IE8 Support for Xcelsius 2008
Hi,
I am looking urgently for information if IE8 is supported by Xcelsius on any patch level. If so, which patch level. If not is this planned for XC2008?
Background is an enterprise wide deployment at Daimler. They are about to roll out BO company wide and missed this "little" bit. It has business impact.
thanks
Thorsten
hi,
Xcelsius 2008 supports following browsers.
u2022Microsoft Internet Explorer 6.0 SP2
u2022Microsoft Internet Explorer 7.0
u2022Mozilla Firefox 2.0
u2022Mozilla Firefox 3.0
Regards,
Vamsee
Similar Messages
-
Windows 7 support for Xcelsius 2008
Hi,
This is to inform that Windows 7 is currently not supported on Xcelsius 2008 SP3.
There are however discussions to be available in the next release.
Best regards,
Jenni JacobHi Jenni,
It's working fine for me on Win7.
You may want to use the XP Compatibilty mode (standard in Win7) or "install/run as administrator".
Regards,
Thijs -
Supported pdf versions and mouse over problem for Xcelsius 2008 SP3
Hi,
Have below queries regarding Xcelsuis 2008 SP3.
(1) Encountered last character truncation problem for the x-axis and y-axis labels when viewed using adobe reader versions higher than 9.0.0. Viewing the pdf doc using adobe reader v9.0.0 has no label truncation problem. Preview in Xcesius is also ok.
(a) Y-axis label - eg. No. of students. The last char [s] is truncated when exported to pdf.
(b) X-axis label u2013 when labels are oriented vertically, they are very close to the x-axis. The last char is truncated.
Please advise what is the supported pdf versions for Xcelsius 2008?
Any workaround to overcome the truncation problem?
(2) Mouseover in charts. When the series name has < symbol, Xcelsius truncates the remaining text that's after the < symbol.
Is this a limitation that < symbol cannot be used? Any workarond for this? Any document to reference on the limitations of Xcelsius? e.g. If series name is '>1 and <=2', mouse over desc becomes '>1 and '.
Thanks and Regards.Hi ,,There are a lot of developments in SP3 version. But some loopholes which I caughtu2026
1. The value button/spinner is no longer supporting a cell having some formula. Also the time it is taking to load data which depends on value button/spinner as a result of change in it, is comparably very high as compared to earlier version.
2. Still there is no component like pre-load animation. So it is difficult to know weather the tool is running or not when one selects an option in some selector.
3. One still finds it difficult to work with a large range of data/complex spread sheet in xcelsius as it crashes while exporting.
4. Export to excel still needs Tomcat Web server,Java help. It is not simplified. -
IE8 Support for Siebel Analytics 7.8.5
Hi Experts,
Currently my company has given me the task to check the issues of IE8 support for Siebel Analytics as they are trying to upgrade IE6 to IE8.
So I have the following queries:
1. Will Siebel Analytics 7.8.5 supports IE8?
2. If not, then is there any patch available for 7.8.5 version to support IE8?
3. What are the other options there might be?
Please let me know your inputs.
Regards
SudiptaSudipta Gupta wrote:
Hi Experts,
Currently my company has given me the task to check the issues of IE8 support for Siebel Analytics as they are trying to upgrade IE6 to IE8.
So I have the following queries:
1. Will Siebel Analytics 7.8.5 supports IE8?Yes
2. If not, then is there any patch available for 7.8.5 version to support IE8?No patch required
3. What are the other options there might be?You might face some issues with GUI but no any major techical promblem
Hope this clears your doubt -
Issues with Service Pack 2 for Xcelsius 2008
I installed SP2 for Xcelsius 2008 and after completion I opened the xcelisius and found the Vertical Axis Labels are disabled under
the Apperance tab -> Text for the columnar chart components. But when I insert a new component they become visible.
It is a big dashboard and recreating all the components all over is a nightmare.
Can someone please suggest if there is a fix for this ?
THanks,
SamSam,
Copy all the components from the existing dashboard and paste it in a new one. This should solve your problem.
-Anil -
Xcelsius Batch Utility for Xcelsius 2008 SP1
Hi,
I would like to test the lab related to the bursting of Xcelsius dashboard. A key component for this is to install the Xcelsius Batch Utility for Xcelsius 2008 SP1. Does anyone know where this add-on can be found ?
kr.Frederic,
You may wish to refer the link below...
