IF ELSE Statement in BEx Query based on the results

Hi experts,
I want to realize the following IF/ELSE statement in a BEx Query in respect to the result values
If the result of KF1 equals 0, than set the KF2 to 0, Else (KF1 NE 0) show the value of KF2
Background: I want to report the order backlog. In the example above we have an incoming order value of 23.700,80 EUR in periode 12.2013 and an turnover of 22.370,80 EUR in periode 01.2014. The order backlog in ST (KF1) is 1 ST (12.2013) - 1 ST (01.2014) = 0 ST. The order backlog in EUR (KF2) is 23.700,80 EUR (12.2013) - 22.370,80 EUR (01.2014) = 1.330 EUR. The Order and Invoice is finished, but we have an positive order backlog in EUR (reason: less turnover as incoming order).
For this case I want to realize the IF/Else statement to check if the oder backlog in ST = 0, if yes, than set the order backlog in EUR also to 0.
Any best practices?
Many thanks and best regards,
Michael

Hi Suman,
thanks aigain for your reply!
I have tried your proposal before you have posted it.
In my special case the following if/else statement works successfully:
CKF = calculated key figure
Formula1 = (CKF1 == 0) * 0 + (CKF1 <> 0) * CKF2
In my case the CKF2 is the result value from "Incoming Order value" - "Turnover"
So I had to define a separate Formula (1:1 equals to CKF2) and then I was able to set "*CKF2" in the statement.
The statement CKF2 = (CKF1 == 0) * 0 + CKF2 is not possible (because it´s not possible to calculate from CKF2 itself).
Now it works
Best regards,
Michael

Similar Messages

Can I precalculate a BEx query and email the results as an attachment?

We are on BW 3.5, currently pulling data from R/3 4.6C (but upgrading to ECC 6.0 in mid-July). I have been successful (once, once I was able to talk my email administrator into letting a .js file through) in sending an email, but the results are in HTML in the body of the email. I need to send the results as an Excel spreadsheet attachment. From all of the SAP documentation I've read, it seems this should be possible, but I haven't been able to make it happen. It seems to ignore the setting in the Broadcast scheduling screen. I've tried it with both "Execute" and time-based scheduling.
Many thanks for any documentation, pointers, or magic tricks.

Hi,
This can be done via Information Broadcasting.
Pls check
http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/frameset.htm
For Bi 7
http://help.sap.com/saphelp_nw70/helpdata/en/a5/359840dfa5a160e10000000a1550b0/frameset.htm
Eddy
PS. Reward useful answers and earn points yourself

IF THEN ELSE STATEMENT IN BeX Query designer

Hi,
I want to write a query as follows:
IF <Value a> is available THEN <Value a> ELSE <Value b>
I have written it as follows:
(X>0)X+(X<=0)Y
The problem with this equation is, in case X = 0(number Zero) then Y is not getting displayed. But In case X =NULL (or no values) then Y displayed. This is leading to inconsistency in final result. Please help in rectifying the formula incase it is incorrect or is it because of some program bug in BeX?
Regards
Madhav

This works for me...dont understand y its not working with u!!
it is simple:
(X<>0)X+(X==0)Y
If X is 0, then 0X + 1Y = Y
else
1X + 0Y = X.
What result you are getting in both cases?
as you thing,X value is may not be 0 in your case. It may be 0.00004...something like that...Set Decimal Places to 5 or 6 to X.
Message was edited by:
Muralidhar C

IF...ELSE.. STATEMENT in BEx Query Designer

Hi,
Why there is no IF, ELSE function in BEx Query Designer?
Assuming I need to write the following logic, how can it be accomplished?
IF (A=0 OR B=0)
    THEN 0
ELSE IF ( B/A <0)
    THEN '       *'
ELSE
    B/A * 100
i.e.
if A or B is equal to 0, then display the value of 0
else if B is negative (as A is either 0 or positive), then display the following text: '         *'
otherwise, display the value of B/A * 100
Thanks!

Hi,
You can achieve this by creating a new formula.
You have to use the boolean operations and mathematical functions. But we cannot display *. u have to display some value for that.
Khaja

BEx query based on virtual cube donu00B4t display a valid List of Value (LOV)

Hello
I have a problem with an invalid LOV. The scenario is the following; There´s a BEx query based on a virtual cube. The query has an exit variable on caracteristic that is based on 0CALMONTH.
At Universe Designer I simply create a connection, a universe based on this query and export.
At Web Intelligence (also at Live Office), when I try to execute de query, the prompt to fill my exit variable display a list of value that doesn´t match with the values of the caracteristic at the cube.
Actually, the list at the prompt starts with 01.0000 and finishes with 05.0968.
In Universe Designer, the option to edit the list of values is not available. But I think that editing the LOV is not the correct way.
I´ve tried creating a new query based on the DSO that is the source of the virtual cube. In this case, I had a valid list. Unfortunately, I can´t use this DSO.
Did anyone already have this problem?

