IDVD09 Multiplexing Error formating disk, when saving to a disk image

I am able to burn a disk but when I to to save a disk image, after four hours of churn, when it goes to write the image, I get " Multiplexing error in formating disk" and iDVD quits. This is a real pain and very time consuming and happens every time I try to save a disk image from the project. Any ideas on how to get around this would be appreciated.

I am up to latest software 10.5.6/ I am saving disk image to internal 450 GB drive. I found that I was suprisingly low on empty space (14GB) that might have been my problem. I recently uloaded a buch of video (like almost 3 hours, did not realize how close I was to being ful!I will post here tomorrow after I go the 5 hours again to make another pass at the Disk image!

Similar Messages

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?

hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

"Time machine error, The disk image cannot be mounted" What can I do??

I ran the time machine. Then, "preparing backup" showed up for a long time. After that, a window pop out: "Time machine error, The disk image cannot be mounted" What is disk image? What can I do (I can't back up anything)
P.S. I use time capsule for backup. there were no problem on connection

I'm having the same issue. I do not have TC as my base station. It says right in the book that if you choose, you do not have to have it run as your router, just as a part of your existing wireless network. All software is up to date and I have already shortened the name of both my TC and TC disc to 6 characters and no spaces! I've already spoken with someone today about this. He really didn't know. Have tried backing up both wirelessly and directly connecting with an Ethernet cord. I had to finally call because when I attempted to register the product to get online support, apple.com didn't recognize the serial number!!! The gentleman on the phone got it registered for me. I bought the TC from an official apple store and for whatever reason when he put in the serial number his computer said that this TC was so "old" I guess that there was technically "no support." That basically means that even though my parents just purchased this for me a week before Christmas, that it was made a year ago and the warranty is not good?? I need to do more research on that. Right now I am very unhappy about this. I am a firm apple user and have been for years, but this is frustrating.
I had read somewhere else (not sure I've been searching apple for what seems like forever now) to make sure that the TC was showing up in "devices" of the Finder. Mine doesn't show up there, but rather in the "Network" window. Is this an issue? If it is, can anyone tell me how to fix that. I have Time Machine backing up to my TC, so I do not see why it would be.
UPDATE: I just opened up my TC on the "Shared" section of the Finder window and deleted the old "sparsebundle" (I had no clue that anything had backed up way back at 3:30pm on Dec 29) and now I get a slightly new message: Time Machine Error: The backup disc image could not be created." So now the word "mounted" is replaced with "created." This error showed up a lot sooner than the original one. Ok, no clue. I am going to try to Change the Disc again, and try again. I will post another update.
Message was edited by: kryzma

Time Machine error: backup disk image could not be created

Iet up my new time capsule day and it's working great. Now that I've got everything sorted out, I'm ready to do the initial time machine back up on it. I went into preferences, changed the backup location to my TC and clicked 'back up now'. Very quickly I get a message that the backup failed: "Time Machine Error - The backup disk image could not be created".
I've searched the apple support area but haven't been able to figure this one out. Can anyone help, please? This is an initial backup. (FYI, it worked great on my old external drive.)
Many thanks

I had the same problem. I installed my Time Capsule, fired up Time Machine and got an error that said "The backup is too large for the backup volume. The backup requires 436.8 GB but only 182.2GB are available."
Coincidently, these are the same sizes as the space used and the space available on my iMac's drive.
I looked in /Volumes and saw that the sparsebundle was being created on the local disk and not on the main disk. Trying to backup again gave me the "Time Machine error: backup disk image could not be created." message.
I poked around the forums, and found a post about the machine name setting in sharing. I decided to give it a look, and lo and behold, I did not have a machine name. So I gave my box a name, kicked off Time Machine again, and it worked.

HT3275 Time machine error, backup disk image "/volumes/data-1/.sparesbundle " already in use. I don;t know what this means, can someone help?

My Mac mini time capsule is showing an error Time machine error, backup disk image "/volumes/data-1/.sparesbundle " already in use. I don;t know what this means, can someone help?