Exporting .swf file to Business Objects Enterprise
-Anil -
Oracle 10.2.0.3 support for Win 2008
I'm trying to install oralce 10.2.0.1 and patch it to 10.2.0.3 on windows 2008 server.
But when I try to launch the installer I get this error:
Abnormal program termination. An internal error has occured. Please provide the following files to Oralce support:
"Unknown"
"Unknown"
"Unknown"
I checked the metalink site and it looks that 2008 AMD64b is supported but not sure if this is for 10r2 or 11.
Is ora10gr2 supported on windows 2008?
What could be the installation problem? How could I address it?
Thanks a lot, TomThink It's not certified, but
for your installation issue look for Vista Certification and download Patch
p5860454_10201_WINNT.zip
This at least helps you with the installation
Ragards
Uwe -
What do I need to create Flex custom components for Xcelsius 2008 SP3?
Hello, and thanks for your time.
I have recently been roped into creating some custom components in Flex 3 for use in Xcelsius 2008 SP3. I can create custom components in Flex, but I have no idea how to get them into Xcelsius.
I have begun my own research into everything I am going to need, but I am hoping someone out there who has done this can provide a user-friendly itemized list of all the parts that are needed to accomplish this task. I want to make sure I do not miss anything.
Thanks for any insight you may be able to provide.
What I have so far:
Flex Builder 3
Xcelsius Engage Server 5.3 (2008)
What I think I need:
Xcelsius 2008 component SDK
Cheers!
Edited by: midasxl on May 5, 2011 6:11 PMHi Manisha,
Even we have a requirement to create doughnut chart in flex and need to add it in xcelisus.I can bulid that in flex and it is working with static data.Please provide me the sample code of how to pass dynamic data from xcelsius excel to this chart and how to create properties file for this chart.I have looked at horizantal slider example but that doesn't help much.
Thanks in Advance.
Regards,
Karthik -
BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2
The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
thanks,
Tony DeStefanis
Column5 ConsultingHi,
we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
we are developping our application-set and for the moment we have no problem.
regards
massimo -
Were do I find the evaluation Keycode for xcelsius 2008?
I just signed up and downloaded the eval version of xcelsius 2008 and It requires a keycode for install but I cannot find one in the email that they sent to me.
Trial versions of Xcelsius 2008 have a trial keycode embedded in them. You will be prompted everytime you open the trial version, but you can continue to use Xcelsius until your trial period expires.
-
IE8 Support for WebDynrpo Java
Hi, We are on EP6 and i read in SAP Notes that the Support Pack Level is 25 for IE8 Support (in non-compatability mode), but I can only see a support pack to patch level 24 in service.sap.com.
Does anyone know if SP25 for EP6 is out yet? or if not, then when it is likely to be released?
regards,
rob
Edited by: robert munro on Jun 23, 2009 1:57 PMI was aware that SP 23 was already out in the beginning of this year and as per your information SP 24 is also available now. SP 25 is surely not out yet.
Just keep checking the PAM it would be updated as soon as the new SP is released. Not sure but I don't think you'll have to wait too long -
Windows Mobile (Pocket PC) Flash Player for Xcelsius 2008
Hi All,
What version of flash player that can run Xcelsius Flash 2008?
My Pocket PC is HP IPaq 612, I have installed Flash Player 7.0, but the xcelsius doesn't run.
Thanks,
DevinHi Devin,
You would still need the (full) Flash 9 player on your mobile as that is the version of Flash that Xcelsius is generated for. Flash Lite will not work either because that is a cut down version of the flash player...
Maybe Adobe will create Adobe AIR for mobile devices (and support the Flash 9 player), we'll have to wait and see what happens...
Regards,
Matt -
Confirm no support for MSSQL 2008 before reverting to older EM version
Before I resort to installing EM Grid Control (11.1.0.1), I want to confirm that I have correctly read that EM12C does NOT support monitoring of MSSQL 2008. I understand that MSSQL 2008 R2 is certified with EM12C but, it appears that monitoring the original MSSQL 2008 is not.
Also, I'm a bit nervous about using EM Grid Control since it appears to have been a one-and-only version. Would I be smarter to go back to one of the EM10 versions?
