If database field increases in size, how to change report to display this increase?

Hello Everyone,
       I'm working with Oracle Reports 10g and have a report that was already created.  I need to increase the size of a field from 50 to 200 in width to accomadate a database change.  When i click on the field and choose properties, the width value is locked.  How do i change this?
thank you,
steven

Hi,
Change your properties of horizontal/ vertical elasticity of the frame enclosing that object to Variable instead of fixed... Now try to define the width of your field .. It can be varied now... 
Regards,
Archana

Similar Messages

  • How to change report region fields in read only mode?

    How to change report region fields in read only mode?
    skud.

    add the following javascript fuction to page header(or Javascript function and variables section)
    function disableItems(pRegionStaticId,pDisableFlag) {
      $('#'+pRegionStaticId).find('[name^=f]').each( function(){ /* matches fxx */
        if( $(this).attr('name').match(/f[0-9][0-9]/) ){
          return $(this);
      }).attr('disabled',pDisableFlag);
    pRegionStaticId is the region's static Id+
    Note that this code specifically disables only application arrays. Disabled items are not available after submission (and hence are different from readonly) . But any page javascript can modify disabled or readonly items(client side), so you must check at the server side to validate the data.
    You can disable items using
    disableItems('MY_REGION_ID' ,true);and enable them by passing false
    disableItems('MY_REGION_ID' ,false);

  • How 2 creat report for displaying the details of a Delivery Document using

    how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
    thank you
    regards,
    jagrut bharatkumar shukla
    points will be rewarded

