If conditions in a query

Hi All
If any one has used if conditions (Boolean operators) in a query designer please assist me. Following is my requirement
I have a char-A which is EQ 'AB', based on this i should calculate the formula as in
IF CHAR-A = 'AB'.
  KEYFIGURE4 = (KEYFIGURE1 - KEYFIGURE2 + KEYFIGURE3) * -1.
ENDIF.
Hope i am clear
Thanks in advance
Regards

solved by my self, used a formula with aggregation reference char
Regards

Similar Messages

  • Options in Assignment of Condition in BEX Query Designer

    Hi Experts,
      I am trying to define a condition in BEX Query Designer.
    I defined my condition and bit confused with Characterstic Assignment
    What Happens if is select 9What is the difference)
    1) All Characterstic in the Drilldown Independtly
    2)Most Detailed  Characterstic Along the Rows
    3)Most Detailed Characterstic Along Columns and
    4)Individual Chars and Chars.Combinations
    Thanks

    hi,
    chk the link
    Query creation
    http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a5625e09411d2acb90000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/d21c1f46076bb2e10000000a1553f6/content.htm
    Ramesh

  • Problem with Conditions in a Query

    Hello All,
                 I have the following Condition in My Query.
    Applied Amount Equals to 0.   When I run the Query I receive a message 'No Records Exists with the given conditions'.   But when I remove the condition and place 'Applied Amount' in the Columns Section I see there are numerous records that Have 'Applied Amount' as 0.   What might be the problem?
    Thanks

    Hi,
    Check out the zero suppression in your BEx analyser and also make sure that when you have defined conditions then you have to select only Applied Amount Charecteristic rather than all the charecteristics.
    Hope tis helps...
    Assign points if it helps..
    Thanks,
    Gattu.

  • Multiple Conditions in a Query

    Hi,
    I have one Characteristic and 3 KeyFigures (mentioned below in quotes) in a Query and I would like to have following Conditions built in the query:
    1. Top N Condition on "Net Sales"
    2. Only display "Costs" > 0
    3. Only display "Quantities" > 10
    For some reason, it is not working as desired whether I combine them in one Condition or create 3 different Conditions in the Query. Does anyone have any idea?
    Thanks
    Srini

    Hi Srini,
    What exactly is wrong?
    In case of three separate conditions try to activate the 1st one, then the 2nd one, and finally - the 3rd one.
    If on one of these steps you'll get a message about non applicability, then your conditions conflict with each other.
    See examples of using conditions here:
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/f584409db95537e10000000a1550b0/frameset.htm
    Best regards,
    Eugene

  • How to add join conditions in ABAP Query.

    Hi,
    I need a help on "ABAP Query".
    How to add join conditions in ABAP Query.
    Thanks in advance.
    Thanks & Regards,
    Ramana

