IE 11 Deployment options

Hey,
Is it possible to do the IE 11 upgrade via software updates? I googled for a bit and did not get much back apart from package deployments..?
Thanks

For Windows 7 and Windows Server 2008 R2, yes. It's an Update Rollup released May 13, 2014.
There are pre-requisites though (some of which may not be in the WSUS catalog -- don't know though as I haven't checked them all):
https://support.microsoft.com/en-us/kb/2847882
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

"Deploy" Option Missing from VS

We just finished installing SharePoint 2013 RTM and VS 2012 for development purposes. I also installed the Preview 2 of the Office and SharePoint Dev Tools. The "Deploy" option which was previously present in Visual Studio to deploy SharePoint projects seems
to have disappeared. Oddly, I can however still tell the projects to Debug, which does the equivalent of Deploy + starts the debugger.
This is an extremely annoying issue as it is much faster to Deploy without starting the debugger. If anyone has any solution I'd be very appreciative. Thanks.

try these linsk:
https://louisliang.wordpress.com/2013/07/02/deploy-option-missing-from-visual-studio-2012-for-sharepoint-project/
https://social.msdn.microsoft.com/forums/sharepoint/en-US/c7b00231-680f-4fa1-b7ea-0008697c8122/visual-studio-2012-missing-deploy-option-on-build-menu
http://stackoverflow.com/questions/22944015/deploy-option-missing-visual-studio-2012
http://sharepoint.stackexchange.com/questions/49718/where-is-package-menu-item-in-visual-studio-2012
http://sharepoint.stackexchange.com/questions/82878/missing-deploy-button-visual-studio-2012
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Where do I find the Package and Deployment options in CF Admin 8 and 9?

I've recently talked to a person at Adobe and found documentation on migrating using the Package and Deployment option to create CAR files. I just can't seem to find the menu options in my CF8 or CF9 Admin. I am running CF standard. I do have around 40+ datasources and a couple of dozen scheduled tasks that I need to move.
I just need someone to point out to me how to get to the Package and Depoymeny section.
Warmest regards,
David Miller

Standard doesn't have this feature. You need to be running Enterprise or Developer (see http://www.adobe.com/products/coldfusion/editions/).
You can revert to developer temporarily by removing your licence key, do the archive, put the key back in again ;-)
Adam

Deployment option under publish settings....

ello.
My problem has to do with under the DEPLOYMENT option in the
publish settings when your trying to import a video file, Im
wondering what the actionscript would perhaps look like if say I
want to take multiple videos and load them into one player. Im
trying to set up an empty flash player that when a user clicks on
say a thumbnail image the video corresponding to that image gets
loaded and autoplays in the player. Any ideas are
GREEEAAATTTLLLYY appreciated, cause im stuck.
Thanks, Joe.

don't import it unless you want a low-quality video that
takes a long time to load before it begins to display. use an flv
playback component or the video class or the video player
class.

SCCM 2012 Deployment Option Missing

Hey all,
I have a strange problem. I have build a custom task sequence (TS) to install operating systems on our computers. This TS runs scripts, installs applications and packages. I also have a front-end HTA that allows us to select certain software to be installed
and which OS image to apply. The issue I have is that every time the TS gets to the Run HTA part of the TS, which may I add is the very first step, the TS fails with error code 0x800700A1.
Now after several days of investigation I believe that the issue is that the deployment option is set to 'Download Content Locally when needed by running Task Sequence.' The problem, that is the only deployment option I can select. The other option, which
should be 'Access content directly from distribution point' is not even available. Researching this issue I found that I should make sure all my packages were copied to shares on the distribution points. So I did this, and to no avail. I made sure that a NAA
is set. Still, same error. A couple more things to note.
I am testing in a VMWare environment.
I have added the appropriate drivers to the boot image
Software deployments are working appropriately including the app catalog.
The NAA is a local admin on the distribution point.
All servers in the environment are Server 2012
So, I also began to think, "Well maybe SCCM doesn't like installing Applications from a TS and only handles packages...since applications are new to 2012."So I created a very simple TS that only installed an OS and still the same error. I added
the HTA just for kicks, same error. I have combed the smsts.log file and all of the errors keep leading me to dead ends or repeating steps I had already performed and then hoping for a different result. That's insane right?! If anyone has encountered this
error, and knows how to fix it, I would be forever grateful. If you would like the log file, I can accommodate. I just figured pasting a 4159 line long log file was a bit much.