    HI
    I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
    *& Report  ZDELIVERY                                *
    report  zdelivery  message-id z9bhu          .
    types: begin of t_likp,
               vbeln type likp-vbeln,      "Delivery
               erdat type likp-erdat,      "Date for rec creation
    *           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
    *           WAERK TYPE LIKP-WAERK,      "Currency
               kunnr type likp-kunnr,      "Ship-To Party
               kunag type likp-kunag,      "Sold-to party
               traty type likp-traty,      "Means-of-Transport
           end of t_likp.
    types: begin of t_lips,
               vbeln type lips-vbeln,      "Delivery
               posnr type lips-posnr,      "Delivery item
               matnr type lips-matnr,      "Material Number
               arktx type lips-arktx,      "Short Text for Sales Order Item
               lfimg type lips-lfimg,      "Actual quantity delivered
               netpr type lips-netpr,
    *           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
               vgbel type lips-vgbel,      "Doc no of the reference document
            end of t_lips.
    types: begin of t_vbpa,
               vbeln type vbpa-vbeln,      "SD DocumenT Number
               posnr type vbpa-posnr,      "Item number
               parvw type vbpa-parvw,      "Partner function
               kunnrb type vbpa-kunnr,      "Customer Number 1
           end of t_vbpa.
    types: begin of t_kna1,
               kunnr type kna1-kunnr,      "Customer Number 1
               name1 type kna1-name1,      "Name 1
               ort01 type kna1-ort01,      "City
               adrnr type kna1-adrnr,      "Address
           end of t_kna1.
    types: begin of t_li_vbpa,
               vbeln type likp-vbeln,      "Delivery
               erdat type likp-erdat,      "Date for rec creation
    *           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
    *           WAERK TYPE LIKP-WAERK,      "Currency
               kunnr type likp-kunnr,      "Ship-To Party
               kunag type likp-kunag,      "Sold-to party
               traty type likp-traty,      "Means-of-Transport
               vbeln1 type lips-vbeln,      "Delivery
               posnr type lips-posnr,      "Delivery item
               matnr type lips-matnr,      "Material Number
               arktx type lips-arktx,      "Short Text for Sales Order Item
               lfimg type lips-lfimg,      "Actual quantity delivered
               netpr type lips-netpr,      "Net Price
    *           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
               vgbel type lips-vgbel,      "Doc no of the reference document
               vbeln3 type vbpa-vbeln,     "SD DocumenT Number
               parvw type vbpa-parvw,      "Partner function
               kunnrb type vbpa-kunnr,      "Customer Number 1
           end of t_li_vbpa.
    types: begin of t_final,
               vbeln type likp-vbeln,      "Delivery
               erdat type likp-erdat,      "Date for rec creation
               kunnr type likp-kunnr,      "Ship-To Party
               kunag type likp-kunag,      "Sold-to party
               traty type likp-traty,      "Means-of-Transport
               vbeln1 type lips-vbeln,      "Delivery
               posnr type lips-posnr,      "Delivery item
               matnr type lips-matnr,      "Material Number
               arktx type lips-arktx,      "Short Text for Sales Order Item
               lfimg type lips-lfimg,      "Actual quantity delivered
               netpr type lips-netpr,      "Net Price
               vgbel type lips-vgbel,      "Doc no of the reference document
               vbeln3 type vbpa-vbeln,     "SD DocumenT Number
               parvw type vbpa-parvw,      "Partner function
               kunnrb type vbpa-kunnr,     "Customer Number 1
               name1 type kna1-name1,      "Name 1
               ort01 type kna1-ort01,      "City
               adrnr1 type kna1-adrnr,     "Address
               name2 type kna1-name1,      "Name 1
               ort02 type kna1-ort01,      "City
               adrnr2 type kna1-adrnr,     "Address
               name3 type kna1-name1,      "Name 1
               ort03 type kna1-ort01,      "City
               adrnr3 type kna1-adrnr,     "Address
           end of t_final.
    *            D A T A  D E C L A R A T I O N
    *&*********Internal Table Declaration****************&*
    data: it_likp type standard table of t_likp.
    data: it_lips type standard table of t_lips.
    data: it_vbpa type standard table of t_vbpa.
    data: it_kna1 type standard table of t_kna1.
    data: it_li_vbpa type standard table of t_li_vbpa.
    data: it_li_vbpa_temp type standard table of t_li_vbpa.
    data: it_final type standard table of t_final.
    *&*********Work Area Declaration********************&*
    data: wa_likp type t_likp.
    data: wa_lips type t_lips.
    data: wa_vbpa type t_vbpa.
    data: wa_kna1 type t_kna1.
    data: wa_li_vbpa type t_li_vbpa.
    data: wa_li_vbpa_temp type t_li_vbpa.
    data: wa_final type t_final.
    *&*********Data Declaration************************&*
    data: d_vbeln type likp-vbeln.
    data: flag type i value 0.
    *           S E L E C T I O N  S C R E E N   D E C L A R A T I O N
    selection-screen begin of block block2 with frame title text-001.
    select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
    selection-screen end of block block2.
    *            A T  S E L E C T I O N - S C R E E N   E V E N T S
    *AT SELECTION-SCREEN.
    *PERFORM VALIDATE_DATA.
    *            S T A R T   O F  S E L E C T I O N     E V E N T S
    start-of-selection.
    perform fetch_data.
    perform merge_data_kna1.
    *INCLUDE Z9BT_SH_***4_FORMS.
    call function 'OPEN_FORM'
    exporting
    *   APPLICATION                       = 'TX'
    *   ARCHIVE_INDEX                     =
    *   ARCHIVE_PARAMS                    =
        device                            = 'PRINTER'
    *   DIALOG                            = 'X'
    *   FORM                              = ' '
       language                          = sy-langu
    *   OPTIONS                           =
    *   MAIL_SENDER                       =
    *   MAIL_RECIPIENT                    =
    *   MAIL_APPL_OBJECT                  =
    *   RAW_DATA_INTERFACE                = '*'
    *   SPONUMIV                          =
    * IMPORTING
    *   LANGUAGE                          =
    *   NEW_ARCHIVE_PARAMS                =