I had a similar problem and I solved it as follows -
In Time Machine - > I deselected time capsule Data Disk as a destination.
Then I pulled the power plug on the Time Capsule, twiddled my thumbs for 15 secs, plugged the power back in.
Went back t Time Machine -> Re-Added the Time Capsule Data Disk as destination. And then tested by selecting Backup Now.
All went well and the backup picked up from before the problem.
BTW - I also have a USB drive connected to Time Capsule that is an alternate disk for Time Machine to backup.
In Mountain Lion the GUI lets you add more than one Time Machine backup destinations very easily so I think it a good idea to have redundancy.
Hope this helps.

CS6 Pshop - Alerts at startup; "All Readable Documents" not defaulting at opening; Format in file name not same as Format list when saving file

Just downloaded CS6 Design Standard. System - OS10.6.8 (about to upgrade to 10.8), iMac 27 i5Intel 4core 12GBram 2.66Ghz
As Pshop opens, I get three alerts...
1 - Could not load Enable Async I/O module because does not work with this version of Photoshop
2 - Could not load Multiprocessor Support module because does not work with this version of Photoshop
3 - Could not load FastCore Routines module because does not work with this version of Photoshop
Then asks if I want to be connected to internet or something like that. Then Pshop opens even before I click OK
None of these happened with CS5.5
I realize CS6 is 64bit. I have CS5.5 set at 32bit because of plugins.
Two issues I've noticed so far with CS6.
1 - As I open a document, the Enable selections drop down at bottom of window is not set on anything. I have to always select the All Readable Documents. Not the case in CS5.5 which was always default at All Readable Documents. Could not find anything in Prefs to this issue.
2 - When saving a document, whether RGB or CMYK, the drop down Format selections are not accurate. The first three or four do read correctly as correlating with the suffix (.jpg .tif etc) in the file name at top of window. But then the subsequent format selections below third or fourth one read as the one above it in the list.
eg: as RGB file: Saving through BMP indicates same in file name at top (.bmp). However, the next choice below that, Gif, still shows as .bmp in file name at top. And so on to bottom of list. Same with CMYK file.
Never saw this in CS5.5.
When I initially installed CS6, I noticed only item in the Plugins folder was Panels folder.... no other plugins. I thought this to be a download error of some sort and dragged basic plugins from 5.5 into 6 Plugins folder. Could this be the problem? Otherwise, I would have NO plugins in CS6
I have downloaded CS6 twice now thinking the first was corrupted. I used both download options on Adobe page - Akamai and standard
Same issues with both. One response stated this all to be a plugins problem. I have uninstalled "after market" plugins from both 5.5 & 6 SuperBladePro was the only one. Restarted CS6. Still same problems. Only items in Plugins are what came with program.

I owe an apology to the previous responder Chris C, to this issue. I misread his solution thinking he meant I needed to delete ONLY the "additional" plugins like SBPro. Which I did. But rereading, I see he meant ALL the plugins I dragged from 5.5 because the 6 plugins folder was empty.
I thought it was corrupted in download. So if you guys get points for solutions, be sure Chris gets a few since I responded saying it did not work.
In fact, after removing the 5.5 plugins from 6, everything is working fine.
Plus I didn't know the 6 plugin folder was for the "after markets" like SBPro which is good to know.
Also thanks for the fairly quick response. I'm typically dubious about forums as troubleshooting solutions.
Kinda like sending a message in a bottle out to sea. Never know when it's coming back.
Sometimes issues are urgent. Your response team has encouraged me greatly :-)
But still bummed that Chats do not support CS6 however.

I'm getting multiplexing error in iDVD when trying to burn.

Trying to finish an iDVD within 4 hours. I'm getting a multiplexing error when burning. It's a slide show with 429 pictures, background music and no movies.