Hi James,
can you explain what you mean with "input length for that filed" ?
The field in the table is varchar2(120). I coudn't found options for the List of value.
Thanks for your response
Carsten
null

RWI 00200 Error while scheduling the Bex Query based Webi report

Dear All,
I am facing the below error while scheduling the Bex Query based Webi report.
Error:RWI 00200
We are using BO XI 4.0 Sp05.
Please advise

Hi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma

Filter a Query Based on the Output of Another Query

Is it possible to run a query based on the put put of another query? I have two queries. One query is based on GL Line items and shows the account assignemnt of postings where a customer has had a debt raised and it been credited to an account assignment e.g. Order, Cost Centre or Profit Centre. The other query is on an AR cube and that shows payment made. I want to bring these together to show the owners of the various account assignments to what extent customers have actually paid the debts that have been raised and credited to them. This I do as the source document of the CO doscument matches the allocation of the ar document. So I have a query that shows the CO journal and another query that shows payments. But I only want to show the payments in the second query for documents displayed in the first query (which can be restricted by period and fiscal year and the particular account assignment).

Hi,
This can be acheived by usign a replacement path variable.
Create replacement pathe variables for those the filter values in the second report nneds tobe restricted from the first.
Then in the properties of the varioable say replce by query result and input the first query name in it.
Use these variables in teh filter section of the second report.
Make sure the characteristics for which you created the replacement path variables are in teh row section of the first Query.
Now on executing the second query you will have it filtered based on teh values of the first Query.
Hope this helps.
Regards.
Shafi.

How to make a report based on the result of another report?

Hi, All,
I am a new guy in BW development
I made the report1, to show the "Total Sales in each country and each shop "
(the fact table is "Order")
now I want to make report2 "in each countries, the number of the shops, whose Total Sales >100000"
Can I make the report2 based on the result of report1 (use the same fact table)
thanks a lot
QY

Hi Klaus,
your condition only works if the Shop is in the query. If I understood it correctly you have one query with
Country   Shop   Total Sales
and one with
Country   Number of Shops   Total Sales
and you don't want to restrict the second Total Sales but the Total Sales from the first query.
Best regards
   Dirk

OBIEE Report - filter based on the result from another analysis

Hi,
I am using OBIEE 11g,
I am trying to use a filter which is based on the result from another analysis. I have an analysis A which is as table 1, and I want to filter the respective columns of analysis B (Table B) based on analysis A to remove the duplicates for march 01, 02, and 07 , but it is not working properly. I took a max of start and end time when I created analysis A. Please let me know if I did anything wrong. thanks.
Table 1
Employee Number
Date
IN
Out
Start Time
End Time
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
2015-02-27
12:00
18:00
00:00:00
00:00:00
2015-02-28
8:00
14:00
00:00:00
00:00:00
2015-03-01
14:00
20:00
14:00:00
20:00:00
2015-03-02
16:00
20:00
16:00:00
20:00:00
2015-03-07
14:06
20:02
14:00:00
20:00:00
2015-03-11
16:00
20:00
16:00:00
20:00:00
2015-03-14
8:00
14:00
00:00:00
00:00:00
2015-03-25
14:00
20:00
16:00:00
20:00:00
Table 2
Employee Number
Date
IN
Out
Start Time
End Time
Hours
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
-3
2015-02-27
12:00
18:00
00:00:00
00:00:00
6
2015-02-28
8:00
14:00
00:00:00
00:00:00
6
2015-03-01
14:00
20:00
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-02
16:00
20:00
00:00:00
00:00:00
4
16:00:00
20:00:00
4
2015-03-07
14:06
20:02
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-11
16:00
20:00
16:00:00
20:00:00
4
2015-03-14
8:00
14:00
00:00:00
00:00:00
6
2015-03-25
14:00
20:00
16:00:00
20:00:00
4

Why avg here?
What columns you want to show in the report?
for a employee for given date if he have 2 rows then you may sum up hours right?
Employee Number
Date
IN
Out
Start Time
End Time
Hours

How can i pass a parameter to the query to filter the result of this lookup

Hello,
i'm developping a web application with JDeveloper 10.1.2 and JHeadStart.
i realy need to know how can i filter the lookup (LOV) query result.
in other word, when i click on the lookup, it show all the row that exist in may data base table.
what i want is how can i pass a parameter to the query to filter the result of this lookup ?
Thank you