    *   RESULT                            =
    exceptions
       canceled                          = 1
       device                            = 2
       form                              = 3
       options                           = 4
       unclosed                          = 5
       mail_options                      = 6
       archive_error                     = 7
       invalid_fax_number                = 8
       more_params_needed_in_batch       = 9
       spool_error                       = 10
       codepage                          = 11
       others                            = 12
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    sort it_final by vbeln.
    loop at it_final into wa_final.
    call function 'START_FORM'
    exporting
    *   ARCHIVE_INDEX          =
       form                   = 'Z9BT_DELIVERY'
       language               = sy-langu
    *   STARTPAGE              = ' '
    *   PROGRAM                = ' '
    *   MAIL_APPL_OBJECT       =
    * IMPORTING
    *   LANGUAGE               =
    exceptions
       form                   = 1
       format                 = 2
       unended                = 3
       unopened               = 4
       unused                 = 5
       spool_error            = 6
       codepage               = 7
       others                 = 8
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    call function 'WRITE_FORM'
    exporting
       element                        = 'ITEM_LIST'
       function                       = 'SET'
       type                           = 'BODY'
       window                         = 'MAIN'
    * IMPORTING
    *   PENDING_LINES                  =
    * EXCEPTIONS
    *   ELEMENT                        = 1
    *   FUNCTION                       = 2
    *   TYPE                           = 3
    *   UNOPENED                       = 4
    *   UNSTARTED                      = 5
    *   WINDOW                         = 6
    *   BAD_PAGEFORMAT_FOR_PRINT       = 7
    *   SPOOL_ERROR                    = 8
    *   CODEPAGE                       = 9
    *   OTHERS                         = 10
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    call function 'END_FORM'
    * IMPORTING
    *   RESULT                         =
    exceptions
       unopened                       = 1
       bad_pageformat_for_print       = 2
       spool_error                    = 3
       codepage                       = 4
       others                         = 5
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    endloop.
    call function 'CLOSE_FORM'
    * IMPORTING
    *   RESULT                         =
    *   RDI_RESULT                     =
    * TABLES
    *   OTFDATA                        =
    exceptions
       unopened                       = 1
       bad_pageformat_for_print       = 2
       send_error                     = 3
       spool_error                    = 4
       codepage                       = 5
       others                         = 6
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    *&      Form  VALIDATE_DATA
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form validate_data .
    select single vbeln into wa_likp-vbeln
                        from likp where vbeln in s_vbeln.
    append wa_likp to it_likp.
    if sy-subrc <> 0.
    flag = 1.
    endif.
    endform.                    " VALIDATE_DATA
    *&      Form  FETCH_DATA
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form fetch_data .
    select a~vbeln
           a~erdat
           a~kunnr
           a~kunag
           a~traty
           b~vbeln
           b~posnr
           b~matnr
           b~arktx
           b~lfimg
           b~netpr
           b~vgbel
           c~vbeln
           c~parvw
           c~kunnr
             into table it_li_vbpa
                    from likp as a
                    left outer join lips as b on a~vbeln = b~vbeln
                    inner join vbpa as c on b~vgbel = c~vbeln
                    where a~vbeln in s_vbeln and
                    c~parvw = 'RE'.
    endform.                    " FETCH_DATA
    *&      Form  MERGE_DATA_KNA1
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form merge_data_kna1 .
    if it_li_vbpa[] is not initial.
    it_li_vbpa_temp[] = it_li_vbpa[].
    sort it_li_vbpa_temp by kunnr.
    delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
    loop at it_li_vbpa into wa_li_vbpa.
    read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
    wa_li_vbpa-kunag.
    if sy-subrc <> 0.
    wa_li_vbpa_temp = wa_li_vbpa.
    append wa_li_vbpa_temp to it_li_vbpa_temp.
    endif.
    read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
    wa_li_vbpa-kunnrb.
    if sy-subrc <> 0.
    wa_li_vbpa_temp = wa_li_vbpa.
    append wa_li_vbpa_temp to it_li_vbpa_temp.
    endif.
    endloop.
    endif.
    if it_li_vbpa_temp[] is not initial.
    select  kunnr
            name1
            ort01
            adrnr into table it_kna1 from kna1
                        for all entries in it_li_vbpa_temp
                        where kunnr = it_li_vbpa_temp-kunnr.
    endif.
    loop at it_li_vbpa into wa_li_vbpa .
    wa_final-vbeln = wa_li_vbpa-vbeln.
    wa_final-erdat = wa_li_vbpa-erdat.
    *it_final-LFART = it_li_vbpa-LFART.
    wa_final-kunnr = wa_li_vbpa-kunnr.
    wa_final-kunag = wa_li_vbpa-kunag.
    *it_final-VSTEL = it_li_vbpa-VSTEL.
    wa_final-traty = wa_li_vbpa-traty.
    wa_final-vbeln1 = wa_li_vbpa-vbeln.
    wa_final-posnr = wa_li_vbpa-posnr.
    wa_final-matnr = wa_li_vbpa-matnr.
    wa_final-arktx = wa_li_vbpa-arktx.
    wa_final-lfimg = wa_li_vbpa-lfimg.
    wa_final-netpr = wa_li_vbpa-netpr.
    *wa_final-GEWEI = it_li_vbpa-GEWEI.
    *it_final-VOLUM = it_li_vbpa-VOLUM.
    *it_final-VOLEH = it_li_vbpa-VOLEH.
    wa_final-vgbel = wa_li_vbpa-vgbel.
    wa_final-vbeln3 = wa_li_vbpa-vbeln.
    *wa_final-PARVW = wa_li_vbpa-PARVW.
    wa_final-kunnrb = wa_li_vbpa-kunnrb.
    read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
    if sy-subrc = 0.
    wa_final-name1 = wa_kna1-name1.
    wa_final-ort01 = wa_kna1-ort01.
    wa_final-adrnr1 = wa_kna1-adrnr.
    endif.
    read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
    if sy-subrc = 0.
    wa_final-name2 = wa_kna1-name1.
    wa_final-ort02 = wa_kna1-ort01.
    wa_final-adrnr2 = wa_kna1-adrnr.
    endif.
    read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
    if sy-subrc = 0.
    wa_final-name3 = wa_kna1-name1.
    wa_final-ort03 = wa_kna1-ort01.
    wa_final-adrnr3 = wa_kna1-adrnr.
    endif.
    append wa_final to it_final.
    clear wa_final.
    endloop.
    endform.

