Provider connection Successful...
( Apr 4, 2013 5:14:57 PM ) LCM Provider successfully completed.
( Apr 4, 2013 5:14:57 PM ) - passed: Validating Financial Management LCM Provider connection Successful...
( Apr 4, 2013 5:15:16 PM ) Essbase Java API checker failed.
( Apr 4, 2013 5:15:16 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** RATNAP01:1423 Embedded
Error:EPMVLD-01011: Result 1; Error message: Message was not included in output, check logs for details.
( Apr 4, 2013 5:15:16 PM ) Check system-jazn-data.xml file for HIT entries successfully completed.
( Apr 4, 2013 5:15:16 PM ) - passed: All HIT entries are present in system-jazn-data.xml
COMP ID = oracle.EPMOHPS
Hyperion Provider Services - Release 11.1.2.2.100.2167
Copyright (c) 1991, 2012 Oracle and / or its affiliates. All rights reserved.
connection mode : EMBEDDED
essbase.properties: essbase.properties
java System properties -DESS_ES_HOME: null
( Apr 4, 2013 5:15:29 PM ) Essbase server check failed.
( Apr 4, 2013 5:15:29 PM ) - failed: Validating Essbase Server connection to RATNAP01
Error:Cannot connect to olap service. Cannot connect to Essbase Server at "RATNAP01:1423". Network error [10061]: Failed to connect to [RATNAP01:1423]
( Apr 4, 2013 5:15:37 PM ) Essbase server check using MaxL failed.
( Apr 4, 2013 5:15:37 PM ) - failed: Validating Essbase Server startup using MaxL command
Error:EPMVLD-01010: Cannot connect to Essbase Server using MaxL.
( Apr 4, 2013 5:15:38 PM ) Module login test failed.
( Apr 4, 2013 5:15:38 PM ) - failed: Module test for Performance Management Architect with URL http://RATNAP01:9000/workspace/index.jsp?module=awb.awb
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code with POST method: 404
( Apr 4, 2013 5:15:38 PM ) Web Server link test failed.
( Apr 4, 2013 5:15:48 PM ) EnumerateDimensions failed.
( Apr 4, 2013 5:15:48 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions
Error:EnumDimensions failed on initialization. Please check all registry information is valid and that HSS is running.
( Apr 4, 2013 5:15:59 PM ) EnumerateApplications failed.
( Apr 4, 2013 5:15:59 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications
Error:EnumApplications failed on initialization. Please check all registry information is valid and that HSS is running.
( Apr 4, 2013 5:16:09 PM ) EnumerateDataSynchronizations failed.
( Apr 4, 2013 5:16:09 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs
Error:EnumDataSyncs failed on initialization. Please check all registry information is valid and that HSS is running.
( Apr 4, 2013 5:16:20 PM ) DimensionEditorLoadAdf failed.
( Apr 4, 2013 5:16:20 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf
Error:DimEditorLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
( Apr 4, 2013 5:16:29 PM ) ApplicationManagerLoadAdf failed.
( Apr 4, 2013 5:16:29 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error:AppMgrLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.

IDOC TO HTTP Error ... Help

Similar Messages

Maybe you are looking for