Error: Master Copy for Type Definition Could Not Be Found

See screenshot below please. The typedef is there (I navigated to it via windows explorer and it's not greyed out in the code), and my FPGA VI is not broken, which uses the exact same control. I also created these constants by right clicking and choosing create constant, so it's not as if I'm loading the wrong enum. Has anyone seen this before?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.
Attachments:
untitled.PNG ‏30 KB

Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
Here's what I did:
Removed auto-populating folder from project (doubt this mattered, still broken after this)
Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
Just in case the names give any insight, they are:
Older: NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
CLA, LabVIEW Versions 2010-2013

Similar Messages

Error Master Type definition could not be found : FPGA

I am having similar/exact error condition as in the below post..
http://forums.ni.com/t5/LabVIEW/Error-Master-Copy-for-Type-Definition-Could-Not-Be-Found/m-p/1496866...
The *.lvbit file i am using was compiled in Labview 8.2.1 and I am now using 2009 version of Labview. Unlike the suggested solution, recompilation of *.lvbit file is ruled out due to lack of source code access.
Any help towards troubleshooting is appreciated...

Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
Here's what I did:
Removed auto-populating folder from project (doubt this mattered, still broken after this)
Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
Just in case the names give any insight, they are:
Older: NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
CLA, LabVIEW Versions 2010-2013

Upgrade would not install (3.6.8) error message Licence file for this version could not be found

The latest upgrade 3.6.8 downloaded but would not install. Error message read "the licence file for this version could not be found.". Visit Firefox homepage for more info
== I tried to install the latest Firefox upgrade. Have tried about 6 times

It can also help if you delete the Firefox program folder (C:\Program Files\Mozilla Firefox) before installing a new full Firefox copy.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that are locked in any way.
You can skip the step to create a new profile, that is not necessary for this issue.

It is showing as error *Instance of object type PO could not be changed*

HI Gurus,,
i have requirement in PO Change IDOC , i have tested this IDOC .. but it is showing in Status record as error Document is does not exist
and in Segmentheader for E1BPMEPOHEADER ..it is showing as error Instance of object type PO could not be changed
SEGMENT NAME : E1BPMEPOHEADER
PO_NUMBER
COMP_CODE
DOC_TYPE
CREAT_DATE
VENDOR
PURCH_ORG
PUR_GROUP ;;;
we have entered related entries in it ...
am uanble to find out where is porblem lies in it... plz help ASAP ...
Thanks in advance..

HI srinivas
"It seems a data issue, Similar PO might be changed already and thus in SAP it is not allowing to change.
So try changing the test data and post the IDOC again , it will change the PO . "
yes we have entered the PO create and PO change .. where in PO change we have changed only QUANTITY and DATE .
and showing this error" *It is showing as error Instance of object type PO could not be changed. "*
Thanks in advance.

I can't get dvds to play "There was an initialization error. A valid video device could not be found for playback. [-70017] Anybody know how to resolve this?

I can't get dvds to play and, instead, get "There was an initialization error. A valid video device could not be found for playback. [-70017]" I went in for a Genius appt Friday and it played for the tech...but now I'm back home (one and a half hours from the store) and I'm getting the error message again when I try to load a dvd. Any recommendations?

Hello, try this...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Reboot... any change?

Account 'Acc.dep. accnt.for ordinary depreciation' could not be found

Dear Team
I am carrying out asset configuration for a company code ( Chart of depreciation ABJP - Japan )
For dep area 01 - GL posting set as 1 Area Posts in Realtime
other dep area GL posint indicator set as 3 - Area Posts Depreciation Only
in Tcode : AO90 , i configured GL mapping only to dep area 01. Not to other dep area.
When i run depreciation AFAB , system gives me error as " Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 10 "
I am sure that this error because of missing account determination at Tcode AO90 , but i wonder because just i copied parent company code chart of depreciation ( ABUS- US ) settings to this ABCD - Japan , where in no GL mapping done for chart of depreciation level of ABUS .
No error depreication run at AFAB to company code of US. System posting Dep entries only to 01 dep area in case of ABUS
But in my com code system tells GL could not be found at dep area 10
I dont know what is missing at my company code / chart of depreciation
Thanks in advance for your clarification
Regards
ILAN

Hi,
change the Posting Indicator to 0 for the other Dep. area and also check all the configurations of your company code and your parent company code.
Thanks
Goutam

Help please! error code: a valid dvd drive could not be found [-70012]

