IDoc type ZSBC316 could not be found

dear expert;
when i connect bw and ecc ,an error occured, it said IDoc type ZSBC316 could not be found,could you give some advise?

Hi,
It is a customized idoc type, check if the IDoc type has been released. WE30, select EDIT and "Set Release ".
Thanks
Krithika

Similar Messages

IDoc type ZSDB003 could not be found.

Hi,
I have created source system for PCFILE. While checking I'm getting error message "<b>Basic type ZSDB003 does not exist</b>".
Where can I make this entry? and where can i get list of valid idocs?
I have search in the forums and found some threads but could not found relevant thread.
Regards
SSS

Hi friend,
Where you are getting this error ?
If it is After creating the Source System....Delete it and Recreate.
If it is after loading the Data....In the Monitor Screen....Details tab....Select the Idoc > Click on Manual Update ( After Right clicking ).
In Transfer StructureIf u maintain IDoc as a Transfer Method ...make sure that you have selected ALE Inbox and Data Target option in the Processing Tab of the Info Package.
Assign points if it is helpful.
Regards,
Ramkumar Ghattamaneni.

Error Master Type definition could not be found : FPGA

I am having similar/exact error condition as in the below post..
http://forums.ni.com/t5/LabVIEW/Error-Master-Copy-for-Type-Definition-Could-Not-Be-Found/m-p/1496866...
The *.lvbit file i am using was compiled in Labview 8.2.1 and I am now using 2009 version of Labview. Unlike the suggested solution, recompilation of *.lvbit file is ruled out due to lack of source code access.
Any help towards troubleshooting is appreciated...

Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
Here's what I did:
Removed auto-populating folder from project (doubt this mattered, still broken after this)
Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
Just in case the names give any insight, they are:
Older: NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
CLA, LabVIEW Versions 2010-2013

Error: Master Copy for Type Definition Could Not Be Found

See screenshot below please. The typedef is there (I navigated to it via windows explorer and it's not greyed out in the code), and my FPGA VI is not broken, which uses the exact same control. I also created these constants by right clicking and choosing create constant, so it's not as if I'm loading the wrong enum. Has anyone seen this before?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.
Attachments:
untitled.PNG ‏30 KB

Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
Here's what I did:
Removed auto-populating folder from project (doubt this mattered, still broken after this)
Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
Just in case the names give any insight, they are:
Older: NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
CLA, LabVIEW Versions 2010-2013

The type '*', provided as the Service attribute value in the ServiceHost directive, or provided in the configuration element * could not be found

I have a provider hosted app in sharepoint which works locally without problem. I followed this tutorial to publish it to azure
http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/09/05/how-to-deploy-a-provider-hosted-app-as-an-azure-site.aspx
However after publishing the webservice doesnt work I get this exception:
[InvalidOperationException: The type 'x.IntranetWeb.Services.AppEventReceiver', provided as the Service attribute value in the ServiceHost directive, or provided in the configuration element system.serviceModel/serviceHostingEnvironment/serviceActivations could not be found.]
System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) +62739
System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath, EventTraceActivity eventTraceActivity) +1429
System.ServiceModel.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity) +52
System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity) +598
[ServiceActivationException: The service '/Services/AppEventReceiver.svc' cannot be activated due to an exception during compilation. The exception message is: The type 'x.IntranetWeb.Services.AppEventReceiver', provided as the Service attribute value in the ServiceHost directive, or provided in the configuration element system.serviceModel/serviceHostingEnvironment/serviceActivations could not be found..]
System.Runtime.AsyncResult.End(IAsyncResult result) +486572
System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +174
System.ServiceModel.Activation.ServiceHttpModule.EndProcessRequest(IAsyncResult ar) +345998
System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +9683593
My web.config which I didnt touch.
<?xml version="1.0" encoding="utf-8"?>