>The problem, that is the only deployment option I can select.
The 'Run from DP' option is a Task Sequence-wide option in general, meaning that all the content would have to be duplicated to the package share in order to use it. Unless all the content is on the package share, this option is not available. The
only exception is the Apply OS step has its own setting.
If you have a step that uses content, but there is no formatted partition for the TS to download content to, you will receive an error. So, your first steps need to partition/format the drive if there is no usable partition before you try to download
content (like the files required for your HTA).
I usually steal the logic from the default MDT 2013 task sequence when integrated with ConfigMgr 2012 R2, even though I don't use MDT with ConfigMgr. The first real step is a format with this condition on it so it only runs if there isn't already a
local disk available:
If None of the Conditions are true:
select * from Win32_LogicalDisk where DriveType=3 and DeviceID != 'X:'
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you found a bug or want the product to work differently,
share your feedback.
<-- If this post was helpful, please click the up arrow or propose as answer.

NI Industrial Communications for EtherCAT 2.4 requires FPGA deployment option?

I am using NI Industrial Communications for EtherCAT 2.4, along with PXI real time target and some third party EtherCAT devices.
When I right clicked on my third party slave device in the LabVIEW project tree and selected Online Device State it started searching for NiFpgaBitfileGet_all.vi, then put up a message Cannot display selected category. I have temporarily fixed it by installing the FPGA deployment option. Will the fix still work once the 30-day evaluation period is over? I shouldn't need FPGA deployment option so why is there a dependency?

I do not have any NI slave devices. The third party device is a Micro-Epsilon confocalDT 2451 distance measurement probe. My controller is a NI PXI-8109, and I am using a PXI-8231 as the EtherCAT master. I am using LabVIEW 2011 with LabVIEW Real-Time 11.1. As an initial test setup I have just the one slave, as the attached project tree shows. I eventually want to have eight of these slaves, but that will need another thread. I have not had the opportunity to try "Revert to Default Personality" yet.
Paul
Attachments:
LV2.jpg ‏34 KB

Deployment Options

OWB newbie here - previous experience in custom built ETL. Multiple clients using our Oracle OLTP. Now need to build a warehouse that can be deployed to all clients but with options to switch on/off relevant components. Possibility/probability of moving into disparate source systems in future. So I have questions about deployment options.
1. Deploying to many targets when we cannot see the target. Brief reading tells me that we need to export the metadata, install the OWB client and runtime repository on site & deploy it all there? If all sources are Oracle, then the "here's your script, execute it every night" would be a simple deployment. Maybe with more disparate sources (flat files, etc), having to install OWB is a small overhead compared to the potential pain? Any advice welcome!
2. Core source schema is the same, but some modules may not exist on some client sites (e.g. different countries use different third party data). So invalid staging packages result in invalid parent packages? I suppose a possible workaround is to put the staging extract in dynamic sql so it always compiles and only run when the parameter is switched on. But then we're possibly losing some OWB benefits (source tracing, etc). Are there other options for this sort of thing?
Thanks for your help!

Or you could also assume that you have to do the initial leg work...
Analyze all sources which could be different based on the country, region, etc.
But that's not a problem because you can handle that using custom view in your integration layer to make all sources look at some point idential
Then you could load all this wonderfull data in your target DW using the same processes ....

Changing the Task Sequence Deployment Options via script

Hi all,
I am fairly new to SCCM 2012 scripting/SDK and couldn't find any helpful examples how to change the deployment options of task sequences by using a script.
The problem is: we have got a significant number of TS that have the deployments set to "Download content locally when needed by running task sequence".
I have to change this setting to "Download all content locally before starting task sequence".
Afterwards I need to create a list of all changed TS Deployment options and also a list of current settings of all TS Deployment options.
Therefore I would need a script that can read and set this particular option of the TS.
Does anybody have a script that can do such tasks? Any help is highly appreciated.
Btw, I am not picky, I can handle WMI, SQL, VBS, PowerShell, .Net Code (vb.net or c#). Whatever you have handy would be quite helpful.
Many thanks
Amir

Hi,
The Set-CMTaskSequence -DeploymentOption could help you change this setting.
Set-CMTaskSequence
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

RDS gateway deployment options with no DMZ

Hello
I have setup an RDS server that is running nicely and I now need to deploy it externally. I have read through the deployment guides which state that you should deploy the gateway in a DMZ. My problem is that I do not have a DMZ and my firewall does not have
a DMZ port or an option to assign different IPs to different internal interfaces. What would be the best deployment option if no DMZ is available?