Hi,
Although I am able to play cds and bootable discs, I am unable to play dvds on my LaCie d2 DVD-RW Firewire Drive. I get an error code:
a valid dvd drive could not be found -70012
Is anyone able to help? I did see one other post listed with this error code, but that person's results seem to be no longer valid, with outdated links for patches.
Thanks,
George

It's possible that you caused some damage by not "properly" doing the firmware update, but drives with bad firmware typically just don't work, period. Unfortunately, LaCie does not keep the older firmware posted on their site so that you could 'back-flash' the drive to an earlier firmware revision and then re-apply the updated firmware.
If you have access to a PC that you could put the drive into (as in, removed from the LaCie external enclosure) and know the drive type (the NEC ND-35xx is the most common) you could find older firmware and flashing utilities for the PC, flash the drive to one of those and then drop it back into the LaCie enclosure and flash it back to the current LaCie firmware. No guarantees this will work, though, and you may end up with a totally dead drive.
-Douggo

O/S-Error: (OS 126) The specified module could not be found.

i get this error in my vb6.0 application...
"O/S-Error: (OS 126) The specified module could not be found.
ROW-00054: Cannot load the library"
Assuming my connection is fine...
DB is oracle 9.2.0.4 patch installed,MDAC 2.8,VB6.0
My code snipped goes like this...
conn.Open "Provider=OraOledb.Oracle;User ID=test;Password=test;DATA SOURCE=oracle.world;UseSession Format=1"
objADOCommand.CommandText = "select * from wfmuser"
objADOCommand.ActiveConnection = conn
adorec.CursorLocation = adUseClient
objADOCommand.Properties("IRowsetChange") = True
objADOCommand.Properties("Updatability") = 7 ' Insert, Delete and Update
Set adorec = objADOCommand.Execute
it gives me the error upon execution of above line.
i have reinstalled the OLEDB provider,as well as MDAC.
but of no help...
i have even cheked my OS path for oraHome entry.
please respond ASAP...i am stuck.

Searching the web for "loadlibrary failed with error 126 java" seems to point to issues with OpenGL and certain video drivers and/or environments with multiple monitors. Here are several discussions...
https://netbeans.org/bugzilla/show_bug.cgi?id=243153
Error "LoadLibrary failed with error 126: The module could not - Microsoft Community
[SOLVED] Issue with Technic Launcher: Load Library failed with Error 126 - Technic Launcher - Technic Forums
So it seems this issue is not specific to SQL Developer. The last discussion includes a video link in its last post saying that ".dll" is searched for rather than "atioglxx.dll" on 32-bit systems or "atio6axx.dll" on 64-bit system (in the C:\Windows\system32 folder), so a workaround is to copy one of those to ".dll".

The song names for this CD could not be found online

I've been trying to copy some of my cds to itunes, but it does not recognize any of the track names. The error message: "The song names for this CD could not be found online. Do you still want to import the songs?"
I've tried with a dozen CDs and is always the same.

iTunes gets track information from Gracenote's database, so iTunes must be able to reach gracenote.com and the CD must have been entered there by some purchaser already (all CD information in Gracenote is provided by we users). If these are common, commercially-distributed CDs, it may be that there is a firewall or privacy filter blocking access to gracenote.com. If these are unusual, independently-released or rare CDs, they just may not be in Gracenote yet. In the case of a custom CD where it's a compilation, Gracenote probably won't be able to identify them (it goes by complete albums, comparing the number and length of the tracks to try and figure out what album it is).
Hope this helps.

The factory profile for the display could not be found.

Whenever I try to color calibrate my Mid 2010 iMac I get the error message "The factory profile for the display could not be found". When you look at the profile settings for the display a color sync profile is set, but the setting for the factory profile is blank. I know where the color sync profiles are stored but it seems to me that the display has lost the setting to the factory profile. Can anyone tell me what the default factory profile setting should be? and how do you restore the setting? (note: I seem to have all the ICC files, it's the default factory setting itself that is missing)

There seems to be a lot of posts about this issue dotted around the net with no-one able to come up with a solution. So I found a solution myself! =P
1) Download a copy of Plistedit Pro. It's shareware, so donate!
2) Edit /Library/Preferences/.GlobalPreferences.plist (you will need to create a copy of the file, edit the copy and then copy back)
Using the plist editor find the coloursync entry for your device and simply edit the factory default entry to point to a valid colorsync profile file (.icc).
I can now colour calibrate my iMac again. Phew!!!

ErrorAccount 'Acc.dep. accnt.for ordinary depreciation' could not be found.