<configuration>
<appSettings>
<add key="webpages:Version" value="3.0.0.0" />
<add key="webpages:Enabled" value="false" />
<add key="ClientValidationEnabled" value="true" />
<add key="UnobtrusiveJavaScriptEnabled" value="true" />
<add key="ClientId" value="xx-04e7-4caf-854a-89c20577d7da" />
<add key="ClientSecret" value="ljguTvxHR+xx+Pl1IMg1Hjt5rsQ=" />
</appSettings>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
<customErrors mode="Off"/>
</system.web>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" culture="neutral" publicKeyToken="30ad4fe6b2a6aeed" />
<bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Optimization" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="1.1.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="WebGrease" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="0.0.0.0-1.5.2.14234" newVersion="1.5.2.14234" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Helpers" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-3.0.0.0" newVersion="3.0.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.WebPages" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-3.0.0.0" newVersion="3.0.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-5.2.0.0" newVersion="5.2.0.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
<system.serviceModel>
<bindings>
<basicHttpBinding>

<binding name="secureBinding">
<security mode="Transport" />
</binding>
</basicHttpBinding>
</bindings>
<protocolMapping>
<add binding="basicHttpBinding" scheme="https" bindingConfiguration="secureBinding" />
</protocolMapping>
</system.serviceModel>
<system.webServer>
<handlers>
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<remove name="OPTIONSVerbHandler" />
<remove name="TRACEVerbHandler" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="*" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
</system.webServer>
</configuration>
and a piece of the code of the remote event receiver
<%@ ServiceHost Language="C#" Debug="true" Service="x.IntranetWeb.Services.AppEventReceiver" CodeBehind="AppEventReceiver.svc.cs" %>
namespace x.IntranetWeb.Services
public class AppEventReceiver : IRemoteEventService
Follow me on Twitter
levalencia Blog

Hi,
The issue here is the mapping of the interface to the service in question, and usually points to a possible mistype or rename of something within your service architecture.
You need to make sure your namespace and service name here match your service name itself.
For detailed information, you could refer to:
https://haddicus.wordpress.com/2011/06/06/service-attribute-value-not-found-wcf-services/
http://stackoverflow.com/questions/9557221/the-type-restservice-weddingservice-provided-as-the-service-attribute-value-i
Regards

After I updated my iPhone with IOS 6.1 my old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. On the Apple site the Manage my Apple ID says my old Apple ID could not be found. How do I get this to stop?

I just updated my iPhone with the newest update IOS 6.1. My old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. All the passwords I type in do not work. I no longer have access to this email which is my old Apple ID. After installing the newest software update my old Apple ID came up to finish configuring. Since I no longer have access to this Apple ID and email account and after trying some passwords I skipped the step. It then said FaceTime, iCloud (which I do not use), and more may not work. I clicked that it was OK since I could not remember the password to my old Apple ID. I then went to my settings to be sure my newer email was my Apple ID by typing in my current Apple ID and password. Also, I went to Manage my Apple ID online and my old Apple ID could not be found. Is it OK I skipped that step in the IOS 6.1 configuration? How do I get my old Apple ID to stop popping up?

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe.

Hi,
After moving my files from SP 2010 to SP 2013 , for all my web parts i am getting A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe. error. I checked web.config files
and they are there as safe control and trust level is also full.
These webparts work in 2010.
Do i need to tweak something in code or distributed cache to make this thing work? The errors i see are
Error importing WebPart. Assembly c , Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29, TypeName. C. A Web Part or Web Form Control on this Page cannot be displayed or imported. The type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
Getting Error Message for Exception Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type C Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
An error occurred while attempting to add the gallery item [Custom] c to the page. The error was: Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The
type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29 could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
Adit

Hi Adit,
According to your description, my understanding is that the error occurred when you deployed the .wsp files to SharePoint 2013.
I recommend to check if all the assemblies are put into the BIN and GAC.
If above cannot work, you can check the troubleshooting steps in the link below:
http://www.bluedoglimited.com/SharePointThoughts/Lists/Posts/Post.aspx?ID=189
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Photoshop Elements 6: Could not use type tool because the file could not be found