Hi,
Thank you for posting in Windows Server Forum.
Agree with “Guna” comment, you can setup RD Gateway for accessing the server externally. For that you can refer following link to setup RD Gateway.
1. How To Work with RD Gateway in Windows Server 2012
2. Deploying Remote Desktop Gateway RDS 2012
Hope it helps!
Thanks.
Dharmesh Solanki

Connect 9 Managed Services Deployment Option

I have some questions about the managed services deployment option for Adobe Connect 9
Does the AC9 A managed services deployment include the cost of running on AWS or do I have to purchase that separately?
Can I upgrade from AC8 on premises to a managed deployment?
Can it be merged with some on premises installs of Connect and/or Connect Edge for a customised install?
Does it scale based on user demand or as a result of consultation between AC support and Client or not at all?
Does it scale from simple install to clustered version by simple I mean 1 Connect, server and associated support servers kind of setup to a more robust setup involving edge servers and clustering?
Can I modify the deployment or have it modified for me during the life of the deployment e.g. add SSO a few months after 1st deployment?
Is there a minimum number of host licences that need to be purchased?
Can I specify data location rules e.g. all data resides within EU datacentres?
Can extra features like Events or Courses be added to the managed deployment?
Is it only AWS platform that is avaialble for the managed services?
What kind of feedback on usage/performance of the deployment environment does the client get? (can the client access the logs, resource usages of the AC servers or is access only via the Connect web UI and the Adobe Support ticketing system)

1. You are paying an annual fee, there shouldn't be additional costs unless you increase licensing. The accounts are all deployed on AWS, I believe.
2. Yes, it will cost money to migrate the data, but it can be done.
3. [Updated] This is probably possible if you throw enough money at it.
4. The account can scale as needed. This is more of an issue around licensing though. Maybe I'm interpreting the question wrong.
5. The setup of Edge Servers and Clustering is on Adobe. You purchase the account and licensing, they get their hands dirty to configure setup. I know there is clustering for fail over scenarios.
6. Yes, the account is like having a licensed deployment, only you can call Adobe and yell at them when it doesn't work. SSO, SSL, additional licenses can all be added when needed.
7. There is a minimum cost, so I guess licensing could be tied to that, but it would vary based on the account needs.
8. Probably, that is best answered by the ACMS team.
9. Yes, just purchase the licensing.
10. AWS, I believe, is the only platform offered by ACMS.
11. You should have full access to the logs (or at least be able to request them at any point, or set up a recurring delivery of the logs/information). Think of this as a licensed deployment, you will have all the info you get by running your own server. I don't know a web UI that will deliver this info, but there may be something that Adobe can put in place. You should have a dedicated number of a person or team to reach out to for your ACMS deployment. You shouldn't need to start at 800-42-ADOBE.

Unable to deploy optional components in axis adapter sda

OS Windows 2003 and PI Version 7.0
Hi guys,
Currently we are having problems in deplying optional components in axis adapter sda archive, we have included the optional components inside the provider.xml file inside the sda as per sapnote #1039369 but it still is only installing the required components.
We are trying to install these 3 new components Jakarta-Commons Codec, Jakarta-Commons Net and Jakarta-Commons HttpClient.
Appreciate if anyone has expertise on this.
Tq.
Regards,
Saiful
Edited by: Mohd Saiful Nizam Rahimi on Dec 29, 2011 8:43 AM

Thanks, let me just recap the steps i did.
First, i modified the sda to include the 3 optional components via winrar. Then i modified the provider.xml as below
to reflect the additional components that i included.
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE provider-descriptor SYSTEM "library.provider.dtd">
<provider-descriptor>
    <display-name>com.sap.aii.af.axisproviderlib</display-name>
    <component-name>com.sap.aii.af.axisproviderlib</component-name>
    <major-version>3</major-version>
    <minor-version>0</minor-version>
    <micro-version>0</micro-version>
    <provider-name>sap.com</provider-name>
      <references>
         <reference type="library" strength="weak">activation</reference>
         <reference type="library" strength="weak">jms</reference>
         <reference type="library" strength="weak">mail</reference>
         <reference type="library" strength="weak">servlet</reference>
         <reference type="library" strength="weak">webservices_lib</reference>
         <reference type="library" strength="weak">com.sap.guid</reference>
      </references>
    <jars>
       <jar-name>axis.jar</jar-name>
       <jar-name>commons-discovery-0.2.jar</jar-name>
       <jar-name>commons-logging-1.1.1.jar</jar-name>
       <jar-name>commons-net-1.4.1-dev.jar</jar-name>
       <jar-name>wsdl4j-1.5.1.jar</jar-name>
       <jar-name>commons-codec-1.4.jar</jar-name>
       <jar-name>httpclient-4.1.2.jar</jar-name>
    </jars>
</provider-descriptor>
Deployed it but still failed, as it would only install the original components in the sda.
You mentioned i have to create a new jar file, how do i do that or i just have to create a new sda instead of modifying one.
Tq.
Regards,
Saiful

SP 2013 ONLINE + Branding artifacts Deployment Options?