    Hi,
    See below code,
    *& Report  ZRNP_ALV_SO
    REPORT  zrnp_alv_so MESSAGE-ID z7rnp .
    INCLUDE zrnp_include .
    *SELECTION SCREEN                                                      *
    SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-004 .
    SELECT-OPTIONS: s_vbeln FOR vbak-vbeln ,
                    s_auart FOR v_auart ,
                    s_vkorg FOR v_vkorg ,
                    s_spart FOR v_spart ,
                    s_kunnr FOR v_kunnr ,
                    s_matnr FOR v_matnr .
    SELECTION-SCREEN END OF BLOCK blk1 .
    *AT SELECTION SCREEN                                                   *
    AT SELECTION-SCREEN.
      SELECT SINGLE vbeln
                     FROM vbak INTO vbak-vbeln
                     WHERE vbeln IN s_vbeln.
      IF sy-subrc <> 0.
        MESSAGE e202.
      ENDIF.
    *START OF SELECTION                                                    *
    START-OF-SELECTION .
      PERFORM data_select.
      PERFORM t_sort USING i_sort .
      PERFORM event_cat USING i_event .
      PERFORM fld_cat USING i_fldcat[] .
      PERFORM t_layout USING i_layout .
      PERFORM fld_cat2 USING i_fldcat2[] .
      PERFORM call_alv.
    * DATA SELECT                                                          *
    *&      Form  DATA_SELECT
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM data_select .
      REFRESH: it_vbfa, it_so1, it_del_ful ,it_del1 .
      BREAK-POINT.
      *SELECT*
            *a~vbeln*
            *a~auart*
            *a~vkorg*
            *a~spart*
            *a~kunnr*
            *b~posnr*
            *b~matnr*
            *c~maktx*
            *b~kwmeng*
            *b~vrkme*
            *INTO TABLE it_so1 FROM vbak AS a*
                  *INNER JOIN vbap AS b ON b~vbeln = a~vbeln*
                  *INNER JOIN makt AS c ON c~matnr = b~matnr*
                  *AND c~spras = sy-langu*
                  *WHERE a~vbeln IN s_vbeln .*
      IF sy-subrc = 0.
        SORT it_so1 BY vbeln.
        DELETE ADJACENT DUPLICATES FROM it_so1.
      ENDIF.
    * COLURING DISPLAY                                                     *
      DATA: ld_color(1) TYPE  c .
    *  LOOP AT it_so1 INTO wa_so.
    * Populate color variable with colour properties
    * Char 1 = C (This is a color property)
    * Char 2 = 3 (Color codes: 1 - 7)
    * Char 3 = Intensified on/off ( 1 or 0 )
    * Char 4 = Inverse display on/off ( 1 or 0 )
    *           i.e. wa_ekko-line_color = 'C410'
    *    ld_color = ld_color + 1.
    * Only 7 colours so need to reset color value
    *    IF ld_color = 8.
    *      ld_color = 1.
    *    ENDIF.
    *    CONCATENATE 'C' ld_color '10' INTO wa_so-line_color.
    **  wa_ekko-line_color = 'C410'.
    *    MODIFY it_so1 FROM wa_so.
    *  ENDLOOP .
    *  IF sy-subrc = 0.
      IF NOT it_so1[] IS INITIAL.
        SELECT vbelv
               posnv
               vbeln
               posnn
               vbtyp_n
               INTO TABLE it_vbfa
               FROM vbfa
               FOR ALL ENTRIES IN it_so1
               WHERE vbelv = it_so1-vbeln
               AND   posnn = it_so1-posnr
               AND vbtyp_n ='J' .
        IF sy-subrc = 0.
          SELECT vbeln
                 posnr
                 matnr
                 werks
                 lgort
                 charg
                 lfimg
                 vrkme
                 FROM lips INTO TABLE it_del_ful
                 FOR ALL ENTRIES IN it_vbfa
                 WHERE vbeln = it_vbfa-vbeln
                 AND   posnr = it_vbfa-posnn.
        ENDIF.
      ENDIF.
    ENDFORM.                    " DATA_SELECT
    **************** EVENT CATALOG ****************************************
    *&      Form  EVENT_CAT
    *       text
    *      -->P_I_EVENT  text
    FORM event_cat  USING    p_i_event TYPE slis_t_event .
      REFRESH p_i_event .
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    * EXPORTING
    *   I_LIST_TYPE           = 0
       IMPORTING
          et_events             = p_i_event
    * EXCEPTIONS
    *   LIST_TYPE_WRONG       = 1
    *   OTHERS                = 2
    *  IF sy-subrc <> 0.
    ** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *  ENDIF.
      READ TABLE p_i_event WITH KEY name = slis_ev_top_of_page INTO t_event.
      IF sy-subrc = 0.
        MOVE 'TOP_OF_PAGE' TO t_event-form.
        MODIFY p_i_event FROM t_event INDEX sy-tabix TRANSPORTING form.
      ENDIF.
      CLEAR t_event .
    ENDFORM.                    " EVENT_CAT
    **********FORM FOR EVENT TOP_OF_PAGE**********************************
    FORM top_of_page .
      REFRESH i_listheader.
      DATA: t_header TYPE slis_listheader.
      DATA: v_text(50).
      WRITE sy-datum TO v_text.