  • I have change my phone language to english. but the phone shows chinese language in the internet pages and with call details. how to change it. why is this occuring?

    i have change my phone language to english. but the phone shows chinese language in the internet pages and with call details. how to change it. why is this occuring?

    If the phone is not unlocked, let's say for example it is locked to another carrier such as at&t, when you put in the Tmobile SIM in, the phone would complain about the SIM.
    Does your phone do that? If yes, then the party that sold you the iPhone4S (if you purchased it from another person) may have not done the unlocking properly, and that may explain why Tmobile is insisting on the phone being locked.
    If you purchased your iPhone4S new from Apple, did you pick Tmobile, or did you choose unlocked?
    If you picked the Tmobile choice, then it should come up ready to use.
    If you picked the unlocked choice, then you would need to visit Tmobile to purchase a nano-SIM and usually they should be more than willing to help you, since you're paying for their service.
    But as you have indicated, this phone is under AppleCare, so if it doesn't work with a supposedly good Tmobile SIM, the quickest way to fix this is to get a replacement phone. When we troubleshoot we always try the least time consuming methods first.
    You may have noticed it, that a good number of unfortunate uses of the iPhone4S have had their wifi become strangely disabled after upgrade to iOS7. Your situation is the reverse, your wifi is useable but not your cellular network.
    In the mean time, you can apply for a Google Voice account (see http://www.google.com/voice), and obtain a free North American telephone number. You can then download one of many free Google Talk applications. Set it up, and you will be able to call and receive phone calls using your wifi. This would be just for the transition period before you get a useable phone.
    Google voice provides average voice quality calls to and from US & Canada numbers for free for 1 hour per call. You can use this as a temporary work around while you are waiting for your replacement phone.
    Cheers!

  • How to change the public display name?

    How to change the public display name since the last person left the job and I am not new person take it.

    Hello,
    The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
    Please note that this forum exists to discuss TechNet Wiki as a technology/application.
    As it's off-topic here, I am moving the question to the
    MSDN and TechNet Profile and Recognition System forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Database fields empty after creating a new (Crystal) Report in MSY

    Hello,
    I have some issues to use Crystal Reports in Mobile Sales Maintenance (MSY). The situation is as follows
    My example is based on this standard report, which is working
    Report Name: BPartnerActivities
    Reporting Tool: Crystal Reports
    Category: Standard reports
    Subcategory: Lists
    Report Type: Report
    Data Source: Business Content provider
    Business Content Provider: BPActivities
    My requirement is to build a new report, which is based on the standard "BPartnerActivities" Report. If I use the "copy" functionality, I get an working Copy of the standard report. However, I need to modify the Business Content Provider, but I do not want to make the modifications on the standard content provider "BPActivities".
    I am now forced to used the "copy" functionality to create a copy from "BPActivities" for my own Content Provider "My BPActivities copy", which I want to use in a new report.
    Issue:
    I cannot modify the defined Business Content Provider after using the "copy" functionality and hence forced to create a new report from scratch to be able to set a different Content Provider.
    I create my own report "MyBPartnerActivities" based on the standard report "BPartnerActivities" using the same settings and assign my new business content provider.
    If I use the "Design Report" or "Modify Report" button, the Crystal Report designer pops up. Now the problem, the Crystal Report designer does not offer me any data below "Database fields".
    In the standard report, the "Database fields" has a child element "BOACTIVITY-ttx" with several field options. My own created report from sratch does now have anything?!
    Why my report does not offer my any data or is there anything additional to do?
    Another Test
    I tried to create another report using the standard content provider "BPActivities", but I have still the same issue.
    In addition I recongized that the "browse data" fuctionality does not work on the fields in the standard report. The path to the database file does not exist. It starts with "C:\WINNT\...", but my system has "C:\WINDOWS\...". But the executed report is able to retriev the data?!
    Unfortunately was not able to find any proper documentation, but I would really appreciate any help.
    Regards,
    Andreas