Hi
You are aware of that - SlideShow function in iDVD has some limitations.
• 99 Photos per SlideShow (and You can have 99 of these)
• one audio tune (but You can make a special audio file/track including several Music parts - but as one track)
on MultiPlex Error - I've made a long long list - as this is a very complex error
Multiplexing Error
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Error in BP when saving a transaction type

Hi Gurus!!! first of all merry xmast!!!
I need you help since I cannot see where the error is. I am using CRM 7.0 and in the UI when saving a transaction I get the following errors "The region 00 is not defined for country" and "The country is not set". I have made the following verifications:
UI
--> Assingment Block: Parties involved I have checked that both the customer and employee responsible have the country and region
--> The transaction type used does not have the field "country".
GUI
--> PPOMA_CRM: I checked that the organization has the country set.
-->BP :I double checked that the BPs customer and employee responsible have the country and region assigned.
What`s wear is that I seem to be the only one who has this error so I`m reallly confused on how to solve it.
Please help me,
Thanks a lot!!!
Regards,
Lorena.

Hi,
Is this happening for all the types of Transactions like Sales, Service, etc.? Is that data that you are using is proper? And can you check if the countries are properly maintained in the system? Check if the country is a mandatory parameter or some country specific checks are executed in the system.
You can check for the countries in the System from transaction code - SPRO -> SAP NetWeaver -> General Settings -> Set Countries -> Specify Countries for mySAP Systems.
Hope this will help.
Thanks,
Samantak.

Photoshop CS4 Is Not Showing all Formats/Extensions when saving. [was: Please Help]

My Adobe Photoshop Cs4 Is Not Showing all Formats/Extensions.
when i edit a picture and wants to save in .png or .bmp or in any other format ...
there is no .png In the Save As List, There are only Some Extenstions in that list like Jpeg-Psd-Tif etc...
I Made The Picture in RGB mode..
And I have Png.8bi Present In my AdobePhotoshop/Plugins/File Formats
But It Is Still Not Showing Can you guys help