      CLEAR t_header.
      t_header-typ = 'S'.
      t_header-key = "Date".
      t_header-info = v_text.
      APPEND t_header TO i_listheader.
      CLEAR t_header.
      CLEAR v_text.
      WRITE:  'SALES ORDER & DELIVERY DETAILS REPORT  ' TO v_text .
      t_header-typ = 'S'.
      t_header-key = 'TITLE'.
      t_header-info = v_text.
      APPEND t_header TO i_listheader.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = i_listheader.
    *      I_LOGO             = 'ALV_BACKGROUND'.
    *   I_END_OF_LIST_GRID       =
    ENDFORM.                    "TOP_OF_PAGE
    ********  FIRST ALV GRID DISPLAY ***************************************
    FORM call_alv .
    * FORM TO MAKE THE CELL CONTENTS INVISIBLE.
    * PERFORM INVISIBLE_CELL_CONTENTS. *
    *EXCLUDE-DECLARATION.
      CLEAR wa_exclude.
      wa_exclude-fcode = '&VEXCEL'.
      APPEND wa_exclude TO i_exclude.
    *&      Form  CALL_ALV
    *       text
    *  -->  p1        text
    *  <--  p2        text
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         i_callback_program                = sy-repid
    *    I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
         i_callback_user_command           = 'USER_COMMAND1'
         i_callback_top_of_page            = 'TOP_OF_PAGE'
         i_background_id                   = 'ALV_BACKGROUND'
         is_layout                         = i_layout
         it_fieldcat                       = i_fldcat[]
         it_excluding                      = i_exclude
         it_sort                           = i_sort
         it_events                         = i_event
        TABLES
         t_outtab                          = it_so1
    *  IF sy-subrc <> 0.
    ** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *  ENDIF.
    ENDFORM.                    " CALL_ALV
    ************** FIRST FIELDCATALOG *************************************
    *&      Form  FLD_CAT
    *       text
    *      -->P_I_FLDCAT[]  text
    FORM fld_cat  USING    p_i_fldcat TYPE slis_t_fieldcat_alv.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'."TABLE NAME
      i_fldcat-seltext_m   = 'SALES ORDER NO.'.
      i_fldcat-col_pos     = 1.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-hotspot     = 'X'.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'AUART'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'."TABLE NAME
      i_fldcat-seltext_m   = 'SALES DOC. TYPE'.
      i_fldcat-col_pos     = 2.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'VKORG'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'SALES ORG.'.
      i_fldcat-col_pos     = 3.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 12.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'SPART'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'DIVISION'.
      i_fldcat-col_pos     = 4.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 10.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'KUNNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'SOLD TO PARTY'.
      i_fldcat-col_pos     = 5.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'SALES DOC. ITEM'.
      i_fldcat-col_pos     = 6.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 17.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'MATERIAL NO.'.
      i_fldcat-col_pos     = 7.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'MAKTX'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'DESCRIPTION'.
      i_fldcat-col_pos     = 8.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'KWMENG'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'QUANTITY'.
      i_fldcat-col_pos     = 9.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-do_sum    = 'X'.        " For doing "SUM"
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'SALES UNIT'.
      i_fldcat-col_pos     = 10.       " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 10.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
    ENDFORM.                    " FLD_CAT
    ****************** ALV SORTING  ***************************************
    *&      Form  SORT
    *       text
    *      -->P_I_SORT  text
    FORM t_sort  USING    p_i_sort TYPE slis_t_sortinfo_alv .
      DATA: i_sort TYPE slis_sortinfo_alv .
      REFRESH p_i_sort .
      CLEAR i_sort.
      i_sort-spos = 1.
      i_sort-tabname = 'IT_SO1'.
      i_sort-fieldname = 'VBELN'.
      i_sort-up = 'X'.
      i_sort-subtot = 'X'.
      i_sort-group = '*'.
      APPEND i_sort TO p_i_sort.
    ENDFORM.                    " SORT
    *FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
    *  SET PF-STATUS 'ZSTANDARD'.
    *ENDFORM. "Set_pf_status
    ***********FORM FOR EVENT USER_COMMAND1********************************