    Update
    It looks like that the *.ttx file is not uploaded/create to/on the MSY system. The system shows the file in the Crystal Report Designer, but there is no file on the file system. The confusing thing is, that any standard report is still working and does not really complain about a missing ttx file. I think the content of the ttx file is somehow embeded to the report.
    Does someone know how the system should behave? Should a ttx file be automatically created & assigned to any new report or do I have to create the file by my own every time?
    Cheers,
    Andreas

  • How to Change Report Font Size in 11i

    Hi,
    Please let me know how to change font size of an existing report in Quick steps.
    Basically the printed report font size is too small. We change the font size from the printer but still it dose not change.
    We have 11i on Unix Server and a dot matrix printer.
    The report is character based and Report Builder shows Courier 10, print style is Portrait. We need it to be 12-14.
    Thanks!

    Hi,
    Refer to the following document.
    Note: 467568.1 - How To Change The Font, Size, or Page Layout of Standard and FSG Reports
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=467568.1
    Regards,
    Hussein

  • How to change report size from A4 to A3 in Report 6i

    I want to change the size of an existing report in Report 6i from A4 to A3 size. How to go about it? Thank in advance.
    Anil chopra

    Hello Anil,
    Have you tried to click on the property palette of the 'Main Section' under 'Layout Model'. There you can set the Report Width and Height.
    -Marilyn

  • How to change report displayname at runtime when run from the report server?

    hi all,
    with the reportviewer widget in a winforms app, i'm able to change report displayname at runtime by handling thesubmittingparametervalues event like so:
            private void reportViewer1_SubmittingParameterValues(object sender, ReportParametersEventArgs e)
                string po = e.Parameters["Order"].Values[0];
                this.reportViewer1.ServerReport.DisplayName = "Load Out - " + po + " - " + DateTime.Now.ToShortDateString();
    question: how do i achieve the same thing when the report is run via the ssrs reportserver website?
    thanks for any tips,
    sff

    Hi sherifffruitfly2,
    According to your description, you want to change the display name of report in Report Manager. Right?
    In Reporting Services, we can't make the report file name dynamically. But we have Build-in Fields to show report name and execution time in a report. We can add a textbox and put in the expression below:
    ="Load on- "+Globals!ReportName+" "+Globals!ExecutionTime
    It will show the report name with execution time when we run the report:
    Reference:
    Built-in Collections in Expressions (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How to make Reports 9i display Danish national characters?

    I am running Oracle9i Reports and cannot make Reports print the Danish national characters f, F, x, X, e and E. I have a development machine with Developer Suite 9.0.2, where I can run the report in Paper Design, where the characters displays correctly, but as soon as they are uploaded to the Application Server (9.0.2), all of the national characters are replaced with some very mysterious characters. The dev. machine and the Oracle9iAS machine both connect to the same database, and when I make a boilerplate object just containing "FXE", the problem is still there, so it does not seem to be a database issue.
    I read some articles on MetaLink about adding some lines in uifont.ali, but they do not seem to apply, since the article only mention East-European languages (Polish and Czech). The font used is Times New Roman. The dev. machine has NLS_LANG set to AMERICAN_AMERICA.WE8MSWIN1252, and the Oracle9iAS machine is running DANISH_DENMARK.WE8MSWIN1252 - ie. the same character set. I tried to generate the report both to HTML and PDF, but that did not make any difference regarding this issue.
    How do I make Oracle9i Reports Services display the Danish national characters correctly?
    Thanks in advance!

    Thanks for your suggestions.
    However, here's what I've done, and it did not make any difference.
    1. Changed the NLS_LANG parameter to match on both server and dev. machine and recompiled and saved the RDF - no difference.
    2. Installed the same model printer on the server, as the one on the development machine, and rebooted the server - no difference.
    3. Checked uifont.ali on both systems - they're exactly the same...
    What else might be causing this?

  • HT4623 how to change from enlarged display to normal display on IPHONE5

    how to change enlarged display to normal display on IPHONE 5

    Settings > General > Accessibility > Zoom.
    This can also be changed when the iPhone is connected to iTunes. Available under the Summary tab for the iPhone sync preferences with iTunes below Options > Configure Universal Access.