Hi,
When I am trying to retire an asset by scrapping using TCODE ABAVN I am getting the following error.Ho do I resolve this.
Thanks.
Account 'Acc.dep. accnt.for ordinary depreciation' could not be found.
Message no. AU133
Diagnosis
When creating the accounting document, the system could not find account 'Acc.dep. accnt.for ordinary depreciation' for company code INST.
Procedure
Enter this account in the account determination for Asset Accounting.

Hi Manju,
First set your COD with OAPL.
Then go to transaction AO90 and select your COA and double click on account determination and select your account determination key, which is assigned to your retiring asset's asset class, and double click on depreciation
In the next screen, enter an B/S recon GL account in the field called Acc.dep. accnt.for ordinary depreciation, which will be used to capture the accum ord dep for your assets.
This will fix your issue.
Thanks,
Srinu

AU133 - Expense Account for Ord Depreciation could not be found for Area 58

Hi
I am working on ECC 6.0 Version. While running Depreciation AFAB in one our company codes, I am facing the Error No. AU133, Expense Account for Ord Depreciation could not be found for Area 58.
Whereas there is no this error for our Book Depreciation Area 01.
I have checked all the Accounting Assignments settings in AO90 and AO93. They are correctly maintained. I have no clues how to go about it.
I have also checked whether the Depreciation and Acc. Dep GLs are maintained as recon account. But they are correct only.
Please suggest any solution as we have to close the period.
Gemini

Same problem after upgrade from 4.6c.
The solution was to create the depreciation accounts in the company code - kind of strange, since all depreciation postings must be made as cross-company postings to a cc that (obviously) has the account and since it worked in the old "RABUCH"- version. It seems to be ok to just create the accounts and then block them for posting (to avoid posting to them by mistake).

When I attempt to import some regular, commercial CD's, iTunes returns the message "The song names for this CD could not be found online. Do you still want to import the songs?" This has happened for four CD's in a row now, Eagles - Hotel California.

Hi All,
When I attempt to import some regular, commercial CD's, iTunes returns the message "The song names for this CD could not be found online. Do you still want to import the songs?" This has happened for four CD's in a row now. Today, after importing some other CD's in the regular way, all of a sudden, iTunes won't recognize the Eagles - "Hotel California" CD, the Eagles "**** Freezes Over" CD, "The Best of Roy Orbison" or "Milestones" by Miles Davis.
What happened? Anybody know?

We've gotten the same error at the same time. I guess we need to let this play out. In the meantime, I'm gonna update iTunes.

HT1473 iTunes message saying the song names for this cd could not be found online when it's iTunes store, What's up with that?

I just purchased The Very Best Of Eagles CD, Popped it into my drive so excited to own the copy but when I tired to copy it to my Library I get this message saying the song names for this cd could not be found online when it's in the iTunes store, What's up with that? Is there any way to get track information and artwork without Having to manually inter all the info?

iTunes gets track information from Gracenote's database, so iTunes must be able to reach gracenote.com and the CD must have been entered there by some purchaser already (all CD information in Gracenote is provided by we users). If these are common, commercially-distributed CDs, it may be that there is a firewall or privacy filter blocking access to gracenote.com. If these are unusual, independently-released or rare CDs, they just may not be in Gracenote yet. In the case of a custom CD where it's a compilation, Gracenote probably won't be able to identify them (it goes by complete albums, comparing the number and length of the tracks to try and figure out what album it is).
Hope this helps.

Home sharing problem - "copy of the file could not be found"

Hi all - I just tried to load about 2700 songs via home sharing from my old laptop to my current one. At the end of the import, it showed that about 1200 songs did not import because "a copy of the file could not be found", something like that. To give some context, I quickly scrolled through the songs that would not import, and all the ones I saw were songs I grabbed off of file sharing networks when i was in college years ago. Thanks for any support - Dan
PS Both are windows OS, the new computer using windows 7 and the old one maybe xp or something.

Normally the cause of this is misplaced or missing files. The iTunes library displayed in iTunes is based on information stored in its library file. One piece of this information is where the actual music file for each song is stored on your system. If the actual music file (*.mp3, *.mp4, etc.) has been moved or deleted manually then iTunes can't find the actual file that contains the music. In iTunes select Get info for these files and see where iTunes thinks they are stored. If the files aren't in that location then that's your problem. If the files have been moved then consolidating your iTunes library may be a good solution. You should read iTunes help on that operation. If the files have been deleted then they are gone and you can delete the song from iTunes. That won't get your music back but it will tidy up your iTunes library.

Error: Master Copy for Type Definition Could Not Be Found

Similar Messages

Maybe you are looking for