    FORM user_command1 USING r_ucomm LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
    *CASE R_UCOMM .
    *    WHEN '&IC1' .
    *    IF rs_selfield-FIELDNAME = 'VBELN' .
    *    ENDIF .
    * WHEN OTHERS .
    * ENDCASE .
      CLEAR wa_so.
      REFRESH: it_del1 .
      IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
      rs_selfield-value IS NOT INITIAL.
        READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
        IF sy-subrc = 0.
          LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_so-vbeln
                                       AND   posnv = wa_so-posnr.
            READ TABLE it_del_ful INTO wa_it_del_ful
                 WITH KEY vbeln = wa_vbfa-vbelv
                          posnr = wa_vbfa-posnn.
            IF sy-subrc = 0.
              CLEAR wa_del.
              MOVE wa_it_del_ful TO wa_del.
              APPEND wa_del TO it_del1.
            ENDIF.
          ENDLOOP.
        ENDIF.
      ENDIF.
    ********* SECOND ALV GRID DISPLAY ***********************************
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
        i_callback_program                = sy-repid
    *   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
        i_callback_user_command           = 'USER_COMMAND2'
        i_callback_top_of_page            = 'TOP_OF_PAGE'
        i_background_id                   = 'ALV_BACKGROUND'
        it_fieldcat                       = i_fldcat2[]
        it_sort                           = i_sort
        TABLES
        t_outtab                          = it_del_ful
    *  IF sy-subrc <> 0.
    ** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *  ENDIF.
    ENDFORM .                    "USER_COMMAND1
    ********** FORM FOR EVENT USER_COMMAND 2 ******************************
    FORM user_command2 USING r_ucomm LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
      CLEAR wa_so.
      REFRESH: it_del1 .
      IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
      rs_selfield-value IS NOT INITIAL.
        READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
    *    IF SY-SUBRC = 0.
    *       LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = WA_SO-vbeln
    *                                    AND   posnv = WA_SO-posnr.
        READ TABLE it_del_ful INTO wa_it_del_ful
             WITH KEY vbeln = rs_selfield-value
                     " vbeln = wa_vbfa-vbeln
                      posnr = wa_vbfa-posnn.
        IF rs_selfield-fieldname = 'VBELN'.
          SET PARAMETER ID 'VL' FIELD wa_vbfa-vbeln .
          CALL TRANSACTION 'VL03' AND SKIP FIRST SCREEN.
        ENDIF .
    *       ENDLOOP.
    *    ENDIF.
      ENDIF.
    ENDFORM .                    "USER_COMMAND2
    ********* SECOND FIELDCATALOG ******************************************
    *&      Form  FLD_CAT2
    *       text
    *      -->P_I_FLDCAT2[]  text
    FORM fld_cat2  USING    p_i_fldcat2 TYPE slis_t_fieldcat_alv .
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-tabname     = 'IT_DEL_FUL'."TABLE NAME
      i_fldcat2-seltext_m   = 'DELIVERY NO.'.
      i_fldcat2-col_pos     = 1.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-hotspot     = 'X'.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'DELIVERY ITEM'.
      i_fldcat2-col_pos     = 2.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'MATERIAL NO.'.
      i_fldcat2-col_pos     = 3.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'WERKS'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'PLANT.'.
      i_fldcat2-col_pos     = 4.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'LGORT'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'ST. LOCATION'.
      i_fldcat2-col_pos     = 5.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'CHARG'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'BATCH NO.'.
      i_fldcat2-col_pos     = 6.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'LFIMG'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'ACT. DEL. QTY.'.
      i_fldcat2-col_pos     = 7.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'SALES UNIT.'.
      i_fldcat2-col_pos     = 8.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
    ENDFORM.                                                    " FLD_CAT2
    ***************** ALV LAYOUT *******************************************
    *&      Form  LAYOUT
    *       text
    *      -->P_I_LAYOUT  text
    FORM t_layout  USING    p_i_layout TYPE slis_layout_alv .
      p_i_layout-zebra  = 'X'.
      p_i_layout-totals_text = 'GRAND TOTAL ='.
    *  p_i_layout-CONFIRMATION_PROMPT = 'X'.
    *  p_i_layout-DEF_STATUS  = ' '.
      p_i_layout-info_fieldname = 'LINE_COLOR'.
    ENDFORM.                    " LAYOUT