Using Adobe Photoshop Elements 6.0 well for a while.
Tried to use the Type Tool to overlay text and obtained this error:
Could not use the type tool because the file could not be found
After research, I reset all tools, tried to repair (failed: insert disc one), and then removed/re-installed. Still have the same problem.
Are the system fonts corrupt or is an Adobe .ini file suspect?
Other reports have suggested using a 3rd-party font manager to inspect/disable fonts.
First wanted to post this error here for feedback/recommendations
Any suggestion on how to recover the Type Tool functionality?
Eric Edberg
Adobe Photoshop Elements Repair Workaround
When trying to repair the well-known: insert disc one, error occurred. Was able to successfully repair the installation by dragging the entire Adobe Photoshop Elements directory from the original CD-ROM onto a hard drive and executing locally. Seems it does not like repairing over the CD-ROM but it works correctly if the install source is on disc...

John,
Yesterday, I decided to completely remove all Adobe products: PSE 6, Premiere 4, Reader, ActiveX plugins & legacy/old uninstalled product directories that Adobe has left turd-lets around including old Acrobat 3/6 directories. Used A/D Software to remove all adobe products and then followed your instructions AND the instructions on Adobe's support web site to manually remove these products.
It boiled down to manually removing the entire Adobe directory in Progam Files, "saving" the entire Adobe directory structure in each users (3) Document and Settings in the Application Data and Local Settings (as instructed by you and Adobe) and rebooting.
I also saved the local All Users "configuration" database/cache that contained the Tag and other information to make sure the system was clean
This included following the manual Regit instructions to remove legacy Adobe registry hives. I deleted all keys for all Adobe product trees that I could locate (following instructions from Adobe).
Reboot
Scheduled a CHCKDSK on all drives and rebooted
Dragged my complete image library to an archive location and deleted them on the C: drive
Did a complete system Defrag
Re-installed Adobe and alas still have the same problem with the Type Tool....
The only thing I did not do was selectively remove the "fonts" because various instructions seemed to indicate many are "required" by the windows or other applications and I was not really sure how to identify which ones were safe to remove w/o affecting the core system.. I'll have to re-read these instructions next.
Microsoft has a "Font Validator" tool, but that only checks 1 font at a time and you have to read the "results". May look for other tools.
Will be able to check the font structure this weekend since it will take some research before I'm comfortable just removing fonts in trial/error mode. I'll need to make a backup image of my computer before I start this (just in case).
Thanks for follow-ups too!
Eric Edberg

The type or namespace name 'SPSite' could not be found (are you missing a using directive or an assembly reference?)_

I am creating a Winforms application. I need to upload and download a file from Sharepoint.
I have added reference to Microsoft.Sharepoint.Client.
Below is the code to upload file:
using System.IO;
using Microsoft.SharePoint;
private void Button_Click_1(object sender, RoutedEventArgs e)
String fileToUpload = @"C:\Test.txt";
String sharePointSite = "https://myshapoint";
String documentLibraryName = "Test";
using (SPSite oSite = new SPSite(sharePointSite))
using (SPWeb oWeb = oSite.OpenWeb())
if (!System.IO.File.Exists(fileToUpload))
throw new FileNotFoundException("File not found.", fileToUpload);
SPFolder myLibrary = oWeb.Folders[documentLibraryName];
// Prepare to upload
Boolean replaceExistingFiles = true;
String fileName = System.IO.Path.GetFileName(fileToUpload);
FileStream fileStream = File.OpenRead(fileToUpload);
// Upload document
SPFile spfile = myLibrary.Files.Add(fileName, fileStream, replaceExistingFiles);
// Commit
myLibrary.Update();
But i get the error "The type or namespace name 'SPSite' could not be found (are you missing a using directive or an assembly reference?)"
I am not sure what else I am supposed to do here.

Hi,
If you want to develop a WinForm application to be only used in SharePoint Server, we can use Server-Side Object Model(use Microsoft.Sharepoint.dll) to achieve it.
If you want to use the WinForm application to be used both in Server side and Client Side, I suggest you use .Net Client Object Model(use Microsoft.Sharepoint.Client.dll) to achieve it.
Here are two links for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/c357e3c7-37e9-4ded-83aa-a57beae0b0e4/how-to-upload-download-files-to-sharepoint-2013?forum=sharepointdevelopment
http://msdn.microsoft.com/en-us/library/ff798388.aspx
Best Regards
Dennis Guo
TechNet Community Support

The type or namespace name 'SQLite' could not be found (are you missing a using directive or an assembly reference?)