Thanks For The Reply ... Let Me Answer your questions
Os = Windows ( windows xp )
Bits = 8 bits / Channel
I didn't Understand your this question
=> If On Windows is it the same in both the 32 and 64 bit versions of Photoshop cs4?
System Info :-
Adobe Photoshop Version: 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 1
Processor speed: 1394 MHz
Video Card: Intel(R) 82845G Graphics Controller
Video Mode: 1152 x 864 x 4294967296 colors
Video Card Driver: ialmrnt5.dll
Driver Version: 6.13.01.3264
Built-in memory: 2046 MB
Free memory: 1497 MB
Memory available to Photoshop: 1586 MB
Memory used by Photoshop: 70 %
Image cache levels: 4
Serial number: 92628791954238016438
Application folder: D:\CS4\Photoshop CS4\
Temporary file path: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 39.1G, 32.0G free
Primary Plug-ins folder: D:\CS4\Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2008/08/27-18:10:41   53.355610   53.355610
   AdobeLinguistic.dll   Adobe Linguisitc Library   4.0.0
   AdobeLM.dll   AdobeLM   3.0.11.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   AdobeLM_libFNP.dll   FLEXnet Publisher (32 bit)   11.5.0.1 build 57427
   AdobeOwl.dll   Adobe Owl 2008/08/14-18:38:42   2.0.70   53.354161
   AdobeOwlCanvas.dll   Adobe Owl Canvas   2.0.70   53.354161
   AdobePDFL.dll   PDFL 2008/08/20-20:15:08   53.204060   53.204060
   AdobeUpdater.dll   Adobe Updater Library   6.0.0.1452 (BuildVersion: 52.338651; BuildDate: Wed Apr 16 2008 19:28:20)   52.338651
   AdobeXMP.dll   Adobe XMP Core   4.2.2   53.352624
   AdobeXMPFiles.dll   Adobe XMP Files   4.2.2   53.352624
   AdobeXMPScript.dll   Adobe XMP Script   4.2.2   53.352624
   adobe_caps.dll   Adobe CAPS   2,0,99,0   2.135373
   AFlamingo.dll   AFlamingo 2008/07/09-11:28:44   53.350580   53.350580
   AGM.dll   AGM 2008/08/27-18:10:41   53.355610   53.355610
   ahclient.dll    AdobeHelp Dynamic Link Library   1, 3, 12, 0
   aif_core.dll   AIF   1.0   53.352475
   aif_ogl.dll   AIF   1.0   53.352475
   amtlib.dll   AMTLib   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   amtservices.dll   AMTServices   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   ARE.dll   ARE 2008/08/27-18:10:41   53.355610   53.355610
   asneu.dll    AsnEndUser Dynamic Link Library   1, 6, 0, 8
   ATL80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   authplay.dll
   AXE8SharedExpat.dll   AXE8SharedExpat 2008/06/11-20:19:53   NFR 53.348206   53.348206
   AXEDOMCore.dll   AXEDOMCore 2008/06/11-20:19:53   53.348206   53.348206
   Bib.dll   BIB 2008/08/27-18:10:41   53.355610   53.355610
   BIBUtils.dll   BIBUtils 2008/08/27-18:10:41   53.355610   53.355610
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2008/08/27-18:10:41   53.355610   53.355610
   data_flow.dll   AIF   1.0   53.352475
   ExtendScript.dll   ExtendScript 2008/07/17-13:28:24   53.351316   53.351316
   FileInfo.dll   Adobe XMP FileInfo   4.2.2   53.352624
   FNP_Act_Installer.dll   FLEXnet Publisher (32 bit)   11.6.0.1 build 60959
   icucnv36.dll   International Components for Unicode 2008/03/20-16:33:10    Build gtlib_1.1 CL#7223
   icudt36.dll   International Components for Unicode 2008/03/20-16:33:10    Build gtlib_1.1 CL#7223
   image_flow.dll   AIF   1.0   53.352475
   image_runtime.dll   AIF   1.0   53.352475
   JP2KLib.dll   JP2KLib 2008/06/11-20:19:53   53.100857   53.100857
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   mfc80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80CHS.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80CHT.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80DEU.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80ENU.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80ESP.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80FRA.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80ITA.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80JPN.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80KOR.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80u.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfcm80u.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   MPS.dll   MPS 2008/07/07-10:33:04   53.350311   53.350311
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS4   CS4
   Plugin.dll   Adobe Photoshop CS4   CS4
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   1.0.0.73
   PSArt.dll   Adobe Photoshop CS4   CS4
   PSViews.dll   Adobe Photoshop CS4   CS4
   registration.dll   Registration   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   SCCore.dll   ScCore 2008/07/17-13:28:24   53.351316   53.351316
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   VersionCue.dll   Adobe VersionCue   4.0.0.0client1
   WRServices.dll   WRServices Friday May 30 2008 7:18:42   Build 0.7713   0.7713
Installed plug-ins:
   ADM 3.11x01
   Accented Edges 11.0
   Angled Strokes 11.0
   Bas Relief 11.0
   Chalk & Charcoal 11.0
   Charcoal 11.0
   Chrome 11.0
   Colored Pencil 11.0
   Conté Crayon 11.0
   Craquelure 11.0
   Crosshatch 11.0
   Cutout 11.0
   Dark Strokes 11.0
   Diffuse Glow 11.0
   Dry Brush 11.0
   Embed Watermark 3.0
   Film Grain 11.0
   Filter Gallery 11.0
   Fresco 11.0
   Glass 11.0
   Glowing Edges 11.0
   Grain 11.0
   Graphic Pen 11.0
   HDRMergeUI 11.0
   Halftone Pattern 11.0
   Ink Outlines 11.0
   Lens Blur 11.0
   Lens Correction 11.0
   Liquify 11.0
   Mosaic Tiles 11.0
   Neon Glow 11.0
   Note Paper 11.0
   Ocean Ripple 11.0
   Paint Daubs 11.0
   Palette Knife 11.0
   Patchwork 11.0
   Photocopy 11.0
   Plaster 11.0
   Plastic Wrap 11.0
   Poster Edges 11.0
   Read Watermark 3.0
   Reticulation 11.0
   Rough Pastels 11.0
   Save for Web & Devices 11.0
   ScriptingSupport 11.0
   Smudge Stick 11.0
   Spatter 11.0
   Sponge 11.0
   Sprayed Strokes 11.0
   Stained Glass 11.0
   Stamp 11.0
   Sumi-e 11.0
   SuperPNG 2.0
   Texturizer 11.0
   Torn Edges 11.0
   Underpainting 11.0
   Vanishing Point 11.0
   Variations 11.0 (11.0x001)
   Water Paper 11.0
   Watercolor 11.0
Plug-ins that failed to load: NONE
Flash: 0
Installed TWAIN devices: NONE

