IDOCs Distribution Model: filter whitout Filter group

Hi guys!
In my IDOCs distribution model of IDOCs with Message Type "Z", when i try to add a Filter, in the popup dialog to enter the Filter group i canot see nothing...only a line with a "Dependent on class membership: Requires classes to be defined in the sending system"
but not show the expected fields like Sales organization, or the Account group
¿this is a custonizing problem?
Best Regards,
Antonio

Hi,
First, create ALE Filter objects via BD95 (if they do not exist yet)
Secondly, assign ALE Filter objects to your message type for the appropriate segment: BD59
Then, run bd64 ...
Regards,
Jakub

Similar Messages

Distribution Model Filter - BD59 question

Hi,
if you have a look at BD59 (assign Objecttyp) for example "CREMAS", why is ALE-Objecttyp "MSGFN" used ?
MSGFN is filled in several Messagetypes "but" not showing in distribution model filter.
What is the use of MSGFN as Ale Objecttyp ?

Hello,
The Field MSGFN is a Qualifier / Action Code / Action Field which need not be mandatory. So, probably thats the reason why is not showing up.
Thanks and Regards,
Venkat Phani Prasad Konduri

Specific IDoc + Distribution Model = pb of filter

Hi,
I created a Message Type "ZHRMD_A" and an extension "ZEXT", and I use the standard IDoc type HRMD_A06. Thus my Idoc is: ZRMD_A.HRMD_A06.ZEXT
All work fine: my ECC send correctly this idoc with the good values...
But my problem is inside the Distribution Model (BD64): I haven't the line "Data filter active" under my Message Type ZHRMD_A, so I cannot add filter !
Can I add filter on a specific Message Type?
if yes, how?
any idea is welcome.
Regards
Mickael

Hi,
u can use the tcode- BD56 for segment filtering.Also check for BD95.
Regards,
Nagaraj
Message was edited by:
nagaraj kumar nishtala

ALE/Idocs Distribution Model

Hi
I am facing one problem in distribution model. Im trying to send idocs from one system to another. The distribution model has been created and been distributed to the other system. so no error comes in the source system. Even the idocs are generated without error.
Now in the receiving system,
1) after the distribution model is created in this system by distribution option from the source system and when i try to generate the partner profile in this system. It gives the error that " No messages have been defined for the selection conditions in the model". Though everything is created here.
2) the idocs reaches in this system but in error state. Again the error says partner not found.
Now am not able to understand how to rectify this problem. when the model is distributed why this partner is not being created automatically.
can anybody help???
regds
sanjeev