Trying to get sql server compact up and running. I connected to a sqlite database and atuo generated the model.cs code.
however, I get the following error.
Error 1 The type or namespace name 'SQLite' could not be found (are you missing a using directive or an assembly reference?) C:\Users\kenny\Documents\Visual Studio 2013\Projects\WindowsFormsApplication2\WindowsFormsApplication1\Model.cs
3
Any help is greatly appreciated. Please provide some detail as I am novice.
Thanks

Ok so I got the past that problem. I had to add the package System.Data.SQLite Core in Manage NuGet.
Then I changed the auto-generated code "using SQLite" to "using System.Data.SQLite".
But now I have a new problem, it says "System.Data.SQLite.SQLiteConnection' does not contain a definition for 'CreateTable' "
Here is the code
//This code was generated by a tool.
//Changes to this file will be lost if the code is regenerated.
//using SQLite;
using System;
using System.Data.SQLite;
using System.Data.SQLite.EF6;
namespace WindowsFormsApplication2
public class SQLiteDb
string _path;
public SQLiteDb(string path)
_path = path;
public void Create()
using (SQLiteConnection db = new SQLiteConnection(_path))
db.CreateTable<servers>();
public partial class servers
public Int64 server_name { get; set; }
public Double cpu_usage { get; set; }
Any ideas why CreateTable is not available?

The type or namespace name 'PrincipalContext' could not be found

I am attempting to retrieve a user's full name from AD with the code below in .aspx using C#. I am using Sharepoint Designer 2010. I keep getting the error 'An error occurred during the compilation of the
requested file, or one of its dependencies. The type or namespace name 'PrincipalContext' could not be found (are you missing a using directive or an assembly reference?). What am I doing wrong?
@using System.IO;
@using System.DirectoryServices.AccountManagement;
@using System.DirectoryServices;
<%@ Page Language="C#" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
    string fac1;
    string userid;
    string fname;
    string lname;
    string fullname;
    protected void btnShowInfo_Click(object sender, EventArgs e)
        try
            userid = GetHTTPContext();
        catch (Exception ex)
            Response.Write(ex.Message + "<BR>" + ex.StackTrace);
        finally
        using (PrincipalContext context = new PrincipalContext(ContextType.Domain));
                WindowsPrincipal principal = (WindowsPrincipal)User;
                UserPrincipal user = UserPrincipal.FindByIdentity(context, principal.Identity.Name);
                fname = user.GivenName;
                lname = user.Surname;
                fullname = user.Name;
                Response.Write(fname + " " + lname)
    private string GetHTTPContext()
        return(HttpContext.Current.User.Identity.Name);

I was able to fix the error by importing the namespaces and including the assemblies. That got me past the 'PrincipalContext' error.
Now I am getting an error on the line 'UserPrincipal user =...':
An error occurred during the
compilation of the requested file, or one of its dependencies. The name
'context1' does not exist in the current context
Here is the code:
            using( PrincipalContext context1 = new PrincipalContext(ContextType.Domain));
                WindowsPrincipal principal = (WindowsPrincipal)User;
                UserPrincipal user = UserPrincipal.FindByIdentity(context1, principal.Identity.Name);

Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.

We have an SharePoint services 3.0 installation that uses custom web parts on 100s of subsites. The custom web parts on any website is presenting this error
Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.
This past weekend we decided to create a new database server and migrate the databases to the new server in an effort to retire an old box.
INitially we attempted to go through the configuration wizard which didnt do anything but add a new database server to our farm. What we have done is remove the new database server from the farm and use an alias on the SP server to continue to use
the same name but actually get its data from the new database server.
Everything works with the site except these custom webparts.
Any thoughts on where to go to first, should i redeploy what i think are the webparts from VS 2005 (solutions are VS 2005 slns.)?
Tony Spaulding

You need to make Safe Control enteries in your web.config for the particular web application.
Open web.config
Locate the SafeControls Tag
Make a safe control entry
<SafeControl Assembly="Assembly name, Version=1.0.0.0, Culture=neutral, PublicKeyToken=d8eb6481d8b4beec" Namespace="your webpart namespace" TypeName="*" Safe="True" />
In order to find the assembly details, Open the GAC. Right click on your dll and then click properties.