Error message disk image couldnt be opened

We have a new MacBook pro and need to download firfox but get the error message "the disk image could not be opened" this comes up after we downloaded firefox and tried to open it

I have reason to believe this is due to a bug with the new version of Pages.
I use Pages on my iPad for many of my main documents. All was well until the 1.6.1 (557) update a couple of days ago. Then, I started to encounter the "This document can't be opened" message with my larger documents.
Not only could/can I not open them on my iPad, but I could not download the affected Pages docs in iCloud. It gave me an error. As such, I also could not forward them as email attachments. (It told me the Filename was (Null).)
Fortuitously, I have access to another iPad with an older version of Pages. I configured it to use my iCloud ID and synced my documents. I could then open the affected documents using the older version of Pages and archive them. To "migrate" them from the older version of Pages (on my older iPad) to the newer version (on my iPad2), I had to send them to myself as .doc format email attachment. Of course, this has messed up with some formatting, but I can get to my text, at least
If someone at Apple wants to contact me, I can forward samples for your investigation, but I really think you messed up on this from a QA perspective. I came very close to believing my documents were corrupt when they obviously *are not*. All evidence supports that it is an file incompatibility issue between the two versions of the App.
Kind regards

Time Machine / Time Capsule Error: Backup disk image could not be mounted

So I'm trying to back up to time machine, which used to be working fine, but I have this problem happening on two computers now (which probably means the error is in my Time Capsule.)
The Time Capsule shows up on my "shared" list in my finder windows.
I can connect to it, and open the folder inside, and SEE my two disk image files in there.
But Time Machine gives me a "The Backup Disk Image Could Not Be Mounted" error. No other information.
If I double-click on the disk image file directly, I get an error "The Following disk images failed to mount" and then it lists the file and says "Resource temporarily unavailable."
Help, please.

I'm caught in the same loop, with no end in sight. I've only been using Time Machine and Time Capsule for 2 months. This week it stopped working. First error message:
"Unable to complete backup. An error occurred while copying files to the backup volume."
Checking the Time Machine preferences, "Last backup" would read "backup failed"
When I got this error, all the wireless functions went offline, even thought the TC light was still green.
I would shut down, shut down the Time Capsule, shut off my modem reboot everything in order.
Next error message:
"Disk repair. The disk 'Backup of [my computer]' was not repairable by this computer. It is being made available to you with limited functionality. You must backup your data and reformat the drive."
Then: "Time Machine Error: The backup volume is read only. To select a different volume ... Time Machine preferences ... "
I spoke to someone at Apple, who sent me the Time Machine Troubleshooting page:
http://support.apple.com/kb/HT3275?viewlocale=en_US
I went through:
1. updated my system software
2. updated the TC firmware to 7.4.1
3. dragged the sparsebundle to DiskUtility. It took a while (more than an hour?) but said the disk could not be repaired. When I tried again, the repair function wouldn't run.
4. tried to delete the sparsebundle, but it would choke at almost the end, sometimes it would just crash the finder, sometimes say "Sorry, an unexpected error occurred," sometimes "Operation cannot be completed because the item 'bands' is in use." I even tried to Stuff the bundle with 'delete original' checked, but the stuffing, after about 15 hours, jammed near the end (stuffed 20 gigs of 35 gigs).
5. tried to reselect the TC, and run backup anyways ... now it can't find the volume, back to the error messages and crashing Finder
6. checked password in Keychain, all ok.
Now what??
Do I use Airport Utility to erase it? At least TC is still showing up there. Or press the rest button on the back of the Time Capsule to reset to factory defaults?
I've resigned myself to losing my backups. Now I would just like to get it up and running again.
In hopes,
Linda

"Authentication error", making disk image

I'm trying to make a disk image of my OS X boot disk, as an emergency backup. I'm booting from the Installation CD that came with my Mac Pro, and using Disk Utility. I select my boot drive, click New Image, and tell it to save to an external firewire drive, compressed and encrypted. It starts and quickly errors out, with "Authentication error." What does this mean?
I've used 250 GB of the 500 GB on my boot drive, and my external drive is 120 GB. I'd rather tell it to skip some files to save space, but it doesn't give me the option to do that. Will "compress" get it to be small enough? Is this why I'm getting an error? I've repaired permissions before booting from the CD.