Hi,
have a look if this helps
http://oracle.com/technology/products/jdev/tips/fnimphius/restrictlovlist/restrictlov.html
Frank

IF and ABS condition statement in BEX query designer

Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
Arnold

Hi Arnold,
Thank you,
Nanda

Where to write IF THEN ELASE statements in BEX Query Designer

Hi All,
I need to write a formula in query designer...
saying that to display the all Quantities in KGs.. Now articles are in Grams and KGs...
So here i need to perform calculation like... if article is in KGs divide by 1, else if article is in Grams divide by 1000.
where can i write this logic to perform calculation ...
Thanks in advance..
ravi.p

hi chetan,
No its not work.. why because i need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'. this is attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
I can change these values in update rules by writting Routine.. But I need to convert it in KGS at BEX Query Designer Level..
I need calculate like this
quantity sold * Gross Weight.
here Gross Weight is the formula variable which replacing the values of gross weight...
i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
is there any solution to solve this Problem...

How to use IF ELSE statement in one QUERY to MS ACCESS

System.out.println("Enter Final Exam: ");
int f = Integer.parseInt(input.readLine());
command.executeUpdate("UPDATE Students SET Final_Exam='"+f+"',Raw_score=(QT+MT+Final_Exam)/3 WHERE stud_name='"+stdID+"'");
command.executeUpdate("UPDATE Students SET Raw_score=(QT+MT+Final_Exam)/3 WHERE stud_ID='"+stdID+"'");
if (rsf==100)
command.executeUpdate("UPDATE Students SET Final_Grade=1.0 WHERE stud_ID='"+stdID+"'");
else if(rsf < 100 && rsf > 90)
command.executeUpdate("UPDATE Students SET Final_Grade=2.0 WHERE stud_ID='"+stdID+"'");
else
command.executeUpdate("UPDATE Students SET Final_Grade=5.0 WHERE stud_ID='"+stdID+"'");How can I shorten my code using a IF ELSE statement inside a single query or two? Or is it possible?
Edited by: ivatanako on Sep 28, 2007 11:55 PM

Sun has tutorial trail for JDBC, you might want to browse through that; you'll get more details and samples there than here. Here's the link to the section on PreparedStatement: http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
----------------------------------------------------------------

IF-ELSE statement in BI Query

Hi guys i have a requirement where in i have condition as mention below...
If say X=0 then Y=0 and
if X>0 then y=1
where X is key figure value...to be compared ..
can any one suggest me the logic as to how i need to design this in the query..any option of using IF-ELSE statement...
an in the result if Y=0 then i should show as a * (star)..how can we do this in the query?
can any one suggest me a solution for this please..
Rgds
Shilpa

shipa,
please check these links
[Defining Exceptions|http://help.sap.com/SAPHELP_NW04S/helpdata/EN/43/21b4cd14cd06f4e10000000a422035/frameset.htm]
[Defining and Changing Exceptions|http://help.sap.com/saphelp_nw04/helpdata/EN/c2/f6843b49f6a40de10000000a11402f/content.htm]

IF ELSE statement in BEX

Hi all,
I need to write a formula in a query using IF ELSE statements. Here is my senario
I need to write a IF ELSE statement to calculate a KF i.e., % variance of This year with last year sales (TY%LY) .Following are the conditions.
IF LY<0 then TY % LY should be (TY-LY)/LY * (-100)
IF LY>0 then TY% LY should be (TY-LY)/LY * (100)
IF LY =0 then TY%LY should be 100
IF LY=NULL (i.e., if store is closed last year we donu2019t pull record so LY will be empty) then TY%LY should be 100
IF TY=0 or NULL then TY%LY should be -100
So I tried writing as follow but getting errors
(LY<0)(TY-LY)/LY(-100) + (NOT(LY<=0))((TY-LY)/LY)100 + (LY==0)100 + NODIM(LY)100 + (TY==0)(-100) + NODIM(TY)(-100)
But it is giving errors. Can you please suggest me how to write that formula without effecting the current performance of the query.
Thanks in Advance,
Preethi

Hi Preethi,
I think that you can accomplish the desired results using the following formulas:
KEY FIGURE = NOT(F1=0) * F5 + (F1=0) * -100
F1 = NOERR(TY + 0)
F2 = NOERR(LY + 0)
F3 = NOERR( (F1-F2) / F2 ) * -100
F4 = F3 * -1
F5 = (F2<0) * F3 + (F2>0) * F4 + (F2=0) * 100
I hope it helps you.
Regards,
Maximiliano

IF ELSE Statement in BEx Query based on the results

Similar Messages

Maybe you are looking for