The type or namespace name 'IBM' could not be found (are you missing a using directive or an assembly reference?)

please help on below error
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0246: The type or namespace name 'IBM' could not be found (are you missing a using directive or an assembly reference?)
Source Error:
Line 27: using System.Web.Services;
Line 28: using System.Net;
Line 29: using IBM.WMQ;
Line 30: using System.DirectoryServices.AccountManagement;
Source File: c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\NBO\LogComplaint.aspx.cs
Line: 29

Hello,
>>using IBM.WMQ
It seems you are using third party dll namespace reference in your project but that dll is not being added in project. Please get the IBM.WMQ dll and add it first in your current visual studio project by right click on project-->add reference.
You can place this dll in GAC or can directly add to project as suggested by jaydeep.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

The type or namespace name 'Microsoft.SqlServer.DacServices' could not be found (are you missing a using directive or an assembly reference

Microsoft.SqlServer.DacServices dll is referenced in a unit test project and the compiler is showing an error - The type or namespace name 'DacServices' could not be found.
Although I referenced the dll file in the project visual studio is still errors out as a missing library. I have also tried downloading the file which has the library from http://www.microsoft.com/en-us/download/details.aspx?id=40735
by installing Microsoft Data-Tier Application Framework for SQl Server.
Please shade light on this.
Thanks,
Manny

Hi Manny_R,
According to your description and error message, before you installing Data-Teir Application Framework components, we need to verify if you choose the right version of Data-Tier Application Framework. For more information, see:
http://alexw.co.uk/2013/05/cannot-find-dac-assembly-microsoft-sqlserver-dac-dll/
In addition, Microsoft SQL Server Data-Tier Application Framework requires Microsoft SQL Server System CLR Types, and Microsoft SQL Server Transact-SQL ScriptDom (SQLSysCLRTypes.msi and SQLDOM.msi). You need to install both SQLSysCLRTypes.msi
and SQLDOM.msi.
There is a detail about data-tier application (DAC) features in SQL Server 2012, you can review it.
http://msdn.microsoft.com/en-us/library/cc879339(v=sql.110).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Managed c++ class - The type or namespace name could not be found

Hello,
I have a managed c++ class library project with the following attribute:
<TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
That library is used from a C# project. If I change the C# framework to 4 they both compile fine.
If I set the C# framework to 3.5 the managed C++ class is not recognized and the C# project compilation fails with the following error :
Error XXX The type or namespace name 'XXX' could not be found (are you missing a using directive or an assembly reference?) C:\XXX.cs 19 7 XXX
Any idea about weird behavior? shouldn't it just work?
The C# project is using basic stuff, the same for the C++ project.
Cheers,
Javier Andres Caceres Alvis

Hello there,
After searching for a while I found this: "Everything is ok when I use for example .net 4.5 in c# and c++, but c# must be using 3.5 version. I read that I need to build c++ library in older visual studio (i tried 2005 and 2008)" here:
http://stackoverflow.com/questions/24364687/how-to-import-a-managed-c-library-to-c-sharp-app-target-net-version-3-5
I think that part of that statement is true because when I inspect the added reference (i.e.: the managed C++ project reference -also known as wrapper- from the C# class library) I see in the property tab that the runtime property value is v4.0.30319
-this is very weird, because the managed c++ project is set to compile with v3.5 and the same with the C# project but it seems that if VS2008 or VS2010 is not present then is compiled with the default version.
Thanks,
Javier Andres Caceres Alvis

IDoc type ZSBC316 could not be found

Similar Messages

Maybe you are looking for