  • How to insert 2 conditions in a Query

    Hi ,
    How can i apply 2 conditions to a query
    First i need to apply a condition X to query and then i need to apply condition Y to the  results which are based on condition X
    How can i acheve this

    Hi
    We can create multiple condition in one query
    When ever u select condition on tab it shows two options Chenge condition and new condition
    If we have 2 comndition in one query it works with AND function .
    If we have all applicable condition in one condition then it works with OR functionality.
    Assign points

  • Conditions on a query

    Hello,
    I am working on BW3.5.
    Problem: When I create conditions on a query.I am not able see the check boxes for selecting the characteristics.
    Regards,
    Siva

    Hi,
    It could be anything your GUI version (upgrade that) or authorizations. Try on some other machine or some other user id and you should be able to figure it out.
    Regards
    Vikash

  • Nested Conditions in a Query or Priority setting

    Hi all
    Would anyone know whether it would be possible to do nested conditions or set the priority of conditions in a query?
    My problem is that I have two conditions, A and B. Both are optional, however, if both are entered together I want condition A to take effect before condition B.
    Example:
    Condition A is amount received (range)
    Condition B is Top N customers
    When both are entered together, I want to see the top N customers within the specified amount range.
    Currently, both conditions are together, meaning that if my specified range does not encompass the top N customers, I do not get any data retrieved.
    Any help on this would be appreciated and points awarded.
    Thanks in advance
    Nicholas

    I have exact same question that Nicholas Chia asked last year. Does anybody have any suggestions to achieve this?
    Here is the example scenario:
    CHAR          KF
    ABC          10
    BCD          -5
    CDE          0
    DEF          4
    EFG          6
    FGH          2
    IJK          -8
    Condition 1: Top 5
    Condition 2: Key figure <> 0
    I expect to see the results like this:
    CHAR          KF
    ABC          10
    BCD          -5
    DEF          4
    EFG          6
    FGH          2
    But, BEx outputs like this:
    CHAR          KF
    ABC          10
    DEF          4
    EFG          6
    FGH          2
    I think BEx is first applying the Top N condition. Takes the resulting data and then applies KF <> 0 condition.
    Is there a way to achieve the results the way we like (first apply condition 2 and then the condition 1). Creating the conditions in different order have no effect.

  • How to create a formula based condition in bex query designer

    hi all,
    i have scenario in query designer where i need to calculate Key performance indexes based on characters and key figures iam using.for example the condition is like:
    "if call received is less than call projection then give call received else null"
    how and where to define the condition and i need to name the condition to display it seperatly.please help me in this issue.
    regards
    Vamshi D Krishna

    hi you have to break down your conditions and then code for them.
    for e.ge.
    if actual == 0
      vart = 0.
    else if actual-target ==0
              vart = 0.001
           else
             vart = actual -target
           endif
    endif
    now we start with first condition use operators from boolean catagory
    (Actual != 0)*(other amount)
    this solves first if condition... if actual  = 0 value actual != 0 will be zero we got our desired value.
    if other case then we have give else condition.
    (Actual != 0)*(((actual - target) == 0 )*0.001+((actual-target)!=0)*(actual-target))
    in the second half we have coded the else part.
    in the same way you can proceed for your logic

  • Usage of formulas in conditions in BEx Query Designer

    Hi guys,
    does anybody of you guys know, if it's possible to use the results of formulas in conditions? I tried it, but the result of the query was "No applicable data found", but there are data for the selection.
    When I'm defining the condition with the key figure (no restricted or calculated key figure), then the query can be executed.
    In my case, I like to define a condition based on a formula result. The value should only be displayed, when the result is greater than 30.
    Any ideas or are there any bugy in the BEx Query Designer?
    Thanks a lot + best regards,
    Clemens