Hi,
To deploy branding artifacts (master pages, CSS etc.) I have used Visual Studio; however, the SP2013 Online does not allow WSPs. From my research, sandboxed solution is
one way; however, MS calls it deprecated feature so I would look to continue researching. Now one could make the changes directly in the SP2013 Online and then save the artifacts in code repository but NOT
ideal.
So, what are our options (Best Practice) to be able to deploy customization to the SP2013 Online?
Thank you in advance for your time.

you can build the master page using below link
http://blog.blksthl.com/2013/02/26/a-guide-to-quick-sharepoint-2013-branding/
Once you have the master pages you can package them using sandbox solution. Only managed code is not allowed in sandbox but CSS and JavaScript can be deployed
http://blogs.msdn.com/b/sharepointdev/archive/2014/01/14/deprecation-of-custom-code-in-sandboxed-solutions.aspx
http://msdn.microsoft.com/en-US/library/office/jj163114(v=office.15)#SPAppVsClassic_Overview
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Add Schedule Deployment option in Tasks BCC

Hi All,
Currently there are 2 options for a new project in my BCC.
1. Deploy Project
2. Delete Project.
But, i want to add the option of Scheduling Deployments. How to acheieve this feature in 9.4.
Thanks,
Vishnu

When a project is approved for deployment in the workflow, then its deployment can be manually scheduled through Admin Console in BCC or you can configure the RecurringDeploymentService to schedule approved projects for automatic deployment in batches.
You can also customize the workflow to schedule project deployments the way you want and I guess this is what you are looking for. If you also want to add any additional actions for a task then you would have to modify the default workflow (commonWrokflow.wdl) by creating a copy of it from the ACC on CA server instance and then modify it to fit your needs. You might also want to write your custom actions and configure them through WorkFlowProcessManager's xml so that you can use them in your custom workflow definition as per your requirements.

Extension Jar deployment option is disabeled on JDev11

Hi,
Why "Extension Jar" is disabeled on Jdev11, i could not create deployment descriptor with this option ?
I f i go back to Jdev10, i could use my old .jar file ?
Regards
Philippe

Hi Nasir,
It looks like that Admin url is not set correctly can you take look on your configuration again.
Regards,
Kal

CAS&HUB Deployment options to 2 locations

Hi and Thanks for the feedback in advance
Environment: Exchange 2013 SP1, Windows 2012 R2
I have two geographical locations, but a single AD Domain, e.g. mydomain.local.
I want to deploy 2 CAS/HUB server 1 on each geographical location.
On each site, I'll have dedicate Mailbox server with DAG(s)
My objective is to minimize WAN utilization except in certain scenarios and to use a single name space, e.g. outlook.mydomain.local
What is your recommendation? The only options I have found so far are either NLB in my case Windows NLB, which is based on round-robin or to use 2 name spaces outlook1.my.... and outlook2.my.....
Round-Robin isn't my solution I have 200 users at 1 location and 50 at the 2 location. I want to streamline the environment for the users, thereby making this easier to me (the ultimate goal) :)

Looks like due to tech issue Windows NLB cannot be implemented, both CAS need to be on the same IP Subnet
http://technet.microsoft.com/en-us/library/hh831698.aspx
Oh well..

Adf mobile deployment option for blackberry/windows-mobile is disabled

Hi,
We are trying to deploy the sample FOD mobile app to blackberry simulator as per the tutorial given at:.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/jdev/obe11jdev/ps3/adf_mobile_top/adf_mobile/jdtut_11r2_54_1.html
We had followed all the steps given till Part 2 and were able to deploy the app to the BB simulator and test it also.
After that, we followed the steps given in Part 3 and now when trying to deploy the mobile client app to the simulator, the deployment profile option for BB is disabled and hence we are not able to deploy the application.
We have Jdev 11.1.1.4.0 with mobile client extension installed, and have also installed the BB JDE and simulator.
Can someone please help us to get the deployment to BB profile option enabled again?
PS: We also tried installing Jdev 11.1.1.4.0 with mobile adf extension on another machine with BB JDE and BB 9700 simulator, but on this new machine, the deployment profile option is disabled right from the start, we are not even able to deploy the changes we have done for part 2 of the tutorial.
Regards,
Hemant

Hi, Hemant, just to make sure, did you try to kick off deployment from the MobileClient project, or at the Application menu? Mobile Client app needs to be deployed from the application menu.
Also, if you have deployed already, the deployment profile has been created, so you simply would need to deploy again from the application menu.
If you are seeing these items are somehow disabled, then I don't think I have seen it before. Perhaps we can set up a web conference to look at it.
Please just ping me directly.
Thanks,
Joe Huang ([email protected])

IE 11 Deployment options

Similar Messages

Maybe you are looking for