This is the error that comes when I run the FM (FM is active) contrary to the error:
Runtime Errors         CALL_FUNCTION_NOT_ACTIVE
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          20.11.2007 12:13:39
Short text
     The function module is not active or contains no code.
What happened?
     The function module "ZIDOC_INPUT_ZADR_MESSAGETYPE" is called, but
     cannot be found in its function group.
     Error in the ABAP Application Program
     The current ABAP program "ZIDOC_INPUT_ZADR_MESSAGETYPE==FT" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
      not caught in
     procedure "FUNCTION_CALL" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The program "ZIDOC_INPUT_ZADR_MESSAGETYPE==FT" contains the CALL FUNCTION
      statement.
     The name of the function module to be called is "ZIDOC_INPUT_ZADR_MESSAGETYPE".
   but "ZIDOC_INPUT_ZADR_MESSAGETYPE" cannot be found in its function group.
   Possible reasons:
   a) The function module "ZIDOC_INPUT_ZADR_MESSAGETYPE" has not been activated.
    Therefore,
      it cannot be found at runtime.
   b) The Function Library contains an incorrect entry for
    "ZIDOC_INPUT_ZADR_MESSAGETYPE".
   c) The function module contains no code, even FUNCTION ... ENDFUNCTION
      is missing.
Missing RAISING Clause in Interface
    Program                                 ZIDOC_INPUT_ZADR_MESSAGETYPE==FT
    Include                                 ZIDOC_INPUT_ZADR_MESSAGETYPE==FT
    Row                                     69
    Module type                             (FORM)
    Module Name                             FUNCTION_CALL
Trigger Location of Exception
    Program                                 ZIDOC_INPUT_ZADR_MESSAGETYPE==FT
    Include                                 ZIDOC_INPUT_ZADR_MESSAGETYPE==FT
    Row                                     93
    Module type                             (FORM)
    Module Name                             FUNCTION_CALL
Source Code Extract
Line SourceCde
   63 *
   64 DATA: OTHERS(1).
   65 *
   66 FORM EXISTENCE_CHECK CHANGING VARIA.
   67   VARIA = 1.
   68 ENDFORM.
   69 FORM FUNCTION_CALL.
   70   CLEAR %_OWORKFLOW_RESULT.
   71   CLEAR %_OAPPLICATION_VARIABLE.
   72   CLEAR %_OIN_UPDATE_TASK.
   73   CLEAR %_OCALL_TRANSACTION_DONE.
   74   CLEAR %_OIDOC_CONTRL.
   75 %_OIDOC_CONTRL = %_IIDOC_CONTRL.
   76   CLEAR %_OIDOC_DATA.
   77 %_OIDOC_DATA = %_IIDOC_DATA.
   78   CLEAR %_OIDOC_STATUS.
   79 %_OIDOC_STATUS = %_IIDOC_STATUS.
   80   CLEAR %_ORETURN_VARIABLES.
   81 %_ORETURN_VARIABLES = %_IRETURN_VARIABLES.
   82   CLEAR %_OSERIALIZATION_INFO.
   83 %_OSERIALIZATION_INFO = %_ISERIALIZATION_INFO.
   84 * TRANSAKTION = 'Repo', PROGRAM = REPORT
   85   IF ATRA = '1'.
   86     SET RUN TIME ANALYZER ON %_INTERNAL.
   87   ENDIF.
   88 IF DESTI IS INITIAL.
   89 IF DEBUG = '1'. BREAK-POINT AT NEXT APPLICATION STATEMENT.
   90 ENDIF.
   91 DEBUG = SPACE.
   92 GET RUN TIME FIELD TIME1.
>>>>> CALL FUNCTION 'ZIDOC_INPUT_ZADR_MESSAGETYPE'
   94 EXPORTING
   95 INPUT_METHOD = %_IINPUT_METHOD
   96 MASS_PROCESSING = %_IMASS_PROCESSING
   97 IMPORTING
   98 WORKFLOW_RESULT = %_OWORKFLOW_RESULT
   99 APPLICATION_VARIABLE = %_OAPPLICATION_VARIABLE
100 IN_UPDATE_TASK = %_OIN_UPDATE_TASK
101 CALL_TRANSACTION_DONE = %_OCALL_TRANSACTION_DONE
102 CHANGING
103 IDOC_CONTRL = %_OIDOC_CONTRL
104 IDOC_DATA = %_OIDOC_DATA
105 IDOC_STATUS = %_OIDOC_STATUS
106 RETURN_VARIABLES = %_ORETURN_VARIABLES
107 SERIALIZATION_INFO = %_OSERIALIZATION_INFO
108 EXCEPTIONS
109 WRONG_FUNCTION_CALLED = 001
110 ERROR_MESSAGE = 002
111 OTHERS = 003.
112   IF ATRA = '1'.

Error in IDOC Distribution Model

HI all ;
Please Help me in this Issue!!
am working with standard IDOC Using MATMAS (Material Master Transfer)
LS_800 - Outbound.
LR_810 - Inbound.
--> BD54.
--> SCC4.
-->SM59.
-->WE21.
-->WE20.
--> WE20 ( in inbound side) Clear Up to this level.
After that the Problem in Distributing the Model,,,,
In Bd64 t-code Distribution Model.
while Generating the Partner Profiles in BD64 ;
its giving the blank message like below.
No message has been defined for the selection conditions in the model.
when we distribute(in BD64) 2 Errors (red) Like Below;
RFC destination for Syncronous Communication (Message type SYNCH)
Partner Profile LS LR_810 SYNCH does Not Exits.
Generate Partner Profile.
or Specify outbound partner Profile for message type SYNCH
RFC destination for Syncronous Communication (Message type SYNCH)
Partner Profile LS LS_810 SYNCH does Not Exits
Generate Partner Profile.
or Specify outbound partner Profile for message type SYNCH
Thannks;
Upender.