I don't know about the authentication error; however, to make a disk image of 250 GB source drive to a 120 GB target is an exercise in futility. There's not enough room. 250 GB? What are storing? A complete music store, the movies of Hollywood, or the pictures in an art gallery?
If you want an emergency backup of your 500 GB HD, then you'll need an external at least as big. BTW, making disk images for this purpose is fraught with danger since you can't ensure that it's good until you restore it to a bootable HD. I strongly recommend something like Carbon Copy Cloner, SuperDuper!, etc. instead. BTW, you can just drag & drop any data files from one HD to another. There's no need to put them in a disk image and certainly no need to encrypt things. If you decide to go the bootable backup route, move the data files to root-level and don't back those up. That should make your emergency backup a lot smaller.

Why is this error shwoing up when trying to acquire an image in labview?

Error -1074396120 occurred at IMAQ AVI Write Frame
Not an image.
Possible reason(s):
IMAQ Vision: (Hex 0xBFF60428) Not an image.
This error keeps showing up when i try to acquire an image and save it. the VI being used is attached.
Attachments:
ImageAcq.vi ‏49 KB

Hi bonesaw,
You're getting this error because the IMAQ AVI is expecting the image type to be the same as what you had specified at the beginning (using the IMAQ Create.vi). At the moment you have wired the channel number to the image type terminal of the IMAQ Create.vi. You should change that property to Image Type instead of Channel.

HELP- what does this mean- time machine error- backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?

The last date of my back up was 10/4- keeps saying The backup disk image "/backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?

HELP -- what does this mean -- .......
Often, this error can be corrected by pulling the power on the Time Capsule, waiting a few minutes, and powering the Time Capsule back up.
See # C12 for more tips
http://pondini.org/TM/Troubleshooting.html

Time Capsule - Time machine error "backup disk image could not be mounted"

Recently I lost a folder and attempted to resore from my Time Capsule backup (which I started when it first shipped) not only did it fail, but know I get the message "backup disk image could not be mounted" when I try to backup. I have used Airport Utility to try and sort - that shows green light and it is connected by ethernet 9and shows in network (I can see the sparsebundle). I have been trying for a couple of weeks now - any ideas??

John & Joel,
I've done some research and put together some ideas.
"The backup disk image could not be mounted"
*“Disconnect All Users…”:*
If your Time Machine backup drive (“Backup of Users Computer”) is mounted on your desktop or in the Sidebar of the Finder window. then Time Machine may think the drive is already in use. Alternatively, if the Time Capsule hard disk has been recently accessed by a Windows machine, it may not have fully relinquished control. Do the following:
Open Airport Utility and select the Time Capsule on the left.
Click “Manual Setup”.
Select “Disks” at top of window.
Click “Disconnect All Users…” at bottom of window.
Now try Backing up again.
*Stalled .inProgress Files:*
Select the TC in the SideBar of the Finder window.
Click "Connect as...". Enter your TCs password.
Double click the blue folder that appears in the finder window. The sparsebundle should now be visible.
Double click the sparsebundle and then click “Skip” in the checksum message.
Once “Backup of (Users Computer)” mounts in the Sidebar open the folder containing past backups. Are there any “.inProgress” files there. Delete them.
Unmount the backup drive and try backing up again.
*Permissions Issue:*
Select the TC in the SideBar of the Finder window.
Click "Connect as...". Enter your TCs password.
Double click the blue folder that appears in the finder window. The sparsebundle should now be visible.
Highlight the sparsebundle and “Get Info” (Cmd-I). At the bottom of the Get Info window open the “Sharing & Permission” section. Beside “Everyone” it should say “Read & Write”. If it does not, change it.
Now try performing a backup again.

IDVD09 Multiplexing Error formating disk, when saving to a disk image

Similar Messages

Maybe you are looking for