    Hi Clemens,
    I have created a condition in my own system based on formula and it works perfectly fine. Please check following points in your condition change mode,
    1) Condition is marked as Active.
    2) In the block "Evaluate condition below for" you will have to select "All characteristics in drilldown Independently". If you have selected combination of characteristics then you will have to maintain proper sequence otherwise your condition will not work.
    3) In the next block when you set the condition, click on new, in the first block select your Formula from dropdown and set the proper operator in your case you will have to select "Greater than" in the next column set the value of key figure and just trasnfer it.
    Now you are ready to use the condition.
    Regards,
    Durgesh.

  • How to write a condition in BEX Query Designer

    Hi
    How can i write a condition in Query Designer
    Scenario
    An employee can purchase any no of policies in a day or month.each policy will have start date and expiry date.
    My requirment
    Count all the policies(valid) by employee on a ranges basis exception reporting
    (0-10;10-20;20-30;30-40) and then able to drill down by policy start date and expiry date.
    As per the requirment is to show policies which are not yet expired (active) i need to write a condition that will count only policies whose Expiry date is > Current calender day
    As Policy Expiry Date is a char i am converting it to KF using fourmala variable so that i can write a condition on it using current cal day formula variable sap exit
    But i char assigment of a condition i find 4 option
    How can i achieve this
    Thanks

    Hi Aurun,
    Thanks for the help,Really appreciated
    As this is my first enhancement using ABAP & CMOD
    What type of key (either Access or developer ) do i require to perform the following  enhancement......so that i can raise request with basis team
    I shall be great ful if u can asnwer below question
    First, you need to create a variable for expiry date with processing type as customer exit, and then give the necessary info.
    In details tab, unchk ready for input as we wont be taking the value from the prompt.
    Now go to CMOD transaction.
    Open the correcsponding project which has the exit code
    (How can i identify the project which has exit code)
    and go to ZXRSRU001 module inside taht.
    Go to the module where u write the exit.
    (How to locate the required module)
    Then, under i step 1, write the code:
    IF I_STEP = 1.
    CASE V_NAME  (What is 'V_NAME',Is it my variable technical name)
    WHEN 'X' " X is the variable u created for the exit
    l_s_range-low = SY-DATUM.
    l_s_range-opt = 'I'.
    l_s_range-sign = 'GT'.
    APPEND l_s_range TO e_t_range.
    END CASE.

  • If Condition in Keyword Query Language (SharePoint 2013 Search Results)

    Hi All,
    Can we have an "If" condition in Query text box in SharePoint 2013 Search results page. For example, i want to hide all list items whose
    status is "HideItem" from appearing in search results?
    I am trying this: {?{searchTerms} (contentclass:STS_ListItem -ListItemStatus:"HideItem")}
    But, this hides all items like aspx pages, pdf's, docs and displays only list items. 
    Similarly, hide pages of some name like: AllItems.aspx, ViewDetails.aspx, AllAssets.aspx 
    {?{searchTerms} (contentclass:STS_ListItem_850 -filename:"AllItems.aspx")} 
    Any help would be great. Thanks in advance.

    Thanks Steve. I found this solution after a bit of struggle :).
    Also, date comparision is not working as expected. 
    {?{searchTerms} NOT(contentclass:STS_ListItem AND ListItemStatus:"HideItem" AND
    PublishDate<{Today})} is not working and throwing syntax error.
    I don't see any solid reference to KQL syntax except this msdn link.
    Can you please suggest any good material on KQL syntax ?
    Thank you once again.