  • How to change Report Server Name???

    How can I change my reports server name which is normally generated according to Server Name_OracleHome combination. But can I use a different name for my report server and which configuration files I'll have to change???

    How can I change my reports server nameSee Paulo Esteves answer in How to change the Report Server Name?

  • How to change font while displaying data through an ALV table in WDA?

    Hi all,
    I am displaying data through and ALV table. Now I want to change the FONT only for few rows. Is this possible?
    If so then do the needful to me..
    Thanks & Regards,
    Yugesh A.

    I believe as you have found 'LVC_FIELDCATALOG_MERGE' would only work with the classic dynpro (SAPGUI based) version of the ALV. 
    You won't be able to control the font the same way in the WDA version of the ALV.  You will need to create a custom cell editor for the column(s) in question.  You can then bind context attributes to the properties of the cell editor. You will need extra attributes in your bound context to control these settings on the row level.  Also you will be restricted by the changing the DESIGN property. This means only the values allowed for the DESIGN of the particluar UI element.  For a TextView that wouldn't be the font directly (the font of course comes from the Theme).
    DATA l_salv_wd_table TYPE REF TO iwci_salv_wd_table.
      l_salv_wd_table = wd_this->wd_cpifc_alv_adv( ).
      DATA l_table TYPE REF TO cl_salv_wd_config_table.
      l_table = l_salv_wd_table->get_model( ).
      data textview type ref to CL_SALV_WD_UIE_TEXT_VIEW.
      l_column = l_table->if_salv_wd_column_settings~get_column( 'ADD_PARTICIPANTS' ).
      create object textview.
      textview->SET_TEXT_FIELDNAME( 'ADD_PARTICIPANTS' ).
      textview->set_design_fieldname( 'ADD_DESIGN' ).
      textview->set_wrapping( abap_true ).
      l_column->set_cell_editor( textview ).
    DESIGN supports the following options:
    Value
    Visual Display
    Description
    emphasized
    Text is highlighted in default size
    groupTitle
    Header for forms
    This enumeration value is deprecated. Instead, use SectionHeader.
    header1
    Text is highlighted with font size +4 in relation to the default font size.
    header2
    Text is highlighted with font size +5.08 cm relation to the default font size.
    header3
    Text is highlighted in default size
    header4
    Text is highlighted in font size -1 (small) in relation to the default font size (like the legend but highlighted)
    label
    Text is display in the default font type. A space is always inserted after the text.
    label_small
    Text is displayed in default font type, as with label, onyl that font size is -1 (like the font size for header4).
    legend
    Text is displayed with default font type in size -1.
    reference
    Text is in italics and in default font size.
    standard
    Text is displayed in default font size. No text attributes are defined for this value.
    monospace
    Text is displayed in no-proportional font type. Each letter takes up the same space.

  • How to change Reports where clasue

    Hi
    How can I change Report's where clause If I'm calling it from Oracle Forms.
    Oracle Version 9.0.2.9.0
    Any ideas please?
    Thanks!

    I guess this questions belongs to Reports Forum?
    But anyways, you can create a host/bind variable, and emmbed it into your query definition statement like this:
    SELECT columns
    FROM yourtable
    &WhereVariable
    .. where wherevariable is the name of your bind variable.

  • Field-Dominance automatically 'Upper', how to change?

    Hi!
    Recently I discovered that the Field Dominance (FD) setting of my sequence/projects is automatically 'Upper'. Also when I capture from VHS, the FD of the clips in my project is always 'Upper'.
    But most of the time I want the FD to be 'Lower', because I often use PAL and DV.
    I've searched the Preference menu and the FCP User Manual, but I cannot find an option where I can set the FD standard to 'Lower'.
    Is there such an option or do I need to change the FD manually every time?

    I think so long as everything is the same field dominance and matches to your settings you're okay. The first time I came across the problem was importing DV PAL (lower ) into a sequence that was mostly SP Beta PAL (Upper) and the sequence was set for 8 bit uncompressed PAL (upper). The flickering of the DV PAL footage was only evident on the external monitor, it looked fine on the computer screen and it didn't matter how much I rendered or tried flicker filters it just wouldn't change. The only thing that worked was the Nattress "Field" plug in. It's in Filter Set 1 - http://www.nattress.com/set1.htm

Maybe you are looking for