In Bd64 t-code Distribution Model.
create the model view ,
add message type Matmas to it.
-> select the model view
->environment-> generate partner profiles
In Partner Profiles u hv to maintain the Outbound parameters in Both LS_800 &
LR_810 .
in receiver port, double click & make sure that the rfc destination assigned connects successfully..
Regards.

Filters in Idoc distribution Model

Hi All,
We are using message type: HRMD_A to distribute HR master data changes to middleware system. Now my requirement is that i should send changes pertaining to US employees alone.
Do i need to create filter group for IT0001 in BD64 where i need to maintain set of personnel areas assigned to country grouping: 10 - US. or any other approach. Please let me know. Thanks in advance.

Hi,
try to define filters in BD95 tcode and then assign filter to message type in BD59 tcode , then configure the filter in BD64 and then distribute.. see if it works.
Regards,
Nagaraj

Inbound idoc- distribution model

Hi,
    Is it mandatory to create distribution model for inbound idoc processing?

Hi all,
        Mine is inbound scenario.
        Sender is XI system
        Receiver is R/3 system.
        Do i need to maintain distribution model for this?
1.As per my knowledge, distribution model is only created in outbound scenario? In inbound scenario why distribution model is not created?
2.On the outbound side, after generating partner profiles we get SYNCH SYNCHRON in outbound partner profile. My question is there any setting to generate partner profiles on inbound side also?
or else SYNCH SYNCHRON will be for only outboud?
Please clarify........

Idoc : distribution model

Dear all,
I m getting following error during distribute model view....
Model view MODEL1 has not been updated
Rreason: Distribution model is currently being processed.
Please help me

HI,
The distrobution model is being used by some other application, so please create a new distribution model and try.
Regards
Sathish

MDG-F - Replication model for Cost Center Group

Hello
We are trying to create IDOC replication model for Cost center group IDOC_COSTG for data model 0G (MDG 7.0).
When trying to assign "Outbound Parameter" = SEND_DELTA_INFO against outbound implementation 1112, we are getting error message saying : "Entry 1112 SEND_DELTA_INFO does not exist in DRFC_PARO (check table)".
While checking table DRFC_PARO via SE16, it shows all the entries for 1012 (GL mast), 1102 (cost center) but it is missing entry for 1112 (cost center group).
What are we missing? How to generate entry in this check table DRFC_PARO? which step is creating this entry?
Thanks
Luo

Hello Luo
You have to maintain this entry in following table -
Go to SM30. Give table name - DRFV_PARO and click on maintain. You will get a pop-up for outbound implementation. Give 1112 and proceed. Add the send_delta_info in the table, save it and then add it in DRF. Do add package_data so that you can send multiple cost centers in your target system.
Kiran

Query related to filter group on matnr created in ALE distribution model

Hi All,
I have query related to filter group on matnr created in ALE distribution model.
I have created a filter group on matnr in ALE distribution model and put the value E* ( purpose is that all the material number started with E should be triggered in case of any changes in the material).But it is not working.
Can anybody suggest the solution for this i.e how to capture E* value for the material master changes and should trigger idoc using change pointer using BD21.
Thanks & Regards
Prabhat

Unfortunately, you cannot filter using wildcards or exclusions. You have to explicitly list each allowed value in its entirety.
In my opinion, the simplest solution would be to copy function MASTERIDOC_CREATE_SMD_MATMAS, modify it to handle your custom filtering and update the message type entry in transaction BD60.

How to create a data filter for BAPI used in a Distribution Model ?

I am trying to create IDOC's for a QM inspection plan via message type QPMK in ECC 6.0. When creating the new message type in the Distribution Model, it forced me to use a BAPI (MasterInspectionChar) rather that just the message as I have done in the past. In order to ensure that only IDOC's related to a specific plant and material type get sent out, I was trying to create a filter.
I am able to get into a 'Change Filter' dialog by double clicking 'No data filter set' under the node 'MasterInspectionChar.SaveReplica'. However, an attempt to highlight anything on this dialog and clicking button 'Create filter group' results in msg. 'Select node: Content-dependent parameter filtering'.
Online help led me in a different direction, one thread led me to believe I needed to create a table entry for the filter in table TBD16 via BD81 for later attachment to the BAPI in the Distribution Model. Before this, I created two Z* ALE Object Type records for plant and material type in table TBD11 via BD95 for what I thought would provide a lookup back in BD81 for creation of a new filter record, but these objects are not found. Per the help, I am also unclear as to whether I would need to set up Receiver determination or Parameter filtering, nor where to make this step in the configuration happen?
Can anyone point me back in the correct direction to get a data filter set up for this BAPI within the Distribution Model ?
Thanks - Mike

Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'. But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter.
I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'. Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI. Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning. Is this warning occuring because of missing configuration?
Thanks - Mike

Filter subtypes in distribution model

Hi,
we are using change pointers and the report RBDMIDOC to create Idoc HRMD_A from those change pointers, in order to send that data to an external payroll.
We already filter some infotypes in the distribution model, but we want to filter some subtypes too.
Is this possible?
Thanks.
Sónia

Hi Sonia,
In BD59, mention the message type you want to set the filtering for segments.
Suppose there is no entry for the segment u want to filter off, add that segment there. Then you can create a filter group for the model in BD64.
If this is useful, award points pls..
Regards,
Bharadwaj

Adding a Filter in a distribution model

Hi Experts,
I need to add few fields in my IDOC segments as a filter in distribution model.
and i need to set certain values to these fields.
Can anyone plesae tell me step by step procedure how to add the filter in distribution model?
Regards,
Ashish

Hii..Ashish..
These are the Steps to Implement Data Filtering in ALE.
Filter Objects: These are the Fields based on which you define The Conditon.
For eg: Matnr, Mtart...
1. Create a Filter Object (If it is not available for ur Requirement)
 Tcode: BD59
 New Entries:
 ALE Filter Object type : MBRSH (Industry Sector)
 Segment type : E1MARAM
 Segment field : MBRSH
 Save.
2. Link the ALE Filter Object type to the Table field in DDIC
 Tcode: BD95
 New Enries:
 ALE Filter Object type : MBRSH (Industry Sector)
 Table Name : MARA
 Table field : MBRSH
 Save
3. Creating Data filtering using this Filter Object type
 Tcode: BD64.
 Expand ur Model view.
 Under the Message Type MATMAS
 Double click on No Data filter / Data filter Active.
 Create a Filter Group.
 It will list out all the Filter Objects of the Message type:
 (you should find the New filter Object type)
 Double Click on the Filter Object type MBRSH .
 Assign the Filter values
 Save.
Reward if Helpful

Find distribution model in source system and maintain filter in it

I have an inbound idoc which is in status 51(error). The procedure shown by SAP is following:-
It has been determined that the particular employee 11001189 has been received for the first time.
Maintain the filter of the appropriate distribution model. To do this, call transaction BD64 in the source system.
Add new filter group to the data filter. Assign values to it.
I cannot find the distribution model. Please somebody help me in finding the relevant distribution model in the source system. One more thing, when I went to BD64 I found that some of the model views were in grey shade while others were in bold, please tell me why is it so.
Please give me some hint.

I have an inbound idoc which is in status 51(error). The procedure shown by SAP is following:-
It has been determined that the particular employee 11001189 has been received for the first time.
Maintain the filter of the appropriate distribution model. To do this, call transaction BD64 in the source system.
Add new filter group to the data filter. Assign values to it.
I cannot find the distribution model. Please somebody help me in finding the relevant distribution model in the source system.
You never maintain Filters in receivin system those has to me in sender system. Also you
need to distribute the Model from sender to receiver once you model is finalized thru menu
option in sender system. Find the Models with HRMD_A as message type
One more thing, when I went to BD64 I found that some of the model views were in grey shade
while others were in bold, please tell me why is it so
simple, If its greyed out then this model is maintained in some other system and is
just distrinuted over to this system, you shuld not maintain the greyed out entries as Maintaince
system is different. The non grey entires are those for which its same system in which the model
is created

Filter groups for outbound Vendor master , customer master idocs

I need to create Vendor , Customer IDOCS CREMAS and DEBMAS only when the user changes the company code . I do not want the IDOCS to be produced when any other fields change.
I am able to achieve the same using filter groups for Cost Center but not for Company Code.
Thanks,
Teresa

try BD52,

IDOCs Distribution Model: filter whitout Filter group

Similar Messages

Maybe you are looking for