This will be a new install, not an upgrade, so I hate to start out with an outdated EM tool but, I have to be able to monitor MSSQL 2008.
TIA,
JeriI have received a response from MOS to my original SR which confirms that EM12C is not certified for monitoring MSSQL 2008. For those who may possibly be interested in clarification of other OS and/or MSSQL versions with various flavors of EM, I've included below the full SR response details:
"The 12cR1 and 12cR2 Cloud Control are only certified to monitor two versions of Microsoft SQL Server : 2005 and 2008 R2
The 12cR2 is certified with these 3 Windows OS versions : 7,2008 R2,2003 on 64-bit platform where as the 12cR2 is certified with 4 versions of Windows OS version: 7,2008 R2,2008,2003
The 11g Grid Control is certified to monitor 7 versions of Microsoft SQL Server (including 2008) : 2008 R2 Cluster,2008 R2,2008 Cluster,2008,2005 Cluster,2005,2000
Also 11g Grid Control certified with 4 versions of Windows platform : 7,2008,2003 R2,2003"
The analyst who provided this information was also kind enough to open another SR on my behalf which will hopefully yield the answer to my other question- whether deploying 11g Grid Control is the best option for my environment or whether one of the EM10 versions might be a better choice. Unless someone else here is interested in that answer too, I won't update this post further with that information.
Thanks, Jeri -
CUCM and Unity LDAP Support for Server 2008 R2
I am planning on upgrading our Primary DC from Server 2003 Standard to Server 2008 R2. We current have 2 CUCM's version 7.1.5.31900-3 and 1 Cisco Unity version 7.0 (2). Both reference LDAP and/or GC. I need to know will everything break once I demote the 2003 DC. I already have one 2008 R2 domain controller in place. Also is the 2008 R2 domain functional level supported?
Hi,
The directory hierachy for a backup taken using windows server backup will be something like this:
\WindowsImageBackup\<ServerName>\<Backup datetime>\<guid name>.vhd file along with some xml config files.
The directory heirachy above suggests the backup was not taken using Windows Server Backup, at least directly, if it is taken using some software scripted over windows server backup, the .chm file may belong to that software.
The .vhd file created by windows server backup is not mountable in readonly mode, it is mountable in readwrite mode only.
Thanks,
Abhinav
This posting is provided "AS IS" with no warranties, and confers no rights -
SAP Support for Windows 2008 R2 SP1
How can I find out if SAP supports Windows 2008 R2 SP1?
We have ECC6 enh4 running on Win2008R2 servers, our admin would like to apply SP1 to these. I'm trying to find documentation to verify SAP Supports SP1. So far I've come up empty.
ThanksHello Laurie,
The up to date kernels support Windows 2008R2
SAP supports the following 64-bit (x64, IA64) Windows Server 2008 R2 editions:
Standard edition, Enterprise edition, Datacenter edition, and for Itanium-Based Systems edition
Windows Server 2008 R2 Server Core is not supported by SAP.
See url
SAP on Microsoft Windows
Hope it's work for you,
Ignacio.
Maybe you are looking for
-
Transport Error when Importing appset in target system
We are receiving the below error when importing the appset TEST in Quality system. We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects. Any clues to what the problem could be? Post-import method RS_AFT
-
XSLT for converting the determination server xml into the debugger xml
I've seen this before but i can't find the post. I'm looking for an xsl or xslt document to convert a determination server xml payload request into something that can be imported into the debugger for analysis. It would be cool if the xml was constra
-
Java stored proc from proxy Java classes generated from a web service?
Hi gurus, I have searched "Java Stored Procedure" on this forum but could not find what I am looking for, so I have to post again. I need to use a web service and my client app is written in PowerBuilder 11 (Sybase), which claims that it will create
-
HEY CREATIVE!!!! Where is the remote control plug-in for Mediasource 5?
I just upgraded to Mediasource 5 only to discover that this version doesn't offer any support for my Creative remote control. The remote control plugin on the downloads page says: "This download is for all Creative MediaSource? (version 3.00.6 or lat
-
hello I am new to all this I just purchases a mac book pro, and i did an update tonight and now i seem to have 2 microsoft messengers on my dock thing down the bottom can anyone help e out please