  • Customer Exit Variable and Condition in a Query (Sequence of Execution)

    Hi,
      For a query i defined a Customer exit variable and a condition....
    Which will first execute...wether it is a  Variable and then Condition or vise versa
    Is there any way we can control sequence of execution
    My requirment is first to execute the condition and the variable how can i control this
    Thanks

    Hi
    In your customer exit you will be having a field by name I_STEP which will help you to handle the time of execution of the variable.
    Assign points if helpful
    Prathish

  • Selecting data from single table with different condition in single query

    Hi everybody...
    I have one table with col1, col2, col3, col4, col5... as columns.
    I want to select col1, col2, col3 with condition (x=y and a=b and c=d)
    I want to select col4, col5 with condition (x=y and a=b and m=n )
    in single query...
    Thanx for ur help

    Given this data set...
    SQL> select * from oddity
      2  /
          COL1       COL2       COL3       COL4       COL5 A X C M
             1          2          3          4          5 B Y   M
             1          2          3          4          5 A Y C N
             1          2          3          4          5 A Y D M
             1          2          3          4          5 A Y D N
             1          2          3          4          5 B Y D N
             1          2          3          4          5 B Y D U
    6 rows selected.
    SQL>The following query meets the requirements. Of course, the requirements as stated are incomplete. I ahave assumed that we select all five columns if C=D andM=N.
    SQL> SELECT decode(c, 'D', col1, '0') AS col1
      2         , decode(c, 'D', col2, '0') AS col2
      3         , decode(c, 'D', col3, '0') AS col3
      4          , decode(m, 'N', col4, '-8') AS col4
      5           , decode(m, 'N', col5, '-8') AS col5
      6  FROM oddity
      7  WHERE a = 'B'
      8  AND  x = 'Y'
      9  /
          COL1       COL2       COL3       COL4       COL5
             0          0          0         -8         -8
             1          2          3          4          5
             1          2          3         -8         -8
    SQL> Cheers, APC

  • Join two list with condition using caml query in SharePoint 2013 with client object model

    Hi,
    Want to join two list to get all fields from both list.
    Am new to sharepoint and sharepoint 2013. Am working in sharepoint 2013 online apps. Am using context.executeQueryasync to load list and get items from list. Am able to get items from single list with caml query, but not able to get both list field values
    with joins.  I did lot of surfing..but not..
    Below is my code..
    ListName1 : "AssignedTasks"
    ListName2 : "Tasks"
     var assignedQueryTest = "<View><Joins><Join Type='INNER' ListAlias='Tasks'><Eq><FieldRef Name='TaskId' RefType='Id'/><FieldRef List='Tasks' Name='ID' /></Eq></Join></Joins>"
                    + "<ViewFields><FieldRef Name='TitleValue' /><FieldRef Name='ActionItemsValue' /></ViewFields>"
                    + "<ProjectedFields>"
                    + "<Field Name='TitleValue' Type='Lookup' List='Tasks' ShowField='Title' /><Field Name='ActionItemsValue' Type='Lookup' List='Tasks' ShowField='ActionItems' />"
                    + "</ProjectedFields>"
                    + "</View>";
                   var web = context.get_web();
                    var list = web.get_lists().getByTitle("AssingedTasks");
                    var myQuery = new SP.CamlQuery();
                    myQuery.set_viewXml(assignedQueryTest);
                    var myItems = list.getItems(myQuery, "Include(TitleValue,ActionItemsValue)");
                    context.load(myItems);
                    context.executeQueryAsync(function () { if(myItems.get_count()>0){....}
    }, errorCallback);
    Here am able to get "AssignedTasks" list field values but not able to get "Tasks" list field values. 
    Can you please help me to resolve the issue. Or new idea for join. I have add the condition also in the query.
    If anybody have good sample, please provide.
    Thanks,
    Pariventhan
    Pariventhan.S

    Hi Pariventhan,
    I don't know about join but I have a workaround of this problem.
    Declare one variable (itemcollection) globally. Load all the items "AssignedTasks" using context.load.
    In the success method call another CAML query using <IN> tag of the ID of the items from the second list (Assuming you have look-up column of the ID of the first list to the second list).
    If this is not clear to you then please let me know. If possible then I can provide code sample.
    Thanks,
    Aniruddha

Maybe you are looking for